The time now is Sun 17 Jan 2021, 21:07
All times are UTC - 4 |
| Author |
Message |
Billtoo
Joined: 07 Apr 2009
Posts: 3721
Location: Ontario Canada
|
 Posted: Wed 18 Jun 2014, 01:05 Post subject:
slacko-6.0 alpha
Subject description: running internet apps as spot |
|
When I first booted up Slacko one of the options in the first run
settings is to "run internet apps as spot", I checked that box.
After seeing James success with getflash I am now running firefox as
root and the flashplugin is working fine.
I first reported this back in Slacko64, problem is still there but not
as bad as Slacko64 because firefox runs well as spot apart from the
flashplugin problem, in Slacko64 running the browser as spot slows
connecting to web sites to a crawl.
|
|
Back to top
|
|
 |
01micko
Joined: 11 Oct 2008
Posts: 8787
Location: qld
|
| Posted: Wed 18 Jun 2014, 01:07 Post subject:
|
|
James
From CD, does it boot fast? That is.. is it reading the CD for the Puppy_slacko-5.9.1.sfs or the hard drive? CD=slow, HD=fast boot. Maybe the hard drive drivers aren't getting loaded in initrd. Is it a new hard drive or motherboard? (thinking along the lines of hard drive controller).
BTW, logs seem ok.
_________________
Puppy Linux Blog - contact me for access
|
|
Back to top
|
|
|
01micko
Joined: 11 Oct 2008
Posts: 8787
Location: qld
|
| Posted: Wed 18 Jun 2014, 01:11 Post subject:
|
|
| James C wrote: | | Not a save issue. Latest Tahr builds and this Slacko will not boot a fresh frugal install (no savefile). Immediate kernel panic. Will boot from cd with savefile though. |
Yep. Edited my post. Left 'save' there as those logs are relevant for that circumstance too.
_________________
Puppy Linux Blog - contact me for access
|
|
Back to top
|
|
|
James C
Joined: 26 Mar 2009
Posts: 6735
Location: Kentucky
|
| Posted: Wed 18 Jun 2014, 01:18 Post subject:
|
|
Obligatory screenshot.
| Description |
|
| Filesize |
59.37 KB |
| Viewed |
955 Time(s) |
|
|
|
Back to top
|
|
|
01micko
Joined: 11 Oct 2008
Posts: 8787
Location: qld
|
| Posted: Wed 18 Jun 2014, 01:24 Post subject:
|
|
| me wrote: | | From CD, does it boot fast? |
Just to add to this. Hide any save files made from slacko and make sure puppy_slacko-5.9.1.sfs is on the root of a partition. Boot of optical drive with no pfix= params. Does it load the main sfs of the CD/DVD or the HDD? Again, I should be able to tell from the logs so if you don't mind post them from that scenario please.
_________________
Puppy Linux Blog - contact me for access
|
|
Back to top
|
|
|
James C
Joined: 26 Mar 2009
Posts: 6735
Location: Kentucky
|
| Posted: Wed 18 Jun 2014, 01:26 Post subject:
|
|
| 01micko wrote: | James
From CD, does it boot fast? That is.. is it reading the CD for the Puppy_slacko-5.9.1.sfs or the hard drive? CD=slow, HD=fast boot. Maybe the hard drive drivers aren't getting loaded in initrd. Is it a new hard drive or motherboard? (thinking along the lines of hard drive controller).
BTW, logs seem ok. |
Just copied the main sfs and zdrive to the partition (instead of a folder), rebooted cd and successfully booted.Seemed a bit slow.
Same old mobo and hard drive ...did add a second hdd but using sda only for Puppy.
|
|
Back to top
|
|
|
James C
Joined: 26 Mar 2009
Posts: 6735
Location: Kentucky
|
| Posted: Wed 18 Jun 2014, 01:45 Post subject:
|
|
| 01micko wrote: | | me wrote: | | From CD, does it boot fast? |
Just to add to this. Hide any save files made from slacko and make sure puppy_slacko-5.9.1.sfs is on the root of a partition. Boot of optical drive with no pfix= params. Does it load the main sfs of the CD/DVD or the HDD? Again, I should be able to tell from the logs so if you don't mind post them from that scenario please. |
Moved the main sfs and z drive to different partition(Mint partition actually), hid savefiles and.booted cd with no parameters.
Looks like it picked up the puppy_slacko_5.9.1.sfs from sda2 and not the cd.
| Description |
|
Download |
| Filename |
logs-puppypc21020.tar.bz2 |
| Filesize |
1.79 KB |
| Downloaded |
454 Time(s) |
|
|
Back to top
|
|
|
01micko
Joined: 11 Oct 2008
Posts: 8787
Location: qld
|
| Posted: Wed 18 Jun 2014, 02:08 Post subject:
|
|
Ok, we can determine that the driver for the hdd is loaded too late. That driver should be built into vmlinuz (and in tahr is probably missing from init.gz). Output of lsmod and lspci -nn will be handy now to figure out what module to make a builtin. Thanks.
_________________
Puppy Linux Blog - contact me for access
|
|
Back to top
|
|
|
James C
Joined: 26 Mar 2009
Posts: 6735
Location: Kentucky
|
| Posted: Wed 18 Jun 2014, 02:11 Post subject:
|
|
As an experiment, did a frugal install directly to the root of sdb3, quick fix of menu.lst and it boots no problem.
If i follow my normal procedure of putting all files in a folder ....immediate kernel panic.Root of the partition...... no problem.
| Description |
|
Download |
| Filename |
logs-puppypc15212.tar.bz2 |
| Filesize |
1.5 KB |
| Downloaded |
444 Time(s) |
| Description |
|
| Filesize |
25.42 KB |
| Viewed |
902 Time(s) |
|
|
|
Back to top
|
|
|
James C
Joined: 26 Mar 2009
Posts: 6735
Location: Kentucky
|
| Posted: Wed 18 Jun 2014, 02:13 Post subject:
|
|
| 01micko wrote: | | Ok, we can determine that the driver for the hdd is loaded too late. That driver should be built into vmlinuz (and in tahr is probably missing from init.gz). Output of lsmod and lspci -nn will be handy now to figure out what module to make a builtin. Thanks. |
| Code: | # lsmod
Module Size Used by
iptable_mangle 897 0
iptable_nat 2596 0
nf_nat 9469 1 iptable_nat
xt_conntrack 2338 4
ipt_REJECT 1502 1
nf_conntrack_ftp 3994 0
nf_conntrack_irc 2316 0
iptable_filter 769 1
xt_state 796 0
nf_conntrack_ipv4 7221 7 nf_nat,iptable_nat
nf_defrag_ipv4 800 1 nf_conntrack_ipv4
nf_conntrack 38525 7 nf_nat,xt_state,xt_conntrack,nf_conntrack_ftp,nf_conntrack_irc,iptable_nat,nf_conntrack_ipv4
ip_tables 6897 3 iptable_filter,iptable_mangle,iptable_nat
mperf 804 0
snd_hda_codec_realtek 41728 1
serio_raw 2986 0
pcspkr 1248 0
k8temp 2352 0
nouveau 592450 2
mxm_wmi 1032 1 nouveau
video 9539 1 nouveau
ttm 36701 1 nouveau
drm_kms_helper 23699 1 nouveau
drm 138938 4 ttm,drm_kms_helper,nouveau
i2c_algo_bit 3732 1 nouveau
shpchp 18062 0
snd_hda_intel 17282 0
forcedeth 42067 0
snd_hda_codec 57223 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 3804 1 snd_hda_codec
snd_pcm_oss 26252 0
snd_mixer_oss 9788 1 snd_pcm_oss
snd_pcm 47741 3 snd_pcm_oss,snd_hda_codec,snd_hda_intel
snd_page_alloc 4802 2 snd_pcm,snd_hda_intel
snd_seq_dummy 912 0
snd_seq_oss 19048 0
snd_seq_midi 3117 0
snd_seq_midi_event 3633 2 snd_seq_oss,snd_seq_midi
snd_rawmidi 11986 1 snd_seq_midi
snd_seq 32202 6 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy,snd_seq_midi
snd_timer 11650 2 snd_pcm,snd_seq
snd_seq_device 3589 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_seq_dummy,snd_seq_midi
snd 34220 12 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_oss,snd_seq_device,snd_mixer_oss
soundcore 3347 1 snd
i2c_nforce2 4009 0
i2c_core 12539 5 drm,drm_kms_helper,i2c_algo_bit,nouveau,i2c_nforce2
wmi 5812 2 mxm_wmi,nouveau
thermal 6132 0
evdev 6295 0
button 3391 1 nouveau
processor 22393 0
thermal_sys 9703 3 video,thermal,processor
hwmon 886 3 k8temp,nouveau,thermal_sys
# |
|
|
Back to top
|
|
|
James C
Joined: 26 Mar 2009
Posts: 6735
Location: Kentucky
|
| Posted: Wed 18 Jun 2014, 02:14 Post subject:
|
|
| 01micko wrote: | | Ok, we can determine that the driver for the hdd is loaded too late. That driver should be built into vmlinuz (and in tahr is probably missing from init.gz). Output of lsmod and lspci -nn will be handy now to figure out what module to make a builtin. Thanks. |
| Code: | # lspci -nn
00:00.0 RAM memory [0500]: nVidia Corporation MCP67 Memory Controller [10de:0547] (rev a2)
00:01.0 ISA bridge [0601]: nVidia Corporation MCP67 ISA Bridge [10de:0548] (rev a2)
00:01.1 SMBus [0c05]: nVidia Corporation MCP67 SMBus [10de:0542] (rev a2)
00:02.0 USB Controller [0c03]: nVidia Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2)
00:02.1 USB Controller [0c03]: nVidia Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2)
00:04.0 USB Controller [0c03]: nVidia Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2)
00:04.1 USB Controller [0c03]: nVidia Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2)
00:06.0 IDE interface [0101]: nVidia Corporation MCP67 IDE Controller [10de:0560] (rev a1)
00:07.0 Audio device [0403]: nVidia Corporation MCP67 High Definition Audio [10de:055c] (rev a1)
00:08.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Bridge [10de:0561] (rev a2)
00:09.0 IDE interface [0101]: nVidia Corporation MCP67 AHCI Controller [10de:0550] (rev a2)
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP67 Ethernet [10de:054c] (rev a2)
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0562] (rev a2)
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:0d.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:0e.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:0f.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:10.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:11.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:12.0 VGA compatible controller [0300]: nVidia Corporation C68 [GeForce 7050 PV / nForce 630a] [10de:053b] (rev a2)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
# |
|
|
Back to top
|
|
|
James C
Joined: 26 Mar 2009
Posts: 6735
Location: Kentucky
|
| Posted: Wed 18 Jun 2014, 02:17 Post subject:
|
|
Testing is fun........ 
|
|
Back to top
|
|
|
James C
Joined: 26 Mar 2009
Posts: 6735
Location: Kentucky
|
| Posted: Wed 18 Jun 2014, 02:26 Post subject:
|
|
.
| Description |
|
| Filesize |
67.31 KB |
| Viewed |
873 Time(s) |
|
|
|
Back to top
|
|
|
James C
Joined: 26 Mar 2009
Posts: 6735
Location: Kentucky
|
| Posted: Wed 18 Jun 2014, 02:44 Post subject:
|
|
Other than the minor kernel panic problem things are working pretty well.....
| Description |
|
| Filesize |
66.17 KB |
| Viewed |
982 Time(s) |
|
|
|
Back to top
|
|
|
Billtoo
Joined: 07 Apr 2009
Posts: 3721
Location: Ontario Canada
|
| Posted: Wed 18 Jun 2014, 03:10 Post subject:
|
|
| James C wrote: | | Other than the minor kernel panic problem things are working pretty well..... |
Just wondering, if you go to "/setup/QuickSetup first run settings" and
check the "Run Internet apps as spot" box, does it break the
flashplugin and cause Firefox to crash?
|
|
Back to top
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Profile
Log in to check your private messages
Log in
Forum index » Advanced Topics » Puppy Projects
