X-precise-2.4 Final

For talk and support relating specifically to Puppy derivatives
Message
Author
User avatar
rg66
Posts: 1158
Joined: Mon 23 Jul 2012, 05:53
Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!

#281 Post by rg66 »

laika wrote:Am I by any chance over looking an an easy graphic menu editor for the main applications menu? Hate to ask another stupid question, but even finding the config files for that menu in xfce is proving to be an undertaking.
I'll happily edit by hand if I find it.

Beyond that X-precise-2.2 has become my daily driver on my main box, and I may switch my old laptop over. This is one fine little pup.
Geoffrey has converted his xmenumaker app for X-precise, it can be downloaded here: http://carolina-linux.com/rg66/X-precis ... recise.pet, Right click and "Save Link As". X-precise-2.3 will have an updated version included.

The .desktop files are in /usr/share/applications and the menu files are in /etc/xdg/menus
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]

User avatar
laika
Posts: 113
Joined: Tue 16 Jan 2007, 00:58

#282 Post by laika »

Thanks, rg66!

Yeah, there is so much confusing info out there about those xfce config files. Lots of it seems to mention files that don't seem to be present on X-Precise. Anyway, if I get too frustrated, I now have Geoffrey's Xmenumaker to fall back on. But I'll give the files you mention another go first, just to learn something new.

Thanks again. And might as well say it again, X-Precise is a jewel of an OS!

gcmartin

#283 Post by gcmartin »

Ran PAE V2.2 of every 32bit laptop I have. Works without any issues.

Great effort @RG66

User avatar
Geoffrey
Posts: 2355
Joined: Sun 30 May 2010, 08:42
Location: Queensland

#284 Post by Geoffrey »

Updated Nomacs image viewer to Version 1.6.4 in this post http://murga-linux.com/puppy/viewtopic. ... 727#757727
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]

pchan
Posts: 130
Joined: Fri 12 Oct 2012, 12:17
Location: Kuala Lumpur, Malaysia

#285 Post by pchan »

rg66 wrote:
laika wrote:Am I by any chance over looking an an easy graphic menu editor for the main applications menu? Hate to ask another stupid question, but even finding the config files for that menu in xfce is proving to be an undertaking.
I'll happily edit by hand if I find it.

Beyond that X-precise-2.2 has become my daily driver on my main box, and I may switch my old laptop over. This is one fine little pup.
Geoffrey has converted his xmenumaker app for X-precise, it can be downloaded here: http://carolina-linux.com/rg66/X-precis ... recise.pet, Right click and "Save Link As". X-precise-2.3 will have an updated version included.

The .desktop files are in /usr/share/applications and the menu files are in /etc/xdg/menus
I'm excited to hear that there's going to be a x-precise 2.3

x-precise 2.2 is already so stable and reliable. will definitely look forward to x-precise 2.3!

a worthy upgrade of the one time great saluki 2.3. of course, Carolina is also great successor but as personal preference, I just feel good with precise as a base.

User avatar
Geoffrey
Posts: 2355
Joined: Sun 30 May 2010, 08:42
Location: Queensland

#286 Post by Geoffrey »

Redshift GUI
Description

Redshiftgui changes the color temperature of your monitor to better match that of your surrounding. This means a cooler temperature during daytime (due to natural lighting), and a warmer temperature at night (due to indoor lighting).
Menu entry located in Control Panel > Hardware > Redshift color temperature adjustment

Image

redshiftGUI-0.2.1.pet

libxcb-randr0_1.8.1-1ubuntu0.2_i386.pet
Last edited by Geoffrey on Wed 22 Mar 2017, 09:25, edited 1 time in total.
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]

User avatar
rg66
Posts: 1158
Joined: Mon 23 Jul 2012, 05:53
Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!

#287 Post by rg66 »

X-precise-2.3 is finally finished and available for download. The non-pae will come in a few days.

http://carolina-linux.com/rg66/X-precise/iso

X-precise-2.2.iso___X-precise-2.3.iso.delta md5: c72893516636d4fb6491343c655cb075
X-precise-2.3.iso md5: 296d1f1875096ca31247948ea6c8c872

Change log

Firefox has been moved to /usr/lib. If you've done an update and use a 2.2 savefile you can delete /opt/firefox directory.

Many thanks to Geoffrey for uploading ISO's
Attachments
X-precise-2.3.jpg
(27.77 KiB) Downloaded 1505 times
Last edited by rg66 on Sun 23 Mar 2014, 05:09, edited 1 time in total.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

X-precise-2.3

#288 Post by Billtoo »

Manual frugal install to hard drive.

video-info-glx 1.5.3 Sat 22 Mar 2014 on X-precise 2.3 Linux 3.9.11 i686
2.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
oem: Intel(R)Ironlake Desktop Graphics Chipset Accelerated VGA BIOS
product: Intel(R)Ironlake Desktop Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.11.3
dimensions: 1920x1080 pixels (507x285 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ironlake Desktop x86/MMX/SSE2
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
Core 0: @1200 1: @1200 2: @1200 3: @1200 MHz

Added programs from PPM + pets.
Working well so far.
Attachments
Screenshot.jpg
(40.13 KiB) Downloaded 1558 times

User avatar
Geoffrey
Posts: 2355
Joined: Sun 30 May 2010, 08:42
Location: Queensland

#289 Post by Geoffrey »

Xfce4 Mailwatch Plugin

Mailwatch
About

Xfce4 Mailwatch Plugin is a multi-protocol, multi-mailbox mail watcher for the Xfce4 panel.
Features

IMAP and Secure IMAP support
POP3 and Secure POP3 support
Local Mbox mailbox support
Local Maildir mailbox support
Local MH-Maildir mailbox support
G̶M̶a̶i̶l̶ ̶s̶u̶p̶p̶o̶r̶t̶ --------------------------- I was unable to get Gmail to work.
Fully multithreaded design: no panel lockups
Informative new-message breakdown in tooltip
Ability to run program on new messages or button click
Informative logger to help track down mail connection problems



Image

xfce4-mailwatch-plugin-1.1.0.pet

I was able to get it to check GMail using pop3 with the settings in the image below.

Image
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]

User avatar
rg66
Posts: 1158
Joined: Mon 23 Jul 2012, 05:53
Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!

#290 Post by rg66 »

X-precise-non-pae delta and ISO are available for download.
http://carolina-linux.com/rg66/X-precise/iso

Thanks again to Geoffrey for uploading the ISO
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

X-precise-2.3

#291 Post by Billtoo »

Manual frugal install to hard drive.

video-info-glx 1.5.3 Tue 25 Mar 2014 on X-precise 2.3 Linux 3.2.48 i686
0.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV530 [Radeon X1600]
oem: ATI ATOMBIOS
product: RV530 01.00

X Server: Xorg Driver: radeon
X.Org version: 1.11.3
dimensions: 1920x1080 pixels (507x285 millimeters)
depth of root window: 24 planes

direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: X.Org R300 Project
OpenGL renderer string: Gallium 0.4 on ATI RV530
OpenGL version string: 2.1 Mesa 8.0.4

AMD Athlon(tm) 64 Processor 3300+
Core 0: @2411 MHz

No problems.
Attachments
Screenshot.jpg
(16.58 KiB) Downloaded 1311 times

User avatar
Moat
Posts: 955
Joined: Tue 16 Jul 2013, 06:04
Location: Mid-mitten

#292 Post by Moat »

Anybody else having analog dialup problems? :?:

Trying to dial out via USB modem (Trendnet TFM-561U that works flawlessly on all computers here, with all Pups - including Precise 5.7.1 retro and Carolina) - Pupdial probes, sets up, initializes, dials out and creates an apparently stable connection to my ISP... but then sits there quietly connected, unable to pass a single data packet. Firefox immediately shows "server not found", Sylpheed times out, and the PPM's yellow update dialog window disappears instantly when pressing "enter" to download the update files.

Hovering the mouse over the tray's network icon shows 0.0 tx/rx of data.

Firewall is not enabled, and the created wvdial.conf is identical to one I compared to from my working Precise 5.7.1. I even tried exchanging the pupdial and pupdialog scripts from my working Precice's /usr/bin and /usr/sbin, with no luck.

It's as if the dialup is functioning fine, but the applications themselves are unable to communicate with the modem/network... maybe?

Any help appreciated... otherwise, X-precise 2.3 is blistering fast and gorgeous!! Hope I can get this to work - probably some simple thing that's just over this noob's head...

Bob

User avatar
Marv
Posts: 1264
Joined: Wed 04 May 2005, 13:47
Location: SW Wisconsin

snapmergepuppy?

#293 Post by Marv »

Pristine frugal Grub4Dos install of non-PAE to cf card in Pentium M ipw2200 I855GM laptop. Also updated 2.2 savefile on same laptop. Basically everything working correctly in both installs. One thing not, and I'm sorry, I really don't know if it was in 2.2. Running Pupmode 13 correctly, savefile saved to correctly on shutdown. Using 'Save' from menu, the initial yaf-splash displays, the /tmp/snapmergepuppyrequest file is created, and then it remains in the wait loop in /usr/sbin/save2flash. It seems that the touched file in /tmp isn't being picked up by whatever event manager/daemon that should. Can someone else running pupmode 13 verify? Behavior is identical in the pristine install with a fresh savefile and the update of my 2.2 savefile. Running snapmergepuppy directly from a terminal throws some errors but completes ok.

Edit: Substituted the snapmergepuppy from slacko 5.7 final. That completes when run from terminal with no errors. The errors were wrt handling of /dev/snd files and rewin has fixed that I believe. Hangup when run from 'Save' unchanged as expected. For now, I just rewrote save2flash not to queue but just to do it when called
Attachments
Saveresult.jpg
(38.22 KiB) Downloaded 1388 times
Last edited by Marv on Wed 26 Mar 2014, 00:14, edited 2 times in total.
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.

User avatar
Moat
Posts: 955
Joined: Tue 16 Jul 2013, 06:04
Location: Mid-mitten

#294 Post by Moat »

Just to note that the dialup issue I'm having in Xprecise 2.3 (two posts above) occurs in 2.2, as well. FWIW...

EDIT to add - Hmm... my dialup issue might not be an issue, after all (?). Now that I'm running with a savefile (was running from the live CD only, previously), dialup seems to function normally. So - a savefile may be required for dialup to function? More testing to do...

Bob

User avatar
rg66
Posts: 1158
Joined: Mon 23 Jul 2012, 05:53
Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!

Re: snapmergepuppy?

#295 Post by rg66 »

Marv wrote:Pristine frugal Grub4Dos install of non-PAE to cf card in Pentium M ipw2200 I855GM laptop. Also updated 2.2 savefile on same laptop. Basically everything working correctly in both installs. One thing not, and I'm sorry, I really don't know if it was in 2.2. Running Pupmode 13 correctly, savefile saved to correctly on shutdown. Using 'Save' from menu, the initial yaf-splash displays, the /tmp/snapmergepuppyrequest file is created, and then it remains in the wait loop in /usr/sbin/save2flash. It seems that the touched file in /tmp isn't being picked up by whatever event manager/daemon that should. Can someone else running pupmode 13 verify? Behavior is identical in the pristine install with a fresh savefile and the update of my 2.2 savefile. Running snapmergepuppy directly from a terminal throws some errors but completes ok.

Edit: Substituted the snapmergepuppy from slacko 5.7 final. That completes when run from terminal with no errors. The errors were wrt handling of /dev/snd files and rewin has fixed that I believe. Hangup when run from 'Save' unchanged as expected. For now, I just rewrote save2flash not to queue but just to do it when called
I first thought it was pupsaveconfig causing the issues but after I added /etc/eventmanager from lina (X-precise ends up with a blank one) did a reboot, it saves properly and I can now change save interval. Although, once I could change interval, most of the lines from pupsave.conf disappear. Below is /etc/eventmanager

Could you post the slacko snapmergepuppy?
Attachments
eventmanager.gz
(899 Bytes) Downloaded 395 times
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]

User avatar
rg66
Posts: 1158
Joined: Mon 23 Jul 2012, 05:53
Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!

#296 Post by rg66 »

I've made an update pet to fix the pupmode 13, 77 etc.. save issues. It also changes yaf-splash to notify which is much nicer and removes the Save.desktop if changed to pupmode 6 or 12 (I changed pmedia=atahd to ataflash to get pupmode 13 and test the save issue, then back to atahd for pupmode 12 which doesn't need the save icon)
Attachments
X-precise-2.3.1-update.pet
(18.95 KiB) Downloaded 649 times
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]

User avatar
Marv
Posts: 1264
Joined: Wed 04 May 2005, 13:47
Location: SW Wisconsin

snapmergepuppy?

#297 Post by Marv »

Here is the snapmergepuppy from slacko 5.7 final. I'll strip out my changes and test your update pet as soon as I get the 50 lb non-virtual pup off my lap and walked.

Edit: Dogs walked, non-virtual and virtual. Saving in pupmode 13 now is just fine with the update pet, both from the menu and scheduled. Thanks.
Attachments
snapmergepuppy.gz
From slacko 5.7 final via Lxpup..
(3.8 KiB) Downloaded 404 times
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.

User avatar
rg66
Posts: 1158
Joined: Mon 23 Jul 2012, 05:53
Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!

#298 Post by rg66 »

I've re-written Startmount in gtkdialog and re-named it automount. This pet will remove the existing startmount files and you need to re-enable your drives for automounting. It works in X-slacko and Carolina as well. Thanks to Geoffrey for help as usual.

Edit: Updated to v1.1.1 - changed check for savefile to check pupmode so it'll work in a full install

Right click > Save Link As
http://carolina-linux.com/rg66/X-common ... -1.1.1.pet
Attachments
AutoMount.png
(19.74 KiB) Downloaded 1069 times
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]

User avatar
Geoffrey
Posts: 2355
Joined: Sun 30 May 2010, 08:42
Location: Queensland

#299 Post by Geoffrey »

[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]

Terry H
Posts: 708
Joined: Sun 29 Mar 2009, 16:48
Location: The Heart of Muskoka, ON Canada

#300 Post by Terry H »

I've been using Carolina 1.2 quite a bit over the last couple of months, so I thought I'd give X-Precise 2.3 a try The reason I am posting is there was an odd occurrence when setting up.

I checked the run internet applications as spot. When the next screen was displayed, it had a check box and 'seamonkey'. When Ithe set up was complete, I see that firefox is included, not seamonkey.
.
Just thought I'd let you know. I didn't check whether firefox is set to run as spot. I'm back on carolina at the moment.

Post Reply