Puppy Linux Discussion Forum

mpierrat25 · Joined: 23 Aug 2007 Posts: 110 Location: France (25)

[Resolved] sorry forgot this post I just re read the thread and I got it!!

I'like to test and use this facility but failed , please help.

My config :

wrt54G feeding puppypc via Wifi (wlan0 slacko 5.4)
puppypc connected via ethernet (eth0) to android netbook

as soon as i run shareinternet I lost the Internet on wlan0

Please let me know how to setup interfaces.

regards

Atle · Joined: 19 Nov 2008 Posts: 588 Location: Oslo, Norway

Has anyone tried, have opinion or experience with replacing the Ethernet with a USB cable? I think my crossed ethernet cable is broken and also see that using USB might... thats a might... be just as good? Or?

Agnishom · Joined: 19 Aug 2013 Posts: 24 Location: /dev/null

I am using Lucid Puppy 528. I installed the dotpet but I cannot find an way to start the program.

What to do?

Semme · Joined: 07 Aug 2011 Posts: 6940 Location: World_Hub

Agnishom- is pups firewall enabled? You should have a few scripts in /usr/local/shareInternet..

Read on.. you might not need it.

gyro · Posted: Mon 07 Oct 2013, 11:39 Post subject:

Atle · Joined: 19 Nov 2008 Posts: 588 Location: Oslo, Norway

Gyro...

I might be out of luck here, but is there a way to share internet using USB cables or even a USB hub? Could that possibly work?

How about "one to one" PC connection as twisted Ehternet does?

gyro · Posted: Fri 08 Nov 2013, 06:48 Post subject:

Atle · Joined: 19 Nov 2008 Posts: 588 Location: Oslo, Norway

Hi Gyro...

I used to have a smartphone. And that could share internet by USB or Wlan.

Due to the Wlan using all the battery, I normally used USB and also then charged the phone at the same time.

Puppy Linux has so far just accepted the USB connection as IF it was a normal ethernet coming out of a router.

I could test this my self, but dont have the gear as we speak.

But what i wanted to test was if you use a Puppy that supports ShareInternet and hook it up to a USB hub in order to hook up more Puppy computers, if that would provide internet sharing?

I guess the main issue is a matter of testing, but also if ShareInternet could share internet using USB, as my android did.

Imagine playing LAN games over USB Smile

OR other possibilities that arises.

Justplaying around with the idea as ShareInternet is ranked as one of the very best pets out there. ITs homebrew and uniqe

gyro · Posted: Mon 18 Nov 2013, 11:41 Post subject:

Atle,

shareInternet simply doesn't work at that level. It only works after you have 2 working network interfaces. Usually you can see these using the "ifconfig" command in a console.
So, if you find a way to get Puppy to talk IP over USB, then shareInternet will do what you want. If Puppy can't do it, then shareInternet won't either.

Atle · Joined: 19 Nov 2008 Posts: 588 Location: Oslo, Norway

Thanks Gyro...

I try just for the fun, if i get my hands on the right gear:-)

Ted Dog · Joined: 13 Sep 2005 Posts: 4010 Location: Heart of Texas

I bit the bullit and got a android phone with the carriers 4G lte coverage on my Ranch. Which has always been an AT&T oddity. They have always had way more spot coverage in my zone. I expect that was due to the Motorola manufacturing plant about 20 miles away. I think they must have had a cell tower test equipment spreader nearby because of existing microwave back haul superhighway line of sight between ATT San Antonio and Houston that goes directly chest high across my property. The usb tether idea would be nice as well for me for the same power usage problem other poster pointed out.
My current sprint cell company mifi has the expected lousy coverage my distance and terrain should have.

dwwideman · Joined: 29 Nov 2013 Posts: 1

hello all, this is my first post. thanks to all who have helped on this forum, i hope that someday i will have enough experience to do the same.

my configuration......

internet(wifi router) >>>>>> usb wifi adapter >>puppy box>>ethernet card >>>>> wifi router(Netgear) >>>>>>(android phones, tablets, etc...)

i am trying to use the netgear wifi router for my home, to connect adroid phoned, tablets, etc... the internet gateway and other wifi router is at my dads house. i use the usb wifi adapter on my puppy box to connect to it. i want to pipe the connection through the ethernet card to the netgear router here at my house.

i can connect to wifi internet with puppy box, i can connect to netgear router with android phones.shareinternet2.2.4 is showing green circle, but i cant get through

wifi router/gateway.....192.168.1.1 dhcp server192.168.1.100>>199
usb adapter...............192.168.1.102
ethernet card.............192.168.0.6(static)
netgear router............192.168.0.1 dhcp server192.168.0.2>>254

gyro · Posted: Sun 08 Dec 2013, 10:21 Post subject:

dwwideman,

I suggest you try using your Netgear router as just a wifi access point, not a router. The puppy box is the router.
Do this by connecting the ethernet cable to a lan port on the Netgear router, not the wan port.
Also disable the dhcp server on the Netgear. Again this service is provided by the puppy box.

You can easily test Internet access by using one of the other lan ports on the Netgear.

Devices connected to the Netgear, should see the IP address of the puppy ethernet card, as their gateway address.

OR
You could try just setting the IP address of the puppy ethernet card to 192.168.2.1

gyro

Ted Dog · Joined: 13 Sep 2005 Posts: 4010 Location: Heart of Texas

I have a tplink wr702n. and wanted it to run a AP wireless network as a local network, but it needs a ethernet cable hook into a router to work. Would this be what I need. No actual internet is hooked up.

gyro · Posted: Mon 09 Dec 2013, 09:36 Post subject:

Ted Dog,

The wifi routers I have used, will quite happily act as a local wireless network hub, when configured as a router, but with nothing connected to the WAN port.

gyro