Lighthouse 64 602 Beta2 with GIMP-2.8.4 (6-29-2013)

For talk and support relating specifically to Puppy derivatives
Message
Author
gcmartin

#281 Post by gcmartin »

@eDoc, here another location where you can set/change systemwide hostname. You'll recognize it as soon as you see it: Menu>Setup>Setup LIghthouse>Personalized Settings

Your router and other LAN PCs (esp. Windows/Macs) ID your LIghthouse PC(s), usually, by its hostname. You are NOT required to keep the initially setup hostname. In fact, as a good practice, you may want to choose a name that makes it easy to ID the particular PC you are using. For example "Moms", "Dads", "LivingRoom", "TV", "Radio", "Streaming", just to give some examples of the kinds of names used. Your LIghthouse system takes the responsibility to register itself in the LAN so other can register and find it.

Hope this helps in understanding

User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

#282 Post by Q5sys »

gcmartin wrote:@eDoc, here another location where you can set/change systemwide hostname. You'll recognize it as soon as you see it: Menu>Setup>Setup LIghthouse>Personalized Settings
You can also do it at the command line by typing:

Code: Select all

hostname TYPE-NAME-HERE

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#283 Post by edoc »

Thanks ... but in both cases such a change would only create a passive naming ... I was hoping for something more active.

The "Mariner31702" line is presumably read from a text file somewhere.

The "Linux 3.8.7" doesn't show up in the Menu-Setup-LighthouseSetup pop-up but presumably is read from a text file somewhere.

If "Mariner31702" is assigned to both the base and expanded-SFS version of LH64 it doesn't answer the ID question well.

Does "Linux 3.8.7" come from a "sysinfo" text file - as a true and current assessment - or from a static text file somewhere that may or may not be current?

I guess what I'm getting at is if one might specify an actively-updated source from which those two lines on top of the gkrellm vertically stacked windows draw their input?

It's a small thing - hardly worth much time or effort on anyone's part.

BTW: Why does gkrellm default to the bottom left when it's always in the way there? I moved it to the right - relocated the Lock & Trash icons to the upper left - then added more link windows to gkrellm (and enlarged them).
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

#284 Post by Q5sys »

edoc wrote:Thanks ... but in both cases such a change would only create a passive naming ... I was hoping for something more active.

The "Mariner31702" line is presumably read from a text file somewhere.

The "Linux 3.8.7" doesn't show up in the Menu-Setup-LighthouseSetup pop-up but presumably is read from a text file somewhere.

If "Mariner31702" is assigned to both the base and expanded-SFS version of LH64 it doesn't answer the ID question well.

Does "Linux 3.8.7" come from a "sysinfo" text file - as a true and current assessment - or from a static text file somewhere that may or may not be current?

I guess what I'm getting at is if one might specify an actively-updated source from which those two lines on top of the gkrellm vertically stacked windows draw their input?

It's a small thing - hardly worth much time or effort on anyone's part.

BTW: Why does gkrellm default to the bottom left when it's always in the way there? I moved it to the right - relocated the Lock & Trash icons to the upper left - then added more link windows to gkrellm (and enlarged them).
I've never looked at the source of GkrellM, but I don't think its reading from a text file. I believe its just resolving that from the system the same way that sysinfo does, by using the built in linux tools. Ie. Like running 'cat /proc/version' from the command line for the kernel info. That's what the Linux 3.8.7 line is, it's the kernel version. Which is not something that gets updated except for major version changes. (LHP515 vs LHP601) The hostname is 'read/resolved' when GkrellM starts, and not again after. Its not something the program is checking for changes, manly because one usually does not go around changing their hostname regularly.

As for changing the hostname permanently, just google for changing the hostname permanently on slackware 14. If there's a special way I don't remember it off the top of my head.

You can turn both of those lines in grkellm off. You can also have it remember its position at shutdown. You need to take some time looking around in the configuration menu. Positioning and behavior is all in there.

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

#285 Post by Billtoo »

Q5sys wrote:taking screencaps in VLC doesnt seem to be working anymore for me. It tries to write the file but it's unreadable by any image viewer/editor.
Anyone else have this problem?

It worked in 601 just fine.
It works in version 2.0.8, I compiled that today but I didn't make pets etc.
Attachments
vlcsnap.jpg
(39.96 KiB) Downloaded 352 times

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Lighthouse 64 602 Beta2 with GIMP-2.8.4

#286 Post by Billtoo »

Lighthouseb2 running from a 32gb SDHC card, computer is a lenovo
ThinkCentre.
video-info-glx 1.5.3 Fri 30 Aug 2013 on Lighthouse64 602 Linux 3.8.7 x86_64
2.0 VGA compatible controller:
Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
oem: Intel(r)Eaglelake Graphics Chip Accelerated VGA BIOS
product: Intel(r)Eaglelake Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.12.3
dimensions: 1920x1080 pixels (508x285 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) G41
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
Core 0: @2003 1: @2003 MHz
Memory 4015MB (371MB used)
Linksys WUSB54GC v1 802.11g Adapter [Ralink RT73]

I did this install on a different pc but all it needed was to set up
the wireless when I moved it to this pc.
It's working great.

EDIT:I downloaded and installed the kde sfs and the other necessary sfs, it seems to be working fine, I don't have to suffer from kshisen withdrawal any longer :)
Attachments
screenshot.jpg
(46.15 KiB) Downloaded 1427 times

Senza Vega
Posts: 46
Joined: Tue 13 Aug 2013, 10:16

xcompmgr and cairo-dock

#287 Post by Senza Vega »

Hello,

sorry for this "very newbie question" :

I tried without success to start with xcompmgr and cairo-dock -o
I did a symlink into /Startup :
don't work,
into /root/Startup :
don't work

tried to write :
xcompmgr -c -C &
into /root/.xinitrc

no success

tried to edit /etc/X11/xorg.conf :
Section "Extensions"
# This enables kcompmgr or xcompmgr (if present)
Option "Composite" "Enable"
EndSection

no success too

Somebody could help me please ?
Best regards.

Edit : when I launch xcompmgr and cairo-dock in a console, works fine.

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

USB Boot Stick

#288 Post by edoc »

I'm trying to create a second USB boot stick using the Menu -> Setup -> Bootflash Install Lighthouse to USB.

The USB stick doesn't work & I think it has something to do with the UEFI mess but I don't recall how I got the first one to work.

Can I just create the same sub-menus on the new one and copy everything missing across from the working one?

Or is it more complicated than that?

The two images on the left are the working USB boot stick, the one on the upper right is the non-working USB boot stick:

http://nevils-station.com/images/misc1/ ... ug2013.png
Last edited by edoc on Sat 31 Aug 2013, 22:33, edited 1 time in total.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
tazoc
Posts: 1157
Joined: Mon 11 Dec 2006, 08:07
Location: Lower Columbia Basin WA US
Contact:

auto connect; checking fat partition; UEFI flashdrive

#289 Post by tazoc »

ICPUG wrote:I have a query relating to usage of Lighthouse Puppy. I am actually using the 32-bit version but I suspect the same thing would apply to the 64 bit version and this seems to be the thread that is read!

When I boot Lighthouse on my machine with an ethernet cable attached to an always on modem router it automatically connects to the Internet. I can, of course, disconnect by right clicking the network icon in the tray and selecting disconnect.

Is there a way of starting up in the disconnect state, preferably without connecting first and then automatically disconnecting? Ideally, I would like the network icon to be there so that I can right click and connect when I DO want to go on the internet.

Thanks.
Hello ICPUG,
I did not include the ability to boot without attempting automatic Internet connection. I will study this for the next release and hopefully include a setting that would apply upon reboot--no auto connect. I am focusing on 64-bit Lighthouse, however if you let me know which version of 32-bit Lighthouse Pup you need, I might be able to make a Pet for that purpose, after studying the scripts and tray icon source code.
gcmartin wrote:New issue has arisen on my trusty X2 box. A HDD issue has come up and is shown below.

Below, as you look over the pics enclosed, on my system drive,
  1. the 1st physical partition is now labeled sda (this is OK and understood)
  2. And, after mount and opening GParted, I see a flag on the 1st partition.
  3. Looking at the information of the flag, I am supposed to have a correction option.
  4. Going back to GParted's Menu options, I see tht the correction option does NOT exist for the partition.
  5. Lastly, when I open LH64's Drive mounter, notice that the mounted partition, sda3, does NOT show up.
Question
What data can be provided to assist understanding and identifying why this has occurred?
My concerns are why the error may exist, why GParted doesn't have the "Check" option available for the partition and why the Drive Utility cannot "see" the partition.

DATA does seem to be intact, at this point.
Thanks for any assistance anyone can offer.
The GParted "Check" option is greyed out because the partition is mounted. Choose the 'Unmount' option in GParted, then Check should work. If the partition is not showing up in Drives Manager, try Fatdog Drive Mounter and Pmount in the Filesystem menu. If GParted cannot repair the file system, copy the data over to another good partition, in case it is necessary to reformat sda3 and restore from the backup. I don't know what would cause the unallocated space on the fat32 partition.
edoc wrote:I'm trying to create a second USB boot stick using the Menu -> Setup -> Bootflash Install Lighthouse to USB.

The USB stick doesn't work & I think it has something to do with the UEFI mess but I don't recall how I got the first one to work.

Can I just create the same sub-menus on the new one and copy everything missing across from the working one?
I don't think so.
Or is it more complicated than that?
Yes, I plan to update the Bootflash script to detect and point UEFI machines to the 'dd and fix-usb.sh' method from Fatdog64, described in the FAQ at http://www.lhpup.org/help/faqs/uefi-flashdrive.html
If fix-usb.sh fails and you have previously followed the 'dd' instructions precisely, you might need to erase the flash drive with the following command, prior to the 'dd and fix-usb.sh':

Code: Select all

dd if=/dev/zero of=/dev/sdd bs=4k conv=notrunc
where /dev/sdd is your flash drive without a partitiion# (e.g., sdd not sdd3).
NOTE: Do not use the dd command above, unless you are absolutely certain of the drive designation. (Using a dd command on /dev/sda might irrecoverably erase your hard disk!)

Re: Mariner vs. base. There currently is no indicator of a Mariner installation, apart from the presence of the extra SFS. You can determine which you have by copying over the script click-to-verify-mariner from the ISO into the same directory where your L64save file is located and click on the script. If the initrd.xz verifies OK, then it is Mariner, otherwise it is base, (or possibly changed if you had extracted and edited the initrd.) The only difference between the two ISOs is the presence of the extra SFS, and the contents of /etc/rc.d/BOOTCONFIG file inside the initrd, used to en-queue the SFS included with Mariner.
[url=http://www.lhpup.org/][b][size=100]lhpup.org[/size][/b] [img]http://www.lhpup.org/gallery/images/favicon.png[/img][/url] [url=http://www.lhpup.org/release-lhp.htm#602]Lighthouse 64 6.02[/url]

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Lighthouse 64 602 Beta2 with GIMP-2.8.4

#290 Post by Billtoo »

Continued from previous post:
I moved my SDHC install from the ThinkCentre to an Acer Desktop pc.

video-info-glx 1.5.3 Sat 31 Aug 2013 on Lighthouse64 602 Linux 3.8.7 x86_64
2.0 VGA compatible controller:
Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
oem: Intel(R)Ironlake Desktop Graphics Chipset Accelerated VGA BIOS
product: Intel(R)Ironlake Desktop Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.12.3
dimensions: 1920x1080 pixels (508x285 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ironlake Desktop
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
Core 0: @1200 1: @1200 2: @1200 3: @1200 MHz

RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Memory 5976MB (877MB used)

I had to adjust the clock which was + 4 hours but that's it.
Attachments
screenshot2.jpg
(48.43 KiB) Downloaded 1319 times

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Lighthouse 64 602 Beta2 with GIMP-2.8.4

#291 Post by Billtoo »

I moved my SDHC card again:
video-info-glx 1.5.3 Sun 1 Sep 2013 on Lighthouse64 602 Linux 3.8.7 x86_64
2.0 VGA compatible controller:
Intel Corporation Ivy Bridge Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product:
Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.12.3
dimensions: 3840x1080 pixels (508x285 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Desktop
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 MHz
Network controller: Ralink corp. Device 5390
Memory 8065MB (693MB used)

I used zarfy to setup for 2 monitors.
I think the SDHC card will be staying here :)
Lighthouse has at least 3 versions of Intel grahics supported.
Attachments
screenshot3.jpg
(26.35 KiB) Downloaded 1200 times

Senza Vega
Posts: 46
Joined: Tue 13 Aug 2013, 10:16

video

#292 Post by Senza Vega »

Hello,
Is it interesting to post a link to a small video of lighthouse 64 with KDE netbook desktop?
if so, do you know a place to do it?
thank you

Edit :

The best disributions without a good community will always be a middling distribution..

gcmartin

Re: video

#293 Post by gcmartin »

Senza Vega wrote:Hello,
Is it interesting to post a link to a small video of lighthouse 64 with KDE netbook desktop?
if so, do you know a place to do it?
thank you

Edit :

The best disributions without a good community will always be a middling distribution..
If you have a link, you could post it here in this thread.

Others would benefit and we could begin to spread the word.

Senza Vega
Posts: 46
Joined: Tue 13 Aug 2013, 10:16

video KDE

#294 Post by Senza Vega »

Linux KDE netbook on Asus F201E, Processor 4x Intel(R) Core(TM) i3-2365M CPU @ 1.40GHz, Memory : 4 Gb, Resolution : 1366x768 pixels

http://youtu.be/pjrXjgTwvmw

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Lighthouse 64 602 Beta2 with GIMP-2.8.4

#295 Post by Billtoo »

I tried out BootFlash install Lighthouse to USB and it worked
well, this is running from a 16gb flash drive on my hp desktop.

EDIT:I did another BootFlash install :)
Attachments
screenshot2.jpg
(52.21 KiB) Downloaded 998 times
screenshot.jpg
(28.13 KiB) Downloaded 993 times

User avatar
meeki
Posts: 122
Joined: Mon 23 Jul 2012, 04:48
Location: Portland OR

dir2sfs dir2pet ( RIGHT CLICK)

#296 Post by meeki »

Hey everyone, I'm back in the real world again. Back on track with collage looking to getting in the masters program. Sorry Ive been gone so long. School, wife, job ....oh and the Hit and Run by a underage, uninsured, unlicensed driver, and no registration too boot.

all is well again.


Tazoc, Nice distro. I'm back to using LHpup after months of nightmares with Linux mint.

Well on to the topic at hand.

Right click dir2pet & dir2sfs for LH64

Are you tired of typing in terminal?
Just want to right click a dir that's ready to be made into a SFS or PET?
Get an option to auto generate a md5.
If so then this is the program for you.

Note: no spaces in dir name!

Just right click the DIR
Select SFS or PET

Image

It will tell you the size and give you a chance to change your mind.

Image

You will then get a terminal. Just sit back and let it do its thing.

Image

You will then be given a choice to make a md5sum

Image

I did this after loosing my mind and time in the command prompt making tons of depends for the LH64 LAMP stack.

Right Click dir2sfs
SFS - https://dl.dropboxusercontent.com/u/129 ... _602-1.sfs
MD5 - https://dl.dropboxusercontent.com/u/129 ... -1.sfs.md5
PET - https://dl.dropboxusercontent.com/u/129 ... _602-1.pet
MD5 - https://dl.dropboxusercontent.com/u/129 ... -1.pet.md5

Right Click dir2pet
SFS - https://dl.dropboxusercontent.com/u/129 ... _602-1.sfs
MD5 - https://dl.dropboxusercontent.com/u/129 ... -1.sfs.md5
PET - https://dl.dropboxusercontent.com/u/129 ... _602-1.pet
MD5 - https://dl.dropboxusercontent.com/u/129 ... -1.pet.md5

Glad to be back.

Update: changed two letters in a Variable in dir2pet. fixes a file issue. Did not update the ver number as it was only 2 letters changed in one script!
Last edited by meeki on Sun 08 Sep 2013, 00:53, edited 3 times in total.

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Lighthouse 64 602 Beta2 with GIMP-2.8.4

#297 Post by Billtoo »

BootFlash install to an 8gb flash drive, pc is an emachines D620
laptop pc.
video-info-glx 1.5.3 Sat 7 Sep 2013 on Lighthouse64 602 Linux 3.8.7 x86_64
5.0 VGA compatible controller:ATI Technologies Inc RS690M [RadeonX1200Series]
oem: ATI ATOMBIOS
product: RS690 01.00
X Server: Xorg Driver: radeon
X.Org version: 1.12.3
dimensions: 1280x800 pixels (338x211 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: X.Org R300 Project
OpenGL renderer string: Gallium 0.4 on ATI RS690
OpenGL version string: 2.1 Mesa 8.0.4

AMD Athlon(tm) Processor 2650e
Core 0: @1600 MHz
Memory 1793MB (400MB used)
Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
It's working well.
Attachments
screenshot.jpg
(67.36 KiB) Downloaded 901 times

User avatar
meeki
Posts: 122
Joined: Mon 23 Jul 2012, 04:48
Location: Portland OR

synergy

#298 Post by meeki »

Image
Synergy

"Share your mouse and keyboard between multiple computers on your desk"
http://synergy-foss.org/

Its works like a KVN Switch but via your network, not cables.

Synergy 1.4.12
SFS - https://dl.dropboxusercontent.com/u/129 ... _602-1.sfs
MD5 - https://dl.dropboxusercontent.com/u/129 ... -1.sfs.md5

User avatar
meeki
Posts: 122
Joined: Mon 23 Jul 2012, 04:48
Location: Portland OR

#299 Post by meeki »

Oh and I got LAMP (Linux, Apache, MySql, PHP) installed and working in LH64.

as of right now its running in spot! all of it. So even if your server gets hacked your system will not.

Just got webmin working too! http://www.webmin.com/
you can control it all from a web based GUI !

Working on getting libcap installed. This way ill be able to get any port even those ports 1-->1024 to work out of spot.
CAP_NET_BIND_SERVICE

Code: Select all

setcap 'cap_net_bind_service=+ep' /path/to/program
"which is explicitly defined as the capacity for an executable to bind to a port less than 1024" http://wiki.apache.org/httpd/NonRootPortBinding

after that sort out some startup/install scrips and will have a LAMP Stack for LH64 in SFS. Load login set some passwords and have a full server.

Its kinda big. Sits at 1+ GB. 900megs of that is MySQL. I wanted the whole thing uncut so I and users can run any appliance we want with out missing depends.

SOON tm.

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#300 Post by edoc »

meeki - That is some amazing stuff!

Sure appreciate you sharing it ... now I just have to figure out how to make good use of it.

First, I need to make a current backup ... I know, it should be a routine, but life keeps happening.

David
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

Post Reply