Upup Raring 3.9.8.1 with kernel 3.9.8 non-PAE
Upup Raring 3.9.8.1 with kernel 3.9.8 non-PAE
I used the universal installer to install 3981 to a 4gb flash drive
and used grub4dos as the bootloader.
Computer
Processor 2x Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory 1553MB (179MB used)
Machine Type Physical machine
Operating System Upup Raring - 3.9.8.1
User Name root (root)
Date/Time Sun Jul 7 21:49:13 2013
Display
Resolution 1920x1080 pixels
OpenGL Renderer Mesa DRI R200 (RV280 5961) x86/MMX/SSE2 TCL DRI2
X11 Vendor The X.Org Foundation
Audio Devices
Audio Adapter CMI8738-MC6 - C-Media CMI8738
Input Devices
Logitech USB Receiver
Logitech USB Receiver
Power Button
Power Button
PC Speaker
OpenGL
Vendor Tungsten Graphics, Inc.
Renderer Mesa DRI R200 (RV280 5961) x86/MMX/SSE2 TCL DRI2
Version 1.3 Mesa 9.1.3
Direct Rendering Yes
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
303 frames in 5.0 seconds = 60.456 FPS
300 frames in 5.0 seconds = 59.998 FPS
301 frames in 5.0 seconds = 60.004 FPS
#
I added VLC,Audacious,Kdegames,Ltris, and Kfloppy with ppm.
@pemasu
Thanks for doing your summer experiment, it's a great success
and used grub4dos as the bootloader.
Computer
Processor 2x Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory 1553MB (179MB used)
Machine Type Physical machine
Operating System Upup Raring - 3.9.8.1
User Name root (root)
Date/Time Sun Jul 7 21:49:13 2013
Display
Resolution 1920x1080 pixels
OpenGL Renderer Mesa DRI R200 (RV280 5961) x86/MMX/SSE2 TCL DRI2
X11 Vendor The X.Org Foundation
Audio Devices
Audio Adapter CMI8738-MC6 - C-Media CMI8738
Input Devices
Logitech USB Receiver
Logitech USB Receiver
Power Button
Power Button
PC Speaker
OpenGL
Vendor Tungsten Graphics, Inc.
Renderer Mesa DRI R200 (RV280 5961) x86/MMX/SSE2 TCL DRI2
Version 1.3 Mesa 9.1.3
Direct Rendering Yes
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
303 frames in 5.0 seconds = 60.456 FPS
300 frames in 5.0 seconds = 59.998 FPS
301 frames in 5.0 seconds = 60.004 FPS
#
I added VLC,Audacious,Kdegames,Ltris, and Kfloppy with ppm.
@pemasu
Thanks for doing your summer experiment, it's a great success
- Attachments
-
- screenshot.jpg
- (64.05 KiB) Downloaded 725 times
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi Pemasu,
this raring looks great!
As gCAD3D seems being my favourite applications ...
even version 2.10 needs texturation present.
Till now only wheezy-3.5.2.5 has «texturation» "enabled" or "present " with the embedded Mesa.
Opening the file Haus1.gcad is a good test for testing texturation display.
(on gcad3d-2.10, the default loaded drawing has no texturation; it is only a so called "wired" model).
Running gcad3d from console returns
gl_error 1281
gl_error 1282
when opening Haus1.gcad using Raring.
Sorry if not able to explain this with more specific terms relevant to Mesa settings.
So i keep wondering why this Raring could not render texturation as wheezy does...
Sorry is looking insisting ..
Cheers
Charlie
this raring looks great!
As gCAD3D seems being my favourite applications ...
even version 2.10 needs texturation present.
Till now only wheezy-3.5.2.5 has «texturation» "enabled" or "present " with the embedded Mesa.
Opening the file Haus1.gcad is a good test for testing texturation display.
(on gcad3d-2.10, the default loaded drawing has no texturation; it is only a so called "wired" model).
Running gcad3d from console returns
gl_error 1281
gl_error 1282
when opening Haus1.gcad using Raring.
Sorry if not able to explain this with more specific terms relevant to Mesa settings.
So i keep wondering why this Raring could not render texturation as wheezy does...
Sorry is looking insisting ..
Cheers
Charlie
- Attachments
-
- Haus1.gcad.whezzy3525-part.jpg
- (32.47 KiB) Downloaded 699 times
-
- Haus1.gacd_Raring-part.jpg
- (54.31 KiB) Downloaded 716 times
Radky. Woof packages template for fpm2 is wrong. 0.79 version has different location for icons and when not found, it seqfaults.
Here is the fixing pet. Be aware, that removal of /root/.fpm folder is needed it to be effective. The pinstall.sh script in fix-pet takes care of that folder. Since fpm2 seqfaults without fix, it should not be problem.
I have fixed the woof package template.
Thanks Radky of your observant post.
Here is the fixing pet. Be aware, that removal of /root/.fpm folder is needed it to be effective. The pinstall.sh script in fix-pet takes care of that folder. Since fpm2 seqfaults without fix, it should not be problem.
I have fixed the woof package template.
Thanks Radky of your observant post.
- Attachments
-
- fpm2-fix-0.0.1.pet
- (9.68 KiB) Downloaded 293 times
Re: nvidia legacy driver support
Hi theredogbert0360 wrote:Tried out the latest Upup and am very impressed. I was wondering if there will be nvidia driver support for legacy cards (304.xx). I hope so as this will soldify my decession to install it on my computer.
Keep up the great work!
It is possible to "grow your own" nvidia driver using shinobar's get-nvidia pet after downloading the appropriate 304.88 nvidia "run" file + kernel sources + devx sfs.
However as I've already done this I have uploaded the driver (SFS only) here - 28MB
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
-
- Posts: 27
- Joined: Sun 30 Sep 2012, 03:18
( peebee ) " Hi there
It is possible to "grow your own" nvidia driver using shinobar's get-nvidia pet after downloading the appropriate 304.88 nvidia "run" file + kernel sources + devx sfs.
However as I've already done this I have uploaded the driver (SFS only) here - 28MB "
Cheers
peebee
Thank you very much and much appreciated!!!! Double cheers too!!
It is possible to "grow your own" nvidia driver using shinobar's get-nvidia pet after downloading the appropriate 304.88 nvidia "run" file + kernel sources + devx sfs.
However as I've already done this I have uploaded the driver (SFS only) here - 28MB "
Cheers
peebee
Thank you very much and much appreciated!!!! Double cheers too!!
hi for_wov,for_wov wrote: devx & kernel src cannot be reached from Quickpet yet. Any chances Qmmp will get to audio tab?
All the rest is cool as always. Thanks.
qmmp now added to quickpet (use the update button).... i'll sort out the devx & kernel sources button eventually when i add the drivers... there are two different rarings, so it's more complicated that it sounds
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
hi pemasu,
there may be a problem with jwm... , when i move a window to the edge of the screen it stops for ages before going to the next virtual desktop.
after a hunt i found this
however, what ever number i set, i can't get the usual smooth transition i have in other pups
there may be a problem with jwm... , when i move a window to the edge of the screen it stops for ages before going to the next virtual desktop.
after a hunt i found this
so messed around with the settings, editing /root/.jwm/jwm-personal and adding the delay switchThe optional delay attribute sets the delay in milliseconds before moving a window to a different desktop. Setting this to 0 disables dragging between desktops. 1000 is the default.
Code: Select all
<MoveMode delay="50">outline</MoveMode>
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
-
- Posts: 27
- Joined: Sun 30 Sep 2012, 03:18
PPM stopped working...
Just installed Upup 3.9.8.1 and was able to update PPM. When I attempted to do a restart it would not come back up. All I got was a brief window about updating list. I kept waiting and trying but nothing happened.
What can I do to get my PPM back working?
What can I do to get my PPM back working?
666philb
# jwm --version
unrecognized option: --version
JWM vgit-827 by Joe Wingbermuehle
compiled options: confirm fribidi icons jpeg nls png shape svg xft xinerama xpm xrender
There isnt yet new stable version. I do use the development version of the time. I dont know if joe wing is already aware of your observed problem. The right place would be to email joe wing.
dogbert0360. I just updated PPM, I didnt update puppy databases, just ubuntu ones. I updated ok and PPM restarted as it should.
You should check /root/.packages. If there are in the middle of the processing files like /root/.packages/Packages-ubuntu-raring-mainpre, it indicates that processing of the database files havent succeeded. How to fix broken PPM, well, it would need information what is broken.
# jwm --version
unrecognized option: --version
JWM vgit-827 by Joe Wingbermuehle
compiled options: confirm fribidi icons jpeg nls png shape svg xft xinerama xpm xrender
There isnt yet new stable version. I do use the development version of the time. I dont know if joe wing is already aware of your observed problem. The right place would be to email joe wing.
dogbert0360. I just updated PPM, I didnt update puppy databases, just ubuntu ones. I updated ok and PPM restarted as it should.
You should check /root/.packages. If there are in the middle of the processing files like /root/.packages/Packages-ubuntu-raring-mainpre, it indicates that processing of the database files havent succeeded. How to fix broken PPM, well, it would need information what is broken.
Last edited by pemasu on Tue 09 Jul 2013, 13:11, edited 1 time in total.
-
- Posts: 27
- Joined: Sun 30 Sep 2012, 03:18
I checked the root/.packages and found no "Packages-ubuntu-raring-mainpre". Is that what may have caused my PPM to not restart? Sorry if I misunderstood what you meant. Could you please clarify this and what I can do to get my PPM back working.pemasu wrote:
dogbert0360. I just updated PPM, I didnt update puppy databases, just ubuntu ones. I updated ok and PPM restarted as it should.
You should check /root/.packages. If there are in the middle of the processing files like /root/.packages/Packages-ubuntu-raring-mainpre, it indicates that processing of the database files havent succeeded. How to fix broken PPM, well, it would need information what is broken.
So far I like Upup-raring and would like to see Pup-Control become more like Mandriva control center. Keep up the great work pemasu!!!
Not working on Fujitsu T902
Ensemble Wheezy and Raring are forbidden on my laptop.
WHen I try to boot either Wheezy or Raring, GUI appears and, after a few second, or after reboot, PC screen freezes and PC locks, not responding at CTRL-ALT-BACKSPACE.
It depens (IMHO) perhaps from X11, not kernel (I tried a transplant from Precise 3.8.3.1. with Kernel 3.9.8.1 and the new system works very well).
Fujitsu T902 mounts a Intel HD4000 VGA interface.
If you tell me how can I do, i submit the file with hardware specs.
I can't try this new puplets ...
WHen I try to boot either Wheezy or Raring, GUI appears and, after a few second, or after reboot, PC screen freezes and PC locks, not responding at CTRL-ALT-BACKSPACE.
It depens (IMHO) perhaps from X11, not kernel (I tried a transplant from Precise 3.8.3.1. with Kernel 3.9.8.1 and the new system works very well).
Fujitsu T902 mounts a Intel HD4000 VGA interface.
If you tell me how can I do, i submit the file with hardware specs.
I can't try this new puplets ...
-
- Posts: 27
- Joined: Sun 30 Sep 2012, 03:18
I restarted x and still same problem. Tried launching in terminal to see if I can see what the error is but no luck in finding the command to execute this. Is there a command to run PPM from the terminal?pemasu wrote:That pre suffix is sure sign that PPM udpate has failed. If there is none of those, the processing of databases has not failed. I dont know what went wrong. I suppose you have restarted X for testing that something in /tmp is not interfering. Restarting X flushes /tmp content.
-
- Posts: 27
- Joined: Sun 30 Sep 2012, 03:18
pemasu wrote:ppm
Here is the readout from lxterminal:
sh-4.1# ppm
PING www.google.com (74.125.131.147): 56 data bytes
64 bytes from 74.125.131.147: seq=0 ttl=44 time=32.312 ms
--- www.google.com ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 32.312/32.312/32.312 ms
/root/.packages/PKGS_MANAGEMENT: line 117: unexpected EOF while looking for matching `''
/root/.packages/PKGS_MANAGEMENT: line 118: syntax error: unexpected end of file
PING ibiblio.org (152.19.134.40): 56 data bytes
64 bytes from 152.19.134.40: seq=0 ttl=49 time=87.328 ms
--- ibiblio.org ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 87.328/87.328/87.328 ms
/root/.packages/PKGS_MANAGEMENT: line 117: unexpected EOF while looking for matching `''
/root/.packages/PKGS_MANAGEMENT: line 118: syntax error: unexpected end of file
/root/.packages/PKGS_MANAGEMENT: line 118: warning: syntax errors in . or eval will cause future versions of the shell to abort as Posix requires
** (gtkdialog4:2085): ERROR **: gtkdialog: Error in line 29, near token '</vbox>': syntax error
Can you translate this for me and what I can do to fix this so PPM can work?
Ooop. It looks like there is 2 rows in file doing the same thing.
/root/.packages/PKGS_MANAGEMENT
At the end of the file there should be only one like this:
PKG_REPOS_ENABLED=' Packages-ubuntu-raring-main Packages-ubuntu-raring-multiverse Packages-ubuntu-raring-universe Packages-puppy-noarch-official '
Remove both lines and copy my above one and left one row blank after that one.
Restart ppm
If that does not help. Try Classic user interface.
In file /var/local/petget/ui_choice change the text from Ziggy to Classic, save and restart PPM.
/root/.packages/PKGS_MANAGEMENT
At the end of the file there should be only one like this:
PKG_REPOS_ENABLED=' Packages-ubuntu-raring-main Packages-ubuntu-raring-multiverse Packages-ubuntu-raring-universe Packages-puppy-noarch-official '
Remove both lines and copy my above one and left one row blank after that one.
Restart ppm
If that does not help. Try Classic user interface.
In file /var/local/petget/ui_choice change the text from Ziggy to Classic, save and restart PPM.
-
- Posts: 27
- Joined: Sun 30 Sep 2012, 03:18
Sounds like a plan, pemasu. So where in my directory files would I find the petgetpemasu wrote:Ooop. It looks like there is 2 rows in file doing the same thing.
/root/.packages/PKGS_MANAGEMENT
At the end of the file there should be only one like this:
PKG_REPOS_ENABLED=' Packages-ubuntu-raring-main Packages-ubuntu-raring-multiverse Packages-ubuntu-raring-universe Packages-puppy-noarch-official '
Remove both lines and copy my above one and left one row blank after that one.
Restart ppm
If that does not help. Try Classic user interface.
In file /var/local/petget/ui_choice change the text from Ziggy to Classic, save and restart PPM.
package repo text file?
NEVER MIND....I figured it out and did what you said and now its working again. Sheesh!!!...Thank you again for all of your help pemasu. Your the best !!!
Another manual frugal install...... all working well.
report-video
VIDEO REPORT: Upup Raring, version 3.9.8.1
Chip description:
VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe dri2 extmod fbdevhw glx kbd mouse
Actual rendering on monitor:
Resolution: 1024x768 pixels (270x203 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
380 frames in 5.0 seconds = 75.957 FPS
377 frames in 5.0 seconds = 75.345 FPS
377 frames in 5.0 seconds = 75.342 FPS
377 frames in 5.0 seconds = 75.345 FPS
378 frames in 5.0 seconds = 75.541 FPS
377 frames in 5.0 seconds = 75.343 FPS
-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 2592MB (209MB used)
Machine Type : Physical machine
Operating System : Upup Raring - 3.9.8.1
User Name : root (root)
Date/Time : Mon 08 Jul 2013 10:29:26 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH4 - Intel ICH5
report-video
VIDEO REPORT: Upup Raring, version 3.9.8.1
Chip description:
VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe dri2 extmod fbdevhw glx kbd mouse
Actual rendering on monitor:
Resolution: 1024x768 pixels (270x203 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
380 frames in 5.0 seconds = 75.957 FPS
377 frames in 5.0 seconds = 75.345 FPS
377 frames in 5.0 seconds = 75.342 FPS
377 frames in 5.0 seconds = 75.345 FPS
378 frames in 5.0 seconds = 75.541 FPS
377 frames in 5.0 seconds = 75.343 FPS
-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 2592MB (209MB used)
Machine Type : Physical machine
Operating System : Upup Raring - 3.9.8.1
User Name : root (root)
Date/Time : Mon 08 Jul 2013 10:29:26 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH4 - Intel ICH5
Code: Select all
# free
total used free shared buffers
Mem: 2592380 584740 2007640 0 58312
-/+ buffers: 526428 2065952
Swap: 4198396 0 4198396
#
Testing apps for children
Hi,
Tried to install Gcompris and Childsplay from ubuntu packages via ppm.
Gcompris: OK
Childsplay: Doesn´t work. Simlinks missing?
Thanks,
José Pinto
Tried to install Gcompris and Childsplay from ubuntu packages via ppm.
Gcompris: OK
Childsplay: Doesn´t work. Simlinks missing?
Thanks,
José Pinto