Puppy Linux Discussion Forum

OscarTalks · Joined: 05 Feb 2012 Posts: 1773 Location: London, England

Hello n0ukf,

I took a glance at the website and MagicJack appears to be a SIP adapter, probably set up to use their own SIP service. It would almost certainly work, but would not involve PSIP Puppy Phone at all. You have to plug in a normal phone and use that.

If you use the cheaper basic version of MagicJack it establishes networking through the USB port so it would just be a question of whether or not that works in Puppy. I guess it would be OK, but anyway if you have the PLUS version of MagicJack it can connect to your router via an ethernet cable so you don't even need to have a computer switched on at all.

There are other adapters available and other options for using SIP for calling (via PSIP or something else). Don't let the advertising of any one product fool you. Investigate the pros and cons bearing in mind your own needs and read the small print before parting with your money.

redandwhitestripes · Joined: 02 Jan 2009 Posts: 179

Hi guys,
I just signed up with Evaphone and I want to use PP as my softphone in Precise, frugal.. I can just about connect to a sip tester line from mouselike but I've no idea if my Evaphone login details have been correctly inserted, or how I can even check?! I've tried calling several cell numbers using the full international prefix but nothing seems to happen, the log just says "outgoing"

Here's a snap of my input (obviously I've hidden my password). If my settings are wrong or I'm missing something obvious, please put me straight. Many thanks.

OscarTalks · Joined: 05 Feb 2012 Posts: 1773 Location: London, England

Try like this in the first instance:-

SIP URL sip:803145157@evaphone.com

Registrar sip:evaphone.com

Auth Realm evaphone.com (or just *)

Auth User 803145157

Secure voice call unticked

Notes:-
Colon not a dot after initial "sip"
Auth Realm may work with just an asterisk (wildcard)

Close preferences AND quit and restart PSIP

If the settings are correct, click the "Logged Out" button in the main GUI
It should go green and show you as "Logged In" almost instantly.

I'm chatting to CatDude in PSIP now and he made this pic:-

redandwhitestripes · Joined: 02 Jan 2009 Posts: 179

^^^^
Thanks so much for taking the time, Oscar.I really appreciate you and Catdude helping out. Sadly it still doesn't work but that's probably just that Puppy and Evaphone are incompatible.

On that note, can anyone recommend a Skype-like service that they have used successfully within PuppyPhone? It needs to be a service I can top-up online.

Thanks

gcmartin · Joined: 14 Oct 2005 Posts: 6730 Location: Earth

Hi @RedandWhiteStripes

Is there a chance you can turn off your firewall, then test to see if it works for you? Afterwhich you can turn it back on.

There are 3 things which can affect proper dialer operations on PCs

your ISP
your router blocking the ports to the PC
your firewall

This assumes you have typed your setup definitions correctly.

Let us know

OscarTalks · Joined: 05 Feb 2012 Posts: 1773 Location: London, England

I just signed up for an Evaphone account to take a closer look and am logged in now in PSIP Puppy Phone.

The domain just needs and extra "sip." in it (like the Linphone accounts) so the correct login details will be like this:-

SIP URL sip:803145157@sip.evaphone.com

Registrar sip:sip.evaphone.com

Auth Realm *

Auth User 803145157

Password (your password)

Secure voice call unchecked

Then do as before, close, quit and restart PSIP just to be sure, then click the "Logged Out" button. Should log you in straight away.

smokey01 · Joined: 30 Dec 2006 Posts: 2731 Location: South Australia

Voipbuster is another good company that allows voip calls.

In Australia you can make calls to landlines and Mobiles for free. I can with my Samsung Galaxy S4 using MobileVOIP. I'm sure it would work on Psip too.

VoipBuster allows you to have an account for free.

http://www.voipbuster.com/en/dashboard

redandwhitestripes · Joined: 02 Jan 2009 Posts: 179

Well thank you everyone for the comments and help, I am pleased to say I got all my VOIP accounts logged in to PSIP in the end Very Happy

Now, ahem, how do I make external calls? Embarassed

I tried using the full international prefix in the 'call' line but nothing happens, no dial tone, no answer.

I searched PSIP's help section, this forum and a big chunk of this long thread but I couldn't find any further information.

EDIT: It's just occured to me that maybe PSIP is...errr...SIP only Embarassed

So then all I need is a means to record my calls from my x-lite softphone. MHWaveedit only captures one side of the conversations.

Anyone is welcome to add me sip:4323284@localphone.com

Thanks again, everyone.

gcmartin · Joined: 14 Oct 2005 Posts: 6730 Location: Earth

jamesbond · Joined: 26 Feb 2007 Posts: 3149 Location: The Blue Marble

redandwhitestripes · Joined: 02 Jan 2009 Posts: 179

Thanks everyone, I got things to work by putting the "sip:" prefix where required, exactly as Oscar demonstrated.

I still can't make outgoing calls, I request them exactly as you suggested jamesbond but it flashes in the "call" section for a split-second then vanishes. I'm guessing PSIP simply doesn't do that.

smokey01 · Joined: 30 Dec 2006 Posts: 2731 Location: South Australia

It appears Psip won't allow a call unless the full address is submitted, eg: sip:+61855555555@voipbuster.com however, voipbuster is only expecting to see +61855555555.

This may be the same with evaphone.

I have tried many combinations including the command line version without success.

In earlier versions I have called landlines with Psip via Gizmo.

Any ideas jamesbond?

OscarTalks · Joined: 05 Feb 2012 Posts: 1773 Location: London, England

Some of these providers have that extra sip. in the front of the domain name.

Try calling to sip:+6185555555@sip.voipbuster.com

Just to note also that the number should either be the full numerical international prefix or the international prefix using the "+" sign but not both, so for the UK it would be either sip:0044.......@domain or sip:+44.....@domain but NOT sip:+0044......@domain.

I know folks are busy, but it would be really nice if we could get this issue looked at. Really the standard functionality with any SIP softphone should be that you can log in with a provider and if you have credit you should be able to enter a PSTN number via the GUI dialpad and make a call to normal phones that way. Maybe even a PSIP with video support as well?

smokey01 · Joined: 30 Dec 2006 Posts: 2731 Location: South Australia

OscarTalks, I'm not sure if you are aware but pjsip-2.1, the Psip engine, has video support built in. I just haven't manage to get it working yet although I haven't tried very hard either.

Also You were right on the money with the dialing, the following worked perfectly:
The dialing entry for a landline:
sip:+61855555555@sip.voipbuster.com

Mobile:
sip:+614066555555@sip.voipbuster.com

Voipbuster Configuration for Psip

SIP URL: sip:username@viopbuster.com
Registrar: sip:sip.voipbuster.com
Auth Realm: *
Auth User: Username
Password: Password
Secure voice call: Unticked
Sip Proxy: Blank

Add Friend

Nickname: Whatever
SIP address: sip:+61855555555@sip.voipbuster.com
Category: Whatever

Problem solved

Be sure not to leave spaces in the phone number, it won't work.

Cheers

smokey01 · Joined: 30 Dec 2006 Posts: 2731 Location: South Australia

I've updated the help for Psip.

It now includes connection via no-ip and peer to peer.

It also describes how to make calls to landlines and mobile phones.
http://www.smokey01.com/help/psip/psip-help.html

Cheers