Same heremeowcats wrote:Yes external USB flash drive.
"Testing" Sensei & Sensei64
-
- Posts: 544
- Joined: Thu 22 Jan 2009, 14:20
@James C
Thanks for the good news. if you happen to have a machine with a 64-bit processor..could you give the sensei64 a whirl...
meowcats & nancy reagan,
I believe the save file is now working correctly when booting from USB (hopefully no kernel panic). i know the download is a little larger than usual...but i've made it abt 70MB lighter. If you want to try it again, and let me know your thoughts after...
Thanks for the good news. if you happen to have a machine with a 64-bit processor..could you give the sensei64 a whirl...
meowcats & nancy reagan,
I believe the save file is now working correctly when booting from USB (hopefully no kernel panic). i know the download is a little larger than usual...but i've made it abt 70MB lighter. If you want to try it again, and let me know your thoughts after...
-
- Posts: 544
- Joined: Thu 22 Jan 2009, 14:20
Foremost: I am a full noob, thus my reports might be false, while I hope not. ..stifiling wrote:@James C
meowcats & nancy reagan,
I believe the save file is now working correctly when booting from USB (hopefully no kernel panic). i know the download is a little larger than usual...but i've made it abt 70MB lighter. If you want to try it again, and let me know your thoughts after...
Though no kernel panic, at end of session was'nt asked whether or not wanted to save. This while according to setting was going to be "prompted" whether or not save.
Tested with FF but no history to be found while set to "save".
i made some necessary adjustments to the 32bit isos for users interested in usb flash drive booting.
i believe the problem nancy, may be that:
you should make the directory on your flash drive /mnt/sdb1/Sensei and copy the sfs files from the iso into that directory.
also use the boot paramater in your grub entry
and there should be no kernel panic or session saving issues.
i believe the problem nancy, may be that:
you should make the directory on your flash drive /mnt/sdb1/Sensei and copy the sfs files from the iso into that directory.
also use the boot paramater in your grub entry
Code: Select all
psubdir=/Sensei
that's not a task that would be too difficult to accomplish. kind of conflicted on it though. what would really be a great reason for using an updated kernel, opposed to an already well tested one? My experiences with newer kernels have brought about unwanted hardware issues.meowcats wrote:what do you think about providing a updated kernel?
I notice Barry also never rolls out the new Puppy releases, with the brand spanking new kernel. I wonder if his reasons for not doing so are similar to mine.
I'm not against that idea. It 'sounds' like a good idea. But is it? what's the benefit? Like i said i've only come across, "oh no! my ____ doesn't work anymore. let me figure out how to get this back on."
Of course the flipside to unwanted bugs/issues are that an outdated kernel may not have support for some newer hardware. So instead of 'it doesn't work anymore' it becomes 'why won't it work at all'
Especially for a portable frugal install, IMO more driver support > occasional bug.
also, I tried latest sensei and save file indeed works!
However I added "radeon" to modules in rc.conf, and on reboot my ati4850 goes off and "monitor out of range"
Especially for a portable frugal install, IMO more driver support > occasional bug.
also, I tried latest sensei and save file indeed works!
However I added "radeon" to modules in rc.conf, and on reboot my ati4850 goes off and "monitor out of range"
meowcats,
could you try installing:
and editing /etc/X11/xorg.conf changing line 3 from:
Driver "vesa"
to
Driver "radeon"
and see if that works...
could you try installing:
Code: Select all
pacman -S xf86-video-ati
and editing /etc/X11/xorg.conf changing line 3 from:
Driver "vesa"
to
Driver "radeon"
and see if that works...
it should be in the menu category "System" by the name of "System Profiler and Benchmark"Tote wrote:Hi stifling, going to show my ignorance here. I installed hardinfo using Pacman Express and I can run it by typing hardinfo in console, but is there an easy/obvious method I've overlooked to add it to Menu?
Many thanks.
could you take a look in LXTask....and see which process is using the most RAM...under RSS. 770MB is also ridiculously high.meowcats wrote:Using pfix=ram, free -m shows 770M used. That's just a default config that's loading with vesa
With 1GB save file and Radeon: 990M. using non pae because I need kernel 3.2+ for Carl 9170-fw
which kernel do u like from which puppy? i presently just yanks a prebuilt kernel from another puppy...and slams it in using this procedure...
I'm just wondering if that issue is being caused by the kernel though.
Tried Sensei64 while I've got a free minute ....... live cd booted to a prompt. Tried "startx" and "startxfce4" ...... got the prompt.
Did a quick frugal install booting with good old legacy Grub ..... same results..... only gets to a prompt.
Out of time tonight but it appears that the senapps64_001.sfs and sendesk64-xfce_001.sfs aren't loading.Didn't notice any mention that would inicate they were loading during the boot process.
Did a quick frugal install booting with good old legacy Grub ..... same results..... only gets to a prompt.
Code: Select all
VGA compatible controller : NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2) (prog-if 00 [VGA controller])
that's really strange. yes u should see that they loaded during the boot process. senapps and sendesk.James C wrote:Out of time tonight but it appears that the senapps64_001.sfs and sendesk64-xfce_001.sfs aren't loading.Didn't notice any mention that would inicate they were loading during the boot process.
when u tried it, did u use "psubdir" in the grub menu entry? If so, and u have a chance to try it again, could u try it w/o "psubdir".
i really don't see why that would matter though. i don't see how the main.sfs is loading...but the other two aren't. as if they aren't in range. i can't reproduce that exact same behavior.
Thank you, found it.stifiling wrote:it should be in the menu category "System" by the name of "System Profiler and Benchmark"Tote wrote:Hi stifling, going to show my ignorance here. I installed hardinfo using Pacman Express and I can run it by typing hardinfo in console, but is there an easy/obvious method I've overlooked to add it to Menu?
Many thanks.
In LXtask it shows ~110mb used, but when option 'count cache as used memory' is checked, then it shows ~770mb.stifiling wrote:could you take a look in LXTask....and see which process is using the most RAM...under RSS. 770MB is also ridiculously high.
which kernel do u like from which puppy? i presently just yanks a prebuilt kernel from another puppy...and slams it in using this procedure...
I'm just wondering if that issue is being caused by the kernel though.
free -m only shows the 770mb. A large portion is used by XFCE. ~120mb is used by X.
As far as kernels, the upup raring kernel, or fatdog 620. Both are modern kernels with lots of testers