Precise Puppy 5.5 Release Candidate

Please post any bugs you have found
Message
Author
User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#161 Post by BarryK »

tiangeng wrote:Install guvcview from PPM,but it not works.
I fixed a bug in PPM:
http://bkhome.org/blog2/?viewDetailed=00141

Apart from that, guvcview works on my laptop. The laptop's built-in camera works, get video, but no sound. Um, but I don't even know if my laptop has a built-in microphone, perhaps I have to plug one in.
[url]https://bkhome.org/news/[/url]

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#162 Post by James C »

Started installing both Ubuntu packages and a few pets...... no problems yet.
Attachments
Precise-5.4.9.3.jpg
(43.89 KiB) Downloaded 450 times

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#163 Post by James C »

Unable to mount usb flash drive.
Messages....
Detected drive

Code: Select all

Feb 22 06:56:49 puppypc15439 user.info kernel: [    0.639220] usb 1-4: New USB device found, idVendor=0951, idProduct=1603
Feb 22 06:56:49 puppypc15439 user.info kernel: [    0.639225] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 22 06:56:49 puppypc15439 user.info kernel: [    0.639229] usb 1-4: Product: DataTraveler 2.0
Feb 22 06:56:49 puppypc15439 user.info kernel: [    0.639232] usb 1-4: Manufacturer: Kingston
Feb 22 06:56:49 puppypc15439 user.info kernel: [    0.639236] usb 1-4: SerialNumber: 0019E06B9C90SK8704140BEB
Feb 22 06:56:49 puppypc15439 user.debug kernel: [    0.639593] usb-storage: device found at 2
Mount error

Code: Select all

Feb 22 06:56:49 puppypc15439 user.notice kernel: [    1.640695] scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
Feb 22 06:56:49 puppypc15439 user.notice kernel: [    1.641518] sd 2:0:0:0: [sdb] 3973120 512-byte logical blocks: (2.03 GB/1.89 GiB)
Feb 22 06:56:49 puppypc15439 user.notice kernel: [    1.642139] sd 2:0:0:0: [sdb] Write Protect is off
Feb 22 06:56:49 puppypc15439 user.debug kernel: [    1.642145] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
Feb 22 06:56:49 puppypc15439 user.err kernel: [    1.642765] sd 2:0:0:0: [sdb] No Caching mode page present
Feb 22 06:56:49 puppypc15439 user.err kernel: [    1.642769] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb 22 06:56:49 puppypc15439 user.debug kernel: [    1.644033] usb-storage: device scan complete
Feb 22 06:56:49 puppypc15439 user.err kernel: [    1.645386] sd 2:0:0:0: [sdb] No Caching mode page present
Feb 22 06:56:49 puppypc15439 user.err kernel: [    1.645390] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb 22 06:56:49 puppypc15439 user.info kernel: [    1.873499]  sdb: sdb1
Feb 22 06:56:49 puppypc15439 user.notice kernel: [    1.875564] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Feb 22 06:56:49 puppypc15439 user.info kernel: [   34.516685] usb 1-4: reset high-speed USB device number 2 using ehci-pci
Feb 22 06:56:49 puppypc15439 user.err kernel: [   49.653352] usb 1-4: device descriptor read/64, error -110
Feb 22 06:56:49 puppypc15439 user.err kernel: [   64.893394] usb 1-4: device descriptor read/64, error -110
Feb 22 06:56:49 puppypc15439 user.info kernel: [   65.103340] usb 1-4: reset high-speed USB device number 2 using ehci-pci
Feb 22 06:56:49 puppypc15439 user.info kernel: [   80.186916] usb 1-4: USB disconnect, device number 2
Feb 22 06:56:49 puppypc15439 user.info kernel: [   80.187165] sd 2:0:0:0: Device offlined - not ready after error recovery
Feb 22 06:56:49 puppypc15439 user.err kernel: [   80.187273] scsi 2:0:0:0: rejecting I/O to offline device
Last edited by James C on Fri 22 Feb 2013, 05:39, edited 2 times in total.

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#164 Post by BarryK »

kurtdriver wrote:
I agree.
Or at least put a scrollbar in the JWM theme chooser, so that having many themes won't expand the GUI from roof to floor -- at times I think the Exit button will reach China. :lol: The same happens in the Icon Set Chooser GUI, a scrollbar for that one would be great, too. :D
The Simple Network Setup script could really use a scrollbar, when using it in areas with many routers the list goes below the taskbar and the buttons, and passphrase input field are not visible.
OK, SNS now has a scrollbar if more than 11 wifi networks found.

This is in Woof, committed and uploaded.
[url]https://bkhome.org/news/[/url]

linuxcbon
Posts: 1312
Joined: Thu 09 Aug 2007, 22:54

#165 Post by linuxcbon »

Precise 5.4.92
- remasterpup2 doesn't accept "mounted iso" as "virtual CD"

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#166 Post by BarryK »

linuxcbon wrote:Precise 5.4.92

- # wag-profiles.sh
** (gtkdialog3:23869): ERROR **: gtkdialog: Error in line 14, near token '</label>': syntax error
** (gtkdialog3:23886): ERROR **: gtkdialog: Error in line 6, near token '</label>': syntax error
I don't think that wag-profiles.sh should be run from the terminal like that.

Rerwin last edited that script, he can comment if those errors are valid.

If Network Setup works, then wag-profiles.sh does too.
[url]https://bkhome.org/news/[/url]

drblock2
Posts: 153
Joined: Mon 19 Jan 2009, 12:38

Precise 5.4.9.3 (k3.8.0)

#167 Post by drblock2 »

Downloaded and installed Precise 5.4.93 (k3.8.0) on my ancient AMD Athlon 2 GB machine with NVIDIA GeForce FX 5200 graphics card.

I noted the following problems:

1. report-video lists the driver as "nouveau" although I booted with nouveau.modeset=0. The usual problem of blank menus does not occur and xorg.conf reports "vesa," which is probably correct. glxgears reports 35 fps. Switching the driver to "nv" yields 40 fps. Still much too slow.

2. The proprietary NVIDIA 173.14.35 and 173.14.36 drivers fail to compile with an error message:
ERROR: The kernel header file
'/lib/modules/3.8.0/build/include/linux/version.h' does not exist. The
most likely reason for this is that the kernel source files in
'/lib/modules/3.8.0/build' have not been configured.
The required file is, in fact, missing.

On the other hand, VirtualBox 4.2.4 compiles and runs perfectly.

3. Neither pnethood nor YASSM connect to a machine running Puppy (Slacko, Wary), but do connect to a Windows XP share.

4. Textmaker has the strange spell checking error I reported here:

http://murga-linux.com/puppy/viewtopic. ... 4&start=55

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

Re: Precise 5.4.9.3 (k3.8.0)

#168 Post by 01micko »

drblock2 wrote: 1. report-video lists the driver as "nouveau" although I booted with nouveau.modeset=0. The usual problem of blank menus does not occur and xorg.conf reports "vesa," which is probably correct. glxgears reports 35 fps. Switching the driver to "nv" yields 40 fps. Still much too slow.
Please try the latest discovery for NV-3X cards (including fx5200) and that is:

Code: Select all

pfix=ram nouveau.noaccel=1
Puppy Linux Blog - contact me for access

User avatar
Ray MK
Posts: 774
Joined: Tue 05 Feb 2008, 09:10
Location: UK

#169 Post by Ray MK »

Precise Puppy version 5.4.93

E732 (Acer) laptop with 2gig ram and an i3 proc.
Manual frugal to an NTFS partition and booting via grub4dos on an SDcard.

Very fast and all the basics work as expected OOTB.
Extremely low resource usage.
Fantastic Puppy which to this very average user seems to be as good as can be reasonably expected.
Attachments
hardinfo_report.html.gz
(42.8 KiB) Downloaded 215 times
[b]Asus[/b] 701SD. 2gig ram. 8gb SSD. [b]IBM A21m[/b] laptop. 192mb ram. PIII Coppermine proc. [b]X60[/b] T2400 1.8Ghz proc. 2gig ram. 80gb hdd. [b]T41[/b] Pentium M 1400Mhz. 512mb ram.

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Precise Puppy 5.5beta

#170 Post by Billtoo »

I installed 5493 non pae to an 8gb ext4 formatted SDHC card using the
puppy universal installer and grub4dos as the boot loader.
VIDEO REPORT: Precise Puppy, version 5.4.93

Chip description:
VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Manhattan
[Mobility Radeon HD 5400 Series]
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1600x900
Depth (bits, or planes): 24
Modules requested to be loaded: synaptics dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): ati
Loaded modules: dbe dri dri2 exa extmod fb glx kbd mouse radeon ramdac record
synaptics
Actual rendering on monitor:
Resolution: 1600x900 pixels (423x238 millimeters)
Depth: 24 planes
OpenGL
Vendor X.Org
Renderer Gallium 0.4 on AMD CEDAR
Version 2.1 Mesa 8.0.4
Direct Rendering Yes
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
301 frames in 5.0 seconds = 60.185 FPS
300 frames in 5.0 seconds = 59.952 FPS
300 frames in 5.0 seconds = 59.954 FPS
300 frames in 5.0 seconds = 59.955 FPS
Computer
Processor 4x Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz
Memory 3103MB (101MB used)
Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express)
(rev 01)
Audio Adapter USB-Audio - Sound Blaster X-Fi Go! Pro

I installed lxterminal and guvcview from ppm (guvcview works)
I compiled and made pets of several applications.
I installed pemasu's google-chrome-fix-for-deb-install-0.0.1.pet +
google-chrome-stable_current_i386.deb, also installed opera_12.14.1738_i386.deb

I was unable to compile the ati propietary driver, it gave an error:
Supported adapter detected.
Check if system has the tools required for installation.
fglrx installation requires that the system have kernel headers.
/lib/modules/3.8.0/build/include/linux/version.h cannot be found on this system.
One or more tools required for installation cannot be found on the system.
Install the required tools before installing the fglrx driver.
Optionally, run the installer with --force option to install without the tools.
Forcing install will disable AMD hardware acceleration and may make your system
unstable. Not recommended.

Apart from not being able to install the ati driver every else is
working well so far.
Attachments
screenshot.jpg
(41.32 KiB) Downloaded 1070 times

LateAdopter
Posts: 361
Joined: Fri 27 May 2011, 17:21
Location: Reading UK

#171 Post by LateAdopter »

Hello BarryK

Precise 5.4.93

Thanks for the CPUID & MSR modules.

Installed and everything is normal on initial configuration: Athlon II X2, RS880G

I have installed TurionPowerControl. Run from rc.local and it is working correctly.

Thanks.

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

Re: Precise 5.4.9.3 (k3.8.0)

#172 Post by rcrsn51 »

drblock2 wrote:Downloaded and installed Precise 5.4.93 (k3.8.0) ..... Neither pnethood nor YASSM connect to a machine running Puppy (Slacko, Wary), but do connect to a Windows XP share.
This problem is specific to very new kernels and Samba-TNG servers. I don't think that there is any solution.

You will need to use a full Samba package in Puppy.

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#173 Post by pemasu »

Barry. About google-chrome patch. I forgot that google-chrome needs data and media cache restriction.
I have improved the patch so that it now sets those restrictions to 10 Mb. Otherwise /tmp or savefile will be eaten by accumulated data.

Here is the fixed code for google-chrome .deb installation.

Code: Select all

google-chrome-*)
if [ -f /usr/bin/bbe ];then #bbe is a sed-like utility for binary files.
if [ -f /opt/google/chrome/chrome  ];then
bbe -e 's/geteuid/getppid/' /opt/google/chrome/chrome > /tmp/chrome-temp1
mv -f /tmp/chrome-temp1 opt/google/chrome/chrome
chmod 755 /opt/google/chrome/chrome
echo '[Desktop Entry]
Encoding=UTF-8
Version=1.0
Name=Google Chrome
GenericName=Web Browser
Comment=Access the Internet
Exec=/usr/bin/google-chrome
Terminal=false
Type=Application
Icon=/opt/google/chrome/product_logo_48.png
Categories=WebBrowser;' > /usr/share/applications/google-chrome.desktop
if [ -f /usr/bin/google-chrome ];then
rm -f /usr/bin/google-chrome
fi
echo '#!/bin/sh
exec /opt/google/chrome/google-chrome --user-data-dir=/root/.config/chrome --disk-cache-size=10000000 --media-cache-size=10000000 "$@"' > /usr/bin/google-chrome
chmod 755 /usr/bin/google-chrome
ln -s /usr/bin/google-chrome /usr/bin/chrome
   fi
  fi
 ;;

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#174 Post by pemasu »

ERROR: The kernel header file
'/lib/modules/3.8.0/build/include/linux/version.h' does not exist. The
most likely reason for this is that the kernel source files in
'/lib/modules/3.8.0/build' have not been configured.
Try this fix:

Code: Select all

ln -s /lib/modules/3.8.0/build/include/generated/uapi/linux/version.h /lib/modules/3.8.0/build/include/linux/version.h
I had to create similar symlink for 3.7.2 kernel source. It worked.

User avatar
rerwin
Posts: 2017
Joined: Wed 24 Aug 2005, 22:50
Location: Maine, USA

#175 Post by rerwin »

BarryK wrote:
linuxcbon wrote:Precise 5.4.92

- # wag-profiles.sh
** (gtkdialog3:23869): ERROR **: gtkdialog: Error in line 14, near token '</label>': syntax error
** (gtkdialog3:23886): ERROR **: gtkdialog: Error in line 6, near token '</label>': syntax error
I don't think that wag-profiles.sh should be run from the terminal like that.

Rerwin last edited that script, he can comment if those errors are valid.

If Network Setup works, then wag-profiles.sh does too.
Barry is correct. Wag-profiles.sh is a code file included by net_setup.sh and should not be run standalone:

Code: Select all

. ${APPDIR}/ndiswrapperGUI.sh
. ${APPDIR}/wag-profiles.sh
Both of those files should not have execute permission. That way, they can be run via "." but not by themselves.
Richard


BTW, note that I have provided a replacement for the 5.5beta frisbee package:
http://murga-linux.com/puppy/viewtopic. ... 092#684092
I added that notice to my earlier posting about frisbee. Anyone using frisbee should replace it, to restore some of the text that should display. Also, is anyone else seeing wireless reconnects every 30 seconds. other than with driver wl?

npierce
Posts: 858
Joined: Tue 29 Dec 2009, 01:40

Improving contrast for ls listing of devices

#176 Post by npierce »

linuxcbon wrote:- when doing for instance ls /dev/ram0 it displays in bright color not easily readable.
linuxcbon,

The default colors used by ls were intended for the Linux text console, which has a black background. You could swap urxvt's foreground and background colors by adding this line to your ~/.Xdefaults file:

Code: Select all

urxvt.reverseVideo: True
(You might want to change the font as well, since Nimbus Mono L, the font that is defined in ~/.Xdefaults seems less legible in reverse video. I simply removed it from ~/.Xdefaults, and let urxvt use a default font.)

But if you prefer the current white background, you can simply change the background color that ls uses to list block devices and character devices.

Add this line to your ~/.bashrc file:

Code: Select all

export LS_COLORS='bd=40;33;01:cd=40;33;01'
Alternatively, you could put it in your /etc/profile.local file or in an appropriate line in your /etc/profile file.

mchabez
Posts: 12
Joined: Thu 21 Feb 2013, 13:01

#177 Post by mchabez »

Hi everyone, I found another debdb2pupdb bug. It's in 5.4.3, I have to check yet in the 5.5beta.
Some Ubuntu packages have weird dependencies like "udev(>=", "libx11-6(>>" and so on. The root cause is that in the Ubuntu package databases, in the package dependency data, sometimes the dependent package name and version requirement has no space between them.

To check which packages are affected, run this command:
Code:

grep -e "|+.*(.*|" ~/.packages/Packages-ubuntu-*

Edit: Latest Woof as of 21th Feb 2013 also has this bug.
Cross-posting this from the 5.4.3 thread, 5.5beta has this bug, too.

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#178 Post by pemasu »

DOTconfig in 3.8.0 kernel:
# CONFIG_BRCMSMAC is not set

brcmsmac has not been enabled as module, but...the option is now visible....so it is almost there. I suppose brcmsmac can be compiled as independent module without need to recompile whole kernel.

Raffy would like the brcmsmac module....I believe.

Oh...
# CONFIG_BRCMFMAC_USB is not set
I believe that option would give more supported chips for brcmfmac....but not sure....I have always enabled it.

/lib/modules/3.2.29 ....in 3.8.0 kernel Precise Puppy. No need to say more. Some DISTRO_SPECS rows need disabling for 3.8 kernel version.

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#179 Post by pemasu »

ar5523 is a Linux kernel driver for the Atheros AR5005UG (802.11b/g) and AR5005UX (802.11a/b/g) USB wireless LAN chipsets.

Firmware is required for device operation.

modinfo ar5523
filename: /lib/modules/3.8.0/kernel/drivers/net/wireless/ath/ar5523/ar5523.ko
firmware: ar5523.bin

http://www.ubuntuupdates.org/package/xo ... x-firmware

http://ppa.launchpad.net/xorg-edgers/pp ... 00_all.deb
ar5523: Add firmware for new driver
I hope that firmware is ok.

firmware.dep need again editing and all-firmware possibly new folder for the firmware...or/if how Barry decide with this driver. It is included anyway in the build.

EDIT. Just informational note. New driver:
# modinfo wil6210
filename: /lib/modules/3.8.0/kernel/drivers/net/wireless/ath/wil6210/wil6210.ko
description: Driver for 60g WiFi WIL6210 card

http://wireless.kernel.org/en/users/Drivers/wil6210
Attachments
ar5523-firmware.tar.gz
(70.57 KiB) Downloaded 240 times

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Precise Puppy 5.5beta

#180 Post by Billtoo »

This pc has a hauppage pvr card in it:
Multimedia video controller Internext Compression Inc iTVC16 (CX23416)
Video Decoder (rev 01)
With other recent pups if I put the firmware for it in /lib/firmware
and then reboot, I can use the vlc option to open the capture device
PVR and watch tv but that isn't working with this 380 kernel.
Attachments
vlcerror.jpg
(25.05 KiB) Downloaded 787 times

Post Reply