Während Slacko 5.3.3 problemlos startet, bekomme ich 5.4 nur gestartet, wenn ich die Bootoption acpi=off mitgebe.
Das hat den Nachteil, dass bspw. das Energiemanagement nicht mehr funktioniert und vielleicht noch weitere Nachteile?
Gibt es eine Möglichkeit, zu eruieren, was genau nicht funktioniert, damit man vielleicht eine etwas restriktivere acpi - Methode nutzen kann?
ACPI
Sehr sonderbar, ich habe eine Lösung für mein Problem im #!-Forum gefunden - dank Kristallgoogel.
Ich muss gar nicht das ganze acpi ausschalten.
Folgende Startoptionen führen zu einem funktionierendem System.Kann mir jemand erklären, was das bedeutet? Ich habe keine Ahnung, aber es scheint zu funktionieren.
Ich muss gar nicht das ganze acpi ausschalten.
Folgende Startoptionen führen zu einem funktionierendem System.
Code: Select all
i8042.nomux=1 highres=off nohz=off irqpoll
[color=blue][size=75]Toshiba Satallite M30X-124 | ATI Mobility Radeon 9700 | Intel PRO/Wireless 2200BG
Most Linux need special boot options to boot on this laptop: i8042.nomux=1 highres=off nohz=off irqpoll[/size][/color]
Most Linux need special boot options to boot on this laptop: i8042.nomux=1 highres=off nohz=off irqpoll[/size][/color]
Einen Schritt weiter, aber kein bisschen schlauer...
Was ist ein multiplexing Controller?
Bei Highress hätte ich jetzt an Grafik gedacht, aber nicht an einen high resolution timer mode - was auch immer das sein soll?
Dynnamic Tics?
Badly broken firmware - neu in 5.4 - denn in 533 lief ja alles noch - unwahrscheinlich?
Code: Select all
i8042.nomux [HW] Don't check presence of an active multiplexing
controller
Code: Select all
highres= [KNL] Enable/disable high resolution timer mode.
Valid parameters: "on", "off"
Default: "on"
Code: Select all
nohz= [KNL] Boottime enable/disable dynamic ticks
Valid arguments: on, off
Default: on
Code: Select all
irqpoll [HW]
When an interrupt is not handled search all handlers
for it. Also check all handlers each timer
interrupt. Intended to get systems with badly broken
firmware running.
[color=blue][size=75]Toshiba Satallite M30X-124 | ATI Mobility Radeon 9700 | Intel PRO/Wireless 2200BG
Most Linux need special boot options to boot on this laptop: i8042.nomux=1 highres=off nohz=off irqpoll[/size][/color]
Most Linux need special boot options to boot on this laptop: i8042.nomux=1 highres=off nohz=off irqpoll[/size][/color]