GUI to download LibreOffice - beta quality

Under development: PCMCIA, wireless, etc.
Message
Author
watchdog
Posts: 2021
Joined: Fri 28 Sep 2012, 18:04
Location: Italy

Re: GUI to download LibreOffice

#161 Post by watchdog »

01micko wrote:
watchdog wrote:Versions 0.19 of get-libreoffice fails to obtain a working sfs for wary 5.3. In precise 5.4.3 it works. The sfs obtained with version 0.19 in wary 5.3 can't be mounted. With version 0.13 of get-libreoffice previously used by mine to obtain a earlier sfs of Libreoffice3.5.0 I was instead able to obtain a sfs of libreoffice3.6.4 working in wary and precise.
Did you build in Precise then try to mount in Wary?.
Confirm what I previously said. I have builded in wary 5.3 Libreoffice 3.6.4 with version 0.19 of get-libreoffice: it cannot be mounted and it doesn't work. Sometime ago I builded Libreoffice 3.6.3 in precise 5.4.1 with get-libreoffice version .19: it works in precise but not in wary. Problems with scripts I suppose. Libreoffice3.6.4 obtained with version 0.13 of get-libreoffice in wary works in wary and precise but in wary the first mounting and/or start is difficult. Then it finally works. No problem instead with Libreoffice3.5.0.

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#162 Post by 01micko »

Thanks watchdog.

there are 2 bugs actually, one is my fault the other is a wary "bug" (or maybe a feature).

First, when I added support for the RAM mode installation I didn't take into account that bootmanager can't shift the file like sfs_load can. If you have less than 2 GB usable memory (eg 1 GB RAM, 1 GB swap) you wouldn't notice that bug.

Second, wary semi-supports xz compression. That is, it can compress and decompress with xz but it can't mount it. I don't know if it's a bug or by design but anyway I am now testing if the kernel is greater or equal to a 3x kernel then we default to xz, else gz for 2 series is used, and this is also now reflected in the filename (xz or gz is appended). I think that is the bug you and other wary users may have been getting.

Version 0.20 should fix your issue. posting it now.
Puppy Linux Blog - contact me for access

tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

USB Problem

#163 Post by tlchost »

01micko wrote:
Version 0.20 should fix your issue. posting it now.
Running Slacko 5,4 as bootable USB. Version 2 reports that it will not work with low memory/usb drive.

I have 16 gigs memory...so it must not like the USB drive. Reverting to 1.9 which works for me.

Thom

watchdog
Posts: 2021
Joined: Fri 28 Sep 2012, 18:04
Location: Italy

Testing get_libreoffice 0.20 in wary 5.3

#164 Post by watchdog »

01micko wrote: Second, wary semi-supports xz compression. That is, it can compress and decompress with xz but it can't mount it. I don't know if it's a bug or by design but anyway I am now testing if the kernel is greater or equal to a 3x kernel then we default to xz, else gz for 2 series is used, and this is also now reflected in the filename (xz or gz is appended). I think that is the bug you and other wary users may have been getting.

Version 0.20 should fix your issue. posting it now.
Testing successfull. Builded working Libreoffice-3.6.4_xx_gz.sfs in wary 5.3. It works in precise, too.

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#165 Post by 01micko »

tlchost, thanks for testing, probably something silly I did fixing the calculations for lupu's busybox. I'll fix it shortly.

watchdog, thanks for the report, glad your issue is fixed.

Cheers
Puppy Linux Blog - contact me for access

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#166 Post by edoc »

I have been using LibreOffice 3.50 in Exprimo 5x15 Frugal on a Netbook.

Is this PET the best way to update it to 3.64, please?

I use it daily so don't want guess wrong, use the wrong process, and break things!

Thanks!
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#167 Post by 01micko »

Edoc

Just unload the 3.5 version before starting a build, should work ok. If it happens to fail you can reload the 3.5 version.

Hth
Puppy Linux Blog - contact me for access

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#168 Post by 01micko »

0.21 is out.

See main post
Puppy Linux Blog - contact me for access

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#169 Post by edoc »

0.20 failed here, three tries.

I will try 0.21 a little later ...

Thanks!

EDIT:

BTW: Isn't GET supposed to restart when interrupted?

The GET from the PET was interrupted and just stalled.

I started a new GET and rather than picking up where it stalled it started new
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#170 Post by edoc »

No apparent joy with 0.21 in Exprimo 5x15 either.

I will try a reboot and see if it just isn't showing up.

EDIT: On reboot there was no evidence in Exprimo 5x15 of the 0.21 GET other than a couple of desktop icons out of place.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
smokey01
Posts: 2813
Joined: Sat 30 Dec 2006, 23:15
Location: South Australia :-(
Contact:

#171 Post by smokey01 »

edoc, wget -c will resume with failed downloads.
edoc wrote:0.20 failed here, three tries.

I will try 0.21 a little later ...

Thanks!

EDIT:

BTW: Isn't GET supposed to restart when interrupted?

The GET from the PET was interrupted and just stalled.

I started a new GET and rather than picking up where it stalled it started new

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#172 Post by 01micko »

edoc, there is no guarantee things will work if the download breaks and you close the shell. I use "-t 0 -c" options which means unlimited tries and continue if the download breaks.

You might be better off getting a prebuilt version,here's a link to 3.6.3 (nluug) , not the latest but still recent.
Puppy Linux Blog - contact me for access

tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

#173 Post by tlchost »

01micko wrote:0.21 is out.
Works fine on a bootable USB...thanks once again.

Thom

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#174 Post by edoc »

01micko wrote:edoc, there is no guarantee things will work if the download breaks and you close the shell. I use "-t 0 -c" options which means unlimited tries and continue if the download breaks.

You might be better off getting a prebuilt version,here's a link to 3.6.3 (nluug) , not the latest but still recent.
In the 0.21 case the download appeared to run smoothly, no interruptions, it simply did not build anything and did not produce any error messages.

Are you aware of anyone successfully testing this in Exprimo?

I appreciate the effort and would like to help spot why it is not working here.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#175 Post by 01micko »

edoc,

Try version 0.17 (pemasu had some input on that one.) Be aware that the .desktop files might not work correctly as they added Unity stuff which messes them up in 3.6x series. If it does work then I have introduced a bug.

Also, running get_libreoffice from commandline might give us some useful info for debugging.
Puppy Linux Blog - contact me for access

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#176 Post by edoc »

0.17 via get_libreoffice worked perfectly!

Code: Select all

# get_libreoffice
ok
en-US
EXIT="Exit on timeout"
this is 3.6.4
major ver: 3.6
/usr/sbin/get_libreoffice: line 697: 17537 Terminated              gtkdialog-splash -close never -icon /usr/share/pixmaps/throbber.gif -bg green -text "$INFOMSG1"
false
false

/initrd/mnt/dev_save/libre_download/LibO_3.6.4.3_Linux_x86_install-deb_en-US/DEBS
sed: -e expression #1, char 0: no previous regular expression
sed: -e expression #1, char 0: no previous regular expression
/usr/sbin/get_libreoffice: line 342: 23646 Terminated              gtkdialog-splash -close never -icon /usr/share/pixmaps/throbber.gif -bg yellow -text "$INFOMSG2a $LIBO_EN_US $INFOMSG2b"  (wd: ~)
/initrd/mnt/dev_save/libre_download/LibO_3.6.4.3_Linux_x86_install-deb_en-US/DEBS
_en-US
EXIT="Exit on timeout"
gtk-update-icon-cache: Cache file created successfully.
/usr/sbin/sfs_load: line 180:  7105 Terminated              $GTKDIALOG -p DIALOG -c > /dev/null
Generating /root/.icewm/menu...
Generating /root/.icewm/menu.nls...
Generating /root/.jwmrc...
/usr/sbin/sfs_load: line 2386:  7298 Terminated              $GTKDIALOG -p DIALOG -c > /dev/null
sfs_load: --stop
# 
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
vicmz
Posts: 1262
Joined: Sun 15 Jan 2012, 22:47

#177 Post by vicmz »

Spanish locale updated
Attachments
MoManager-es_AR-get_libreoffice-0.21.tar.gz
(2.94 KiB) Downloaded 385 times
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]

User avatar
darkcity
Posts: 2534
Joined: Sun 23 May 2010, 19:16
Location: near here
Contact:

#178 Post by darkcity »

Hi I tried version 0.21 on Slacko 5.3.1 (frugal install to HD)

I got "No space left on device" error from command line.

However, personal pupsave has 554M left of 1GB

The only extra I ordered was the Danish language pack.

-Mounted File Systems-
rootfs / 45.08 % (553.5 MiB of 1007.9 MiB)
/dev/sda1 /initrd/mnt/dev_save 51.28 % (8.9 GiB of 18.3 GiB)
/dev/loop1 /initrd/pup_rw 45.08 % (553.5 MiB of 1007.9 MiB)
/dev/loop0 /initrd/pup_ro2 100.00 % (0.0 B of 121.6 MiB)
/dev/loop4 /initrd/pup_ro4 100.00 % (0.0 B of 32.5 MiB)
/dev/loop5 /initrd/pup_ro5 100.00 % (0.0 B of 27.5 MiB)
unionfs / 45.08 % (553.5 MiB of 1007.9 MiB)
shmfs /dev/shm 0.00 % (501.3 MiB of 501.3 MiB)
/dev/sda2 /mnt/sda2 96.02 % (748.5 MiB of 18.3 GiB)

-Computer-
Processor : AMD Athlon(tm) 64 Processor 3200+
Memory : 2074MB (222MB used)

Any help appreciated ; -)
Attachments
reportgetlibre.txt.gz
NOT gz, just remove ".gz" from the name (forum restriction)
(32.83 KiB) Downloaded 377 times

linux_guy
Posts: 16
Joined: Sat 27 Oct 2012, 20:05
Location: Virginia

#179 Post by linux_guy »

Hi and thanks for this much needed simplicity to get LibreOffice working with new Java update. I used 0.21 pet to get LibreOffice 3.6.5.2 on Slacko Puppy 5.3.3 frugal.

However, (1) document types are not associated with the LibreOffice programs in Rox. These would include any that LibreOffice can open, such as MS Office 2007/2010 xlsx spreadsheet files and so on.

Also, (2) if I enter scalc (for instance) the command can't be found; same for swriter, sdraw, simpress, sbase, smath or soffice.

tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

LibreOffice 4 released

#180 Post by tlchost »

Does not seem to create the newly released LibreOffice 4.x

Thom

Post Reply