ArchPup - Puppy based on Arch Linux
Testing .2
Pwireless still not connecting to my wlan... It find my wpa wlan but after press connect, nothing happens. Can some one share a wpa_config file?
But then again... savefile also don't work... during boot, after found savefile gives kernel panic...
Pwireless still not connecting to my wlan... It find my wpa wlan but after press connect, nothing happens. Can some one share a wpa_config file?
But then again... savefile also don't work... during boot, after found savefile gives kernel panic...
T_Hobbit
:idea: Rebuilding old DOS Machine for Wing Commander Privateer and Puppy :!: Old spare parts to give away - anyone interested :?:
:idea: Rebuilding old DOS Machine for Wing Commander Privateer and Puppy :!: Old spare parts to give away - anyone interested :?:
Is your save file in a usb?T_Hobbit wrote: But then again... savefile also don't work... during boot, after found savefile gives kernel panic...
If not in usb, in which disk and partition is it at?
== [url=http://www.catb.org/esr/faqs/smart-questions.html]Here is how to solve your[/url] [url=https://www.chiark.greenend.org.uk/~sgtatham/bugs.html]Linux problems fast[/url] ==
How do you "add b43 firmware"? please. And any chance of posting your wpa_supplicant? I'm still struggling. cheers.Keef wrote:Up and running with wifi now. Had to edit the sfs though and add b43 firmware, and a script to get it all running - pwireless2 is not showing anything for me. I cheated and put an already configured wpa_supplicant.conf into etc/.
darkcity: Thanks, good job It looks nice.
I've just discovered that before you can use packer it is necessary to run this command:
so I wanted to share that info here and will also update first page.
I've just discovered that before you can use packer it is necessary to run this command:
Code: Select all
update-ca-certificates
On an USB. Inside archpup folder. FAT filesystem.mavrothal wrote:Is your save file in a usb?T_Hobbit wrote: But then again... savefile also don't work... during boot, after found savefile gives kernel panic...
If not in usb, in which disk and partition is it at?
Installed thru FlashPup install process from Slacko.
I tryed to move savepup to the USB root - no go.
I erased savepup and it boots fine... but still no wifi connection.
Do I need to have devx and kernel sfs on the USB stick?
Make no sense since sfs are only installed on boot after save file is make...
Last edited by T_Hobbit on Sat 08 Dec 2012, 12:21, edited 1 time in total.
T_Hobbit
:idea: Rebuilding old DOS Machine for Wing Commander Privateer and Puppy :!: Old spare parts to give away - anyone interested :?:
:idea: Rebuilding old DOS Machine for Wing Commander Privateer and Puppy :!: Old spare parts to give away - anyone interested :?:
i copied and pasted /lib/firmware from out of the saluki sfs and added 'modprobe b43 &' to the top of /root/.xinitrcgreengeek wrote:How do you "add b43 firmware"? please. And any chance of posting your wpa_supplicant? I'm still struggling. cheers.Keef wrote:Up and running with wifi now. Had to edit the sfs though and add b43 firmware, and a script to get it all running - pwireless2 is not showing anything for me. I cheated and put an already configured wpa_supplicant.conf into etc/.
i still couldn't get pwireless2 working after that so installed wicd using pacman. it took a nice meat of mbs installing it but i don't mind giving the space, for the stability.
I had this issue too.T_Hobbit wrote:On an USB.mavrothal wrote:Is your save file in a usb?T_Hobbit wrote: But then again... savefile also don't work... during boot, after found savefile gives kernel panic...
If not in usb, in which disk and partition is it at?
Looks like that ArchPup can not boot from USB (yet).
== [url=http://www.catb.org/esr/faqs/smart-questions.html]Here is how to solve your[/url] [url=https://www.chiark.greenend.org.uk/~sgtatham/bugs.html]Linux problems fast[/url] ==
Seems so... Posting from a running Archpup installed on an internal HD at my father in law desktop computer with savefile OK.
Checked the size of both savefiles: on this desktop it has 262.1 MB, on my USB only 220MB.
Maybe the savefile script didn't finish saving all savefile to the USB? Too slow compared to an HD?
Just need to find out how to solve the wifi problem... maybe it's related?
Checked the size of both savefiles: on this desktop it has 262.1 MB, on my USB only 220MB.
Maybe the savefile script didn't finish saving all savefile to the USB? Too slow compared to an HD?
Just need to find out how to solve the wifi problem... maybe it's related?
T_Hobbit
:idea: Rebuilding old DOS Machine for Wing Commander Privateer and Puppy :!: Old spare parts to give away - anyone interested :?:
:idea: Rebuilding old DOS Machine for Wing Commander Privateer and Puppy :!: Old spare parts to give away - anyone interested :?:
I just run some tests with booting from usb device. USB is formated as FAT32 and I used
unetbootin in windows to create bootable Live USB. It works if you don't have savefile
or if savefile is on hard disk partition. But if you create savefile on USB after reboot it gives
kernel panic !? I don't know why would empty savefile make that problem.
unetbootin in windows to create bootable Live USB. It works if you don't have savefile
or if savefile is on hard disk partition. But if you create savefile on USB after reboot it gives
kernel panic !? I don't know why would empty savefile make that problem.
misc
I love it, thank you
a couple of issues
1. does not correctly display swedish special characters otherwise fine
2. Cannot install torbrowser bundle from aur. Says "stdin not in gzip format"
2.5 Cannot install tixati from aur. says "cannot find strip binary for object file stripping"
3. How do you run a program as spot? Tried to run tor browser bundle but it complained at being run from the root user account. (downloaded tar ball with browser)
4. Have sometimes problems with screen tearing when palying video
Internet connection works well although I manually had to call dhcpcd. Pacman works fine. ffmpeg,mplayer2, smplayer works with a little tweaking (removing some jpeg stuff)
When I have time I will try to install bumblebee from Aur
Again very good work. Maybe now I can scrap my windows?
a couple of issues
1.
Code: Select all
setxkbmap se
2. Cannot install torbrowser bundle from aur. Says "stdin not in gzip format"
2.5 Cannot install tixati from aur. says "cannot find strip binary for object file stripping"
3. How do you run a program as spot? Tried to run tor browser bundle but it complained at being run from the root user account. (downloaded tar ball with browser)
4. Have sometimes problems with screen tearing when palying video
Internet connection works well although I manually had to call dhcpcd. Pacman works fine. ffmpeg,mplayer2, smplayer works with a little tweaking (removing some jpeg stuff)
When I have time I will try to install bumblebee from Aur
Again very good work. Maybe now I can scrap my windows?
Re: misc
Hi
a/ Key maps:
true:
in ArchPup, it is different, the same map code produces that what in Debian or Slax etc. would be named us_accentos, a very reduced choice of chars only for south European languages...
b/ Browser comportment
I did try divers browsers and no one will proceed to connect with
localhost:631 (tragic... Cups!)
localhost:8000 (only didiwiki but it would be better to be able!)
what experience did have other users with this important detail concerning directly the ability or not to print in ArchPup?
Kind regards
a/ Key maps:
true:
the keymaps seem don't to be from puppy and we have now different results and in this details, they are not better, for me in all cases: I write with the us_intl from Puppy and have a great choice of char including some chars for slave and north European languages (and all chars for west European languages completely correct).Scooby wrote:1.does not correctly display swedish special characters otherwise fineCode: Select all
setxkbmap se
in ArchPup, it is different, the same map code produces that what in Debian or Slax etc. would be named us_accentos, a very reduced choice of chars only for south European languages...
b/ Browser comportment
I did try divers browsers and no one will proceed to connect with
localhost:631 (tragic... Cups!)
localhost:8000 (only didiwiki but it would be better to be able!)
what experience did have other users with this important detail concerning directly the ability or not to print in ArchPup?
Kind regards
My savefile is now loading
greengeek
Use a Puppy that your wifi is working on.
Look in lib/firmware and copy the folder corresponding to your driver (in my case 'b43')
Copy it to lib/firmware in Archpup - if 'firmware' doesn't exist, then create it.
In Archpup you will also probably have to create a file called 'firmware.dep.3.8.6' in etc/modules/
This needs to refer to your module, and in my case the line needed is just 'b43:b43.ko'
(I can't profess to understand this fully, I've arrived at it by trial and error, mainly the latter...)
wpa_supplicant.conf is specific to your own connection (contains your SSID and password etc) so again, copy a working one from somewhere else. It is in etc/.
I then run the following script, based on info from
How to configure wifi from the commandline
greengeek
Use a Puppy that your wifi is working on.
Look in lib/firmware and copy the folder corresponding to your driver (in my case 'b43')
Copy it to lib/firmware in Archpup - if 'firmware' doesn't exist, then create it.
In Archpup you will also probably have to create a file called 'firmware.dep.3.8.6' in etc/modules/
This needs to refer to your module, and in my case the line needed is just 'b43:b43.ko'
(I can't profess to understand this fully, I've arrived at it by trial and error, mainly the latter...)
wpa_supplicant.conf is specific to your own connection (contains your SSID and password etc) so again, copy a working one from somewhere else. It is in etc/.
I then run the following script, based on info from
How to configure wifi from the commandline
Code: Select all
#!/bin/sh
#
dhcpcd -k wlan0
ifconfig wlan0 down
ifconfig wlan0 up
# first remove stale wpa_supplicant file if it exists
if [ -e /var/run/wpa_supplicant/* ];
then rm /var/run/wpa_supplicant/*;
fi
wpa_supplicant -i wlan0 -D wext -c /etc/wpa_supplicant.conf -q -B
sleep 30 # 30 for testing - try lower if successful, higher if not.
## first remove stale existing dhcpcd files if exist
if [ -e /var/lib/dhcpcd/dhcpcd-* ]; then rm /var/lib/dhcpcd/dhcpcd-*; fi
dhcpcd -t 30 -h archpup -d wlan0
# A result here should mean success...
echo `ifconfig wlan0 | grep '\<inet\>' | sed -n '1p' | tr -s ' ' | cut -d ' ' -f3 | cut -d ':' -f2`
Running as user spot seems impossible unless you do this changes:
open file /etc/passwd and change home folder for spot from /root/spot to /opt/spot
Then make his home folder and set ownership:
mkdir /opt/spot
chown spot:users /opt/spot
su spot
Now firefox will run as user spot, but will look ugly, and no way to change theme
with lxappearance.
@Scooby: To fix "cannot find strip binary for object file stripping" load development sfs.
How to make TOR Browser Bundle work as root
http://murga-linux.com/puppy/viewtopic. ... 484#669484
open file /etc/passwd and change home folder for spot from /root/spot to /opt/spot
Then make his home folder and set ownership:
mkdir /opt/spot
chown spot:users /opt/spot
su spot
Now firefox will run as user spot, but will look ugly, and no way to change theme
with lxappearance.
@Scooby: To fix "cannot find strip binary for object file stripping" load development sfs.
How to make TOR Browser Bundle work as root
http://murga-linux.com/puppy/viewtopic. ... 484#669484
Printing under Archpup
Hi
alternative does someone know a(n other) way to print out in Archpup?
New Question:
c/ Texts of menu
Please step by step information what is to do to change the menu so that all dynamic functions stay preserved
(objective: change the language of course...)?
Is unicode possible (Serbian for example )?
Kind regards
did someone try to start Cups in his browseroui wrote:b/ Browser comportment
I did try divers browsers and no one will proceed to connect with
localhost:631 (tragic... Cups!)
localhost:8000 (only didiwiki but it would be better to be able!)
what experience did have other users with this important detail concerning directly the ability or not to print in ArchPup?
alternative does someone know a(n other) way to print out in Archpup?
New Question:
c/ Texts of menu
Please step by step information what is to do to change the menu so that all dynamic functions stay preserved
(objective: change the language of course...)?
Is unicode possible (Serbian for example )?
Kind regards
For oui, How to make ArchPup speak french
Download locale.alias.gz, remove false gz extension and copy this file to /usr/share/locale
then open /etc/locale.gen, uncomment
fr_FR.UTF-8 UTF-8
fr_FR ISO-8859-1
en_US ISO-8859-1
en_US.UTF-8 UTF-8
then in terminal run locale-gen.
Open /etc/profile and add this
See screenshot below..
Download locale.alias.gz, remove false gz extension and copy this file to /usr/share/locale
then open /etc/locale.gen, uncomment
fr_FR.UTF-8 UTF-8
fr_FR ISO-8859-1
en_US ISO-8859-1
en_US.UTF-8 UTF-8
then in terminal run locale-gen.
Open /etc/profile and add this
Code: Select all
export LANG="fr_FR.UTF-8"
export LC_CTYPE="fr_FR.UTF-8"
export LC_NUMERIC="fr_FR.UTF-8"
export LC_TIME="fr_FR.UTF-8"
export LC_COLLATE="fr_FR.UTF-8"
export LC_MONETARY="fr_FR.UTF-8"
export LC_MESSAGES="fr_FR.UTF-8"
export LC_PAPER="fr_FR.UTF-8"
export LC_NAME="fr_FR.UTF-8"
export LC_ADDRESS="fr_FR.UTF-8"
export LC_TELEPHONE="fr_FR.UTF-8"
export LC_MEASUREMENT="fr_FR.UTF-8"
export LC_IDENTIFICATION="fr_FR.UTF-8"
export LC_ALL="fr_FR.UTF-8"
- Attachments
-
- locale.alias.gz
- (2.51 KiB) Downloaded 659 times