Kdenlive-0.9.2 for Saluki
- battleshooter
- Posts: 1378
- Joined: Wed 14 May 2008, 05:10
- Location: Australia
Kdenlive-0.9.2 for Saluki
I've had this lying around my hard drive for awhile. You need both SFSs:
Download:
Kdenlive-0.9.2.sfs
KDE_Basic-4.8.sfs
About Kdenlive
Kdenlive is an intuitive and powerful multi-track video editor, including most recent video technologies. Supports DV, AVCHD and HDV editing. Kdenlive relies on several other open source projects, such as FFmpeg, the MLT video framework and Frei0r effects.
I still love Kdenlive. I've been messing with the more advanced features like green screen and compositing for special effects and it's not bad at it.
I haven't tested it on Carolina or the latest Saluki but I think it should be alright as they basically have the same base.
Install:
Best to apply on a clean pupsave or one without existing an existing QT install.
Being open minded However, I've also given Openshot a go. If that's more down your alley, you can find it here.
Download:
Kdenlive-0.9.2.sfs
KDE_Basic-4.8.sfs
About Kdenlive
Kdenlive is an intuitive and powerful multi-track video editor, including most recent video technologies. Supports DV, AVCHD and HDV editing. Kdenlive relies on several other open source projects, such as FFmpeg, the MLT video framework and Frei0r effects.
I still love Kdenlive. I've been messing with the more advanced features like green screen and compositing for special effects and it's not bad at it.
I haven't tested it on Carolina or the latest Saluki but I think it should be alright as they basically have the same base.
Install:
Best to apply on a clean pupsave or one without existing an existing QT install.
Being open minded However, I've also given Openshot a go. If that's more down your alley, you can find it here.
Last edited by battleshooter on Fri 09 Nov 2012, 07:12, edited 1 time in total.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=94580]LMMS 1.0.2[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94593]Ardour 3.5.389[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94629]Kdenlive 0.9.8[/url]
to answer your question from the openshot thread, kdenlive didn't work for me here either.
This is the terminal output
I will try from a fresh state and see what happens
This is the terminal output
Code: Select all
kdenlive: symbol lookup error: /usr/lib/libnepomukutils.so.4: undefined symbol: _ZN19QAbstractProxyModel11setItemDataERK11QModelIndexRK4QMapIi8QVariantE
- battleshooter
- Posts: 1378
- Joined: Wed 14 May 2008, 05:10
- Location: Australia
I think it's a QT thing. Do you have an existing install of QT?
That's the tricky thing about dependencies . See how a fresh state goes, it will most likely work but I'm not sure how to get these files to play nice with existing clashing dependencies.
That's the tricky thing about dependencies . See how a fresh state goes, it will most likely work but I'm not sure how to get these files to play nice with existing clashing dependencies.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=94580]LMMS 1.0.2[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94593]Ardour 3.5.389[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94629]Kdenlive 0.9.8[/url]
-
- Posts: 597
- Joined: Thu 13 Nov 2008, 13:45
- battleshooter
- Posts: 1378
- Joined: Wed 14 May 2008, 05:10
- Location: Australia
Interesting, I haven't had that problem of not saving correctly. Was this on a fresh pup save?mini-jaguar wrote:Seems to run pretty smoothly, except for one problem: I cannot get it to save and load project files correctly. I eventually got it to save some files, but it refuses to read them back, or even acknowledge they are the correct type of files.
For loading files, I found there was a weird filter on that wouldn't let you see the Kdenlive save files. I can't give you the exact steps on how to switch it off as I'm not at home at the moment but I think if the text starting with an * in the file location is deleted you should be able to see the Kdenlive project save files.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=94580]LMMS 1.0.2[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94593]Ardour 3.5.389[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94629]Kdenlive 0.9.8[/url]
-
- Posts: 597
- Joined: Thu 13 Nov 2008, 13:45
Yes, save file with no packages.
That is interesting about the workaround to find the files, but you don't need to do that on any of the other kdenlive versions I've tried. But it's also missing some effects that I need, so I'm not going to use it.
This Kdenlive does also work with other packages installed, I tried it a few days ago and haven't run into any problems there (other than the weird project saving).
On the other hand, your Openshot .sfs for Saluki seems to not want to co-exist with any other packages installed, although it seems to work fine by itself as far as I could tell. It's not that I don't appreciate the time you put into this, but I tend to think that you are doing something wrong if you make packages incompatible with other packages.
The packages in the repositories and many of the ones in this forum, for example, mostly work with other software installed. Jack, for example, is totally compatible with Ardour and lmms, and lmms is compatible with Ardour, even though any of these would cause the Kdenlive you made for Lucid to malfunction or the other way around (they stop working instead).
To be fair, your packages may work fine on your system, but you should use Saluki 23, that one is a release candidate, the earlier versions are just alpha/beta versions.
That is interesting about the workaround to find the files, but you don't need to do that on any of the other kdenlive versions I've tried. But it's also missing some effects that I need, so I'm not going to use it.
This Kdenlive does also work with other packages installed, I tried it a few days ago and haven't run into any problems there (other than the weird project saving).
On the other hand, your Openshot .sfs for Saluki seems to not want to co-exist with any other packages installed, although it seems to work fine by itself as far as I could tell. It's not that I don't appreciate the time you put into this, but I tend to think that you are doing something wrong if you make packages incompatible with other packages.
The packages in the repositories and many of the ones in this forum, for example, mostly work with other software installed. Jack, for example, is totally compatible with Ardour and lmms, and lmms is compatible with Ardour, even though any of these would cause the Kdenlive you made for Lucid to malfunction or the other way around (they stop working instead).
To be fair, your packages may work fine on your system, but you should use Saluki 23, that one is a release candidate, the earlier versions are just alpha/beta versions.
-
- Posts: 597
- Joined: Thu 13 Nov 2008, 13:45
Actually I take that back. This is not as bad as it looked earlier.
I'm still testing this, I'm going to find out what makes it tick.
Installed the pup monitor (crucial upgrade which fixes a bug of the recent Saluki versions), as well as the Gimp and Openshot .sfses.
Surprise: not only do they all work, but I also get the effects I needed in Kdenlive. They are apparently part of the freiOr package which you must have added to the openshot .sfs.
To load Kdenlive projects: you have to rename (or perhaps save) the projects with the .kdenlive extension. Then type the name directly, you have to comb through the file system to find them as kdenlive does not see them.
I'm still testing this, I'm going to find out what makes it tick.
Installed the pup monitor (crucial upgrade which fixes a bug of the recent Saluki versions), as well as the Gimp and Openshot .sfses.
Surprise: not only do they all work, but I also get the effects I needed in Kdenlive. They are apparently part of the freiOr package which you must have added to the openshot .sfs.
To load Kdenlive projects: you have to rename (or perhaps save) the projects with the .kdenlive extension. Then type the name directly, you have to comb through the file system to find them as kdenlive does not see them.
-
- Posts: 597
- Joined: Thu 13 Nov 2008, 13:45
- battleshooter
- Posts: 1378
- Joined: Wed 14 May 2008, 05:10
- Location: Australia
My apologizes I haven't been responding to all the excellent debugging you've been doing mini-jaguar. I think the major incompatibility problems arise from including my own version if QT in the Kdenlive package. I tend to compile my own version of QT when compiling Kdenlive as in general the repository ones aren't compiled with the correct options to compile Kdenlive. However, it seems your tests indicate it is fine to simply run Kdenlive with the repository QT.
So all that said, I may need to rerelease the Kdenlive package either including the repository QT or just completely without it so that it will work with all the other said programs that require QT. Phew.
So all that said, I may need to rerelease the Kdenlive package either including the repository QT or just completely without it so that it will work with all the other said programs that require QT. Phew.
Oh crap. I forgot to add frei0r to the Kdenlive package. I remember testing it and then noting it wasn't there. I thought I added it after that, but I guess I didn't. Another thing to add to the repackaging.Surprise: not only do they all work, but I also get the effects I needed in Kdenlive. They are apparently part of the freiOr package which you must have added to the openshot .sfs.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=94580]LMMS 1.0.2[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94593]Ardour 3.5.389[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94629]Kdenlive 0.9.8[/url]
Kdenlive-0.9.2 for Slacko 5.6 non-pae
Hi Battleshooter & all,
See my post here: http://www.murga-linux.com/puppy/viewto ... 972#753057.
Kdenlive-0.9.2 also seem to work fine OOTB.
mikesLr
See my post here: http://www.murga-linux.com/puppy/viewto ... 972#753057.
Kdenlive-0.9.2 also seem to work fine OOTB.
mikesLr
Kdenlive (KDE 137MB)
Kdenlive 0.5 is included in LegacyOS, version 0.9.2 downloaded, but i don't succed loading it in spite of no error message. I will do it with Saluki, soon.
Openshot 1.4.3 runs in ToOpPy and Pupjibaro
1.4.0 runs in slacko (thin) . Runs means Editing, not only reading.
Nevertheless Kdenlive remains the best and safest tool for video editing.
I test the two SFS as soon as possible. I will inform.
I am now on Slacko, i will test it on Saluki 013.
Openshot 1.4.3 runs in ToOpPy and Pupjibaro
1.4.0 runs in slacko (thin) . Runs means Editing, not only reading.
Nevertheless Kdenlive remains the best and safest tool for video editing.
I test the two SFS as soon as possible. I will inform.
I am now on Slacko, i will test it on Saluki 013.