Puppy Linux Discussion Forum

[wsamh]

never mind. I found out that I had to install qt. So it works, but I am not getting sound.

[elroy]

[elroy]

[wsamh]

I am using saluki. I am not able to get my nvidia driver to work on carolina. That is the reason for the delay. I follwed the directions on the forum. I even tried to install an older version, but did not work. This is what I got when I did it through the terminal. Hope this will help.


# mumble
socket(): Address family not supported by protocol
PulseAudio: Connection failure: Connection refused
G15LCDEngineUnix: Unable to connect to G15Daemon.
Locale is en_US
TextToSpeech: Failed to contact speech dispatcher.
Database SQLite: "3.7.7.1"
Overlay: Listening on "/root/.MumbleOverlayPipe"
GlobalShortcutX: /dev/input/event0: AT Translated Set 2 keyboard
GlobalShortcutX: /dev/input/event1: PixArt USB Optical Mouse
GlobalShortcutX: /dev/input/event2: Power Button
GlobalShortcutX: /dev/input/event3: Sleep Button
GlobalShortcutX: /dev/input/event4: Power Button
AudioInput: 40000 bits/s, 48000 hz, 480 sample CELT
OSSInput: Starting audio capture from /dev/dsp
AudioInput: Initialized mixer for 1 channel 48000 hz mic and 0 channel 48000 hz echo
OSSOutput: Initialized
AudioOutput: Initialized 2 channel 48000 hz mixer
OSSOutput: Starting audio playback to /dev/dsp
OSInfo: Failed to execute lsb_release
warning: The VAD has been replaced by a hack pending a complete rewrite
OSSInput: Releasing.
OSSOutput: Releasing device
OSSOutput: Destroyed
AudioInput: 40000 bits/s, 48000 hz, 480 sample CELT
OSSOutput: Initialized
OSSInput: Starting audio capture from /dev/dsp
AudioInput: Initialized mixer for 1 channel 48000 hz mic and 0 channel 48000 hz echo
OSSInput: Releasing.
AudioOutput: Initialized 2 channel 48000 hz mixer
OSSOutput: Starting audio playback to /dev/dsp
OSSOutput: Releasing device
OSSOutput: Destroyed
AudioInput: 40000 bits/s, 48000 hz, 480 sample CELT
OSSOutput: Initialized
OSSInput: Starting audio capture from /dev/dsp
AudioInput: Initialized mixer for 1 channel 48000 hz mic and 0 channel 48000 hz echo
AudioOutput: Initialized 2 channel 48000 hz mixer
OSSOutput: Starting audio playback to /dev/dsp
warning: The VAD has been replaced by a hack pending a complete rewrite
OSSInput: Releasing.
AudioInput: 40000 bits/s, 48000 hz, 480 sample CELT
ALSAAudioInput: Initing audiocapture default.
ALSAAudioInput: Actual buffer 48000 hz, 1 channel 4096 samples [1024 per period]
AudioInput: Initialized mixer for 1 channel 48000 hz mic and 0 channel 48000 hz echo
warning: The VAD has been replaced by a hack pending a complete rewrite
OSSOutput: Releasing device
OSSOutput: Destroyed
ALSAAudioOutput: Initialized
ALSAAudioOutput: ALSA reports 10000 output channels. Clamping to 2.
ALSAAudioOutput: Actual buffer 48000 hz, 2 channel 2886 samples [481 per period]
ALSAAudioOutput: Initializing 2 channel, 48000 hz mixer
AudioOutput: Initialized 2 channel 48000 hz mixer
File "skin:wb_male.oga" failed to open
File "skin:wb_male.oga" failed to open
ALSAAudioInput: Releasing ALSA Mic.
ALSAAudioOutput: Destroyed
AudioInput: 40000 bits/s, 48000 hz, 480 sample CELT
ALSAAudioOutput: Initialized
ALSAAudioInput: Initing audiocapture default.
ALSAAudioInput: Actual buffer 48000 hz, 1 channel 4096 samples [1024 per period]
AudioInput: Initialized mixer for 1 channel 48000 hz mic and 0 channel 48000 hz echo
ALSAAudioOutput: ALSA reports 10000 output channels. Clamping to 2.
ALSAAudioOutput: Actual buffer 48000 hz, 2 channel 2886 samples [481 per period]
ALSAAudioOutput: Initializing 2 channel, 48000 hz mixer
AudioOutput: Initialized 2 channel 48000 hz mixer
warning: The VAD has been replaced by a hack pending a complete rewrite

[/code]

[jpup]

Actually, I accidentally tried it last night...

It was permanent couldn't recover from sleep

though I had C6 mode off in the bios

[elroy]

Just a FYI here...make sure to check the news, recent repo additions, and how-to's links on the first post of this thread. There you'll find a new tutorial, some recent additions to the repo, and the news page has been updated.

I've recompiled the 3.6.5 kernel to include a few more modules along with support for the math co-processor. If your computer supports it it'll use it; if not, it'll emulate it.

We've also decided that in the near future, probably within the next couple releases, that we'll be forking Carolina into two branches, One branch will be the full-blown Carolina that is currently offered. The other will be a non-PAE 3.6.5 kernel version with the more traditional apps offered by Saluki (with a few possible variations). If this is of interest to you, we'd certainly like to hear your feedback on what applications you think are worthy of inclusion (keep in mind that this version should be geared toward lighter applications, with stability/usability being a high-priority).

[jpup]

Hi elroy...

that's good news

when can we expect the release of 003?

I hope its gonna happen soon

I also hope there will be improvements on the network managers...

as well as an application for sharing your internet connection like a soft AP or hotspot.

by the way, battery life ain't lookin too good on carolina

I barely get past the 3 hour mark even on power save mode

this notebook can last 5.5 hours on power save with win7

and atleast 4 hours on normal settings.

Thanks.


looking forward to 003

[Marv]

[elroy]

[rg66]

I'm a big fan of the light version. I'd rather add what I want than try and remove stuff I don't. Also, I don't have to download a full ISO everytime a new version is out when I already have a copy of the apps dl'ed already.

As for people without an internet connection, how did they get the ISO in the first place?

[Sage]

I believe you could accurately guess my opinion re. lite, el ! Except, perhaps, lite-r...

If there's any access problem or difficulty with the PPM at any time for any reason, Dillo will always provide a basic link to acquire something more comprehensive. Or Links/e-links?

[yr1945]

yes... my opinion is to keep it really "lite"... i like to add only apps that i will be using... THANKS...

[KJ]

I agree as I use only a few of the apps in most puppies. If you keep the main .sfs tiny and add the glitz in the Adrive almost everyone can be happy. Thanks for all the time and hard work everyone has put into Carolina. KJ

[yerc1]

another vote here for lite especially non-pae.

as well as bringing my pentium m laptop back to life, carolina non-pae lite (npl) led to my discovery of the awesome gnewpet utility.

i created pet packages in saluki and installed them in carolina npl - galculator, geany, abiword, gnumeric, aiksaurus, gcolor, gstpw, hardinfo, lsalarm, mhwaveedit, mtpaint, orage, pupcamera, remmina, ristretto.
each one of the 'gnewpetted' packages had libgphoto2 as dependency, so i was of the impression (and i could be wrong here) carolina npl's builtin list should include libgphoto2.

thanks for carolina

[elroy]

Due to firmware issues, the new kernel will not be included in v.003. It's taking too long to sort the issues out; 003 has already been delayed, and to put it on hold indefinitely isn't productive at this point. And to release it with the new kernel issues sorted out wouldn't be desirable, either. We certainly don't want a repeat of what happened with v.001.

It sounds like more than a few of you are interested in the lite version, so instead of forking carolina to create a version that has the saluki default apps, perhaps it may be a better idea to split carolina into two separate versions - one for the current carolina that provides a usable OOTB experience (and Puppy introductory distro) intended for new users, and the other that is the lite version. Any objections to doing it that way?