Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Mon 20 Oct 2014, 20:50
All times are UTC - 4
 Forum index » Advanced Topics » Additional Software (PETs, n' stuff) » Drivers
Drivers for Puppy 5.1-5.2.8 with 2.6.33.2 kernel
Post new topic   Reply to topic View previous topic :: View next topic
Page 11 of 13 [183 Posts]   Goto page: Previous 1, 2, 3, ..., 9, 10, 11, 12, 13 Next
Author Message
peebee


Joined: 21 Sep 2008
Posts: 1459
Location: Malvern, Worcs, UK

PostPosted: Mon 12 Mar 2012, 18:47    Post subject: New Broadcom STA wl pet for lupu k2.6.33  

I've created a new version of the Broadcom-STA pet for lupu-528

The latest version is attached to rerwin's post:
http://murga-linux.com/puppy/viewtopic.php?t=70855&start=1486

This pet is an update of the one previously made by piratesmack using the latest Broadcom sources and new installation and startup logic developed by rerwin.

The background (and equivalent pets for other puppies) are described:
http://www.murga-linux.com/puppy/viewtopic.php?p=609360#609360

If anybody tests it please provide feedback - thanks.

Cheers
peebee

_________________
LxPup-14.10 = Puppy + LXDE

Last edited by peebee on Thu 26 Apr 2012, 02:29; edited 2 times in total
Back to top
View user's profile Send private message Visit poster's website 
tempestuous

Joined: 10 Jun 2005
Posts: 5270
Location: Australia

PostPosted: Wed 14 Mar 2012, 04:02    Post subject:  

Semme wrote:
Hi Tempestuous, would you afford me a quick overview on how you built this pkg- so I can learn something for my effort?

All you need to do is run the "make" command ...
but I think you first need fully configured kernel sources!
By this, I mean that not only does the kernel source need to be present, it also needs to be configured, and maybe also compiled. This will ensure that all the necessary kernel source headers are built.

To configure your kernel source, do this -
Code:
cd /usr/src/linux-2.6.33.2
make menuconfig

This will present you with the kernel configuration menu. There's no need to change anything in this menu, just exit, and save if prompted to do so.
This simple exercise will create a number of kernel configuration files. At this point it's feasible that you can go ahead and compile your "easy-slow-down-manager" package, but maybe not ... so proceed to the full kernel compilation -
Code:
make bzImage

then
Code:
make modules

Now you have a full kernel development environment. The "easy-slow-down-manager" drivers will certainly compile now.
Back to top
View user's profile Send private message 
tempestuous

Joined: 10 Jun 2005
Posts: 5270
Location: Australia

PostPosted: Thu 19 Apr 2012, 00:44    Post subject:  

Here are several ADSL USB modem drivers, of the modem-type which uses "PPP over ATM" communication.
The following 5 drivers are included:

cxacru - for the Conexant AccessRunner
speedtch - for the Alcatel SpeedTouch
ueagle-atm - for the ADI 930/Eagle
usbatm - for generic USB ATM/DSL modems
xusbatm - for USB ADSL modems initialized in userspace

I have included the necessary firmware for the ueagle-atm driver, but I cannot legally provide the necessary firmware for the cxacru and speedtch drivers. You will need to find this firmware, yourself, and place it in /lib/firmware
The cxacru driver requires: cxacru-fw.bin
The speedtch driver requires: speedtch-1.bin and speedtch-2.bin

And since PPP-over-ATM is not supported in Puppy Lucid (nor any other standard Puppy), you must also install the ATM networking drivers.

Here are the 2 dotpets -
http://www.smokey01.com/tempestuous/atm-k2.6.33.2.pet
http://www.smokey01.com/tempestuous/USB-DSL-k2.6.33.2.pet

After installing these dotpets, reboot.
Configuration is explained by forum member jaydee here -
http://www.murga-linux.com/puppy/viewtopic.php?p=621473#621473

Last edited by tempestuous on Tue 26 Aug 2014, 21:41; edited 1 time in total
Back to top
View user's profile Send private message 
Pelo


Joined: 10 Sep 2011
Posts: 3220
Location: Mer méditerrannée (1 kms°)

PostPosted: Mon 23 Apr 2012, 12:49    Post subject: 2012 Driver B43 is fool and Luci 5.1.1 does not shut down
Subject description: rfkill-upgrade-k2.6.33.2 pet without any result
 

2012 Driver B43 is fool and Luci 5.1.1 does not shut down
rfkill-upgrade-k2.6.33.2 pet without any result

Have you issued a more recent version of lucid 5.1.1 repaired ?

Good evening.I amFrench, but i understand english, computing not to much.
Back to top
View user's profile Send private message Yahoo Messenger 
tempestuous

Joined: 10 Jun 2005
Posts: 5270
Location: Australia

PostPosted: Wed 25 Apr 2012, 19:17    Post subject:  

Pelo wrote:
2012 Driver B43 is fool and Luci 5.1.1 does not shut down

I'm guessing by "fool" you mean "not functioning". When you search this forum for "b43" you will see that this driver fails to work with certain (troublesome) models of Broadcom wifi devices. The problem is generally solved in newer Puppy versions with newer kernels and the new "brcmsmac" driver, but with older kernels (such as Lucid has) the only solution is to use the proprietary Broadcom wifi driver - this driver is posted by forum member peebee at the top of this page.



Be careful what you ask for, and what you might presume your solution to be;
Pelo wrote:
rfkill-upgrade-k2.6.33.2 pet without any result

No, this should not achieve any different result ... except for what was intended - wifi on/off switching.


Pelo wrote:
Have you issued a more recent version of lucid 5.1.1 repaired ?

I have never issued any version of Lucid "repaired".
Back to top
View user's profile Send private message 
dk60902


Joined: 26 Sep 2010
Posts: 223
Location: In front of my computer

PostPosted: Sun 20 May 2012, 21:20    Post subject:  

Does anyone have an explanation for this? I was successfully able to get wireless with a USB dongle, but I'm not sure why it works this way. I'm trying to learn more about Puppy LInux.

My setup is 5.2.8 with update 001 frugal install. For my wireless, I'm using a USB wireless N adapter with a Ralink Chipset, product ID 3070. My router is a linksys wrt120n with WPA2 encryption. The command cat /proc/bus/usb/devices gives me:

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=3070 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I:* If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt2870
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

If I use the internet setup wizard, Network Wizard or Simple network setup, the ralink module rt2800usb is loaded. Apparently, this may not work with WPA encryption. Nonetheless, I was unable to establish an internet connection. I installed Frisbee and tried to establish a connection, but again, no luck as expected. The strange thing is that I used a different wireless usb dongle (wireless G with chipset realtek (rtl8187)) to configure my network, establish connection, then replaced the realtek dongle with my ralink dongle, Frisbee connects to the internet consistently (on every boot). Can someone explain this to me?

Also, if I were to start from scratch and not configure the wireless with the realtek usb dongle, install a dot pet with the appropriate driver, do I need to blacklist rt2800usb module?
Back to top
View user's profile Send private message 
goolwa_pup


Joined: 29 Oct 2009
Posts: 57

PostPosted: Thu 28 Jun 2012, 08:23    Post subject: puppy 528 with momo logitech wheel not working  

installed the logitech and joystick utils pets from this thread and after reboot fftest states that force feedback function not implemented..any tricks to make force feedback work in puppy 528?....steering wheel works but no force feedback function
Back to top
View user's profile Send private message MSN Messenger 
pemasu


Joined: 08 Jul 2009
Posts: 5463
Location: Finland

PostPosted: Thu 28 Jun 2012, 08:39    Post subject:  

CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set

Above means that the module has not been compiled. Maybe Tempestuous has compiled that as module. Check this thread from the beginning.
Back to top
View user's profile Send private message 
kooliepup


Joined: 13 Jan 2012
Posts: 302
Location: Victoria, Australia

PostPosted: Mon 09 Jul 2012, 06:36    Post subject:  

Could I make a request for a kernel module and firmware file for it9135 for k2.6.33.2 please.
This is a dvb-usb device.
Fatdog 600 is the only Puppy I have found that has them.
Back to top
View user's profile Send private message 
ndujoe1

Joined: 04 Dec 2005
Posts: 699

PostPosted: Fri 13 Jul 2012, 21:19    Post subject: rtl8192cu testing  

I downloaded and install the 8192cu.pet. The boot screen indicates that the module in loaded on boot up.

When I run the network setup it does not see the device. Though I can load the module.

I have included snapshots of lsmod and pmodemdiag info.

the lsmod shows it

8192cu 29370 0

Hopefully you can fill in the gaps of info and provide direction.
I am using Puppylinux 5.25 lupu 5.25.
readouts.zip
Description 
zip

 Download 
Filename  readouts.zip 
Filesize  224.17 KB 
Downloaded  753 Time(s) 
Back to top
View user's profile Send private message 
mama21mama

Joined: 03 Apr 2010
Posts: 526
Location: Lincoln, Buenos Aires, Argentina

PostPosted: Tue 11 Sep 2012, 18:33    Post subject:  

tempestuous wrote:
Realtek N-mode wifi devices.


work lucid 5.25 r8192ce_pci-k2.6.33.2.pet

kernel 3 no work - as I do to compile the kernel 3?
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger 
Spaccafumo


Joined: 15 Jan 2009
Posts: 33
Location: Sulmona - Italy

PostPosted: Wed 27 Feb 2013, 04:39    Post subject: Drivers for Slacko. Kernel 2.6.37.6
Subject description: Linux 2.6.37.6 ehci_hcd
 

Any rt3070sta-2.6.37.6.pet?
-------------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=3070 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I:* If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt2870
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Saluti.

_________________
Qui si usa Linux
http://www.puppylinux.org
Sulmona - Italy
Back to top
View user's profile Send private message 
Pelo


Joined: 10 Sep 2011
Posts: 3220
Location: Mer méditerrannée (1 kms°)

PostPosted: Tue 02 Apr 2013, 04:27    Post subject: Please redo an ISO for Lucid 528
Subject description: people are still realising disabled LUcids
 

people are still realising disabled LUCIDs
LXDE lucid nite flux from spane : no sound, no wifi.
Even now ! we have all the correct drivers available. Please issue a new ISO including them.
And long life to Lucid !
Back to top
View user's profile Send private message Yahoo Messenger 
tallboy


Joined: 21 Sep 2010
Posts: 444
Location: Oslo, Norway

PostPosted: Tue 02 Apr 2013, 09:06    Post subject:  

Pelo and Spaccafumo, I am not a moderator, but I hope you don't mind me telling you that this thread is specifically for: Drivers for Puppy 5.1-5.2.8 with 2.6.33.2 kernel

Please make other requests and comments in the thread where they belong:

Pelo: http://www.murga-linux.com/puppy/viewtopic.php?t=70855

Spaccafumo: http://puppylinux.org/wikka/Puppy53?redirect=no

tallboy

_________________
True freedom is a live Puppy on a multisession CD/DVD.
Back to top
View user's profile Send private message 
Pelo


Joined: 10 Sep 2011
Posts: 3220
Location: Mer méditerrannée (1 kms°)

PostPosted: Wed 17 Apr 2013, 07:43    Post subject: I am stuck to my chair because of my laptop wireless
Subject description: Kernel 2.6.33.2 Lucid 528 with fluxbox or not fluxbox (wifi fails)
 

tallboy wrote:
Pelo and Spaccafumo, I am not a moderator, but I hope you don't mind me telling you that this thread is specifically for: Drivers for Puppy 5.1-5.2.8 with 2.6.33.2 kernel
tallboy

iwlagn :
What does that mean (here after) ?
The only solution at the moment seems to be deactivating wireless N mode and use wireless G mode only.
A lot of work has to be done here.

It will be my last try to be wirelessed with Lucid. I will stay chained to my ethernet cable ! but be cool, i just try to make things working, it's not a disaster ! Any news about this subject ? Merci les gars.
iwlagn.png
 Description   Kernel 2.6.33.2 Lucid 528 with fluxbox
 Filesize   11.97 KB
 Viewed   950 Time(s)

iwlagn.png

Back to top
View user's profile Send private message Yahoo Messenger 
Display posts from previous:   Sort by:   
Page 11 of 13 [183 Posts]   Goto page: Previous 1, 2, 3, ..., 9, 10, 11, 12, 13 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Additional Software (PETs, n' stuff) » Drivers
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1403s ][ Queries: 13 (0.0455s) ][ GZIP on ]