Saluki
Had to remove write permissions AND move luki023 to a new partition before i could click open the iso to copy the contents. This above was in racy522 and lupu528. Md5sum ok.
Frisbee connect aimiably.
Xnoise failed to open the 2 videos i tried.
Screen brightness function keys didnt seem to have any affect.
Frisbee connect aimiably.
Xnoise failed to open the 2 videos i tried.
Screen brightness function keys didnt seem to have any affect.
Last edited by aarf on Sun 19 Aug 2012, 08:54, edited 2 times in total.
- the last saviour
- Posts: 175
- Joined: Tue 13 Jul 2010, 12:41
- Location: Thailand
Geoffrey wrote:It does work, but you need to install a wallpaper changer xfwpcnm-1.0 to use it, though I did find that if installed from the package manager, gamin-0.1.9-486, Psip32-1.3-Saluki and xfce4-4.80 also want to be downloaded, these dependencies are not needed with Saluki 023, it seems there is a bug with the package manager.the last saviour wrote: 4. Image list doesn't change wallpaper properly.
Many thx for your suggestion.
My people are somebody who will move to crowded city because I have promised them the refuge in the big UFO station.
Now I'd found at least 5 aliens who live in Thailand. They are from Triangular constellation.
Now I'd found at least 5 aliens who live in Thailand. They are from Triangular constellation.
- the last saviour
- Posts: 175
- Joined: Tue 13 Jul 2010, 12:41
- Location: Thailand
Geoffrey wrote:It does work, but you need to install a wallpaper changer xfwpcnm-1.0 to use it, though I did find that if installed from the package manager, gamin-0.1.9-486, Psip32-1.3-Saluki and xfce4-4.80 also want to be downloaded, these dependencies are not needed with Saluki 023, it seems there is a bug with the package manager.the last saviour wrote: 4. Image list doesn't change wallpaper properly.
Many thx for your suggestion.
My people are somebody who will move to crowded city because I have promised them the refuge in the big UFO station.
Now I'd found at least 5 aliens who live in Thailand. They are from Triangular constellation.
Now I'd found at least 5 aliens who live in Thailand. They are from Triangular constellation.
i though others would have this so didnt provide clarification.aarf wrote: Xnoise failed to open the 2 videos i tried.
.
They were two files downloaded in android. One is a .mov file from Nasa for android, the other is .3gp file from you tube downloaded by operamini in android.
Not sure if saluki should aim at playing these formats.
Saluki on Distrowatch...
http://distrowatch.com/weekly.php?issue=20120820#new
http://distrowatch.com/weekly.php?issue=20120820#new
congratulations jemimah. Long overdue that your work get the airing and appreciation that you well deserve. Best wishes.James C wrote:Saluki on Distrowatch...
http://distrowatch.com/weekly.php?issue=20120820#new
this is normal ordinary mp4
Code: Select all
# xnoise
got 1 tracks for tracklist
FIME: xnoise-tracklist-model.vala add_uris
Segmentation fault
# xnoise
got 1 tracks for tracklist
FIME: xnoise-tracklist-model.vala add_uris
FIME: xnoise-tracklist-model.vala add_uris
(xnoise:3796): Gtk-CRITICAL **: gtk_list_store_get_path: assertion `iter->stamp == GTK_LIST_STORE (tree_model)->stamp' failed
GstError parsed: The autoaudiosink element is not working.
finished db saving
finished db saving
finished db saving
Change the theme in /usr/share/themes/Default/balou/logo.pngaarf wrote:how do i stop the black rat from running over my sleek saluki.
Searched but cant find the correct image to replace.
Turn if off in control panel > Desktop > session and startup
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
You can create a copy of the save button by dragging it from the menu to the desktop or a launcher by dragging to the panel,aarf wrote:No save button on desktop. So dialog in the save period needs to say 'in the menu'
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
Yes, the save issue has been a problem reported previously, I think there is a work around for it, off hand I can't think of who sorted that out, when I find it I'll let you know, more than likely someone who knows will see this and give you info to fix it.aarf wrote:i have it set to - 0 never, and just got a popup messaging that save is happening!
Thank again geoffrey dragging from the menu is a new trick i didnt know.
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
unwanted auto saves
aarf .... there may be some help for your auto save problems discussed on pages 219 ... 223 of this thread.
I've been running a frugal "manual save only" mode (13) in Saluki (and other Puppies) using USB and SD flash drives for a long time with very little problem. Just by setting the save interval to "0" with no "+or-". You can check out /etc/rc.d/rc.shutdown around line # 988 to see if it is set to "0" there. You can also change the time delay before "no save" auto shutdown in this section.
(In Saluki 22) I also had toI open /sbin/pup_event_frontend_d with 'defaulttexteditor' and changed line 9 from ramsaveinterval=30 to:
Code:
[ "$RAMSAVEINTERVAL" = "" ] && RAMSAVEINTERVAL=0 #412
That fixed the auto save problem for me. ... no problems since June. Hope this helps ....KJ
I've been running a frugal "manual save only" mode (13) in Saluki (and other Puppies) using USB and SD flash drives for a long time with very little problem. Just by setting the save interval to "0" with no "+or-". You can check out /etc/rc.d/rc.shutdown around line # 988 to see if it is set to "0" there. You can also change the time delay before "no save" auto shutdown in this section.
(In Saluki 22) I also had toI open /sbin/pup_event_frontend_d with 'defaulttexteditor' and changed line 9 from ramsaveinterval=30 to:
Code:
[ "$RAMSAVEINTERVAL" = "" ] && RAMSAVEINTERVAL=0 #412
That fixed the auto save problem for me. ... no problems since June. Hope this helps ....KJ
Any news from Jemimah, anyone?
She had "disapeared" before, but is good to know that at least she is "ok" and hopefully on other venues/priorities.
She had "disapeared" before, but is good to know that at least she is "ok" and hopefully on other venues/priorities.
== [url=http://www.catb.org/esr/faqs/smart-questions.html]Here is how to solve your[/url] [url=https://www.chiark.greenend.org.uk/~sgtatham/bugs.html]Linux problems fast[/url] ==
Re: unwanted auto saves
thanks KL, i had at look at it but done nothing. Not a huge problem. Reported mainly to note a fix is required in saluki or somewhere.KJ wrote:aarf .... there may be some help for your auto save problems discussed on pages 219 ... 223 of this thread.
I've been running a frugal "manual save only" mode (13) in Saluki (and other Puppies) using USB and SD flash drives for a long time with very little problem. Just by setting the save interval to "0" with no "+or-". You can check out /etc/rc.d/rc.shutdown around line # 988 to see if it is set to "0" there. You can also change the time delay before "no save" auto shutdown in this section.
(In Saluki 22) I also had toI open /sbin/pup_event_frontend_d with 'defaulttexteditor' and changed line 9 from ramsaveinterval=30 to:
Code:
[ "$RAMSAVEINTERVAL" = "" ] && RAMSAVEINTERVAL=0 #412
That fixed the auto save problem for me. ... no problems since June. Hope this helps ....KJ
Re: unwanted auto saves
Hi aarf, which browser are you using? I've been getting a bit suspicious of some of the self-updating behaviour of browsers lately.aarf wrote: i had at look at it but done nothing. Not a huge problem. Reported mainly to note a fix is required in saluki or somewhere.
Do you have updating enabled in your browser? I prefer to prevent my browser from ndoing any updates, and I certainly don't want it saving those updates to my savefile. (but I suspect some browsers do exhibit that behaviour...)
I've been putting off saying anything in regard to Jemimah, the last message I received from her was asking me if I would look after the Repo in case she went AWOL again, after she sent me the password I haven't heard from her, she hasn't retrieved any messages from my outbox and there are no post's from her since the 7th of July.mavrothal wrote:Any news from Jemimah, anyone?
She had "disapeared" before, but is good to know that at least she is "ok" and hopefully on other venues/priorities.
I 've been hoping that she would return before anybody actually asked her whereabouts, but this day had to come, at the moment there is only me and elroy maintaining the repo, as elroy is a moderator on the Saluki forum, he is able to keep it organized removing spam and answering questions to the new members, we have no admin so we are in limbo until Jemimah returns.
If anyone does have any other means of contacting Jemimah, it may pay to give her a call to check on her well being.
At a guess I'd say this maybe due to her failed employment, I'll say no more as it would only be speculation.
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]