Puppy-eloix: Electronics, Schematics and Engineering
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
The link which is suggested points to version 3.13, please download 3.15, that one is better. Here's the link:inoxidabile wrote:I'm sorry, but I tried from two positions, with two different pc and nevertheless I'm not able to download it.
Then, could You kindly give me a different link?
But, please, I would like to avoid any disturb to You and then if You will have any trouble for this , don't worry, it's fine however
http://i.minus.com/1339170650/J2aD-3XrY ... ix3.15.iso
I'd really appreciate it if someone could make it available via torrent download
regards,
abu ilya
Last edited by abu_ilya on Thu 07 Jun 2012, 20:25, edited 1 time in total.
ha, I tried to upload to sendspace, but after an hour it errored out - later found its max is 300Mb.
The link for 3.15 doesn't seem to work, found it here-
http://hugocoolens.minus.com/lGDamSjx888YI
but can't get it to start download. . .
BTW you can edit your first post to link to 3.15.
---
big file share thread here-
http://murga-linux.com/puppy/viewtopic.php?t=3778
they recommend
http://www.mydrive.ch/
The link for 3.15 doesn't seem to work, found it here-
http://hugocoolens.minus.com/lGDamSjx888YI
but can't get it to start download. . .
BTW you can edit your first post to link to 3.15.
---
big file share thread here-
http://murga-linux.com/puppy/viewtopic.php?t=3778
they recommend
http://www.mydrive.ch/
For me the original link does work, but "minus" seems not very reliable, sometimes it works, sometimes not...darkcity wrote:ha, I tried to upload to sendspace, but after an hour it errored out - later found its max is 300Mb.
The link for 3.15 doesn't seem to work, found it here-
http://hugocoolens.minus.com/lGDamSjx888YI
OK, I edited it, even though that may disturb the chronology of things a bitBTW you can edit your first post to link to 3.15.
OK, here it is:big file share thread here-
http://murga-linux.com/puppy/viewtopic.php?t=3778
they recommend
http://www.mydrive.ch/
http://www.mydrive.ch/download/19346558 ... ix3.15.iso
abu_ilya
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
Sorry, I did not know it worked that wayinoxidabile wrote:Thank You for Your support !
But now, this is what I see:
- minus link, it doesn't start any download
- mydrive link, it requires an username and a password, I tried the well-known words "puppy" and "linux" but without success.
Could You kindly tell me any suggestion?
username: puppy-eloix
passwd: linuxlinux
hope this finally helps
abu_ilya
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
nice, could you do something similar with:Barkin wrote:I did say "electro pup" but it's come out more like "electric pup" (WAV file in ZIP attached) ....abu_ilya wrote:Can you attach a sound sample pronouncing that? I can use it to replace the initial puppy-linux barking
'Ohm-My-Dawg'
Do you know _where_ to put the sound sample so it plays when starting up?
regards,
abu_ilya
- RetroTechGuy
- Posts: 2947
- Joined: Tue 15 Dec 2009, 17:20
- Location: USA
Re: What does it & they do? (puppy-eloix) (part2)
BTW, for those who haven't used it, EAGLE Rocks! If you wanted a professional tool, it's a good one to try (it's free for home users/non-profits -- what's a non profit? If you use it to make money, you're not non-profit -- but $50 gets you in the door with a basic registration).abu_ilya wrote: 7. Eagle 5.6.0
This is a freeware version of a PCB-design package which is very popular in Europe (certainly in Germany). The free version is limited to half a eurocard (16cm*10cm) and two layers for routing. Keeping in mind we do a lot with smd's these days these limitations are most of the time no problem at all.
You'll pay a lot more money to get any other CAD that works anywhere near as well.
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
Re: What does it & they do? (puppy-eloix) (part2)
Right you are, and what's great too is that it runs natively under Linux!RetroTechGuy wrote:BTW, for those who haven't used it, EAGLE Rocks! If you wanted a professional tool, it's a good one to try (it's free for home users/non-profits -- what's a non profit? If you use it to make money, you're not non-profit -- but $50 gets you in the door with a basic registration).abu_ilya wrote: 7. Eagle 5.6.0
This is a freeware version of a PCB-design package which is very popular in Europe (certainly in Germany). The free version is limited to half a eurocard (16cm*10cm) and two layers for routing. Keeping in mind we do a lot with smd's these days these limitations are most of the time no problem at all.
You'll pay a lot more money to get any other CAD that works anywhere near as well.
abu_ilya
"2barks.wav", in puppy-reference, audio is the start-up sound, I think, [ for some reason there is another copy of "2barks" but in AU format in the same directory]abu_ilya wrote:Do you know _where_ to put the sound sample so it plays when starting up?
- Attachments
-
- puppy sounds.png
- (8.59 KiB) Downloaded 519 times
Last edited by Barkin on Fri 08 Jun 2012, 19:52, edited 1 time in total.
- RetroTechGuy
- Posts: 2947
- Joined: Tue 15 Dec 2009, 17:20
- Location: USA
Re: What does it & they do? (puppy-eloix) (part2)
I started using it about 15 years ago. I always suspected that it was originally native under Linux, and later compiled for Windows...abu_ilya wrote:Right you are, and what's great too is that it runs natively under Linux!RetroTechGuy wrote:BTW, for those who haven't used it, EAGLE Rocks! If you wanted a professional tool, it's a good one to try (it's free for home users/non-profits -- what's a non profit? If you use it to make money, you're not non-profit -- but $50 gets you in the door with a basic registration).abu_ilya wrote: 7. Eagle 5.6.0
This is a freeware version of a PCB-design package which is very popular in Europe (certainly in Germany). The free version is limited to half a eurocard (16cm*10cm) and two layers for routing. Keeping in mind we do a lot with smd's these days these limitations are most of the time no problem at all.
You'll pay a lot more money to get any other CAD that works anywhere near as well.
abu_ilya
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
-
- Posts: 597
- Joined: Thu 13 Nov 2008, 13:45
Working in OZ
Download (428.4 MB)...from this site..
http://i.minus.com/1339111263/1gldZTsxr ... ix3.15.iso
I just did a quick save...and then cancelled it.
Chris.
Download (428.4 MB)...from this site..
http://i.minus.com/1339111263/1gldZTsxr ... ix3.15.iso
I just did a quick save...and then cancelled it.
Chris.