Dpup Exprimo 5.X.3.4.12 with 3.4.2 kernel.
Dpup Exprimo 5.X.3.4.2.1 with 3.4.2 kernel.
Manual frugal install to the hard drive.
Dpup Exprimo, version 5.X.3.4.2.2 on Fri 29 Jun 2012
Chip description:
0.0 VGA compatible controller
nVidia Corporation GT216 [GeForce GT 220] (rev a2)
oem: NVIDIA
product: GT216 Board - 0682vb12 Chip Rev
X Server: Xorg
Driver used: nvidia
X.Org version: 1.7.7
dimensions: 1440x900 pixels (411x263 millimeters)
depth of root window: 24 planes
Computer
Processor 2x Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz
Memory 3114MB (297MB used)
Operating System Unknown distribution
User Name root (root)
Date/Time Fri 29 Jun 2012 06:10:46 AM EDT
Version
Kernel Linux 3.4.2-dpup (i686)
Compiled #1 SMP Sun Jun 10 12:04:28 GMT-8 2012
C Library GNU C Library version 2.11.3 (stable)
Default C Compiler GNU C Compiler version 4.4.5 (Debian 4.4.5-8)
Distribution Unknown distribution
No problems.
EDIT:One small problem, in firefox doing ctrl ++ to increase the font size temporarily freezes firefox,not a problem in qupzilla though.
Dpup Exprimo, version 5.X.3.4.2.2 on Fri 29 Jun 2012
Chip description:
0.0 VGA compatible controller
nVidia Corporation GT216 [GeForce GT 220] (rev a2)
oem: NVIDIA
product: GT216 Board - 0682vb12 Chip Rev
X Server: Xorg
Driver used: nvidia
X.Org version: 1.7.7
dimensions: 1440x900 pixels (411x263 millimeters)
depth of root window: 24 planes
Computer
Processor 2x Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz
Memory 3114MB (297MB used)
Operating System Unknown distribution
User Name root (root)
Date/Time Fri 29 Jun 2012 06:10:46 AM EDT
Version
Kernel Linux 3.4.2-dpup (i686)
Compiled #1 SMP Sun Jun 10 12:04:28 GMT-8 2012
C Library GNU C Library version 2.11.3 (stable)
Default C Compiler GNU C Compiler version 4.4.5 (Debian 4.4.5-8)
Distribution Unknown distribution
No problems.
EDIT:One small problem, in firefox doing ctrl ++ to increase the font size temporarily freezes firefox,not a problem in qupzilla though.
- Attachments
-
- screenshot.jpg
- (129.77 KiB) Downloaded 849 times
Last edited by Billtoo on Fri 29 Jun 2012, 12:22, edited 1 time in total.
Billtoo said :
'' I'm in fatdog right now, I did a fatdog vlc last night too, it played 8/8 in the mkv test suite.
I try that command in the slacko compiled vlc shortly. ''
Hi , Biltoo
In my fatdog 600b1 I tried hard to make subtitles show on in VLC without any success...
I was searching the forum for some informations to understand why VLC doesn't show subtitles in fatdog 600 and saw your previous comment .
Looking back in fatdog 521 or LH64 5.14 (running in wine ) there are also no subtitles in VLC .
Are there any settings to fit or the issue is deeper
'' I'm in fatdog right now, I did a fatdog vlc last night too, it played 8/8 in the mkv test suite.
I try that command in the slacko compiled vlc shortly. ''
Hi , Biltoo
In my fatdog 600b1 I tried hard to make subtitles show on in VLC without any success...
I was searching the forum for some informations to understand why VLC doesn't show subtitles in fatdog 600 and saw your previous comment .
Looking back in fatdog 521 or LH64 5.14 (running in wine ) there are also no subtitles in VLC .
Are there any settings to fit or the issue is deeper
I think kirk is going to recompile vlc for the next release of fatdog64-600, tell him about subtitles not working.Gobbi wrote: In my fatdog 600b1 I tried hard to make subtitles show on in VLC without any success...
I was searching the forum for some informations to understand why VLC doesn't show subtitles in fatdog 600 and saw your previous comment .
Looking back in fatdog 521 or LH64 5.14 (running in wine ) there are also no subtitles in VLC .
Are there any settings to fit or the issue is deeper
I don't know of any setting to turn on subtitles,pemasu has subtitles working in his vlc-2.0.1,I guess you already know that.
Dpup Exprimo 5.X.3.4.2.1 with 3.4.2 kernel.
I made a pet of cmus in exprimo, it is a music player.
To see the cmus documentation (while online) open the terminal and
enter:
man cmus
To see the cmus documentation (while online) open the terminal and
enter:
man cmus
- Attachments
-
- cmus-v2.4.3-i686.pet
- (162.66 KiB) Downloaded 204 times
-
- cmus.jpg
- (111.53 KiB) Downloaded 788 times
After a little sleep...a quick live pfix=ram test run. Sound and internet good on initial boot ..... still boots to a black display with "monitor out of range" message...easy fix though.
# report-video
Dpup Exprimo, version 5.X.3.4.2.2 on Fri 29 Jun 2012
Chip description:
d.0 VGA compatible controller
nVidia Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
oem: NVIDIA
product: MCP61 - mcp61-86 Chip Rev
X Server: Xorg
Driver used: nv
X.Org version: 1.7.7
dimensions: 1368x768 pixels (414x232 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
-Computer-
Processor : 4x AMD Athlon(tm) II X4 620 Processor
Memory : 2853MB (179MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Fri 29 Jun 2012 09:46:06 AM CDT
-Display-
Resolution : 1368x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : HDA-Intel - HDA NVidia
Will do an install or two a bit later.
# report-video
Dpup Exprimo, version 5.X.3.4.2.2 on Fri 29 Jun 2012
Chip description:
d.0 VGA compatible controller
nVidia Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
oem: NVIDIA
product: MCP61 - mcp61-86 Chip Rev
X Server: Xorg
Driver used: nv
X.Org version: 1.7.7
dimensions: 1368x768 pixels (414x232 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
-Computer-
Processor : 4x AMD Athlon(tm) II X4 620 Processor
Memory : 2853MB (179MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Fri 29 Jun 2012 09:46:06 AM CDT
-Display-
Resolution : 1368x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : HDA-Intel - HDA NVidia
Will do an install or two a bit later.
Thank's for answering , Biltoo . I'll try to look again at ' Pemasu ' 's posts and see if any idea comes to me...Billtoo wrote:I think kirk is going to recompile vlc for the next release of fatdog64-600, tell him about subtitles not working.Gobbi wrote: In my fatdog 600b1 I tried hard to make subtitles show on in VLC without any success...
I was searching the forum for some informations to understand why VLC doesn't show subtitles in fatdog 600 and saw your previous comment .
Looking back in fatdog 521 or LH64 5.14 (running in wine ) there are also no subtitles in VLC .
Are there any settings to fit or the issue is deeper
I don't know of any setting to turn on subtitles,pemasu has subtitles working in his vlc-2.0.1,I guess you already know that.
Thank you guys of initial reports of latest build. Broadcom users are wanted to report next, lol.
Billtoo. Cmus is in exprimo repo now
Gobbi. Including subtitles support is compile time process. It has been tricky in Puppy. I am stil not sure what are the needed steps. I just have now environment which enables it. When you compile VLC with subtitles support, you need more files to the /usr/lib/gconv directory. More character sets than Puppies created by woof includes. I dont even know what debian package installed them. When I have installed several packages and succeeded with subtitles...I just copied those character sets files and created a pet of them. What else it really needs...I am not sure of those mandatory steps.
Billtoo. Cmus is in exprimo repo now
Gobbi. Including subtitles support is compile time process. It has been tricky in Puppy. I am stil not sure what are the needed steps. I just have now environment which enables it. When you compile VLC with subtitles support, you need more files to the /usr/lib/gconv directory. More character sets than Puppies created by woof includes. I dont even know what debian package installed them. When I have installed several packages and succeeded with subtitles...I just copied those character sets files and created a pet of them. What else it really needs...I am not sure of those mandatory steps.
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi Pemasu,
again tons of thanks for this new exprimo 5x.4.3.2.2 !
Here some quick trials:
1- 5X4.3.2.1 looked to boot a bit faster (the step "recognizing optical devices" ..."or recognizing multimedia devices" was faster (a few sec ...!)
2- here klavaro asks for a missing libcurl-gnutls.so.4; whereas it did not on 5X4.3.2.1 ....?? i do not understand as i did not found libcurl-gnutls.so.4 on 5X4.3.2.1...?
3- updating from 5X4.3.2.1 an existing squeeze-save: GTick was running on it; now GTick claims /dev/dsp is missing ...! Grabbing in /dev ....and there is no longer /dev/dsp !???
Checked on a fresh 5X4.3.2.2: GTick runs like a charm and /dev/dsp is present.
Cheers!
again tons of thanks for this new exprimo 5x.4.3.2.2 !
Here some quick trials:
1- 5X4.3.2.1 looked to boot a bit faster (the step "recognizing optical devices" ..."or recognizing multimedia devices" was faster (a few sec ...!)
2- here klavaro asks for a missing libcurl-gnutls.so.4; whereas it did not on 5X4.3.2.1 ....?? i do not understand as i did not found libcurl-gnutls.so.4 on 5X4.3.2.1...?
3- updating from 5X4.3.2.1 an existing squeeze-save: GTick was running on it; now GTick claims /dev/dsp is missing ...! Grabbing in /dev ....and there is no longer /dev/dsp !???
Checked on a fresh 5X4.3.2.2: GTick runs like a charm and /dev/dsp is present.
Cheers!
Charlie6. Just copy from other Puppy that /dev/dsp and your savefile should work for that problem
About klavaro. I installed the version from squeeze repo and it does not ask about libcurl-gnutls.so.4.
Weird problem. I believe it is not caused by base distro but something in your installation.
Could you point me to the klavaro version you used. It would help me to inspect the problem.
About klavaro. I installed the version from squeeze repo and it does not ask about libcurl-gnutls.so.4.
Weird problem. I believe it is not caused by base distro but something in your installation.
Could you point me to the klavaro version you used. It would help me to inspect the problem.
Hi pemasu:
Broadcom user here. Actually you were the first to respond when I first encountered broadcom on my new laptop earlier this year.
Just now did a usb install.
wl driver identified and setup by following the few simple steps required.
Did have to use frisbee the others didn't work.
Downloaded chromium and by using sync I was connected and had bookmarks ready to go.
Downloaded the following .sfs:
libreoffice.sfs
jre.sfs
acroread.sfs.
Acroread not working showing an error. Will have to investigate further.
Downloaded vlc from the repro and from your link here on the forum.
Not working yet, may to have to look for help with these.
Very happy with progress so far, Congratulations on a great distro.
irishrm.
Broadcom user here. Actually you were the first to respond when I first encountered broadcom on my new laptop earlier this year.
Just now did a usb install.
wl driver identified and setup by following the few simple steps required.
Did have to use frisbee the others didn't work.
Downloaded chromium and by using sync I was connected and had bookmarks ready to go.
Downloaded the following .sfs:
libreoffice.sfs
jre.sfs
acroread.sfs.
Acroread not working showing an error. Will have to investigate further.
Downloaded vlc from the repro and from your link here on the forum.
Not working yet, may to have to look for help with these.
Very happy with progress so far, Congratulations on a great distro.
irishrm.
Irishrm. When you download vlc form repo, click check dependencies and then download and install them. You will need qt and vlc-deps-dpup pets to be installed also. PPM dependency checking takes care of them and notices the need and downloads all 3 pets.
Good to hear about wl and broadcom works. Yeah. I havent even tested SNS network tool. I have used solely Frisbee all the time, lol.
Good to hear about wl and broadcom works. Yeah. I havent even tested SNS network tool. I have used solely Frisbee all the time, lol.
Manual frugal install on the Athlon XP box......all looking good.
# report-video
Dpup Exprimo, version 5.X.3.4.2.2 on Fri 29 Jun 2012
Chip description:
0.0 VGA compatible controller
nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
oem: NVidia
product: NV18 () Board Chip Rev A2
X Server: Xorg
Driver used: is
X.Org version: 1.7.7
dimensions: 1440x900 pixels (411x263 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (267MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Fri 29 Jun 2012 03:07:21 PM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
# report-video
Dpup Exprimo, version 5.X.3.4.2.2 on Fri 29 Jun 2012
Chip description:
0.0 VGA compatible controller
nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
oem: NVidia
product: NV18 () Board Chip Rev A2
X Server: Xorg
Driver used: is
X.Org version: 1.7.7
dimensions: 1440x900 pixels (411x263 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (267MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Fri 29 Jun 2012 03:07:21 PM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
Compiling
Hi pemasu,
Q's about compiling.
I tried compiling for my USB DVB RTL2832U
but
this is my howto, could you look and see if theres anything different you might do?
these instructions have previously worked with 525,528,slacko etc.
thanks
DC
Q's about compiling.
I tried compiling for my USB DVB RTL2832U
but
Code: Select all
# last few lines of failure
make[4]: *** [drivers/media/dvb/dvb-usb/rtl2832u.o] Error 1
make[3]: *** [drivers/media/dvb/dvb-usb] Error 2
make[2]: *** [drivers/media/dvb] Error 2
make[1]: *** [drivers/media] Error 2
make: *** [drivers] Error 2
these instructions have previously worked with 525,528,slacko etc.
A final question about compiling can you use the same kernel headers for any puppy build, any kernel version or 64bit(Fatdog) etc?Compling a module for DVB - RTL2832U
Kernel source and devx required
cd /usr/src/linux-x.x.x.x/drivers/media/dvb/dvb-usb
## copy device kernel headers for RTL2832U
## add to Makefile (still in same dir)
dvb-usb-rtl2832u-objs = demod_rtl2832.o dvbt_demod_base.o dvbt_nim_base.o foundation.o math_mpi.o nim_rtl2832_mxl5007t.o nim_rtl2832_fc2580.o nim_rtl2832_mt2266.o rtl2832u.o rtl2832u_fe.o rtl2832u_io.o tuner_mxl5007t.o tuner_fc2580.o tuner_mt2266.o tuner_tua9001.o nim_rtl2832_tua9001.o tuner_fc0012.o nim_rtl2832_fc0012.o demod_rtl2836.o dtmb_demod_base.o dtmb_nim_base.o nim_rtl2836_fc2580.o nim_rtl2836_mxl5007t.o tuner_e4000.o nim_rtl2832_e4000.o
obj-$(CONFIG_DVB_USB_RTL2832U) += dvb-usb-rtl2832u.o
## add to kconfig
config DVB_USB_RTL2832U
tristate "Realtek RTL2832U DVB-T USB2.0 support"
depends on DVB_USB
help
Realtek RTL2832U DVB-T driver.
cd /usr/src/linux-x.x.xx.x
make menuconfig
## when GUI pops up go to
Device Drivers > Multimedia support > DVB/ATSC adapters
## highlight (press space bar to select)
Realtek RTL2832U DVB-T USB2.0 support (NEW)
## and press m
## exit exit exit yes to save
## Make command also creates the bzImage and makes the modules without extra commands.
make bzImage ## this compiles the kernel image why ? who knows
make modules ## takes time enough for tea
make modules_install
depmod-FULL
copy dvb-usb.ko dvb-usb-rtl2832u.ko
from
/lib/modules/<kernelversion>/
to
cd /lib/modules/2.6.33.2/kernel/drivers/media/dvb/dvb-usb/
depmod-FULL # to activate
testing
dmesg | grep dvb
thanks
DC
a little bit of knowledge and I'm dangerous
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi Pemasu,
1- tried forum member muggins pets with versiob 1.3.4 and the later 1.9.4 from debian (maybe from debian wheezy)
(download link is http://ftp.us.debian.org/debian/pool/ma ... 1_i386.deb )
2- tried klavaro_1.5.0-1_i386.deb from squeeze debian repo;
b. afterwards on a fresh 5X4.3.2.1, I repeated the same klavaro install.
both case returns:
note: mentioned in debian repo, whatever squeeze or wheezy version, libcurl-gnutls is listed in the dependencies
OK ! I was wondering if the squeezesave update operation would need enough partition memory capacity where it is located ...as there was ca. 100MB left on it (i remember a previous post where problems here were due to run out of memory...)pemasu wrote:Charlie6. Just copy from other Puppy that /dev/dsp ...
a. On a fresh 5X4.3.2.2, I havepemasu wrote:...About klavaro. I installed the version from squeeze repo and it does not ask about libcurl-gnutls.so.4.
Weird problem. I believe it is not caused by base distro but something in your installation.
Could you point me to the klavaro version you used. It would help me to inspect the problem.
1- tried forum member muggins pets with versiob 1.3.4 and the later 1.9.4 from debian (maybe from debian wheezy)
(download link is http://ftp.us.debian.org/debian/pool/ma ... 1_i386.deb )
2- tried klavaro_1.5.0-1_i386.deb from squeeze debian repo;
b. afterwards on a fresh 5X4.3.2.1, I repeated the same klavaro install.
both case returns:
Code: Select all
# klavaro
klavaro: error while loading shared libraries: libgtkdatabox-0.9.1.so.1: cannot open shared object file: No such file or directory
<----here have installed libgtkdatabox-0.9.1 ---->
# klavaro
klavaro: error while loading shared libraries: libcurl-gnutls.so.4: cannot open shared object file: No such file or directory
# klavaro --version
klavaro: error while loading shared libraries: libcurl-gnutls.so.4: cannot open shared object file: No such file or directory
#
cheers !from debian repo.... wrote:dep: libcurl3-gnutls (>= 7.16.2-1)
Multi-protocol file transfer library (GnuTLS)
The idea that VLC had too few character sets avaiable , crossed my mind , too ,,,pemasu wrote:
Gobbi. Including subtitles support is compile time process. It has been tricky in Puppy. I am stil not sure what are the needed steps. I just have now environment which enables it. When you compile VLC with subtitles support, you need more files to the /usr/lib/gconv directory. More character sets than Puppies created by woof includes. I dont even know what debian package installed them. When I have installed several packages and succeeded with subtitles...I just copied those character sets files and created a pet of them. What else it really needs...I am not sure of those mandatory steps.
Thank you pemasu for the details
DC. Kernel 3.4.2 has initial support for your stick....in /lib/modules/3.4.2-dpup/kernel/drivers/media/dvb/dvb-usb/dvb-usb-rtl28xxu.ko
Have you plugged in your stick and tested. And check the dmesg in console after that. Or try modprobe dvb-usb-rtl28xxu and test again.
I couldnt find recent patch for your stick.
/usr/src/linux/drivers/media/dvb/dvb-usb/rtl28xxu.c mentions rtl2832u several times.
If that support does not work for you, I could try to hunt recent ready patch for 3.4.2 kernel.
About kernel headers. They are included in devx sfs in Puppies. In dpups also. When you compile kernel modules...I would recommend to use devx sfs of the build. The other devx sfs usually works for applications. I mean same puplet but older kernel version usually works. Debian packages their kernel totally differently than Puppies. So...the ready kernel patching kits from debian ubuntu or squeeze does not work.
Charlie6. Yeah...it seems to need that libcurl-gnutls.so.4. libcurl3-gnutls deb from PPM debian squeeze repo installs that lib. I must have had that lib due to my compiling already.
Have you plugged in your stick and tested. And check the dmesg in console after that. Or try modprobe dvb-usb-rtl28xxu and test again.
I couldnt find recent patch for your stick.
/usr/src/linux/drivers/media/dvb/dvb-usb/rtl28xxu.c mentions rtl2832u several times.
If that support does not work for you, I could try to hunt recent ready patch for 3.4.2 kernel.
About kernel headers. They are included in devx sfs in Puppies. In dpups also. When you compile kernel modules...I would recommend to use devx sfs of the build. The other devx sfs usually works for applications. I mean same puplet but older kernel version usually works. Debian packages their kernel totally differently than Puppies. So...the ready kernel patching kits from debian ubuntu or squeeze does not work.
Charlie6. Yeah...it seems to need that libcurl-gnutls.so.4. libcurl3-gnutls deb from PPM debian squeeze repo installs that lib. I must have had that lib due to my compiling already.
RTL2832U
Hi pemasu,
RTL2832U Not working. Here's the results
As a benchmark, puppy 528 which uses the module I compiled
#Twinhan
dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
dvb-usb: will use the device's hardware PID filter (table count: 16).
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected.
#Sandberg
dvb-usb: found a 'RTL2832U DVB-T USB DEVICE' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: RTL2832U DVB-T USB DEVICE successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_rtl2832u
#squeeze-5_X_3_4_2_1-SCSI results
# modprobe dvb-usb-rtl28xxu
# dmesg | grep dvb
[ 496.418342] usbcore: registered new interface driver dvb_usb_rtl28xxu
#Sandberg
unplug and replug RTL2832U - no reaction at all
# Twinhan
[ 663.068566] dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in cold state, will try to load a firmware
[ 663.071792] dvb-usb: downloading firmware from file 'dvb-usb-dibusb-5.0.0.11.fw'
[ 664.064746] usbcore: registered new interface driver dvb_usb_dibusb_mb
[ 664.066565] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
[ 666.220826] dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
[ 666.239425] dvb-usb: will use the device's hardware PID filter (table count: 16).
[ 666.287783] dvb-usb: schedule remote query interval to 150 msecs.
[ 666.302608] dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected.
Whats the criteria for finding kernel headers /patches. As I want to get this usb-dvb working under Fatdog as well.
One other point relating to sqeeze trying to resize windows you have to be very accurate with your mouse pointer. Is there a setting to make the grab area wider/thicker?
thanks
DC
RTL2832U Not working. Here's the results
As a benchmark, puppy 528 which uses the module I compiled
#Twinhan
dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
dvb-usb: will use the device's hardware PID filter (table count: 16).
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected.
#Sandberg
dvb-usb: found a 'RTL2832U DVB-T USB DEVICE' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: RTL2832U DVB-T USB DEVICE successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_rtl2832u
#squeeze-5_X_3_4_2_1-SCSI results
# modprobe dvb-usb-rtl28xxu
# dmesg | grep dvb
[ 496.418342] usbcore: registered new interface driver dvb_usb_rtl28xxu
#Sandberg
unplug and replug RTL2832U - no reaction at all
# Twinhan
[ 663.068566] dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in cold state, will try to load a firmware
[ 663.071792] dvb-usb: downloading firmware from file 'dvb-usb-dibusb-5.0.0.11.fw'
[ 664.064746] usbcore: registered new interface driver dvb_usb_dibusb_mb
[ 664.066565] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
[ 666.220826] dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
[ 666.239425] dvb-usb: will use the device's hardware PID filter (table count: 16).
[ 666.287783] dvb-usb: schedule remote query interval to 150 msecs.
[ 666.302608] dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected.
Whats the criteria for finding kernel headers /patches. As I want to get this usb-dvb working under Fatdog as well.
One other point relating to sqeeze trying to resize windows you have to be very accurate with your mouse pointer. Is there a setting to make the grab area wider/thicker?
thanks
DC
a little bit of knowledge and I'm dangerous
I have compiled mscore-1.2. It needs qt libs from exprimo repo also.
http://musescore.org/
http://smokey01.com/pemasu/pet_packages ... re-1.2.pet
http://smokey01.com/pemasu/pet_packages ... LS-1.2.pet
http://smokey01.com/pemasu/pet_packages ... OC-1.2.pet
I have also packaged Adobe Acrobat reader-9.5.1 and FoxitReader-1.1
http://smokey01.com/pemasu/pet_packages ... -9.5.1.pet
http://smokey01.com/pemasu/pet_packages ... -9.5.1.sfs
http://smokey01.com/pemasu/pet_packages ... 1-dpup.pet
http://musescore.org/
http://smokey01.com/pemasu/pet_packages ... re-1.2.pet
http://smokey01.com/pemasu/pet_packages ... LS-1.2.pet
http://smokey01.com/pemasu/pet_packages ... OC-1.2.pet
I have also packaged Adobe Acrobat reader-9.5.1 and FoxitReader-1.1
http://smokey01.com/pemasu/pet_packages ... -9.5.1.pet
http://smokey01.com/pemasu/pet_packages ... -9.5.1.sfs
http://smokey01.com/pemasu/pet_packages ... 1-dpup.pet
DC. I am checking the rtl2832u patches.
About JWM window thichkness. Yeah...I have reduced it to too narrow. In /root/.jwm/themes....check the jwmrc files of the themes. In there is the tag: <Width>3</Width>
Change it for example to whatever number you want. From 1 or 3 to 5 or 8. From 8 the resizing by dragging is easy, lol.
About JWM window thichkness. Yeah...I have reduced it to too narrow. In /root/.jwm/themes....check the jwmrc files of the themes. In there is the tag: <Width>3</Width>
Change it for example to whatever number you want. From 1 or 3 to 5 or 8. From 8 the resizing by dragging is easy, lol.
- OscarTalks
- Posts: 2196
- Joined: Mon 06 Feb 2012, 00:58
- Location: London, England
Hello Pemasu / Billtoo / Anyone else,
I would be curious to know if this video stream plays in your new VLC 2.0.1
http://173.193.48.140:8080;stream.nsv
It is just the one from the button "Shoutcast Movie" in Pupradio/Puptelly but it is in fact "Old Fashioned TV".
I have found that in some VLC versions in Puppy I get video but no audio and I was wondering if this is something in the way it was compiled or if it is something which needs to be altered in the (rather large) preferences like a demuxer setting perhaps?
I would be curious to know if this video stream plays in your new VLC 2.0.1
http://173.193.48.140:8080;stream.nsv
It is just the one from the button "Shoutcast Movie" in Pupradio/Puptelly but it is in fact "Old Fashioned TV".
I have found that in some VLC versions in Puppy I get video but no audio and I was wondering if this is something in the way it was compiled or if it is something which needs to be altered in the (rather large) preferences like a demuxer setting perhaps?
Oscar in England