Slacko 5.3.3 bug reports and feedback
- mikeybaby72
- Posts: 27
- Joined: Wed 10 Sep 2008, 12:52
- Location: Sheffield, UK
- Contact:
Update from Slacko 5.3.1
I tried the live cd and love this release, but when I upgraded the savefile on my Acer 5315 from 5.3.1 to 5.3.3 and manually installed the rest of the files for HDD (frugal) - upon 2nd reboot PPM had died? I click on PPM and I just get a yellow text spash that is far too quick to read and then...nothing? Have tried doing 'simulated upgrade' at bootup but problem still persists.
Help! I have important data in my savefile, so can't just kill it and start again.
Otherwise = fantastic release!
PS. Can't seem to find anyone else who's had this problem and IRC channel is dead(?)
Help! I have important data in my savefile, so can't just kill it and start again.
Otherwise = fantastic release!
PS. Can't seem to find anyone else who's had this problem and IRC channel is dead(?)
Adopt a Puppy TODAY - they are Man's best friend! :D
Currently researching "Linux on Android project" - wanting to compile a Puppy to run in my hand on my Droid ... This has always been a dream of mine. ;-)
Currently researching "Linux on Android project" - wanting to compile a Puppy to run in my hand on my Droid ... This has always been a dream of mine. ;-)
mikeybaby72,
How did you do the save file upgrade?
Be specific what you did.
Type ppm
Hit enter.
What errors do you see?
How did you do the save file upgrade?
Be specific what you did.
In the consoleI click on PPM and I just get a yellow text spash that is far too quick to read and then...nothing?
Type ppm
Hit enter.
What errors do you see?
Can you not see any of these files in Rox file manager?Help! I have important data in my savefile, so can't just kill it and start again.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
There is a bug with PPM, see the first post for a link to the fix.
Puppy Linux Blog - contact me for access
- mikeybaby72
- Posts: 27
- Joined: Wed 10 Sep 2008, 12:52
- Location: Sheffield, UK
- Contact:
Sorry bigpup - I will be more specific in future (I wrote that post in a bit of a panic) normal reasoning has been resumed!bigpup wrote:mikeybaby72,
How did you do the save file upgrade?
Be specific what you did.In the consoleI click on PPM and I just get a yellow text spash that is far too quick to read and then...nothing?
Type ppm
Hit enter.
What errors do you see?Can you not see any of these files in Rox file manager?Help! I have important data in my savefile, so can't just kill it and start again.
My upgrade process went as follows - I booted the live CD to give it a test run on that machine, everything went fine and I was very impressed. So I rebooted 5.3.3 cd into pupmode 05 so as not to mount the 5.3.1 savefile on my hdd - then copied the kernel image, initrd.gz files and then moved the old puppy_slacko_5.3.1.sfs file to a backup and copied the new puppy_slacko_5.3.3.sfs file into hdd in frugal Slacko directory, then I changed the menu.lst file in my hdd GRUB install and then just renamed the sub directory in root of my 'kennels' partition.
Then just shutdown without saving and ejected cd, then rebooted into slacko (5.3.3) and run the upgrade from boot prompt. EVERYTHING worked fine, EVEN ppm UNTIL I clicked Update PPM in Slickpet - then next time I clicked on PPM I had the above error in last post(?) I tried re-booting - still same problem, tried re-updating PPM - still same problem. I tried everything I could think of = nothing - same problem.
Thanks for your help - I found your reply this morning on my Droid so couldn't get my hands on 5315 to boot puppy and run the terminal. I have just fixed it using 01micko's patch - sorry for not being able to post results from terminal.
Thanks to 01micko for one of the best pups yet!
PS. I couldn't find my personal files in the backup of my original savefile - but have now restored and run the patch and everything is there
I have 7 puppies/puplets frugally installed on that laptop and Mint DE as well as two 'other' OSs (both are M$) and I've not had any problems with doing manual upgrades before.
I guess that although I've been using puppy since v3.1 - I STILL have a lot to learn about keeping dogs!
----------------
Now playing: Progressive Full On Goa Trance Mix 2 2012 - YouTube
via FoxyTunes
Adopt a Puppy TODAY - they are Man's best friend! :D
Currently researching "Linux on Android project" - wanting to compile a Puppy to run in my hand on my Droid ... This has always been a dream of mine. ;-)
Currently researching "Linux on Android project" - wanting to compile a Puppy to run in my hand on my Droid ... This has always been a dream of mine. ;-)
I have made available 2 reasonably critical updates
1) aufs-utils, bugfix, : bug - fail to mount a directory as a branch
2) seamonkey-2.10.1-slacko, latest release, see the release notes (compiled in Slacko)
Both available in the main post
1) aufs-utils, bugfix, : bug - fail to mount a directory as a branch
2) seamonkey-2.10.1-slacko, latest release, see the release notes (compiled in Slacko)
Both available in the main post
Puppy Linux Blog - contact me for access
I installed this pet in fatslacko and now games work, nexuiz,sauerbraten, etc, think I'll try it in racy and a few others.01micko wrote:I have made available 2 reasonably critical updates
1) aufs-utils, bugfix, : bug - fail to mount a directory as a branch
EDIT: I guess games were working all along in fatslacko, I installed the pet in slacko 533 and it didn't fix openarena, but sauerbraten works, don't think it did before.
Last edited by Billtoo on Sun 24 Jun 2012, 14:26, edited 1 time in total.
Whiff in the air
01micko
Spotted in the Slacko kennel today. Is there something afoot ?
Spotted in the Slacko kennel today. Is there something afoot ?
- Attachments
-
- screenshot.48.png
- (1.66 KiB) Downloaded 1253 times
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
Re: Whiff in the air
um... .. maybeETP wrote:01micko
Spotted in the Slacko kennel today. Is there something afoot ?
Puppy Linux Blog - contact me for access
That would indicate your card (or game) requires Mesa. Install that before the proprietary driver.Billtoo wrote: EDIT: I guess games were working all along in fatslacko, I installed the pet in slacko 533 and it didn't fix openarena, but sauerbraten works, don't think it did before.
Puppy Linux Blog - contact me for access
When shutting down or rebooting slacko 5.3.3 after first boot it hangs at "Putty linux is shutting down..." and i have to use the powerbutton to power off.
This happens both when saving and not saving to usb, or even using a liveCD. When saving to usb the saved filesystem i ruined when trying to boot again.
I've tried both the 4g and highmem iso, but no difference.
Computer specs:
Processor: IntelCore i7-2670QM @ 2.20GHz
Memory: 8GB
Graphic: Gforce GTX 560M
Wifi: Atheros Ar9300 Driver: ath9k
USB: 2GB
SOLVED using puppy acpi=off
This happens both when saving and not saving to usb, or even using a liveCD. When saving to usb the saved filesystem i ruined when trying to boot again.
I've tried both the 4g and highmem iso, but no difference.
Computer specs:
Processor: IntelCore i7-2670QM @ 2.20GHz
Memory: 8GB
Graphic: Gforce GTX 560M
Wifi: Atheros Ar9300 Driver: ath9k
USB: 2GB
SOLVED using puppy acpi=off
Last edited by mikkelart on Mon 16 Jul 2012, 15:27, edited 1 time in total.
Not letting me make the choice to save
I'm booting a vanilla slacko 5.33 frugal install off a usb stick. When I shut down, I'm not given the choice to save back to usb stick. Apparently it just saves without any input from me because changes do persist across a reboot. When I reboot I get an window that says x was not shut down properly and choices to ignore or go to the command line. Any ideas?
How did you do the install to USB stick?
That is normal operation after making the save file and rebooting.When I shut down, I'm not given the choice to save back to usb stick. Apparently it just saves without any input from me because changes do persist across a reboot.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Try this just to see if it has an affect.mikkelart wrote:When shutting down or rebooting slacko 5.3.3 after first boot it hangs at "Putty linux is shutting down..." and i have to use the powerbutton to power off.
This happens both when saving and not saving to usb, or even using a liveCD. When saving to usb the saved filesystem i ruined when trying to boot again.
I've tried both the 4g and highmem iso, but no difference.
Computer specs:
Processor: IntelCore i7-2670QM @ 2.20GHz
Memory: 8GB
Graphic: Gforce GTX 560M
Wifi: Atheros Ar9300 Driver: ath9k
USB: 2GB
Boot with the Slacko live CD.
Use boot option puppy acpi=off
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
-
- Posts: 147
- Joined: Sun 20 Dec 2009, 20:41
Mesa driver won't install on Slacko PAE
Just did a full install of Slacko 533 on a brand-new i3 system with 8GB RAM, so I used the PAE kernel. Slickpet recommended the mesa driver and downloaded it but it simply won't install. Just a guess, the driver needs to be compiled in this kernel? I'm not sure my abilities are up to it. Volunteers?
Re: Mesa driver won't install on Slacko PAE
Mesa is not kernel dependent.kevin bowers wrote:Just did a full install of Slacko 533 on a brand-new i3 system with 8GB RAM, so I used the PAE kernel. Slickpet recommended the mesa driver and downloaded it but it simply won't install. Just a guess, the driver needs to be compiled in this kernel? I'm not sure my abilities are up to it. Volunteers?
I first learned of mesa not installing a couple of weeks ago. Unfortunately I haven't been able to upload to ibiblio for a couple of weeks, ok now though so I am re-uploading mesa. It's the same package but there must have been some corruption in the original upload. I just tested the package on a new install and it works.
Please try again soon, (wait a bit for the mirrors).
Puppy Linux Blog - contact me for access
Slacko 5.3.3 bug reports and feedback
just installed. rebooted and puppy manager won't start.
-
- Posts: 147
- Joined: Sun 20 Dec 2009, 20:41
Re: Mesa driver won't install on Slacko PAE
Downloaded & installed without problems. Thanks!01micko wrote:Mesa is not kernel dependent.kevin bowers wrote:Just did a full install of Slacko 533 on a brand-new i3 system with 8GB RAM, so I used the PAE kernel. Slickpet recommended the mesa driver and downloaded it but it simply won't install. Just a guess, the driver needs to be compiled in this kernel? I'm not sure my abilities are up to it. Volunteers?
I first learned of mesa not installing a couple of weeks ago. Unfortunately I haven't been able to upload to ibiblio for a couple of weeks, ok now though so I am re-uploading mesa. It's the same package but there must have been some corruption in the original upload. I just tested the package on a new install and it works.
Please try again soon, (wait a bit for the mirrors).
puppy clock
Puppy clock in slacko
http://www.murga-linux.com/puppy/viewtopic.php?t=73168
I tested new version of puppy clock in slacko and
it works well
_________________
http://www.murga-linux.com/puppy/viewtopic.php?t=73168
I tested new version of puppy clock in slacko and
it works well
_________________
-
- Posts: 147
- Joined: Sun 20 Dec 2009, 20:41
WinTV card working in Slacko
With a lot of help I've gotten GMPlayer to play live TV under Slacko. You need:
--supported TV tuner card (mine is Hauppauge WinTV1850)
--dotpet from http://dotpups.de/dotpups/Multimedia/Mp ... -1.1.1.pet
--Wouldn't hurt to read Paulski's post where I got most of this: http://www.murga-linux.com/puppy/viewtopic.php?t=36672
Install the .pet, then go to /root/my-applications and read the readmes. Open a terminal there, and depending on where you are and what hardware you have, scan your channels. In the US:. This will create channels.conf in the same directory; copy that to /root/.mplayer (note: this does not exist until GMPlayer has been run and shut down once). At this point (and after installing the .pet) I rebooted; don't know if it was necessary, but it didn't hurt anything. Open GMPlayer (desktop "play" icon), click file>TV>open digital TV. The >| and |< buttons change channels, or view>playlist and double-click the channel you want. Happy couch-potato-ing!
Edit: After hooking up to a good antenna and re-scanning, GMPlayer started crashing. I had too many channels! Opened channels.conf as text and pruned several lines (channels I didn't want), that fixed it. Does GMPlayer have a limit on size of playlist, around 35 or 40 items?
--supported TV tuner card (mine is Hauppauge WinTV1850)
--dotpet from http://dotpups.de/dotpups/Multimedia/Mp ... -1.1.1.pet
--Wouldn't hurt to read Paulski's post where I got most of this: http://www.murga-linux.com/puppy/viewtopic.php?t=36672
Install the .pet, then go to /root/my-applications and read the readmes. Open a terminal there, and depending on where you are and what hardware you have, scan your channels. In the US:
Code: Select all
scan us-ATSC-center-frequencies-8VSB | tee channels.conf
Edit: After hooking up to a good antenna and re-scanning, GMPlayer started crashing. I had too many channels! Opened channels.conf as text and pruned several lines (channels I didn't want), that fixed it. Does GMPlayer have a limit on size of playlist, around 35 or 40 items?
Re: Slacko 5.3.3 bug reports and feedback
I assume you are talking about Puppy Package Manager?ryanvade wrote:just installed. rebooted and puppy manager won't start.
Install this bug fix.
Slacko 5.3.3 PPM bug fix
http://www.murga-linux.com/puppy/viewto ... 479#626479
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)