Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Sun 23 Nov 2014, 07:23
All times are UTC - 4
 Forum index » House Training » HOWTO ( Solutions )
How to set up a Wacom Tablet
Moderators: Flash, Ian, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 17 of 24 [349 Posts]   Goto page: Previous 1, 2, 3, ..., 15, 16, 17, 18, 19, ..., 22, 23, 24 Next
Author Message
charlie6


Joined: 30 Jun 2008
Posts: 1020
Location: South of Belgium

PostPosted: Fri 13 Apr 2012, 14:51    Post subject:  

Hi,
@don570
@argolance
bonjour !

To compile the xf86-input-wacom driver, I just only used don570's tuto (see page 14 this thread as don570 do in his above post), no more, no less ! Again, thanks don570 for it !

So, as told in the old linux-wacom-project website from kernel later than 2.6.35, and X server from version 1.7, only the xf86-input-wacom driver needs to be compiled.

This is more simpler than compiling the kernel driver (need to install the kernel source, and maybe headers, and better to have a full install ...).

To comment don570's tutorial, the 3rd step «make install DESTDIR=/root/name_of_the_pet» is needed to get populated the /root/name_of_the_pet directory.
I tried the «new2dir make install» instead ... and got nothing to make a pet !

Now I just went to install latest dpup-exprimo-3.2.14 using an existing squeeze-save-3.2.x.11 (kernel 3.2.11) whom I had installed on the xf86-input-wacom-k3.2.11. Surprisingly, I also got the wacom tablet working (pressure sensitivity) despite the kernel upgrade !

Hope this helps
Charlie
ps: I now need to do some cleaning work on my PCs hdds. No more room indeed to install new isos, and do some compiling work.
Back to top
View user's profile Send private message 
TTW

Joined: 28 Mar 2012
Posts: 27

PostPosted: Fri 13 Apr 2012, 17:39    Post subject: Saluki  

don570 wrote:
Saluki uses kernel 3.2.13 ???



I'll try to do this and report back on Saturday.

____________________________________________________




According to the Hardware information manager I am using Kernel 3.2.8-ski(i686)

I tried to follow the rest of your post but its way above my computing level Sad

D
Back to top
View user's profile Send private message 
jemimah


Joined: 26 Aug 2009
Posts: 4309
Location: Tampa, FL

PostPosted: Fri 13 Apr 2012, 17:50    Post subject:  

saluki has the drivers. You just need to figure out how to configure them
Back to top
View user's profile Send private message Visit poster's website 
Argolance


Joined: 06 Jan 2008
Posts: 1846
Location: PORT-BRILLET (Mayenne - France)

PostPosted: Sat 14 Apr 2012, 09:38    Post subject:  

hello,
Thank you for replying! I just discover your posts but tried to solve the problem by myself in between...
Quote:
To compile the xf86-input-wacom driver, I just only used don570's tuto (see page 14 this thread as don570 do in his above post), no more, no less ! Again, thanks don570 for it !
So did I first:(following don570 tutorial) no success!
Quote:
This is more simpler than compiling the kernel driver (need to install the kernel source, and maybe headers, and better to have a full install ...).
Tried after all: Downloaded devx/kernel source sfs from bk and files from sourceforge (input and xf86 tarbals). Compiled (no error message: Very Happy)... modified xorg.conf and restarted computer: Sad.
xerrs.log is always displaying the same error message:
Quote:
(EE) Failed to load /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: undefined symbol: xf86GetMotionEvents
(EE) LoadModule: Module wacom does not have a wacomModuleData data object.
(EE) Failed to load module "wacom" (invalid module, 0)
(EE) No input driver matching `wacom'
(EE) Failed to load /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: undefined symbol: xf86GetMotionEvents
(EE) LoadModule: Module wacom does not have a wacomModuleData data object.
(EE) Failed to load module "wacom" (invalid module, 0)
(EE) No input driver matching `wacom'

Something else: inside the xf86-input-k.3.2.11-wacom-0.14.0/pinstall.sh, line 3: lsmod | grep -qw wacom && rmmod wakom? wakom with "k" seems to be wrong!

Cordialement.

_________________


Last edited by Argolance on Sat 14 Apr 2012, 12:20; edited 1 time in total
Back to top
View user's profile Send private message Visit poster's website 
don570


Joined: 10 Mar 2010
Posts: 3379
Location: Ontario

PostPosted: Sat 14 Apr 2012, 11:28    Post subject: devx file for saluki  

Quote:
wacom spellt with a 'k".


I noticed that too but I didn't complain to
sinobar since the message displays anyway.

I forgot to download the devx file for saluki Embarassed

I'll try to make a pet package, but no guarantees.

_______________________________________________
Back to top
View user's profile Send private message 
pemasu


Joined: 08 Jul 2009
Posts: 5465
Location: Finland

PostPosted: Sat 14 Apr 2012, 12:20    Post subject:  

Quote:
lsmod | grep -qw wacom && rmmod wacom


When I did upload the dpup drivers...I did change the row as this...there isnt kernel module driver called wakom...I am pretty sure it is typso...
Back to top
View user's profile Send private message 
don570


Joined: 10 Mar 2010
Posts: 3379
Location: Ontario

PostPosted: Wed 18 Apr 2012, 19:17    Post subject:  

I couldn't get Saluki to compile a wacom driver.

It doesn't surprise me since I don't have much experience compiling.

_______________________________________________
Back to top
View user's profile Send private message 
charlie6


Joined: 30 Jun 2008
Posts: 1020
Location: South of Belgium

PostPosted: Sat 05 May 2012, 09:39    Post subject:
Subject description: xf86-input_k3.2.14-dpup-0.14.0 for dpup-Exprimo 5X3.2.14
 

Hi,
here is
xf86-input_k3.2.14-dpup-0.14.0.pet for dpup-Exprimo 5X3.2.14
(same structure as the one in pemasu's exprimo pets dpup-exprimo repo; also the pinstall.sh typo wakom has been fixed )

Enjoy !
Charlie
xf86-input-wacom_k3.2.14-dpup-0.14.0.pet
Description 
pet

 Download 
Filename  xf86-input-wacom_k3.2.14-dpup-0.14.0.pet 
Filesize  236.4 KB 
Downloaded  422 Time(s) 
Back to top
View user's profile Send private message 
Argolance


Joined: 06 Jan 2008
Posts: 1846
Location: PORT-BRILLET (Mayenne - France)

PostPosted: Sat 09 Jun 2012, 07:26    Post subject:  

Hello,
Did someone succeed in making the usb graphire3 wacom tablet (or any other?) run under Puppy Racy 5.3?
Tried all what I could... But probably forgot something?

Quote:
# grep -i wacom /var/log/Xorg.0.log
[ 2072.536] (II) LoadModule: "wacom"
[ 2072.536] (II) Loading /usr/X11R7/lib/xorg/modules/input/wacom_drv.so
[ 2072.536] (EE) Failed to load /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: undefined symbol: xf86GetMotionEvents
[ 2072.536] (EE) LoadModule: Module wacom does not have a wacomModuleData data object.
[ 2072.536] (II) UnloadModule: "wacom"
[ 2072.536] (II) Unloading wacom
[ 2072.536] (EE) Failed to load module "wacom" (invalid module, 0)
[ 2072.539] (II) LoadModule: "wacom"
[ 2072.539] (II) Loading /usr/X11R7/lib/xorg/modules/input/wacom_drv.so
[ 2072.539] (EE) Failed to load /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: undefined symbol: xf86GetMotionEvents
[ 2072.539] (EE) LoadModule: Module wacom does not have a wacomModuleData data object.
[ 2072.539] (II) UnloadModule: "wacom"
[ 2072.539] (II) Unloading wacom
[ 2072.539] (EE) Failed to load module "wacom" (invalid module, 0)
[ 2074.866] (II) LoadModule: "wacom"
[ 2074.866] (II) Loading /usr/X11R7/lib/xorg/modules/input/wacom_drv.so
[ 2074.866] (EE) Failed to load /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: undefined symbol: xf86GetMotionEvents
[ 2074.866] (EE) LoadModule: Module wacom does not have a wacomModuleData data object.
[ 2074.866] (II) UnloadModule: "wacom"
[ 2074.866] (II) Unloading wacom
[ 2074.866] (EE) Failed to load module "wacom" (invalid module, 0)
[ 2074.866] (EE) No input driver matching `wacom'
[ 2074.866] (II) LoadModule: "wacom"
[ 2074.866] (II) Loading /usr/X11R7/lib/xorg/modules/input/wacom_drv.so
[ 2074.867] (EE) Failed to load /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: undefined symbol: xf86GetMotionEvents
[ 2074.867] (EE) LoadModule: Module wacom does not have a wacomModuleData data object.
[ 2074.867] (II) UnloadModule: "wacom"
[ 2074.867] (II) Unloading wacom
[ 2074.867] (EE) Failed to load module "wacom" (invalid module, 0)
[ 2074.867] (EE) No input driver matching `wacom'
[ 2074.867] (II) LoadModule: "wacom"
[ 2074.867] (II) Loading /usr/X11R7/lib/xorg/modules/input/wacom_drv.so
[ 2074.867] (EE) Failed to load /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: /usr/X11R7/lib/xorg/modules/input/wacom_drv.so: undefined symbol: xf86GetMotionEvents
[ 2074.867] (EE) LoadModule: Module wacom does not have a wacomModuleData data object.
[ 2074.867] (II) UnloadModule: "wacom"
[ 2074.867] (II) Unloading wacom
[ 2074.867] (EE) Failed to load module "wacom" (invalid module, 0)
[ 2074.867] (EE) No input driver matching `wacom'

Quote:
#Special base config file used in Puppy Linux.

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
# Load "type1"
# Load "freetype"

# This loads xtrap extension, used by xrandr
Load "xtrap"

# This loads the GLX module (if present). xorg 7.4/5, need explicit disable to disable...
Load "glx" #LOADGLX

# This loads dri module (if present). 7.4 loads it by default, have to disable...
Load "dri" #LOADDRI
# Disable "dri"
Load "wacom"

EndSection

# **********************************************************************
# Files section. This allows default font paths to be set
# **********************************************************************

Section "Files"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

FontPath "/usr/share/X11/fonts/misc/"
FontPath "/usr/share/X11/fonts/Type1/"
FontPath "/usr/share/X11/fonts/TTF/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...

Option "RandR" "on"

# With this, Xorg won't talk to HAL to add evdev devices and you'll be back
# with the old Xorg behavior (pre-7.4)...

Option "AutoAddDevices" "false"

# For no-Hal, kirk also suggests this...

# Option "AllowMouseOpenFail" "true"

# Xorg 7.4, Ubuntu Jaunty, CTRL-ALT-BACKSPACE is disabled by default...

Option "DontZap" "false"

EndSection

#everything past here is auto-generated by Puppy's Xorg Wizard...


Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "stylus"
InputDevice "eraser"
InputDevice "cursor"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "fr" #xkeymap0
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "USB" "on"
Option "Mode" "Absolute"
Option "AlwaysCore" "on"
Option "Speed" "1.3"
Option "Threshold" "5"
Option "CursorProx" "5"
# Option "Speed" "5"
# # Option "ForceDevice" "ISDV4" # Serial Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "USB" "on"
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "USB" "on"
# Option "CursorProx" "100"
Option "Speed" "1.3"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-74
VertRefresh 50-61
#UseModes "Modes0" #monitor0usemodes
Option "PreferredMode" "1920x1200"
EndSection

Section "Modes"
Identifier "Modes0"
#modes0modeline0
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
Identifier "Card0"
Driver "nvidia" #card0driver
BusID "PCI:5:0:0"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
#Option "NoDDC" # [<bool>]
Identifier "Card1"
Driver "vesa"
BusID "PCI:5:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
#Option "metamodes" "1920x1200_60 +0+0" #METAMODES_0
Subsection "Display"
Depth 24
Modes "1920x1200"
EndSubsection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
#Option "metamodes" "1920x1200_60 +0+0" #METAMODES_1
Subsection "Display"
Depth 24
Modes "1920x1200"
EndSubsection
EndSection

#PuppyHardwareProfile=NVIDIAMB24W

Thank you a lot.
Cordialement.
Back to top
View user's profile Send private message Visit poster's website 
don570


Joined: 10 Mar 2010
Posts: 3379
Location: Ontario

PostPosted: Sat 09 Jun 2012, 13:27    Post subject:  

I am Bamboo user.

For what it's worth I use a different xorg.conf than yours....

For instance my server layout is
Code:

Section "ServerLayout"
    # For non-LCD tablets only
    # Only a few TabletPCs support this type
   # For Intuos3/CintiqV5/Graphire4/Bamboo tablets
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "touch" "SendCoreEvents"
    InputDevice    "pad"


and for my devices

Code:


Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"    # USB ONLY
    Option         "Type" "stylus"
    Option         "USB" "on"                  # USB ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"    # USB ONLY
    Option         "Type" "eraser"
    Option         "USB" "on"                  # USB ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"    # USB ONLY
    Option         "Type" "cursor"
    Option         "USB" "on"                  # USB ONLY
EndSection

Section "InputDevice"
    Identifier     "pad"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"    # USB ONLY
    Option         "Type" "pad"
    Option         "USB" "on"                  # USB ONLY
EndSection

Section "InputDevice"
    Identifier     "touch"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"    # USB ONLY
    Option         "Type" "touch"
    Option         "USB" "on"                  # USB ONLY
EndSection


_______________________________________________

Last edited by don570 on Tue 21 May 2013, 20:04; edited 1 time in total
Back to top
View user's profile Send private message 
charlie6


Joined: 30 Jun 2008
Posts: 1020
Location: South of Belgium

PostPosted: Sat 09 Jun 2012, 15:00    Post subject: xf86-input-wacom-0.15.0 driver for kernel 3.0.25  

Bonjour Argolance,
Hi don570,
hope you all are doing at best !
Here is the latest driver wacom compiled for kernel 3.0.25 ( compiled on racy5.3 according to don570 tutorial see page 14 this thread ) and the corresponding xorg.conf that works here;

(note:
- from kernel 2.6.35 and later the "SendCoreEvents" after InputDevice is no longer required
- kernels serie 3.X come with wacom.ko kernel driver already compiled; so only the xf86-input-driver still needs being compiled and installed)

- working xorgconf:
Code:

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
...
# Xorg 7.4, Ubuntu Jaunty, CTRL-ALT-BACKSPACE is disabled by default...

    Option "DontZap" "false"

EndSection


Section "ServerLayout"
   Identifier     "X.org Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Mouse0" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
#from kernel 2.6.35 and later the "SendCoreEvents" after InputDevice is no longer required
   InputDevice    "stylus"
    InputDevice    "eraser"
    InputDevice    "cursor"
    InputDevice    "pad"      
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "kbd"
   Option      "XkbRules" "xorg"
   Option      "XkbModel" "pc102" #xkbmodel0
   Option      "XkbLayout" "be" #xkeymap0
   #Option      "XkbVariant" "" #xkbvariant0
EndSection

Section "InputDevice"
      Identifier    "stylus"
      Driver        "wacom"
      Option        "Device" "/dev/input/wacom"
      Option        "Type" "stylus"
     Option        "USB" "on"
     Option        "Mode" "Absolute"
      Option        "AlwaysCore" "on"
      Option        "Speed" "1.3"
      Option        "Threshold" "5"
      Option        "CursorProx" "5"
#     Option        "Speed" "5"
#     # Option        "ForceDevice"   "ISDV4"               # Serial Tablet PC ONLY
EndSection

Section "InputDevice"
      Identifier    "eraser"
      Driver        "wacom"
      Option        "Device" "/dev/input/wacom"
      Option        "Type" "eraser"
      Option        "USB" "on"
EndSection

Section "InputDevice"
      Identifier    "cursor"
      Driver        "wacom"
     Option        "Device" "/dev/input/wacom"
      Option        "Type" "cursor"
      Option        "USB" "on"
#     Option        "CursorProx" "100"
     Option        "Speed" "1.3"
EndSection

Section "InputDevice"
    Identifier     "pad"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "pad"
    Option         "USB" "on"
#   Option         "SendCoreEvents" "false"
    Option         "ButtonsOnly" "on"   
#    Option         "Button9" "2"
#    Option         "Button13" "3"
    Option         "Mode" "Absolute"   
EndSection

# if you have a touch pad just uncomment the next section

#Section "InputDevice"
#    Identifier     "touch"
#    Driver         "wacom"
#    Option         "Device" "/dev/input/wacom"
#    Option         "Type" "touch"
#    Option         "USB" "on"
# EndSection
...

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


- install input driver (download bottom this post)
- then edit /etc/X11/xorg.conf as above (be carefull backuping the original xorg.conf ...one never knows..!);
- restart X and do in a console:
Code:
#depmod
#modprobe wacom

- then check doing in a console gets to:
Code:

# xsetwacom --list
stylus                             id: 8   type: STYLUS   
eraser                             id: 9   type: ERASER   
cursor                             id: 10   type: CURSOR   
pad                                id: 11   type: PAD       
#


- here running with bamboo MTE-450A + touchring (I do not use this ring...!); as also a Volito1 (that driver support all wacom USB tablets type as far as I know - do not know for serial)
- Tested only on mtpaint: pressure sensitivity works!

hope this helps.
Enjoy! = bon amusement!
xf86-input-wacom_k3.0.25-0.15.0.pet
Description 
pet

 Download 
Filename  xf86-input-wacom_k3.0.25-0.15.0.pet 
Filesize  235.11 KB 
Downloaded  374 Time(s) 
Back to top
View user's profile Send private message 
Argolance


Joined: 06 Jan 2008
Posts: 1846
Location: PORT-BRILLET (Mayenne - France)

PostPosted: Sun 10 Jun 2012, 05:24    Post subject:  

YYYYYEEEESSSS! Very Happy
(... No comment!)
@charlie6 & @don570
Thank you so much to both of you. This was indeed the only thing that prevented me from passing completely from the version 4.31 to the version 5.3 of Puppy... Done!
Had finally nothing to change inside my Xorg.conf file: just install the pet package and restart X!

    # xsetwacom --list
    Quote:
    stylus id: 8 type: STYLUS
    eraser id: 9 type: ERASER
    cursor id: 10 type: CURSOR

    # grep -i wacom /var/log/Xorg.0.log
    Quote:
    [ 358.272] (II) LoadModule: "wacom"
    [ 358.272] (II) Loading /usr/X11R7/lib/xorg/modules/input/wacom_drv.so
    [ 358.272] (II) Module wacom: vendor="X.Org Foundation"
    [ 358.275] (II) LoadModule: "wacom"
    [ 358.275] (II) Loading /usr/X11R7/lib/xorg/modules/input/wacom_drv.so
    [ 358.275] (II) Module wacom: vendor="X.Org Foundation"
    [ 360.606] (II) Using input driver 'wacom' for 'stylus'
    [ 360.606] (II) Loading /usr/X11R7/lib/xorg/modules/input/wacom_drv.so
    [ 360.606] (**) Option "Device" "/dev/input/wacom"
    [ 360.606] (--) stylus: Wacom USB Graphire3 tablet maxX=10208 maxY=7424 maxZ=511 resX=80000 resY=80000 tilt=disabled
    [ 360.633] (II) Using input driver 'wacom' for 'eraser'
    [ 360.633] (II) Loading /usr/X11R7/lib/xorg/modules/input/wacom_drv.so
    [ 360.633] (**) Option "Device" "/dev/input/wacom"
    [ 360.633] (--) eraser: Wacom USB Graphire3 tablet maxX=10208 maxY=7424 maxZ=511 resX=80000 resY=80000 tilt=disabled
    [ 360.647] (II) Using input driver 'wacom' for 'cursor'
    [ 360.647] (II) Loading /usr/X11R7/lib/xorg/modules/input/wacom_drv.so
    [ 360.647] (**) Option "Device" "/dev/input/wacom"
    [ 360.647] (--) cursor: Wacom USB Graphire3 tablet maxX=10208 maxY=7424 maxZ=511 resX=80000 resY=80000 tilt=disabled

Cordialement!

_________________


Last edited by Argolance on Sun 10 Jun 2012, 06:16; edited 1 time in total
Back to top
View user's profile Send private message Visit poster's website 
Argolance


Joined: 06 Jan 2008
Posts: 1846
Location: PORT-BRILLET (Mayenne - France)

PostPosted: Sun 10 Jun 2012, 05:48    Post subject:  

Hello,
I see that the wacom module is loaded twice: The line
Load "wacom"
inside the "Section "Module" seems to be useless.

I found something else in my xerrs.log, which doesn't prevent my tablet from working properly:
Quote:
EE) tool not initialized yet. Skipping event.
(EE) tool not initialized yet. Skipping event.
(EE) tool not initialized yet. Skipping event.
(EE) tool not initialized yet. Skipping event.
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
[dix] Unknown event type 35. No filter
...
It is probably not important but I like when things are as clea(r)n as possible and above all, I like to understand...
Cordialement.
Back to top
View user's profile Send private message Visit poster's website 
charlie6


Joined: 30 Jun 2008
Posts: 1020
Location: South of Belgium

PostPosted: Tue 12 Jun 2012, 15:11    Post subject: xf86-input-wacom driver for dpup Exprimo 5.X.3.4.2  

Hi,
here is the latest xf86-input-wacom version 0.15.0 driver for kernel 3.4.2, compiled on dpup Exprimo 5.X.3.4.2.
Tested OK on mtpaint 3.44.03 - pressure sensitivity works OK - wacom tablet bamboo MTE-450 (works for all type; here works also with Volito1).
Install; then edit xorg.conf: add the wacom options present in /etc/X11/wacom_xorgdotconf_bits.txt; then restart X;
to check if the tablet devices are recognized:
Code:
# xsetwacom --list
stylus                             id: 8   type: STYLUS   
eraser                             id: 9   type: ERASER   
cursor                             id: 10   type: CURSOR   
pad                                id: 11   type: PAD       

Read the present thread to learn a bit more about how to Wink
Enjoy!
Charlie
xf86-input_k.3.4.2-dpup-wacom-0.15.0.pet
Description 
pet

 Download 
Filename  xf86-input_k.3.4.2-dpup-wacom-0.15.0.pet 
Filesize  236.6 KB 
Downloaded  360 Time(s) 
Back to top
View user's profile Send private message 
don570


Joined: 10 Mar 2010
Posts: 3379
Location: Ontario

PostPosted: Sat 16 Jun 2012, 14:09    Post subject:  

To Charlie : I can confirm that the driver works on the most
recent pemasu exprimo distribution
http://www.smokey01.com/pemasu/DpupSqueeze5X/DpupExprimo5X3421/

It doesn't work in Precise but that didn't surprise me.

______________________________________________
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 17 of 24 [349 Posts]   Goto page: Previous 1, 2, 3, ..., 15, 16, 17, 18, 19, ..., 22, 23, 24 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » House Training » HOWTO ( Solutions )
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1782s ][ Queries: 13 (0.0123s) ][ GZIP on ]