Raspberry Puppi

A home for all kinds of Puppy related projects
Post Reply
Message
Author
User avatar
antiloquax
Posts: 405
Joined: Fri 27 Jan 2012, 09:17

#121 Post by antiloquax »

Lobster wrote: The procedure:
http://puppylinux.org/wikka/PuppiArch

The good news is it is FAST. 8)

The next step is to populate it a little with progs and such . . .
Excellent - I hope you'll have the chance to test some of the stuff that's on my ftp site!

No pi today. Maybe tomorrow ...

Here's gtkdialog to try (compiled on Arch ARM).
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#122 Post by Lobster »

Image

Latest Puppi Arch pre-alpha pic above
- will try gtkdialog - many thanks . . .

Netsurf is not working very well and JWM is flaky
Do not use anything but a powered hub if possible

Arch is noticeably faster than Debian
I also got LXDE working - seemed OK but I immediately tried JWM
and that has me convinced that Puppi can be fast. Hooray. 8)

Do you know where the jwm config file is kept (if available?)
I should know this . . .
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#123 Post by Lobster »

OK in netsurf in Puppi Arch - delicate stuff
found jwm config file in /etc/system.jwmrc
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#124 Post by Lobster »

Image
Gtkdialog working . . . Got my Buddhistyap program (see wiki) to run - only had to change one line of code . . .
http://raspberrypy.tumblr.com/post/2378 ... puppi-arch

This is very good for me (and the Buddhas may send me extra nectar points and a free pass to the AI Purelands) :roll:

8)

Puppy Linux
Run smarter
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#125 Post by BarryK »

Lobster wrote:Image
Gtkdialog working . . . Got my Buddhistyap program (see wiki) to run - only had to change one line of code . . .
http://raspberrypy.tumblr.com/post/2378 ... puppi-arch
Good! The thing is, does it render the widgets correctly? This was one of the big showstoppers in my armv7 compile on the Mele A1000, as I reported in my blog:

http://bkhome.org/blog/?viewDetailed=02809
http://bkhome.org/blog/?viewDetailed=02808

If antiloquax's binary works, I will use that!

EDIT: from the picture you have posted, it looks like you have the same problem.
Last edited by BarryK on Sat 26 May 2012, 09:35, edited 1 time in total.

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#126 Post by 01micko »

Lobster,

JWM config files in $HOME (your home directory, /root if running as root, or /home/Ed if running as user Ed) will override whatever is in /etc.

-

antiloquax

I see you've compiled vala for raspi. That will be very handy for the kids as it is heavily influenced by C♯ and already supported in Puppy.

Hmm.. better gets some pi at some point I guess..

-

Barry... look at Lobster's screeny :(
Puppy Linux Blog - contact me for access

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#127 Post by Lobster »

Good! The thing is, does it render the widgets correctly?.
No it don't - see Micks observation . . . :roll:
I thought that was a detail - apparently not!
Last edited by Lobster on Mon 28 May 2012, 09:35, edited 1 time in total.
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#128 Post by Lobster »

Hmm.. better gets some pi at some point I guess..
Thanks Mick for tips.
The Rpi partners are ramping up production but not yet at the stage of order and arrive.
Two months delay if you order today.
Ay chihuahua! :roll:

I am in a position of having to learn everything
Stuff that comes naturally to command line and scripting Puppys . . .
Barry, yourself and our other smart dogs.

For example I needed the pipe symbol |
On a UK keyboard this = right Alt Gr key + the key to the left of z
and then it turned into ½ or was it 0.25 . . .
Last edited by Lobster on Fri 08 Jun 2012, 07:05, edited 2 times in total.
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

eowens2
Posts: 177
Joined: Wed 27 Aug 2008, 17:57

#129 Post by eowens2 »

Hi guys! I have been following this thread with interest for some time. I got tired of waiting for my R_pi (delivery not expected for another 3-4 weeks) and decided to wander into the raspberry thicket where y'all are playing. But since I am pretty much an amateur beginning noobie (yes I know, redundancy) things are very confusing.

I am using Qemu 0.14.0 within Ubuntu 11.10 and have R_pi up and running (Debian6-19-04-2012, zImage_3.1.9). I can compile, "gcc hello_world.c" => a file which "file hello_world" identifies as an arm file.

I have done a sudo apt-get install (my network seems to running O.K.) of jwm, rox-filer, and rxvt. I can call each of these from the command line and they seem to do their thing (more or less).

When I do "startx" in the R_pi terminal I get the LXDE enviornment with LXTerminal, Midori, PCManFM plus a number of other applications.

When I do a "sudo xinit /usr/bin/jwm" in the R_pi terminal, I get an empty JWM screen. When I click on the JWM button in the left lower corner of the screen, I get all of the same menus (and active programs) that were in the LXDE desktop!

Question: How do I get "startx" to bring up the JWM enviornment rather than LXDE, and get rxvt and rox-filer as options in the menus rather than the applications that are default in LXDE?

Question #2: Y'all seem to be moving briskly on the arm platform as well as Debian. And you seem to compiling a lot of the applications. Does Arch not have a repository of pre-compiled stuff that you can download from?

Question #3: How do I change the screen resolution to something like 1024 x 768?

Thank you.

(Edit: Question #2 should read: "moving briskly on the Arch platform" )

User avatar
rhadon
Posts: 1292
Joined: Thu 27 Mar 2008, 11:05
Location: Germany

#130 Post by rhadon »

Hi,

I got my Raspbberry some days ago, installed Debian and Arch and I'm trying to get more familiar with it. It's a hard way because I've never tested Arch before and my small experience with Debian was years ago.

The sound problem seems to be solved. The patch itself doesn't work in Arch (I think, it's for Debian) but the modprobe command does.

In Arch I installed deadbeef and run "modprobe snd_bmc2835" in a terminal. It works :D .

HTH
Rolf
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.

eowens2
Posts: 177
Joined: Wed 27 Aug 2008, 17:57

#131 Post by eowens2 »

I have been trying to set up a printer in Qemu/Debian/R_pi. In Midori I tried to go to http://localhost:631 but got an error saying "the page http:localhost:631 cannot be loaded" (the browser went to www.murga-linux.com without problem).

I added chromium-browser to R_pi, and it could not find localhost:631 either. So I checked (with Synaptic Package Manager) and CUPS is not in the Debian6 image provided by R_pi, so I added it with Synaptic.

CUPS could not find my networked HP 6500a inkjet so I went thru the setup pages using the connection "Socket://xxxxxxxxx:9100" that my Eeepc connecttion uses in Puppy Lucid 5.25. But so far it is not working.

Has anyone tried CUPS using Qemu or the real R_PI?

mrgreen
Posts: 7
Joined: Mon 28 May 2012, 06:41

#132 Post by mrgreen »

I would like to help out with Puppi project is there anything I can test or work on yet?

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#133 Post by Lobster »

anything I can test or work on yet?
You bet your chihuahau there is!
You will now be thrown in at the deep end :lol:

read up here for now . . .
http://raspberrypy.tumblr.com/
and here
http://puppylinux.org/wikka/PuppySchoolRaspberryPi
(you can join the wiki and improve/update the pages.

You can create tutorials, programs, videos, compile
Put the Puppi logo on a case
Puppy is a doacracy - no time for introductions :oops:
. . . eh welcome to the kennels . . . :)

Find antiloquax’s programs compiled in Qemu (email for a list of tests . . . antiloquax at sky.com)
For example Vala needs testing . . .
http://www.murga-linux.com/puppy/viewto ... 435#629435

and lastly and most importantly Barrys programs compiled on the mele
http://bkhome.org/blog/?viewDetailed=02805
these are the ones to test . . .
http://distro.ibiblio.org/quirky/arm/pe ... ges-armv6/
that should keep you occupied for a few months . . . :wink:
Last edited by Lobster on Mon 28 May 2012, 09:33, edited 1 time in total.
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

mrgreen
Posts: 7
Joined: Mon 28 May 2012, 06:41

#134 Post by mrgreen »

@Lobster why not add scrot to list of packages you could then take screenshots then upload them....

Stuck Arch on sd card, fired up updated added X plus openbox but keyboard and mouse refused to work..

Going to load up from scratch and test out your guide

Got a feeling I had hwdata errors during pacman update

Thanks for link up :)

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#135 Post by Lobster »

why not add scrot to list of packages
We could use scrot . . .
or use the screen shot under file/actions
in mtpaint . . . :)
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

mrgreen
Posts: 7
Joined: Mon 28 May 2012, 06:41

#136 Post by mrgreen »

loading up arch image now :)

User avatar
antiloquax
Posts: 405
Joined: Fri 27 Jan 2012, 09:17

#137 Post by antiloquax »

Great to see more Pi owners on here . I am hoping mine is waiting at home for me right now!

Long live the Do-ocracy!
mark
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.

mrgreen
Posts: 7
Joined: Mon 28 May 2012, 06:41

#138 Post by mrgreen »

First update of arch I go hwdata conflicts, like a muppet I removed them to allow install to carry on [-f did not work].

Think I will try jwm via guide see if I have any more luck

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#139 Post by Lobster »

I am going through the jwm setup using Arch again.

Step 3 has been updated
- the pacman program has to be updated
Step 3 Update 'Arch'
Arch is a rolling release - constantly updated .
Update command can take a while - took about 20 minutes on broadband

pacman -S pacman
pacman -Syu
there are also some procedures based around xinit/xstart
to prepare JWM that I have not documented and frankly am not sure how to implement

. . . hopefully Mark will have a Raspberry Pi shortly and can help out with info :)
. . . hope the postman delivered . . .
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

mrgreen
Posts: 7
Joined: Mon 28 May 2012, 06:41

#140 Post by mrgreen »

Decided to edit configs rc.conf, locales, mirrorlist

Switched mirrors to Germany based ones and got a load of different updates

Now get a better looking console display

Tried to get openbox to run but needed xorg loaded first

Managed to get X running but system locked up while installing firefox. ..so called it a day

Odd thing with lspci was not able to get any output

Did add a swapfile I know you are not meant to use one with sd card but I could not stand the pain of waiting for packages to load.

This of course could be solved if running from ram...

Post Reply