PupsaveConfig-2.2.5
pupsaveConfig-2.2.5
EDIT: there was a bug in v2.2.4, fixed at v2.2.5. See another post bellow.
Last edited by shinobar on Tue 30 Oct 2012, 04:24, edited 3 times in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
pupsaveconfig-2.2.4
UPDATED: pupsaveconfig-2.2.4
#7may12 - v2.2.3 shinobar: rc.shutdown: refined avoiding re-login (killfuser avoid killing my grand parents)
#20may12 - v2.2.4 shinobar: rc.shutdown: fix was failed to mount cd beacause of the probepart bug (tnx to phil66)
#7may12 - v2.2.3 shinobar: rc.shutdown: refined avoiding re-login (killfuser avoid killing my grand parents)
#20may12 - v2.2.4 shinobar: rc.shutdown: fix was failed to mount cd beacause of the probepart bug (tnx to phil66)
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Just short, shinobar : Now i have encountered this problem of re-login also .
Full installation to "Normal HDD Setup" with 2 Win ntfs partitions
and the OEM recovery fat partition - resized -
and made a fourth extended partition with two swaps - one for swap and one for suspend to disk -
and a 6-7 GB ext4 partition with racy-5.3 on it PUPMODE=2 plus Saluki-19 frugal PUPMODE=12 .
I was running the full install several times and it powered off or rebooted ok, and all of a sudden today it started to kill a process that seems to do a re-login, since i have taken out several rm -rf from rc.shutdown and put the rm -rf /tmp into rc.sysinit (together with a mkdir -p /tmp;chmod 1777 /tmp) - so bootcnt.txouch is still there, so no automatic xwin for me .
I first replaced fuser with busybox fuser since busybox seems to honour PID 1 - init automatically . Tjhat worked ok, but i am unsure if that is the right way . Besides PID1 i started to filter `pidof reboot`, `pidof poweroff` and "$$" which seems to work for me .
Besides that, the fuser command leaves a bunch of several dozen <defuncts> @me for some [milli]seconds . I have put a sleep 2 at first line of killzombies function.
Am reading your code now ! Thanks !
Full installation to "Normal HDD Setup" with 2 Win ntfs partitions
and the OEM recovery fat partition - resized -
and made a fourth extended partition with two swaps - one for swap and one for suspend to disk -
and a 6-7 GB ext4 partition with racy-5.3 on it PUPMODE=2 plus Saluki-19 frugal PUPMODE=12 .
I was running the full install several times and it powered off or rebooted ok, and all of a sudden today it started to kill a process that seems to do a re-login, since i have taken out several rm -rf from rc.shutdown and put the rm -rf /tmp into rc.sysinit (together with a mkdir -p /tmp;chmod 1777 /tmp) - so bootcnt.txouch is still there, so no automatic xwin for me .
I first replaced fuser with busybox fuser since busybox seems to honour PID 1 - init automatically . Tjhat worked ok, but i am unsure if that is the right way . Besides PID1 i started to filter `pidof reboot`, `pidof poweroff` and "$$" which seems to work for me .
Besides that, the fuser command leaves a bunch of several dozen <defuncts> @me for some [milli]seconds . I have put a sleep 2 at first line of killzombies function.
Am reading your code now ! Thanks !
doesn't detect pupsave on the hard drive
If you have 'pmedia=usbflash' boot option, remove this pmedia option.Ghost Dog wrote:I'm using this on Slacko 3.3, running from a usb stick, and while it saves on my hard drive fine, Puppy doesn't detect it at boot.
The boot option is on a file named menu.lst, syslinux.cfg, or extlinux.conf.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
this tool should be by default on any distro
Merci de l'avoir fait.
No bug from my side. Very usefull tool !
No bug from my side. Very usefull tool !
I haven't seen any NLS files, so I made a translation to Spanish for version 2.2.4 which I currently use. Note: there are a few lines with provisional translations, I'll post the file with those lines revised later. Also, the AR is just the country chosen for the system, the translation is in standard Spanish and shall work whatever Hispanic country is chosen.
- Attachments
-
- MoManager-es_AR-pupsaveconfig-2.2.4.tar.gz
- (7.07 KiB) Downloaded 1038 times
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
pupsaveConfig-2.2.5
There was a bug in v2.2.4, fixed at v2.2.5.
http://shino.pos.to/linux/puppy/
http://shino.pos.to/linux/puppy/
Note that pupsaveconfig-2.2.5.pet does not have NLS. pupsaveconfig_NLS is coming soon./etc/rc.d/rc.shutdown-v2.2.5 wrote:#29apr12: do not kill myself to avoid re-login
#7may12 - v2.2.3: avoid killing my grand parents, more verbose under debug mode
#v2.2.4: fix typo
#v2.2.5: fix again killing my grand parents
MYPID=$$
PARENT=$PPID
killfuser() {
[ "$1" ] || return
BADPIDS="`fuser -m $1 2>/dev/null`"
[ "$BADPIDS" ] || return
PSRESULT=$(ps -al)
PSRESULT=$(echo "$PSRESULT"| tr -s ' ' | cut -f4,5,14 -d' ')
[ "$VERBOSE" = 'debug' ] && echo "MYPID=$MYPID, PARENT=$PARENT"
for ONEBAD in $BADPIDS
do
[ "$ONEBAD" = "$MYPID" ] && continue
[ "$ONEBAD" = "$PARENT" ] && continue
echo "$PSRESULT" | grep -w "$ONEBAD" | grep -qw -E "$PARENT|poweroff|reboot" && continue
if [ "$VERBOSE" ]; then
[ "$VERBOSE" = 'debug' ] && echo "$PSRESULT" | grep -w $ONEBAD
echo -n "Killing process $ONEBAD..."
if [ "$VERBOSE" = 'debug' ]; then
echo -n ", or skip(S)? " ; read R
R=$(echo $R | tr 's' 'S' | cut -b1)
[ "$R" = 'S' ] && continue
else
echo > /dev/console
fi
fi
kill $ONEBAD
sleep 1
kill -9 $ONEBAD 2>/dev/null
sync
done
}
Last edited by shinobar on Mon 21 Jan 2013, 02:35, edited 1 time in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Please see my post here
This doesn't happen to me in latest Precise, Slacko or Wary, even with PupShutdown installed.
This doesn't happen to me in latest Precise, Slacko or Wary, even with PupShutdown installed.
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
-
- Posts: 3
- Joined: Thu 21 Mar 2013, 05:29
-
- Posts: 60
- Joined: Sat 22 Jan 2011, 07:50
installed apps saved at pupsave
It is the fault of the petget (Puppy Package Manager).mhanifpriatama wrote:I installed to slacko5.5, Likely worked, I change to -0 (do not save). But,when I install apps (in another day), why it save at pupsave file without run savepupsave ?
Sorry for my English.
One of the solution is to use the petget-20120418.
http://www.murga-linux.com/puppy/viewtopic.php?t=64708
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
- ASRI éducation
- Posts: 3197
- Joined: Sat 09 May 2009, 12:10
- Location: France
- Contact:
Hello shinobar,
I'm ok to translate pupsaveconfig into French.
Question: Can I use the file http://shino.pos.to/linux/puppy/pupsaveconfig.pot, it is updated for version 2.2.5?
Sincerely,
I'm ok to translate pupsaveconfig into French.
Question: Can I use the file http://shino.pos.to/linux/puppy/pupsaveconfig.pot, it is updated for version 2.2.5?
Sincerely,
pupsaveconfig.pot
No problem, but i have made it updated.ASRI éducation wrote:Can I use the file http://shino.pos.to/linux/puppy/pupsaveconfig.pot, it is updated for version 2.2.5?
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
- ASRI éducation
- Posts: 3197
- Joined: Sat 09 May 2009, 12:10
- Location: France
- Contact:
Re: pupsaveconfig.pot
Ok !shinobar wrote:No problem, but i have made it updated.ASRI éducation wrote:Can I use the file http://shino.pos.to/linux/puppy/pupsaveconfig.pot, it is updated for version 2.2.5?
![Very Happy :D](./images/smilies/icon_biggrin.gif)
- ASRI éducation
- Posts: 3197
- Joined: Sat 09 May 2009, 12:10
- Location: France
- Contact:
I tested FR translation with PupsaveConfig v2.2.5 and Precise Puppy v5.4.92.
This seems ok.
Cordialement,
This seems ok.
Cordialement,
- Attachments
-
- pupsaveconfig-2.2.5_localeFR_20130520.pet
- fr.po, pupsaveconfig.mo, pupsaveconfig.txt, pupsaveconfig.desktop
md5 5b8166b6a3baade0e29ab047b1cd6045 - (15.45 KiB) Downloaded 448 times
bug in PupSaveConfig v2.2.5?
Working in Carolina lite I just noticed that the option to create a 2fs/3fs/4fs only works when I create the personal save file immediately after the first boot from an iso (or pfix=ram).
But when I first make localization / keyboard adjustments, perhaps add some software etc, and then attempt to create a personal save file it fails. First I can not make it larger than 0kb, plus the options for 3fs and 4fs disappear. In this stage a 2fs and 3fs but not 4fs can only be created after ctrl-alt-backspace and the reboot command.
This is both in Carolina and in carolina lite (frugally installed).
I think this is a but in PupSaveConfig 2.2.5 but I am not sure.
But when I first make localization / keyboard adjustments, perhaps add some software etc, and then attempt to create a personal save file it fails. First I can not make it larger than 0kb, plus the options for 3fs and 4fs disappear. In this stage a 2fs and 3fs but not 4fs can only be created after ctrl-alt-backspace and the reboot command.
This is both in Carolina and in carolina lite (frugally installed).
I think this is a but in PupSaveConfig 2.2.5 but I am not sure.
Re: bug in PupSaveConfig v2.2.5?
What is your locale?Dromeno wrote:But when I first make localization / keyboard adjustments
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Tutorial pupsaveconfig
Explanations given in the first topic. congratulations. pupsaveconfig is described step by step.
If my little video can help too here it is
This video was a memo for myself, so it's a french spoken one, i Make it better right now
click there
Improved, but i join some music, no explanations needed, because everything is said upper.![Razz :P](./images/smilies/icon_razz.gif)
I have some problems shutting down Puppy Night LXDE. Nothing prooved that pupsaveconfig is the reason.
If my little video can help too here it is
This video was a memo for myself, so it's a french spoken one, i Make it better right now
click there
Improved, but i join some music, no explanations needed, because everything is said upper.
![Razz :P](./images/smilies/icon_razz.gif)
I have some problems shutting down Puppy Night LXDE. Nothing prooved that pupsaveconfig is the reason.
- Attachments
-
- lionel.jpg
- (60.19 KiB) Downloaded 444 times
Last edited by Pelo on Wed 09 Jul 2014, 17:38, edited 3 times in total.