Yes, comes up on every reboot. It was still in the /root/startup, removing it prevents the error message, however there is no temp sensor.pemasu wrote:Jim1911. That message reports to remove it. Do you get it again when you restart X ?
Dpup Exprimo 5.X.3.4.12 with 3.4.2 kernel.
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi,
I was missing a wordprocessor on Exprimo ... so I googled around ...and wanted a tiny and simple wordprocessor ... not longer Abiword; not LibreOffice (too big too elaborate) so back to Ted !
Here tested ted-2.22-i386.deb (basic US locale) + specific french locale ted_fr_FR-2.22.all.deb
download and explanations here
http://www.nllgg.nl/Ted/
other locale are available on that website + conversion scripts (rtf to ps , pdf, html) as translated help files.
I could get the localized desktop for fr_BE doing a symlink called /usr/lib/X11/fr_BR.UTF-8 pointing to the existing /usr/lib/X11/fr_FR
Seems sufficient for daily use and also working nice!
Cheers, Charlie
I was missing a wordprocessor on Exprimo ... so I googled around ...and wanted a tiny and simple wordprocessor ... not longer Abiword; not LibreOffice (too big too elaborate) so back to Ted !
Here tested ted-2.22-i386.deb (basic US locale) + specific french locale ted_fr_FR-2.22.all.deb
download and explanations here
http://www.nllgg.nl/Ted/
other locale are available on that website + conversion scripts (rtf to ps , pdf, html) as translated help files.
I could get the localized desktop for fr_BE doing a symlink called /usr/lib/X11/fr_BR.UTF-8 pointing to the existing /usr/lib/X11/fr_FR
Seems sufficient for daily use and also working nice!
Cheers, Charlie
I have tried the new version and the last one. It boots OK but when it comes to xorg, the screen turned black and the computer will not respond to any key or mouse operation. I did a reboot with nox and do a manual xorgwizard. Both probe and choose (an intel driver) give the same black dead screen. Xvea runs OK. Also, older version of Exprimo and other puppy derivatives like lupu528 and icepuppy014 work OK right out of the box. Could it be some driver missing?
My PC is an Asus Zenbook UX31E. A lspci give the following.
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:0104] (rev 09)
00:02.0 VGA compatible controller [0030]: Intel Corporation Device [8086:0116] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #1 [8086:1c3a] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High Definition Audio Controller [8086:1c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 1 [8086:1c10] (rev b5)
00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 2 [8086:1c12] (rev b5)
00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 4 [8086:1c16] (rev b5)
00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:1c4d] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point SATA AHCI Controller [8086:1c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller [8086:1c22] (rev 05)
02:00.0 Network controller [0280]: Atheros Communication Inc. Device [168c:0032] (rev ff)
03:00.0 USB controller [0c03]: Device [1b73:1009] (rev 02)
My PC is an Asus Zenbook UX31E. A lspci give the following.
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:0104] (rev 09)
00:02.0 VGA compatible controller [0030]: Intel Corporation Device [8086:0116] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #1 [8086:1c3a] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High Definition Audio Controller [8086:1c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 1 [8086:1c10] (rev b5)
00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 2 [8086:1c12] (rev b5)
00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 4 [8086:1c16] (rev b5)
00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:1c4d] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point SATA AHCI Controller [8086:1c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller [8086:1c22] (rev 05)
02:00.0 Network controller [0280]: Atheros Communication Inc. Device [168c:0032] (rev ff)
03:00.0 USB controller [0c03]: Device [1b73:1009] (rev 02)
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi,
whenever opening a Gtk dialog box to open a file, here get the following message:
this seems happening using whatever applications: planner; viwnior; Ted; etc..
Does this cause eventual unexpected mysfunction?
Any idea to fix it?
Charlie
ps: last edited: this also happens on a fresh dpup-exprimo session
whenever opening a Gtk dialog box to open a file, here get the following message:
Code: Select all
Gtk-Message: (for origin information, set GTK_DEBUG): failed to retrieve property `GtkTreeView::odd-row-color' of type `GdkColor' from rc file value "((GString*) 0x80d1090)" of type `GString'
Does this cause eventual unexpected mysfunction?
Any idea to fix it?
Charlie
ps: last edited: this also happens on a fresh dpup-exprimo session
- Attachments
-
- gtk.png
- (73.98 KiB) Downloaded 318 times
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi,
here happened to open a 2MB (might be an A0 size) architectural drawing ... using evince ... and it got frozen. Very slow at the beginning using the default "fit to screen size" setting.
Increasing the zoom size (to about 175%) got evince to slow and at then like frozen ... or being damn awfully slow..!
As I could open that same file on Slacko and read it without difficulty, I installed epdfview-1.8.0-w5 from wary-5 repo. As also the requested dependencies:
libssl.1.0.0 symlink to libssl.0.9.8 these coming fromhttp://packages.ubuntu.com/fi/precise/libssl1.0.0 (thanX Pemasu !)
libcrypto.so.1.0.0 symlink to already present libcrypto.0.9.8
libpoppler.so.13 symlink to already present libpoppler.so.5.0.0
Cheers, Charlie
here happened to open a 2MB (might be an A0 size) architectural drawing ... using evince ... and it got frozen. Very slow at the beginning using the default "fit to screen size" setting.
Increasing the zoom size (to about 175%) got evince to slow and at then like frozen ... or being damn awfully slow..!
As I could open that same file on Slacko and read it without difficulty, I installed epdfview-1.8.0-w5 from wary-5 repo. As also the requested dependencies:
libssl.1.0.0 symlink to libssl.0.9.8 these coming fromhttp://packages.ubuntu.com/fi/precise/libssl1.0.0 (thanX Pemasu !)
libcrypto.so.1.0.0 symlink to already present libcrypto.0.9.8
libpoppler.so.13 symlink to already present libpoppler.so.5.0.0
Cheers, Charlie
Hello, Charlie6.charlie6 wrote:Hi,
whenever opening a Gtk dialog box to open a file, here get the following message:this seems happening using whatever applications: planner; viwnior; Ted; etc..Code: Select all
Gtk-Message: (for origin information, set GTK_DEBUG): failed to retrieve property `GtkTreeView::odd-row-color' of type `GdkColor' from rc file value "((GString*) 0x80d1090)" of type `GString'
Does this cause eventual unexpected mysfunction?
Any idea to fix it?
Charlie
ps: last edited: this also happens on a fresh dpup-exprimo session
This is not an exprimo, a slacko or a wary problem. It may happen in any Puppy.
This happens because the artists who design the gtk themes are not necessarily fluent in GTK commands / procedures. Also, various versions of GTK-2 are used on different Puppies, so this type of error is frequent.
But it is nothing dangerous or to worry about. The worst thing that can happen is that the GTK theme you chose will not display properly on your screen; it will display probably in grey shades, like the "default" theme, or a little icon will be missing in the window manager frame.
Best regards.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
- Iguleder
- Posts: 2026
- Joined: Tue 11 Aug 2009, 09:36
- Location: Israel, somewhere in the beautiful desert
- Contact:
pemasu, I just wrote a simple suspend tool called "frost" (here). I heard AcpiTool has some compatibility issues with Linux 3.x, so I decided to write a tool that suspends the system, since that's the only reason I like it.
Should be pretty useful with the combination of XBindKeys (e.g ALT + Fn + F1 suspends the system) - I remember I discovered AcpiTool thanks to you, so here's my way to thank you
Should be pretty useful with the combination of XBindKeys (e.g ALT + Fn + F1 suspends the system) - I remember I discovered AcpiTool thanks to you, so here's my way to thank you
[url=http://dimakrasner.com/]My homepage[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]
Thanks Iguleder. I will definitively test it.
Yeah. Acpitool needs to be patched until it works with 3.X kernels. I use Jemimah`s patched source.
http://www.smokey01.com/jemimah/saluki/ ... hed.tar.gz
But another suspending tool is always welcome...some ppl have problems with waking up...so...testing new tool is great.
Thanks.
Yeah. Acpitool needs to be patched until it works with 3.X kernels. I use Jemimah`s patched source.
http://www.smokey01.com/jemimah/saluki/ ... hed.tar.gz
But another suspending tool is always welcome...some ppl have problems with waking up...so...testing new tool is great.
Thanks.
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi Pemasu,
This seems general for all dpup-Exprimo tested till now:
opening rox and doing a drag and drop of a file , there is no dashed border highlighting of the destination dir (as it is the case on other Puppies) before selecting the action (i.e. copy / move / link / ..).
So I am not sure to direct the file to the desired directory, a confusion may occur. I have then to check in the desired directory if the file is well in.
Cheers, Charlie
This seems general for all dpup-Exprimo tested till now:
opening rox and doing a drag and drop of a file , there is no dashed border highlighting of the destination dir (as it is the case on other Puppies) before selecting the action (i.e. copy / move / link / ..).
So I am not sure to direct the file to the desired directory, a confusion may occur. I have then to check in the desired directory if the file is well in.
Cheers, Charlie
Relevant info about that full install boot time failure message:
Making the filesystem usable.....failed
http://www.murga-linux.com/puppy/viewto ... 445#622445
Making the filesystem usable.....failed
http://www.murga-linux.com/puppy/viewto ... 445#622445
Note to pemasu... Check out my new puppy backup software.
I was able to convert pmirror so that it
can mirror 5 folders now.
I call the application 'Puppy backup 1.4'
http://murga-linux.com/puppy/viewtopic.php?t=77685
___________________________________________________
I was able to convert pmirror so that it
can mirror 5 folders now.
I call the application 'Puppy backup 1.4'
http://murga-linux.com/puppy/viewtopic.php?t=77685
___________________________________________________
When the background picture is black, a black terminal looks strange.
The terminal background color can be change to a dark blue.
____________________________________________________
Is there something wrong with the screen saver? I can't get it
to work even though it says it's on.
_____________________________________________________
The terminal background color can be change to a dark blue.
____________________________________________________
Is there something wrong with the screen saver? I can't get it
to work even though it says it's on.
_____________________________________________________
Ndiswrapper
Being an newbe with puppylinux I try to find the right setup for an old Sony laptop with a PII 400 Mhz but only 128 MB which is the max. I want to run Spotify on it nothing else.
So far Dpup Exprimo is the only one I found were the nativ linux version of Spotify runs. However I miss the ndiswrapper module.
I tried several versions but no success. I reports that the module cannot be found.
Does anyone have a suggestion? To get ndiswrapper running on exprimo or spotify on another puppylinux.
Thanks
espe
So far Dpup Exprimo is the only one I found were the nativ linux version of Spotify runs. However I miss the ndiswrapper module.
I tried several versions but no success. I reports that the module cannot be found.
Does anyone have a suggestion? To get ndiswrapper running on exprimo or spotify on another puppylinux.
Thanks
espe