Puppy Linux Discussion Forum

[James C]

# report-video
lspci: error while loading shared libraries: libpci.so.3: cannot open shared object file: No such file or directory
Upup Precise, version 5.3.3 on Fri 20 Apr 2012

Chip description:

oem: NVidia
product: NV18 () Board Chip Rev A2

X Server: Xorg
Driver used: nouveau

X.Org version: 1.11.4
dimensions: 1440x900 pixels (380x238 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (187MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Fri 20 Apr 2012 11:18:57 AM GMT-8
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Mesa DRI nv18 x86/MMX+/3DNow!+/SSE
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235

-Version-
Kernel : Linux 3.3.2-upup (i686)
Compiled : #1 SMP Wed Apr 18 20:00:55 EEST 2012
C Library : GNU C Library version 2.15 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution

[pemasu]

libpci3 added to the distro pkgs specs. Thanks James C.

[oldyeller]

Hi pemasu

Looks real good. I am running on a Dell D430 and it recognizes my hadware, but there is only one thing so far. That is I can not change screen resolution on it.

I have a ASUS 24" external screen and it stays at 1280x800 no matter how I try to change it. Well check others things soon.

oem: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
product: Intel(r) 82945GM Chipset Family Graphics Controller Hardware Version 0.0

X Server: Xorg
Driver used: # vesa

X.Org version: 1.11.4
dimensions: 1920x1080 pixels (507x285 millimeters)
depth of root window: 24 planes
[ 1803.600]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 1803.600] X Protocol Version 11, Revision 0

thanks

oldyeller

[Billtoo]

I did a manual frugal install to a flash drive.
I had some problems loading the kernel source sfs but managed to get
it done using the bootmanager.
Between ppm and some pets that I have I got vlc and smplayer working.

Fri 20 Apr 2012 Operating System: Upup Precise-5.3.3 Linux 3.3.2-upup

oem: NVIDIA product: GF110 Board - 12630002 Chip Rev

X Server: Xorg Driver: nvidia
X.Org version: 1.11.4
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes

direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTX 560 Ti/PCIe/SSE2
OpenGL version string: 4.2.0 NVIDIA 295.40

edit: I installed kdegames in ppm it works.

[oldyeller]

Also GParted is not working.


Upup Precise 5.3.3

84 Tasks, 3 Running. Uptime: 1:17, load average: 0.00, 0.04, 0.04

Current window manager: JWM (starts from C.L. with: 'xwin jwm')

JWM vsvn-574
ROX-Filer 2.11

Network Interface wlan0 connected

=== report-video ===

Upup Precise, version 5.3.3 on Fri 20 Apr 2012

Chip description:

oem: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
product: Intel(r) 82945GM Chipset Family Graphics Controller Hardware Version 0.0

X Server: Xorg
Driver used: # vesa

X.Org version: 1.11.4
dimensions: 1920x1080 pixels (507x285 millimeters)
depth of root window: 24 planes
[ 1803.600]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 1803.600] X Protocol Version 11, Revision 0

[oui]

are those recommandations in head of .jwmrc really actual?

[pemasu]

Yes...you need to edit that template. When you run the fixmenus, that template will updated to replace the .jwmrc which is in use

[majorfoo]

Booted from live cd

sound ok
auto connected to internet

Abiword -ok
Gnumeric - received error that libgconf.2.so.4 was missing
Copied this lib from another distro and Gnumeric opened, however, received following messages

GConf Error: Configuration server couldn't be contacted: D-BUS error: Message did not receive a reply (timeout by message bus)
process 8983: arguments to dbus_message_new_method_call() were incorrect, assertion "path != NULL" failed in file dbus-message.c line 1070.
This is normally a bug in some application using the D-Bus library.
D-Bus not built with -rdynamic so unable to print a backtrace
Aborted

[pemasu]

Gparted is missing, yes. Interesting. Gparted package has been included but....

it seems that the needed libatkmm is missing and also symlink from gpartedbin to gparted.
Will be added.

[pemasu]

[majorfoo]

[rcrsn51]

CUPS won't detect networked printers. This can be fixed by using the snmp backend from Slacko.

CUPS won't print a test page because of missing content.

In the long run, it would be less trouble to downgrade 1.5 to 1.3.11.

[pemasu]

It sounds promising when rcrsn51, our cups - printer master, suggests cups downgrade.

Yeah...well. Working cups - printing is all I want. It does not matter what version it is.

http://distro.ibiblio.org/quirky/pet_packages-wary5/

[oui]

2 questions:

- why did the iso increase as much?

- why in «derivatives» as BK did start this new line himself?

[mavrothal]