Saluki

A home for all kinds of Puppy related projects
Message
Author
User avatar
DaveS
Posts: 3685
Joined: Thu 09 Oct 2008, 16:01
Location: UK

#1741 Post by DaveS »

Just a quick Heads Up for those that missed it, the new Midori release now supports drag and drop re-ordering of speed dial buttons :)
Spup Frugal HD and USB
Root forever!

User avatar
Aitch
Posts: 6518
Joined: Wed 04 Apr 2007, 15:57
Location: Chatham, Kent, UK

#1742 Post by Aitch »

Hmm, the tray doesn't run iwconfig, but I may be able to get the info from /sys/class/net. I'll check it out.
Jemimah, my original request forwarded by pemasu

My original post requested 3G and Wifi signal strength [maybe both/selectable]...I don't know if that is possible, or if a dotpet could be made separate from frisbee?

http://www.murga-linux.com/puppy/viewtopic.php?t=76685

The reason for asking is there are many requests for help from people who are getting poor connections/dropouts or just bad download speeds, which often indicate poor signal strength, so an indicator/meter would be really useful, especially for 3G as a poor signal often causes switching from 3G 7.2mb/s down to 2G 768kb/s, whereas wifi tends to fluctuate between fast and not so fast, and signals are generally better due to close proximity
thanks

Aitch :)

Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

Bibletime

#1743 Post by Jim1911 »

Executing Bibletime on my Laptop results in the screen shown. It tries to start but just shows the blank square. It works fine on my desktop computer. Possibly the attached sys-report can give some insight into the problem.

Thanks,
Jim
Attachments
image-1.jpg
(13.89 KiB) Downloaded 843 times
sys-info-120311.gz
(9.83 KiB) Downloaded 180 times

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#1744 Post by Tman »

Jemimah,

Do you have a webkit-DEV-1.6.3 pet availiable?

User avatar
jemimah
Posts: 4307
Joined: Wed 26 Aug 2009, 19:56
Location: Tampa, FL
Contact:

#1745 Post by jemimah »

Tman wrote:Jemimah,

Do you have a webkit-DEV-1.6.3 pet availiable?
Yeah I just uploaded them.

User avatar
jemimah
Posts: 4307
Joined: Wed 26 Aug 2009, 19:56
Location: Tampa, FL
Contact:

#1746 Post by jemimah »

Aitch wrote:
Hmm, the tray doesn't run iwconfig, but I may be able to get the info from /sys/class/net. I'll check it out.
Jemimah, my original request forwarded by pemasu

My original post requested 3G and Wifi signal strength [maybe both/selectable]...I don't know if that is possible, or if a dotpet could be made separate from frisbee?

http://www.murga-linux.com/puppy/viewtopic.php?t=76685

The reason for asking is there are many requests for help from people who are getting poor connections/dropouts or just bad download speeds, which often indicate poor signal strength, so an indicator/meter would be really useful, especially for 3G as a poor signal often causes switching from 3G 7.2mb/s down to 2G 768kb/s, whereas wifi tends to fluctuate between fast and not so fast, and signals are generally better due to close proximity
thanks

Aitch :)
Hmm, I'm not sure if the kernel even knows that information. I'll look into it.

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#1747 Post by Tman »

jemimah wrote:
Tman wrote:Jemimah,

Do you have a webkit-DEV-1.6.3 pet availiable?
Yeah I just uploaded them.
Thanks, I wanted to try compiling something with it.

User avatar
antiloquax
Posts: 405
Joined: Fri 27 Jan 2012, 09:17

#1748 Post by antiloquax »

I have been working on a pet for Python3 with Pygame. I have a problem in that if I include SDL_image, I get an error when I build. But if I leave it out, Pygame can only import .bmp images.
I did get it to work in Racy 5.2.2 - just need to remember how!
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.

User avatar
DaveS
Posts: 3685
Joined: Thu 09 Oct 2008, 16:01
Location: UK

#1749 Post by DaveS »

Trick with Midori cache seems to be to set it to zero. It either understands zero or 'runaway' :)
Spup Frugal HD and USB
Root forever!

User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#1750 Post by 666philb »

Aitch wrote:
Hmm, the tray doesn't run iwconfig, but I may be able to get the info from /sys/class/net. I'll check it out.
Jemimah, my original request forwarded by pemasu

My original post requested 3G and Wifi signal strength [maybe both/selectable]...I don't know if that is possible, or if a dotpet could be made separate from frisbee?

http://www.murga-linux.com/puppy/viewtopic.php?t=76685

The reason for asking is there are many requests for help from people who are getting poor connections/dropouts or just bad download speeds, which often indicate poor signal strength, so an indicator/meter would be really useful, especially for 3G as a poor signal often causes switching from 3G 7.2mb/s down to 2G 768kb/s, whereas wifi tends to fluctuate between fast and not so fast, and signals are generally better due to close proximity
thanks

Aitch :)
hi aitch....this maybe what you're after,....
i don't have wireless so can't test it. however uperax on puppy chat, says it works and is good ..... http://bonrom.cbbknet.com/

pet attached

edit: original didn't work on saluki
Last edited by 666philb on Mon 12 Mar 2012, 10:52, edited 1 time in total.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331

Volhout
Posts: 547
Joined: Sun 28 Dec 2008, 08:41

wallpapers

#1751 Post by Volhout »

futwerk wrote:new backgrounds.
Hello futwerk,

I am a fan of your enhousiastic wallpapers, and you have created a lot of them. When I install them, and work with them for a while, I notice that they are quite colorfull, and have a tendency to "hide" the icons that I typically place a few on my desktop. With Xfce in Saluki, these icons also "seem" smaller (maybe simply because they are further appart) than in other puppies.

Do you have an idea for a wallpaper that is more plain in color, and maybe where the Saluki icon remains "shiny" but less prominent ?
It is difficult for me to describe (english is a foreign language for me) but I have attached a link to a picture that explains what I mean. Forget about the banana in the middle.

http://applewallpapers.net/view/radiance-1280x800.html

Regards,

Volhout

User avatar
Aitch
Posts: 6518
Joined: Wed 04 Apr 2007, 15:57
Location: Chatham, Kent, UK

#1752 Post by Aitch »

666philb

Ah yes RutilT....I'd forgotten about that....my intro to puppy back in April 2007 consisted of a long running battle to both comprehend the strange language of linux to a windoze 98 refugee, and setting up a wifi using RutilT as used to be in puppy 214R

a bit of history...support from HairyWill

http://www.murga-linux.com/puppy/viewtopic.php?t=16973

As I recall, I wasn't impressed

Basically all I'm after is maybe some text to display on the 'active interfaces' 2 monitors icon, when doing a mouseover that displays 3G or wifi signal strength, or a separate icon that does the same
As I understand it RutilT merely makes that info available IF YOU GO LOOKING FOR IT....which is not quite the same

The info I'd like to use is available [for wifi] in iwconfig:

wlan0 IEEE 802.11bg ESSID:"BTHomeHub2-CC8N"
Mode:Managed Frequency:2.442 GHz Access Point: 00:26:44:EE:xx:xx
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=33/70 Signal level=-77 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0


How to add it to the active interfaces info is what I'm after...thanks
Edit: went back to my original post, saw your post which led me here
http://murga-linux.com/puppy/viewtopic.php?t=76705
downloaded slacko dotpet and voila!

Now to figure out why my interface is fluctuating from 20% to 67% signal
thanks Phil! :D

Aitch :)
Last edited by Aitch on Mon 12 Mar 2012, 12:40, edited 1 time in total.

User avatar
mavrothal
Posts: 3096
Joined: Mon 24 Aug 2009, 18:23

#1753 Post by mavrothal »

Aitch wrote:
Hmm, the tray doesn't run iwconfig, but I may be able to get the info from /sys/class/net. I'll check it out.
Jemimah, my original request forwarded by pemasu

My original post requested 3G and Wifi signal strength [maybe both/selectable]...I don't know if that is possible, or if a dotpet could be made separate from frisbee?

http://www.murga-linux.com/puppy/viewtopic.php?t=76685

The reason for asking is there are many requests for help from people who are getting poor connections/dropouts or just bad download speeds, which often indicate poor signal strength, so an indicator/meter would be really useful, especially for 3G as a poor signal often causes switching from 3G 7.2mb/s down to 2G 768kb/s, whereas wifi tends to fluctuate between fast and not so fast, and signals are generally better due to close proximity
thanks

Aitch :)
I think that "cat /sys/calss/net/<iface>/wireless/link" should give the wifi signal strength. "AT+CSQ" to the proper /dev/ttyUSB, the GSM signal strength.Techno's simple icon tray could help with visualization. But I'm not sure how robustly you can detect these in all hardware settings. Specially for the 3G.
== [url=http://www.catb.org/esr/faqs/smart-questions.html]Here is how to solve your[/url] [url=https://www.chiark.greenend.org.uk/~sgtatham/bugs.html]Linux problems fast[/url] ==

User avatar
jemimah
Posts: 4307
Joined: Wed 26 Aug 2009, 19:56
Location: Tampa, FL
Contact:

#1754 Post by jemimah »

antiloquax wrote:I have been working on a pet for Python3 with Pygame. I have a problem in that if I include SDL_image, I get an error when I build. But if I leave it out, Pygame can only import .bmp images.
I did get it to work in Racy 5.2.2 - just need to remember how!
I think the package is bad. I'll upload a new one tonight.

User avatar
Aitch
Posts: 6518
Joined: Wed 04 Apr 2007, 15:57
Location: Chatham, Kent, UK

#1755 Post by Aitch »

3G update [as wifi now visible with RutilT]

There is an old program called Umtsmon, which appears unsupported since 2008, which apparently had that facility

http://sourceforge.net/projects/umtsmon/

any takers...?

Aitch :)

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#1756 Post by pemasu »

Mavrothal has followed the aufs3 udba=reval mailings.

http://sourceforge.net/mailarchive/foru ... aufs-users

All started with these posts about: Remount command with option udba=reval is hanging:
http://permalink.gmane.org/gmane.linux. ... .user/3744

I have noticed the problem addressed there but I didnt know the fixing patch has been applied to the latest aufs 3.2 version which has been released. Cut from aufs mailing list:
> > By the way, I am going to release the new version of aufs which contain the patch I've sent. I know the problem is not solved yet, but you can also try the new version.

I have tested with kernel 3.2.9 and your new AUFS release. Now the
remount times are good again.
Here with "find /usr":
# mount / -o remount,udba=notify; find /usr -type f &>/dev/null; time
mount / -o remount,udba=reval
real 0m0.196s
user 0m0.000s
sys 0m0.030s
And with "find /":
# mount / -o remount,udba=notify; find / -type f &>/dev/null; time mount
/ -o remount,udba=reval
real 0m0.301s
user 0m0.000s
sys 0m0.107s
/usr/local/petget/installpkg.sh has this for aufs:

Code: Select all

#now re-evaluate all the layers...
 if [ "`lsmod | grep '^aufs' `" != "" ];then #100426
  busybox mount -t aufs -o remount,udba=reval unionfs / #remount with faster evaluation mode.
  [ $? -ne 0 ] && logger -s -t "installpkg.sh" "Failed to remount aufs / with udba=reval"
 else
  mount -t unionfs -o remount,incgen unionfs /
 fi
 sync
fi
I suppose that recompiling the 3.2.8 kernel with this latest released aufs 3.2 would be good idea. I will start today.
Last edited by pemasu on Mon 12 Mar 2012, 21:35, edited 1 time in total.

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#1757 Post by pemasu »

Kernel-3.2.8-saluki has been recompiled by using latest aufs 3.2 version. No other changes.
Aufs3-util should be compiled using latest git also.

Download link: http://www.smokey01.com/pemasu/Saluki/k ... ixed-aufs/

User avatar
scabz
Posts: 364
Joined: Thu 30 Apr 2009, 18:14
Location: Tallahassee FL US
Contact:

#1758 Post by scabz »

i have one problem .thumbnails does not survive a reboot.
the issue is i go to a folder with pictures in it then saluki caches the thumbnails then i close the folder and reopen thumbnails are cached.
i reboot saluki and try folder again thumbnails are gone and have to be recached.

i have some folders with a extreme amount of pictures in them it takes a long time to look through these folders without cache working properly.

User avatar
jemimah
Posts: 4307
Joined: Wed 26 Aug 2009, 19:56
Location: Tampa, FL
Contact:

#1759 Post by jemimah »

pemasu wrote:Kernel-3.2.8-saluki has been recompiled by using latest aufs 3.2 version. No other changes.
Aufs3-util should be compiled using latest git also.

Download link: http://www.smokey01.com/pemasu/Saluki/k ... ixed-aufs/
Cool. I'll use the new one for the next release.

User avatar
jemimah
Posts: 4307
Joined: Wed 26 Aug 2009, 19:56
Location: Tampa, FL
Contact:

#1760 Post by jemimah »

scabz wrote:i have one problem .thumbnails does not survive a reboot.
the issue is i go to a folder with pictures in it then saluki caches the thumbnails then i close the folder and reopen thumbnails are cached.
i reboot saluki and try folder again thumbnails are gone and have to be recached.

i have some folders with a extreme amount of pictures in them it takes a long time to look through these folders without cache working properly.
The snapmerge script omits them to speed up saving.

If you want you can edit /usr/sbin/snapmergepuppy.

Go to line 135 and change

Code: Select all

grep -v -E -i '\.thumbnails|\.cache|\.trash|trash/|\.part$'
to

Code: Select all

 grep -v -E -i '\.cache|\.trash|trash/|\.part$'

Post Reply