Polarpup-005 with Qt4-4.8.0 and Gstreamer libs inbuild
Road tested Polar 5 today, it doesn't recognise my PCI wireless adapter-
Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
It also came up with an error before x-server starts, something like
FATAL: cannot load module usdhid
don't know if that's related.
I want to compile qtractor for polar as it already has qt built in.
Any suggestions appreciated . . .
Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
It also came up with an error before x-server starts, something like
FATAL: cannot load module usdhid
don't know if that's related.
I want to compile qtractor for polar as it already has qt built in.
Any suggestions appreciated . . .
This is the wireless device - its detect by Lucid 5.28 and 5.29
00:09.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
maybe its a missing driver
i think these are the modules in Lucid-
b43 132145 0
mac80211 123470 1 b43
cfg80211 98953 2 b43,mac80211
search b43 in system files reveals-
/lib/firmware/b43
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43/b43.ko
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43legacy
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43legacy/b43legacy.ko
/lib/modules/all-firmware/b43legacy.tar.gz
/lib/modules/all-firmware/b43.tar.gz
can I just copy these across?
00:09.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
maybe its a missing driver
i think these are the modules in Lucid-
b43 132145 0
mac80211 123470 1 b43
cfg80211 98953 2 b43,mac80211
search b43 in system files reveals-
/lib/firmware/b43
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43/b43.ko
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43legacy
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43legacy/b43legacy.ko
/lib/modules/all-firmware/b43legacy.tar.gz
/lib/modules/all-firmware/b43.tar.gz
can I just copy these across?
darkcity. No need. Your chip 14e4:4318 is one of those which /etc/init.d/BC-wl script unfortunately thinks that you will need wl driver. But you need b43.
So....simply remove /etc/init.d/BC-wl and reboot. After that b43 should be recognized and autoloaded.
That script just tries to recognize those broadcom chips which needs wl but it is not perfect.
So....simply remove /etc/init.d/BC-wl and reboot. After that b43 should be recognized and autoloaded.
That script just tries to recognize those broadcom chips which needs wl but it is not perfect.
Hey...that is great....to get Qtractor to compile...not bad at all.
I am not sure if the Pupshutdown has a option in the version I used in Polarpup. But if you download latest Pupshutdown...it surely has it. Also the cd asking is off as default in latest Pupshutdown. It should be behind settings icon again settings icon and the settings....setting 3 times...at least in this latest Pupshutdown.
I am not sure if the Pupshutdown has a option in the version I used in Polarpup. But if you download latest Pupshutdown...it surely has it. Also the cd asking is off as default in latest Pupshutdown. It should be behind settings icon again settings icon and the settings....setting 3 times...at least in this latest Pupshutdown.
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
Hi,
can we install BINO 3d player in polarpup ?
because i fail when i try to compile in lucid
http://208.109.22.214/puppy/viewtopic.p ... 9b3f9108b9
thanks
can we install BINO 3d player in polarpup ?
because i fail when i try to compile in lucid
http://208.109.22.214/puppy/viewtopic.p ... 9b3f9108b9
thanks
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
I test compiled Bino in Dpup Exprimo. It went fairly smoothly. The problem. Bino uses ffmpeg for video decoding and I am afraid my compiled ffmpeg-0.9.1-git version is not up to date for video decoding in this level.
It needs ffmpeg => 0.7 and it needs more video options enabled that I have.
So....I can start Bino...but my ffmpeg does not play anything. Bino crashes because of that.
I dont see any problems why it would not compile in Polarpup. I am not sure if Polarpup has definitive enough /etc/profile.d/qt4 exporting file for compiling Bino, but I can upload the working version today.
I just dont have time now to use Polarpup. Heavily attached to kernel compiling.
It needs ffmpeg => 0.7 and it needs more video options enabled that I have.
So....I can start Bino...but my ffmpeg does not play anything. Bino crashes because of that.
I dont see any problems why it would not compile in Polarpup. I am not sure if Polarpup has definitive enough /etc/profile.d/qt4 exporting file for compiling Bino, but I can upload the working version today.
I just dont have time now to use Polarpup. Heavily attached to kernel compiling.
Darkcity. Polarpup has the qt4 development stuff up to opengl and phonon-gstreamer...fair complete.
They are in devx sfs. But...I think you will need a little better exporting first.
Install the attached pet and and then in console: "source /etc/profile.d/qt4"
My previous version has not been definitive enough....for all qt4 application compiling. Some environments has not been able to find the right location.
Installing lucid qt4 is somewhat funny....when you have already full qt4 environment in distro. It just needs to be defined better.
They are in devx sfs. But...I think you will need a little better exporting first.
Install the attached pet and and then in console: "source /etc/profile.d/qt4"
My previous version has not been definitive enough....for all qt4 application compiling. Some environments has not been able to find the right location.
Installing lucid qt4 is somewhat funny....when you have already full qt4 environment in distro. It just needs to be defined better.
- Attachments
-
- qt4-devel-export-fix-0.0.1.pet
- (557 Bytes) Downloaded 837 times
Pemasu I am just too dense to get it so I ask.
You don't have to answer but the title is
Polarpup-005 with Qt4-4.8.0 and Gstreamer libs inbuild
I remember vaguely that you had Polarpup 15 or even later versions?
So is it something special with Polarpup-005
that let it work with Qt4-4.8.0 and Gstreamer libs and the later versions
being different?
As I remember Polarpup-005 had Lupu 513 as base and later versions
most likely where Lupu 525? or even 528? Or is it about what kernel
them use? No big deal just me curious. If it is a too heavy bad derail
then ignore it
Edit Much appreciated. sorry my poor memory mixed them up.
So Snow where up to snow 15 or beyond while Polarpup current version
are at polarpup 5 okay.
You don't have to answer but the title is
Polarpup-005 with Qt4-4.8.0 and Gstreamer libs inbuild
I remember vaguely that you had Polarpup 15 or even later versions?
So is it something special with Polarpup-005
that let it work with Qt4-4.8.0 and Gstreamer libs and the later versions
being different?
As I remember Polarpup-005 had Lupu 513 as base and later versions
most likely where Lupu 525? or even 528? Or is it about what kernel
them use? No big deal just me curious. If it is a too heavy bad derail
then ignore it
Edit Much appreciated. sorry my poor memory mixed them up.
So Snow where up to snow 15 or beyond while Polarpup current version
are at polarpup 5 okay.
Last edited by nooby on Mon 05 Mar 2012, 16:52, edited 2 times in total.
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
Nope. You mix the Ice Puppy, Snow Puppy and Polarpup versions. I havent retrograded Polarpup. 005 is the latest in this saga.
There isnt anything special in Polarpup. Just compiled the kernel, used the latest woof of that time, compiled and included full Qt4.
I have stepped out of Lucid Puppy development before 5.2 version. Playdayz stopped using woof upgrades and started to use some maverick libs and bins. So...you couldnt build Lucid Puppy anymore from net repo. I had to step out. I have had always pure Ubuntu Lucid Puppy...no upgraded libs or bins...only those which I have compiled in Polarpup or in my other Lucid Puplets.
So...My Lucid builds havent followed fully Playdayz work. But....I have followed the update processes keenly and I have picked up useful stuff all the time. So my builds have in big percent flavour of Lucid Puppies. Well....wm`s are JWM and Icewm...not openbox.
There isnt anything special in Polarpup. Just compiled the kernel, used the latest woof of that time, compiled and included full Qt4.
I have stepped out of Lucid Puppy development before 5.2 version. Playdayz stopped using woof upgrades and started to use some maverick libs and bins. So...you couldnt build Lucid Puppy anymore from net repo. I had to step out. I have had always pure Ubuntu Lucid Puppy...no upgraded libs or bins...only those which I have compiled in Polarpup or in my other Lucid Puplets.
So...My Lucid builds havent followed fully Playdayz work. But....I have followed the update processes keenly and I have picked up useful stuff all the time. So my builds have in big percent flavour of Lucid Puppies. Well....wm`s are JWM and Icewm...not openbox.
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
@pemasu
thanks, downloading eprimo...
I want to install ffmpeg from... http://www.murga-linux.com/puppy/viewtopic.php?t=57886
do you think it will work ?
thanks
thanks, downloading eprimo...
I want to install ffmpeg from... http://www.murga-linux.com/puppy/viewtopic.php?t=57886
do you think it will work ?
thanks
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
Not sure how working this compile is...or does it work with other ffmpeg version....but since I compiled it as test.....here you go...
I am sure you will need to install some missing libs...so launch it in console and start hunting.
libass...libopenal...libenca...maybe something else.
I am sure you will need to install some missing libs...so launch it in console and start hunting.
libass...libopenal...libenca...maybe something else.
- Attachments
-
- bino_DOC-1.2.1.pet
- (147.8 KiB) Downloaded 683 times
-
- bino_NLS-1.2.1.pet
- (59.35 KiB) Downloaded 673 times
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Thanks, Pemasu.
EDIT :
i run your compiled bino on 528, with libQT files (60 files) taken... i mean borrowed from other installed linux...
but then again, i failed to run windows-version-of-bino on my computer too... with same error
maybe hardware problem?
EDIT:
http://lists.gnu.org/archive/html/bino- ... 00088.html
- Attachments
-
- image-1.png
- (14.68 KiB) Downloaded 1312 times
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]