I am newbie from Indonesia ,I have a modem zte ac682 ,conecting to the internet is no problem to slaco, but I have to unmount :/de/sr1 then open terminal .
at terminal I should write " modprobe usbserial vendor+0x19d2 product=0xffdd.then I can connect and browsing .I need help in order
to not open terminal write that script.I hope some one help me to write what script that can connect aotumaticaly. Thanks
[solved]How to auto connect zte ac682 USB serial modem?
-
- Posts: 36
- Joined: Mon 07 Nov 2011, 15:45
- Location: Surabaya,indonesia
[solved]How to auto connect zte ac682 USB serial modem?
Last edited by gundul3l3k on Tue 15 Nov 2011, 12:57, edited 1 time in total.
Wired USB modem or wireless?
What version of Puppy?
Computer specifications?
Have you tried menu->setup->internet connection wizard?
Tried a different USB port?
Tried to get Puppy booted first and then plug in the modem?
What version of Puppy?
Computer specifications?
Have you tried menu->setup->internet connection wizard?
Tried a different USB port?
Tried to get Puppy booted first and then plug in the modem?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
-
- Posts: 36
- Joined: Mon 07 Nov 2011, 15:45
- Location: Surabaya,indonesia
zte ac 682 is dial up modem ,provide by my isp and lock ./dev/sro1 detect by windows automaticaly, but in slaco I have to do " eject,lsusb and modprobe. In my pc I have install groups "warry,slaco,ubuntu,dreamlinux,windows,bactrack.all of them I should do those scrips.Most Indonesian have same problem when connecting with this modem in linux. which or what scripts i should write on at /etc/bla bla wvdial.
I intent to migrate to puppy full install. help me with example scripts thanks.
I intent to migrate to puppy full install. help me with example scripts thanks.
gundul3l3k
Welcome to Puppy
As I read it you have to enterin a terminal.
One way you could achieve this is to put that line in /etc/rc.d/rc.local
This will ensure that this code runs every time you boot.
I hope this is what you need.
Welcome to Puppy
As I read it you have to enter
Code: Select all
modprobe usbserial vendor+0x19d2 product=0xffdd
One way you could achieve this is to put that line in /etc/rc.d/rc.local
Code: Select all
echo "modprobe usbserial vendor+0x19d2 product=0xffdd" >> /etc/rc.d/rc.local
I hope this is what you need.
Puppy Linux Blog - contact me for access
-
- Posts: 36
- Joined: Mon 07 Nov 2011, 15:45
- Location: Surabaya,indonesia
this is what i do in slaco to connect and reconnect my modem
1. in terminal i wrote : echo " eject /dev/sr1">> /etc/rc.d/rc.local
echo " modprobe usbserial vendor=0x19d2 product=0xffdd " >>/etc/rc.d/rc.local (before booting I plug my modem and the kernel modul detect usbserial ) in windows I just connected .it works well.
2. I wrote scrpt in tru gedit/nano :
# !/bin/bash
modprobe usbserial vendor=0x19d2 product=0xffdd then I save as /home/smart.sh, i did " chmod 775 /home/smart.sh ,then I drag it to windows to make sort cut >>>>> this is solving my problem when I unplug and replug modem...I just push the short cut and connect. ,thanks
1. in terminal i wrote : echo " eject /dev/sr1">> /etc/rc.d/rc.local
echo " modprobe usbserial vendor=0x19d2 product=0xffdd " >>/etc/rc.d/rc.local (before booting I plug my modem and the kernel modul detect usbserial ) in windows I just connected .it works well.
2. I wrote scrpt in tru gedit/nano :
# !/bin/bash
modprobe usbserial vendor=0x19d2 product=0xffdd then I save as /home/smart.sh, i did " chmod 775 /home/smart.sh ,then I drag it to windows to make sort cut >>>>> this is solving my problem when I unplug and replug modem...I just push the short cut and connect. ,thanks