Slacko Puppy 5.3.1

Please post any bugs you have found
Message
Author
User avatar
sc0ttman
Posts: 2812
Joined: Wed 16 Sep 2009, 05:44
Location: UK

#21 Post by sc0ttman »

Congrats!! Well done 01micko on a really great release - I downloaded as soon as you posted and have been using it all day, found no problems to report as such..

The 'nv' driver worked for me now, sound too, and also Nvidia-173 works fine :) Did not need Xvesa once :D

I think that the PPM, default repo, gtkdialog4, pmusic2, SlickPet etc, first boot friendliness and ease of use are great!!

It's a shame the defaults-changer is not installed, I missed it.. I thought that Barry added it to Woof, but I got a .pet lying around, so no problem for me..

Also, maybe you could cheat a little and re-upload the latest Puppyphone as psip-1.2RC.pet - so that SlickPet actually does download the very latest...
Last edited by sc0ttman on Tue 25 Oct 2011, 15:24, edited 1 time in total.
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]

User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

#22 Post by rjbrewer »

Xorg setup doesn't have i810 driver necessary for use
on my Dell Pentium M laptop.

Any resolution choice causes a narrowed screen.

Vesa causes system freeze.

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs

Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#23 Post by Jim1911 »

Jim1911 wrote:Congratulations Mick,

Frugal installation to an ext4 partition. I just upgraded my 4fs save file from RC2 and it works perfectly, although I had to manually choose the nividia driver. The problem I noted with RC2 has been corrected. Next is to upgrade my Full HD installation which will be my main pup.

Great, :D :D :D :D :D :D :D
Jim
It turns out that there is still a problem with shutdown on the version with Kernel 2.6.39.6. Above report was using Kernel 2.6.39.4. I tried copying /usr/sbin/shutdownconfig from the version that shutdown works on, however, the problem still exists. Otherwise the Kernel 2.6.39.6 version works great.

User avatar
jim3630
Posts: 791
Joined: Mon 14 Feb 2011, 02:21
Location: Northern Nevada

#24 Post by jim3630 »

installed 5.3pae frugal to ext4 on dual core p6100 hp. broadcom wifi driver auto-detected and connection made without issue with sns. mesa installed from slickpet.

everything tried works! including shutdown poweroff does poweroff.

# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
305 frames in 5.0 seconds = 60.840 FPS
303 frames in 5.0 seconds = 60.412 FPS
303 frames in 5.0 seconds = 60.412 FPS
303 frames in 5.0 seconds = 60.412 FPS
303 frames in 5.0 seconds = 60.412 FPS
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
after 3479 requests (3479 known processed) with 0 events remaining.
# uname -r
2.6.39.4
#
Attachments
slacko5.3res.png
(14.52 KiB) Downloaded 4071 times
slacko5.3-pae-reboot.after.install.png
(5.24 KiB) Downloaded 4225 times

KBD47
Posts: 48
Joined: Wed 27 Jul 2011, 18:57

I like, couple issues

#25 Post by KBD47 »

I really like Slacko. It feels polished, it has the option to use all available space on the save file, overall very nice. Two issues I've had with it. Usually touchpad on my netbook works pretty well with default puppy setting, but with slacko had to turn everything up because touchpad response and movement was terribly slow compared to other puppies. But that I could fix. Much bigger issue is that I cannot use my favorite browser, Chromium, very well. My download bar is invisible, hiding behind puppy's toolbar at the bottom. Also blocking my down arrow button for scrolling down the page. That is the one real problem I found. Otherwise it looks good.
KBD
edit--forget the Chromium thing. It seems that Chromium installs and opens fully maximized and that hides the lower portion of the controls, just needs to be maximized at normal.
Last edited by KBD47 on Tue 25 Oct 2011, 23:37, edited 1 time in total.

KBD47
Posts: 48
Joined: Wed 27 Jul 2011, 18:57

#26 Post by KBD47 »

Seems the extra deja vu fonts are not in the repository, unable to download.
Also would be nice to have the liberty fonts.

mave
Posts: 129
Joined: Thu 02 Apr 2009, 13:42
Location: Germany

Issue with localized keyboard layout

#27 Post by mave »

Hi,

reported this for Slacko B4 before http://murga-linux.com/puppy/viewtopic. ... 542#567542, same in Slacko 5.3 (THANKS 01micko, great!):

Booting an installing (pupsave file okay). Setting to german language and keyboard layout.

Now: every boot LANG=de.UTF-8 but keyboard layout is US. After restarting X, german keyboard layout is available. Next start: again the same...

I'm not familiar with the system callings (init.d). Can't say, if for example /etc/profile is going correct at boot time.

Ideas?

mave

User avatar
Geoffrey
Posts: 2355
Joined: Sun 30 May 2010, 08:42
Location: Queensland

#28 Post by Geoffrey »

gcmartin:

In response to your personal message, I have tested the Talking Clock script with Slacko but had a problem which I have now fixed.

It now functions correctly, it can be downloaded at http://www.murga-linux.com/puppy/viewto ... 453#571453.

Please try it I think you will like this, it's in keeping with puppy with simplicity and small size and feel free to modify it to suit you needs.

Geoffrey

User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

#29 Post by Q5sys »

AWESOME!

Mirror up to help with the first wave of people wanting to download. GO HERE

(it'll be up by Midnight EST)

2byte
Posts: 353
Joined: Mon 09 Oct 2006, 18:10

#30 Post by 2byte »

/var/log/messages
user.warn kernel: [ 42.586133] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
daemon.notice modprobe: FATAL: Error running install command for sound_slot_0

Audio device : ATI Technologies Inc Device 1714
Onboard a Gigabyte GA-A75M-UD2H motherboard.

This is the only thing I'm having trouble with. Tried both sound wizards. Any suggestions please?
Last edited by 2byte on Wed 26 Oct 2011, 04:19, edited 1 time in total.


User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#31 Post by James C »

Fresh manual frugal install of Slacko 530 (2.6.37.6) on my old P3 test box.No problems.

# report-video
VIDEO REPORT: Slacko Puppy, version 5.3

Chip description:
00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)
00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03)

Driver used by Xorg:
intel

Video mode used by Xorg:
Resolution: "" Depth: Depth 24

...the above also recorded in /tmp/report-video

# glxgears
191 frames in 5.0 seconds = 38.164 FPS
209 frames in 5.0 seconds = 41.490 FPS
211 frames in 5.0 seconds = 41.968 FPS
207 frames in 5.0 seconds = 41.240 FPS
208 frames in 5.0 seconds = 41.580 FPS


-Computer-
Processor : Pentium III (Coppermine)
Memory : 254MB (116MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Tue 25 Oct 2011 11:03:43 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Software Rasterizer
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801AA-ICH

-Version-
Kernel : Linux 2.6.37.6 (i686)
Compiled : #1 SMP Sun Jul 10 08:27:28 EST 2011
C Library : GNU C Library version 2.13 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution

# free
total used free shared buffers
Mem: 254128 247200 6928 0 26564
Swap: 1020092 80 1020012
Total: 1274220 247280 1026940
#

2byte
Posts: 353
Joined: Mon 09 Oct 2006, 18:10

#32 Post by 2byte »

PAE-HIGHMEM kernel 2.6.39.4 ( thanks for that info James C )

# free
total used free shared buffers
Mem: 7787828 710688 7077140 0 42508
Swap: 0 0 0
Total: 7787828 710688 7077140

#report-video-glx
Tue 25 Oct 2011 Operating System: Slacko Puppy-5.3 Linux 2.6.39.4
1.0 VGA compatible controller: ATI Technologies Inc Device 9640
oem: AMD ATOMBIOS product: SUMO 01.00

X Server: Xorg Driver: fglrxdrm: vendor=FireGL - ATI Technologies Inc.
X.Org version: 1.9.5
dimensions: 1680x1050 pixels (444x277 millimeters)
depth of root window: 24 planes

AMD A8-3850 APU with Radeon(tm) HD Graphics
Core 0: 2899 1: 2899 2: 2899 3: 2899 MHz

# glxgears
36710 frames in 5.0 seconds = 7341.903 FPS
38253 frames in 5.0 seconds = 7650.528 FPS
38205 frames in 5.0 seconds = 7640.959 FPS
38283 frames in 5.0 seconds = 7656.211 FPS

This is with the ati-fglrx pet installed.


User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#33 Post by bigpup »

The tray clock.
Best I can find is it is a 24 hr clock setting only.
I guess you will need to install a different clock program.
Like Pupclockset
http://www.murga-linux.com/puppy/viewtopic.php?t=61633
Last edited by bigpup on Wed 26 Oct 2011, 19:22, edited 1 time in total.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)

rameshiyer

ICOn Missing

#34 Post by rameshiyer »

I have installed Slack Puppy 5.3 on hard disk ( frugal). After rebooting, I have missed desktop application Icons and Hard drive partition Icons. It just shows Triangle in the place of programs, etc. How to restore the programs Icons. I have noticed this problem in Warry 5.2 also. Please help me.

Ramachandran
Calicut

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#35 Post by 01micko »

rameshiyer

run this in a terminal

Code: Select all

gdk-pixbuf-query-loaders --update-cache
restart X
Puppy Linux Blog - contact me for access

cthisbear
Posts: 4422
Joined: Sun 29 Jan 2006, 22:07
Location: Sydney Australia

#36 Post by cthisbear »


Sylvander
Posts: 4416
Joined: Mon 15 Dec 2008, 11:06
Location: West Lothian, Scotland, UK

#37 Post by Sylvander »

1. Updated to Slacko-5.3 from Slacko-5.2.97-k2.6.37.6-smp
The update went smoothly, the new Slacko is looking good and working well, except...

2. Psip32 version 1.2 freezes if/when I attempt to configure it for use.
I'm using 8-year-old desktop hardware [ASUS A7A266 mobo].

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#38 Post by 01micko »

cthisbear wrote:Doing my bit.

http://forums.whirlpool.net.au/forum-re ... ?t=1801436

Chris.
'bout time..

In other news... scoop on the high tech lab,,


Image



8)
Puppy Linux Blog - contact me for access

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#39 Post by Lobster »

scoop on the high tech lab


Ah the new Puppy developer is hard at compiling . . .
8)

I had a go compiling this browser
http://www.glennmcc.org/aralinux/

. . . gave up during dependency training
. . . better leave it to the smart pups and their new fangled
green computers . . . :wink:
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
jim3630
Posts: 791
Joined: Mon 14 Feb 2011, 02:21
Location: Northern Nevada

#40 Post by jim3630 »

installled 5.3- 2.6.37.6 pfix=ram, manual frugal to ext4 on dell d610 pentium m. auto-connected to wifi detecting broadcom b43 driver made connection without issue using sns.

the save file does need to be on same partition. first save placed on another partition and it crashed on reboot unable to find the save file. sound, vidio, everything tried works.
Attachments
hardinfo_report.html.gz
(58.55 KiB) Downloaded 765 times
2.6.37.6 install.after.reboot.png
(12.05 KiB) Downloaded 1618 times

Post Reply