Guy Dog 5.0.1

For talk and support relating specifically to Puppy derivatives
Message
Author
User avatar
tubeguy
Posts: 1320
Joined: Sat 29 Aug 2009, 01:04
Location: Park Ridge IL USA
Contact:

#41 Post by tubeguy »

johnnywinner wrote:
tubeguy wrote:I have found that right-clicking an app in the task bar closes it. Is that the intended behavior?
It is, but you can change it. The setting is at line 83 in /root/.config/tint2/tint2rc, "mouse_right = close". The available settings are explained at the link below.

http://code.google.com/p/tint2/wiki/Configure#Mouse_action_on_task

tubeguy wrote:Also how do I switch between desktops?
Ctrl-Alt-Left Arrow or Right Arrow or scrolling on the desktop are two ways.
Thank you!!
[b]Tahr Pup 6 on desktop, Lucid 3HD on lappie[/b]

pacer106
Posts: 360
Joined: Tue 11 Jan 2011, 18:42

#42 Post by pacer106 »

not completely happy with this but here is my idea.

Image
guydog1 by J. P. Stunna, on Flickr

User avatar
mikeslr
Posts: 3890
Joined: Mon 16 Jun 2008, 21:20
Location: 500 seconds from Sol

Can not achieve desktop with Ati Radeo 3100 Graphics

#43 Post by mikeslr »

Hi iguleder & All:

I'm really disappointed that I am unable to explore what looks to be an exciting puplet. My system uses Ati Radeon 3100 graphics. Trying probe, it tests OK, but clicking "finish" results in "No Signal" being reported by my monitor. Trying Chose, tests OK, but drops me back to "type xwin", which fails. Selecting vesa does the same.
In the early development of Slacko, iguleder's dpup and Exprimo, adding "pfix=radeon.modeset=0" enabled me to obtain a working desktop; but doing so for Guydog produced the same results as above.

mikesLr

Edit: Ignore above (':oops:')
See http://www.murga-linux.com/puppy/viewto ... 307#574307
Last edited by mikeslr on Tue 18 Oct 2011, 23:29, edited 1 time in total.

roadkill13
Posts: 154
Joined: Wed 10 Aug 2011, 21:41
Location: United States
Contact:

No Joy on Acer D255

#44 Post by roadkill13 »

Did manual frugal install and booted to desktop without incident. Setup networking. A dialogue box popped up asking to download flash player. So I downloaded flash player but did nothing else.

Created save file and rebooted. Desktop locks up as soon as X loads after booting with save file. No mouse, no hot keys. Had to cold cock it and restart. Rebooted without incident. Don't know what caused that. Like the look and layout of this puplet.

User avatar
mikeslr
Posts: 3890
Joined: Mon 16 Jun 2008, 21:20
Location: 500 seconds from Sol

Pmount on Wbar = Desktop Drive Icon Workaround

#45 Post by mikeslr »

Hi iguleder & all,

I guess I really did want to explore Guydog. See prior post. My right-brain tossed up the idea, "Why not try it on your Thinkpad T42?" Holding my breath as I clicked thru Xorgwizard --my T42 also uses Radeon Graphic, albeit 7500-- it gave me a desktop before I passed out.

Regarding the absence of desktop drive icons, I supposed a workaround would be to add pmount to Wbar. As Wbar config didn't seem to accept the non-png icon associated with pmount, I gave it the attached, which I stole from some collection of icons and re-labeled.

Damn! Now I'll have to figure out how to work without rox-filer as the default file manager.

mikesLr

p.s. Love the wbar config app. It's subjective, but Guydog may be the fastest puppy I've tried on the T42.
Attachments
pmount.png
(31.07 KiB) Downloaded 2003 times
Last edited by mikeslr on Wed 19 Oct 2011, 23:00, edited 1 time in total.

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#46 Post by Tman »

mikesir,

Nice icon. I prefer Rox-Filer, so I installed the one from the lucid repo.
But typing rox in the terminal still activates Emelfm2. To get rox-fiiler working, you need to remove or rename /usr/bin/rox. That's the one that links to emelfm2.

There is a command for the real Rox-Filer in /usr/local/bin/rox. Not sure if it is added after you install Rox-Filer, or if it was there already.

User avatar
puppyiso
Posts: 594
Joined: Tue 13 Jan 2009, 02:27

#47 Post by puppyiso »

tubeguy, Thank you so much. I have downloaded.

User avatar
Iguleder
Posts: 2026
Joined: Tue 11 Aug 2009, 09:36
Location: Israel, somewhere in the beautiful desert
Contact:

#48 Post by Iguleder »

I'm already beyond the planning phase of 5.0.1 :lol:

I want this to be a bug-fix release.

Features so far:
- Network manager fix (upstream, by Barry)
- Findwild instead of Searchmonkey
- pacer106's wallpaper (well, pacer106)
- Something I'm investigating at the moment: default MIME-type handlers for emelFM2

EDIT: wow, it's amazing how ugly it is. All emelFM2's configuration is stored in a C file and gets printed with lots of unneeded calls to functions. I'm trying to create a huge patch for this file (well, that's the only way to do this) with sane defaults.
[url=http://dimakrasner.com/]My homepage[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]

pacer106
Posts: 360
Joined: Tue 11 Jan 2011, 18:42

#49 Post by pacer106 »

Good morning, afternoon, or evening to all pupfans :)

Iguleder I am in the process of making a few more wallpapers for guydog :) im hopin to have somethin a bit better looking then the 1 posted yesterday.

Looking forward to the bugfix release :)

pacer106
Posts: 360
Joined: Tue 11 Jan 2011, 18:42

#50 Post by pacer106 »

I am a little happier with these.

Image
guydog2 by J. P. Stunna, on Flickr

Image
guydog3 by J. P. Stunna, on Flickr

User avatar
tasmod
Posts: 1460
Joined: Thu 04 Dec 2008, 13:53
Location: North Lincolnshire. UK
Contact:

#51 Post by tasmod »

Just observations. Not deep criticisms.

Frugal install went well. Still a 'raw' system, that's to say no autodetect of locale etc.
This goes along with most Puppys nowadays. I'm still surprised any Puppy hasn't turned to a dog yet, they still don't seem to have grown up like other distros.

Not really sure where you're going with this, I know it's early days but it's not really intuitive or easy to use. More of a 'seasoned' user/geek than a nooby type of system.

For a new user the idea of pmount drives first, emelfm next, then /mnt to get to drives content and then find out how to install a pet is a bit longwinded. Same goes for auto detection of network and connection.

Unless I'm missing something. :?

Guess most users automatically load, then immediately customise, so a wallpaper changer not in the default is perhaps a bit remiss.

EDIT: Sorry, I suspect my comments don't really apply after having re-read your mission statement.
Rob
-
The moment after you press "Post" is the moment you actually see the typso 8)

User avatar
mikeslr
Posts: 3890
Joined: Mon 16 Jun 2008, 21:20
Location: 500 seconds from Sol

Rox-filer & pmount & guydog3

#52 Post by mikeslr »

Thanks Tman for the info re Rox-filer.

tazmod - I was please to discover that clicking pmount, then clicking a drive/partition not only mounts the partition but opens it in a window. Not quite as elegant as clicking the drive icon on the desktop with rox-filer set to provide desktop drive icons: 2 clicks rather than one. But not particularly awkward. And for those who really want a "clean desktop" it has an advantage once pmount is added to wbar. As I haven't used wbar in a while, and currently not on my Thinkpad, I don't recall if wbar is set to auto-hide/pop-up over other applications so that it displays over opened applications. If not, some way to reach it without having to minimize windows would be required. ? Gadget on the Taskbar ?

pacer106 - just wanted to tell you that I appreciate your efforts. Guydog3 is stunning.

Thanks

MikesLr
Last edited by mikeslr on Sun 16 Oct 2011, 15:33, edited 1 time in total.

pacer106
Posts: 360
Joined: Tue 11 Jan 2011, 18:42

#53 Post by pacer106 »

Thanks mikeslr :)

Here is another. My favorite so far.

Image
guydog4 by J. P. Stunna, on Flickr

pacer106
Posts: 360
Joined: Tue 11 Jan 2011, 18:42

#54 Post by pacer106 »

One more a little on the darker side.

Image
guydog5 by J. P. Stunna, on Flickr

User avatar
tubeguy
Posts: 1320
Joined: Sat 29 Aug 2009, 01:04
Location: Park Ridge IL USA
Contact:

#55 Post by tubeguy »

Guydog wall.

Clip art is free from here:
http://dragonartz.wordpress.com/2008/09 ... og-vector/
Attachments
guydog1600x1200_2.jpg
version 2
(119.34 KiB) Downloaded 347 times
guydog1680x1050_2.jpg
version 2
(117.64 KiB) Downloaded 318 times
guydog600.jpg
(21.51 KiB) Downloaded 1369 times
guydog1680x1050.jpg
(106.35 KiB) Downloaded 311 times
guydog1600x1200.jpg
(107.63 KiB) Downloaded 324 times
Last edited by tubeguy on Thu 20 Oct 2011, 21:46, edited 1 time in total.
[b]Tahr Pup 6 on desktop, Lucid 3HD on lappie[/b]

stu90

Re: Rox-filer & pmount & guydog3

#56 Post by stu90 »

mikeslr wrote:Thanks Tman for the info re Rox-filer.

tazmod - I was please to discover that clicking pmount, then clicking a drive/partition not only mounts the partition but opens it in a window. Not quite as elegant as clicking the drive icon on the desktop with rox-filer set to provide desktop drive icons: 2 clicks rather than one. But not particularly awkward. And for those who really want a "clean desktop" it has an advantage once pmount is added to wbar. As I haven't used wbar in a while, and currently not on my Thinkpad, I don't recall if wbar is set to auto-hide/pop-up over other applications so that it displays over opened applications. If not, some way to reach it without having to minimize windows would be required. ? Gadget on the Taskbar ?

pacer106 - just wanted to tell you that I appreciate your efforts. Guydog3 is stunning.

Thanks

MikesLr
Hi mikeslr,
I think there is a bug with the latest version of wbar that stops it appearing above other applications.

User avatar
petihar
Posts: 366
Joined: Mon 09 Apr 2007, 12:04

fr keyboard doesn't work

#57 Post by petihar »

Hello,
Great job, try in frugal, but It seems french keyboard "azerty" does not work....?
petihar

gcmartin

DEsktop setup

#58 Post by gcmartin »

tasmod wrote: ... that's to say no autodetect of locale etc.
...
1st
I have seen this too.

But, to solve the issues of system start and system variable settings, maybe @Iguleder is planning along with Barry in using Shinobar's FirstRUN (Personalize Settings). Others, also, have used this to system setup after reaching X desktop. It has multiple merit is addition to the one you mention.

Just a guess at what's gong on behind the scenes as improvements and adjustments are made.

2nd
Sorry for an earlier report . woof-woof works.

3rd
Desktop backgrounds I see here on this thread...."Beautifully Stunning!" (Wow, this is another example of the diverse talents we have across the forum and the marvelous contributions made")

This distro is another outstanding contribution.
Last edited by gcmartin on Sun 16 Oct 2011, 17:18, edited 2 times in total.

Payoon
Posts: 32
Joined: Wed 26 May 2010, 15:40
Location: Duisburg, Germany on the banks of the Rhine

NV Driver for Guy Dog

#59 Post by Payoon »

Hi Iguleder,
this new puppy ( with openbox,debian, tiny and fast) is what I always wanted.
I have though a problem with getting Xorg to work with my NVidia 7300 LE graphics card. Even if I select the NV driver manually I can see that Guy Dog wants to use fbdev instead. So everything ends at the autologin hash.
Do You or anyone else have an idea how to solve this?

Thanks in advance

Payoon

pacer106
Posts: 360
Joined: Tue 11 Jan 2011, 18:42

#60 Post by pacer106 »

I did some revamping of the invisible dog & I think it looks a bit better myself.

Image
guydog6 by J. P. Stunna, on Flickr

Post Reply