Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Fri 25 Jul 2014, 21:27
All times are UTC - 4
 Forum index » Advanced Topics » Puppy Derivatives
Polarpup-005 with Qt4-4.8.0 and Gstreamer libs inbuild
Moderators: Flash, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 20 of 34 [498 Posts]   Goto page: Previous 1, 2, 3, ..., 18, 19, 20, 21, 22, ..., 32, 33, 34 Next
Author Message
pemasu


Joined: 08 Jul 2009
Posts: 5463
Location: Finland

PostPosted: Fri 26 Aug 2011, 01:21    Post subject:  

Marco07. Good find. You do valuable bug hunting. Thank you.
I know the reason. Notify-send and its framework does not work. I have removed those scripts which perform same things and the lid.sh script relies on notify-send and its working.
I checked and notify-send wants more libs, dont know yet how much.
I think that I go through all the /etc/acpi scripts and remove the notify-send part from them. I probably dont want all the extra libs included which are needed for simple message sending.
I will upload the updated acpi scripts pet when I am ready.
Back to top
View user's profile Send private message 
marco07

Joined: 18 Jan 2011
Posts: 176
Location: Lincoln , NE, USA

PostPosted: Fri 26 Aug 2011, 07:40    Post subject:  

Thanks! Looking forward to updater .pet package.
BTW, I got the audio back functioning in LO Impress by installing both gstreamer bad and ugly from ubantu multiverse repo. The Bad one needed quite a few libs file, but fortunately was installed Ok.
Now, if I get the updater for the lid close correcting the lid close suspend, then this would be a perfect OS on my Thinkpad R60.
Back to top
View user's profile Send private message 
pemasu


Joined: 08 Jul 2009
Posts: 5463
Location: Finland

PostPosted: Fri 26 Aug 2011, 10:01    Post subject:  

I have now stripped the /etc/acpi/ scripts so that they dont depend on libnotify-send binary and additional libs framework needed for it.
Scripts works as before.
Affected scripts are lid.sh, wlan.sh, sleep.sh and hibernate.sh. I have tested all of them. Lid close suspends to ram, hibernate script suspends to the disk, sleep.sh suspends to ram. Wlan.sh script disables or enables the wlan depending on command.
Attached pet overwrites those scripts. Nothing else.
etc-acpi-scripts-fix-0.0.1.pet
Description 
pet

 Download 
Filename  etc-acpi-scripts-fix-0.0.1.pet 
Filesize  1.44 KB 
Downloaded  135 Time(s) 
Back to top
View user's profile Send private message 
marco07

Joined: 18 Jan 2011
Posts: 176
Location: Lincoln , NE, USA

PostPosted: Fri 26 Aug 2011, 17:40    Post subject:  

pemasu:
Thanks for the updater. The suspend issue is now resolved. I like polar puppy 004 and am now enjoying it.
Back to top
View user's profile Send private message 
pemasu


Joined: 08 Jul 2009
Posts: 5463
Location: Finland

PostPosted: Fri 26 Aug 2011, 17:59    Post subject:  

You are welcome. Please, post again if you find something non working. I will reupload Polarpup-004 again quite soon with found bugs fixed...If I can....
Back to top
View user's profile Send private message 
eztuxer


Joined: 06 Nov 2008
Posts: 483
Location: Belgium

PostPosted: Sun 28 Aug 2011, 15:45    Post subject:  

So, here we go again with my messy rt2870sta wifi driver module problem.

I hope this will help.

Code:
sh-4.1# dmesg
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.39 (root@puppypc) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Thu Jul 14 19:40:27 GMT-8 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf6e0000 (usable)
[    0.000000]  BIOS-e820: 00000000cf6e0000 - 00000000cf6ed000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cf6ed000 - 00000000cf700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI present.
[    0.000000] DMI: FUJITSU SIEMENS ESPRIMO E           /D2164-A1, BIOS 5.00 R1.10.2164.A1               05/08/2006
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0xcf6e0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF0000000 write-back
[    0.000000]   3 base 0CF700000 mask FFFF00000 uncachable
[    0.000000]   4 base 0CF800000 mask FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f75a0] f75a0
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[    0.000000] ACPI: RSDP 000f7600 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT cf6e84b6 0005C (v01 PTLTD  ? XSDT   00050000  LTP 00000000)
[    0.000000] ACPI: FACP cf6e8586 000F4 (v03 FSC             00050000      000F4240)
[    0.000000] ACPI: DSDT cf6e867a 0453F (v01 FSC    D2151    00050000 MSFT 02000002)
[    0.000000] ACPI: FACS cf6edfc0 00040
[    0.000000] ACPI: ASF! cf6ecbb9 00085 (v16 OEMID  OEMTBL   00050000 PTL  00000001)
[    0.000000] ACPI: SSDT cf6ecc3e 0017C (v01 FSC    EISTCPU0 00050000  CSF 00000001)
[    0.000000] ACPI: SSDT cf6ecdba 0017C (v01 FSC    EISTCPU1 00050000  CSF 00000001)
[    0.000000] ACPI: MCFG cf6ecf36 00040 (v01 PTLTD    MCFG   00050000  LTP 00000000)
[    0.000000] ACPI: APIC cf6ecf76 00062 (v01 FSC    ? APIC   00050000  CSF 00000000)
[    0.000000] ACPI: BOOT cf6ecfd8 00028 (v01 PTLTD  $SBFTBL$ 00050000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2430MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000cf6e0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000cf6e0
[    0.000000] On node 0 totalpages: 849519
[    0.000000] free_area_init_node: node 0, pgdat c1482e40, node_mem_map f5e0d200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4862 pages used for memmap
[    0.000000]   HighMem zone: 617444 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0xf008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f5800000 s24704 r0 d24448 u2097152
[    0.000000] pcpu-alloc: s24704 r0 d24448 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 842881
[    0.000000] Kernel command line: video=640x480 root=/dev/sda4 ro
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:000cf6e0)
[    0.000000] Memory: 3364980k/3398528k available (3283k kernel code, 33096k reserved, 1352k data, 456k init, 2489224k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc1488000 - 0xc14fa000   ( 456 kB)
[    0.000000]       .data : 0xc1334d62 - 0xc1487080   (1352 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1334d62   (3283 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2992.516 MHz processor.
[    0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 5987.40 BogoMIPS (lpj=9975053)
[    0.003343] pid_max: default: 32768 minimum: 301
[    0.003383] Mount-cache hash table entries: 512
[    0.003560] CPU: Physical Processor ID: 0
[    0.003563] CPU: Processor Core ID: 0
[    0.003566] mce: CPU supports 4 MCE banks
[    0.003581] CPU0: Thermal monitoring enabled (TM1)
[    0.003586] using mwait in idle threads.
[    0.006900] ACPI: Core revision 20110316
[    0.010055] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.010374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.044636] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[    0.046664] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.046664] ... version:                0
[    0.046664] ... bit width:              40
[    0.046664] ... generic registers:      18
[    0.046664] ... value mask:             000000ffffffffff
[    0.046664] ... max period:             0000007fffffffff
[    0.046664] ... fixed-purpose events:   0
[    0.046664] ... event mask:             000000000003ffff
[    0.046664] CPU 1 irqstacks, hard=f5464000 soft=f5466000
[    0.046664] Booting Node   0, Processors  #1 Ok.
[    0.046664] smpboot cpu 1: start_ip = 9b000
[    0.006666] Initializing CPU#1
[    0.140009] Brought up 2 CPUs
[    0.140015] Total of 2 processors activated (11974.50 BogoMIPS).
[    0.140891] PM: Registering ACPI NVS region at cf6ed000 (77824 bytes)
[    0.141846] NET: Registered protocol family 16
[    0.141939] EISA bus registered
[    0.141948] ACPI: bus type pci registered
[    0.142007] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
[    0.142011] PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
[    0.142017] PCI: not using MMCONFIG
[    0.143443] PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=11
[    0.143447] PCI: Using configuration type 1 for base access
[    0.145419] bio: create slab <bio-0> at 0
[    0.146928] ACPI: EC: Look up EC in DSDT
[    0.150052] ACPI: Interpreter enabled
[    0.150062] ACPI: (supports S0 S1 S3 S4 S5)
[    0.150094] ACPI: Using IOAPIC for interrupt routing
[    0.155615] ACPI: No dock devices found.
[    0.155622] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.155743] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.155958] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.155963] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.155969] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.155975] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[    0.155980] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[    0.155983] pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfedfffff] (ignored)
[    0.155987] pci_root PNP0A08:00: host bridge window [mem 0xfef00000-0xffafffff] (ignored)
[    0.155991] pci_root PNP0A08:00: host bridge window [mem 0xffc00000-0xffefffff] (ignored)
[    0.156004] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600
[    0.156056] pci 0000:00:02.0: [8086:2772] type 0 class 0x000300
[    0.156071] pci 0000:00:02.0: reg 10: [mem 0xf0080000-0xf00fffff]
[    0.156079] pci 0000:00:02.0: reg 14: [io  0x2000-0x2007]
[    0.156087] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref]
[    0.156095] pci 0000:00:02.0: reg 1c: [mem 0xf0040000-0xf007ffff]
[    0.156139] pci 0000:00:02.1: [8086:2776] type 0 class 0x000380
[    0.156151] pci 0000:00:02.1: reg 10: [mem 0xf0100000-0xf017ffff]
[    0.156242] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.156261] pci 0000:00:1b.0: reg 10: [mem 0xf0000000-0xf0003fff 64bit]
[    0.156325] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.156330] pci 0000:00:1b.0: PME# disabled
[    0.156352] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.156416] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.156421] pci 0000:00:1c.0: PME# disabled
[    0.156446] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[    0.156513] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.156518] pci 0000:00:1c.1: PME# disabled
[    0.156543] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[    0.156608] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.156613] pci 0000:00:1c.2: PME# disabled
[    0.156637] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[    0.156709] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.156714] pci 0000:00:1c.3: PME# disabled
[    0.156742] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.156789] pci 0000:00:1d.0: reg 20: [io  0x2400-0x241f]
[    0.156825] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.156871] pci 0000:00:1d.1: reg 20: [io  0x2800-0x281f]
[    0.156905] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.156952] pci 0000:00:1d.2: reg 20: [io  0x2c00-0x2c1f]
[    0.156987] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.157035] pci 0000:00:1d.3: reg 20: [io  0x3000-0x301f]
[    0.157082] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.157103] pci 0000:00:1d.7: reg 10: [mem 0xf0004000-0xf00043ff]
[    0.157177] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.157183] pci 0000:00:1d.7: PME# disabled
[    0.157202] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.157273] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[    0.157367] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.157376] pci 0000:00:1f.0: quirk: [io  0xf000-0xf07f] claimed by ICH6 ACPI/GPIO/TCO
[    0.157382] pci 0000:00:1f.0: quirk: [io  0xf180-0xf1bf] claimed by ICH6 GPIO
[    0.157387] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 00ff)
[    0.157430] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[    0.157448] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
[    0.157458] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
[    0.157468] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
[    0.157479] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
[    0.157491] pci 0000:00:1f.2: reg 20: [io  0x3800-0x380f]
[    0.157525] pci 0000:00:1f.2: PME# supported from D3hot
[    0.157530] pci 0000:00:1f.2: PME# disabled
[    0.157547] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.157605] pci 0000:00:1f.3: reg 20: [io  0x3400-0x341f]
[    0.157689] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    0.157695] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.157701] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.157710] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.157784] pci 0000:05:00.0: [14e4:1677] type 0 class 0x000200
[    0.157810] pci 0000:05:00.0: reg 10: [mem 0xf0200000-0xf020ffff 64bit]
[    0.157912] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.157919] pci 0000:05:00.0: PME# disabled
[    0.157932] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.157944] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[    0.157950] pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
[    0.157956] pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.157963] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.158012] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[    0.158017] pci 0000:00:1c.2:   bridge window [io  0xf000-0x0000] (disabled)
[    0.158023] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.158033] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.158083] pci 0000:00:1c.3: PCI bridge to [bus 09-09]
[    0.158089] pci 0000:00:1c.3:   bridge window [io  0xf000-0x0000] (disabled)
[    0.158097] pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.158106] pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.158156] pci 0000:0b:07.0: [1814:0301] type 0 class 0x000280
[    0.158178] pci 0000:0b:07.0: reg 10: [mem 0xf0300000-0xf0307fff]
[    0.158294] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
[    0.158300] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.158307] pci 0000:00:1e.0:   bridge window [mem 0xf0300000-0xf03fffff]
[    0.158315] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.158320] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.158326] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.158354] pci_bus 0000:00: on NUMA node 0
[    0.158359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.158553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT]
[    0.158623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT]
[    0.158692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXD._PRT]
[    0.158760] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXE._PRT]
[    0.158849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
[    0.163687] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    0.163770] ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 *11)
[    0.163851] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[    0.163931] ACPI: PCI Interrupt Link [LNKD] (IRQs *9 10 11)
[    0.164011] ACPI: PCI Interrupt Link [LNKE] (IRQs *9 10 11)
[    0.164091] ACPI: PCI Interrupt Link [LNKF] (IRQs 9 10 11) *5
[    0.164172] ACPI: PCI Interrupt Link [LNKG] (IRQs 9 *10 11)
[    0.164253] ACPI: PCI Interrupt Link [LNKH] (IRQs 9 10 *11)
[    0.164341] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.164357] vgaarb: loaded
[    0.164476] SCSI subsystem initialized
[    0.164491] libata version 3.00 loaded.
[    0.164491] usbcore: registered new interface driver usbfs
[    0.164491] usbcore: registered new interface driver hub
[    0.164491] usbcore: registered new device driver usb
[    0.164491] PCI: Using ACPI for IRQ routing
[    0.164491] PCI: pci_cache_line_size set to 64 bytes
[    0.164491] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.164491] reserve RAM buffer: 00000000cf6e0000 - 00000000cfffffff
[    0.164491] hpet clockevent registered
[    0.164491] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.164491] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.164491] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.170012] Switching to clocksource hpet
[    0.170084] pnp: PnP ACPI init
[    0.170102] ACPI: bus type pnp registered
[    0.170228] pnp 00:00: [bus 00-ff]
[    0.170233] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.170236] pnp 00:00: [io  0x0d00-0xffff window]
[    0.170243] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.170248] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[    0.170253] pnp 00:00: [mem 0xd0000000-0xcfffffff window disabled]
[    0.170256] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[    0.170259] pnp 00:00: [mem 0xfed00000-0xfedfffff window]
[    0.170262] pnp 00:00: [mem 0xfef00000-0xffafffff window]
[    0.170265] pnp 00:00: [mem 0xffc00000-0xffefffff window]
[    0.170269] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.170324] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.170426] pnp 00:01: [io  0x0cb0-0x0cbb]
[    0.170490] system 00:01: [io  0x0cb0-0x0cbb] has been reserved
[    0.170496] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.170670] pnp 00:02: [mem 0xffb00000-0xffbfffff]
[    0.170716] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.170845] pnp 00:03: [io  0x0010-0x001f]
[    0.170848] pnp 00:03: [io  0x0022-0x002d]
[    0.170851] pnp 00:03: [io  0x0030-0x003f]
[    0.170854] pnp 00:03: [io  0x0050-0x0053]
[    0.170857] pnp 00:03: [io  0x0062-0x0063]
[    0.170859] pnp 00:03: [io  0x0065-0x006f]
[    0.170862] pnp 00:03: [io  0x0074-0x007f]
[    0.170865] pnp 00:03: [io  0x0090-0x009f]
[    0.170867] pnp 00:03: [io  0x00a2-0x00b1]
[    0.170870] pnp 00:03: [io  0x00b2-0x00b3]
[    0.170873] pnp 00:03: [io  0x00b4-0x00bf]
[    0.170876] pnp 00:03: [io  0x00ec-0x00ef]
[    0.170878] pnp 00:03: [io  0x0072-0x0073]
[    0.170881] pnp 00:03: [io  0x002e-0x002f]
[    0.170884] pnp 00:03: [io  0x04d0-0x04d1]
[    0.170886] pnp 00:03: [io  0xf000-0xf07f]
[    0.170889] pnp 00:03: [io  0xf100-0xf10f]
[    0.170892] pnp 00:03: [io  0xf180-0xf1bf]
[    0.170895] pnp 00:03: [io  0x0800-0x087f]
[    0.170897] pnp 00:03: [io  0xf820-0xf82f]
[    0.170900] pnp 00:03: [io  0xfe00]
[    0.170903] pnp 00:03: [mem 0xfec00000-0xfecfffff]
[    0.170906] pnp 00:03: [mem 0xfee00000-0xfeefffff]
[    0.170909] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[    0.170912] pnp 00:03: [mem 0xfed13000-0xfed13fff]
[    0.170914] pnp 00:03: [mem 0xfed14000-0xfed17fff]
[    0.170917] pnp 00:03: [mem 0xfed18000-0xfed18fff]
[    0.170920] pnp 00:03: [mem 0xfed19000-0xfed19fff]
[    0.170923] pnp 00:03: [mem 0xd0000000-0xdfffffff]
[    0.171011] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.171016] system 00:03: [io  0xf000-0xf07f] has been reserved
[    0.171020] system 00:03: [io  0xf100-0xf10f] has been reserved
[    0.171024] system 00:03: [io  0xf180-0xf1bf] has been reserved
[    0.171027] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.171031] system 00:03: [io  0xf820-0xf82f] has been reserved
[    0.171034] system 00:03: [io  0xfe00] has been reserved
[    0.171039] system 00:03: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.171043] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.171047] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.171051] system 00:03: [mem 0xfed13000-0xfed13fff] has been reserved
[    0.171055] system 00:03: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.171059] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.171063] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.171066] system 00:03: [mem 0xd0000000-0xdfffffff] has been reserved
[    0.171071] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.171089] pnp 00:04: [io  0x0000-0x000f]
[    0.171092] pnp 00:04: [io  0x0080-0x008f]
[    0.171095] pnp 00:04: [io  0x00c0-0x00df]
[    0.171098] pnp 00:04: [dma 4]
[    0.171147] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.171168] pnp 00:05: [io  0x0070-0x0071]
[    0.171179] pnp 00:05: [irq 8]
[    0.171226] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.171249] pnp 00:06: [io  0x00f0-0x00fe]
[    0.171256] pnp 00:06: [irq 13]
[    0.171303] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.171320] pnp 00:07: [io  0x0061]
[    0.171368] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.171447] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (disabled)
[    0.171511] pnp 00:09: [io  0x0060]
[    0.171515] pnp 00:09: [io  0x0064]
[    0.171522] pnp 00:09: [irq 1]
[    0.171600] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.171685] pnp 00:0a: [irq 12]
[    0.171762] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.171841] pnp 00:0b: [io  0x03f0-0x03f5]
[    0.171845] pnp 00:0b: [io  0x03f7]
[    0.171848] pnp 00:0b: [dma 2]
[    0.171854] pnp 00:0b: [irq 6]
[    0.171922] pnp 00:0b: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.172240] pnp 00:0c: [io  0x0378-0x037f]
[    0.172244] pnp 00:0c: [io  0x0778-0x077f]
[    0.172252] pnp 00:0c: [irq 7]
[    0.172255] pnp 00:0c: [dma 3]
[    0.172339] pnp 00:0c: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.172502] pnp 00:0d: [io  0x03f8-0x03ff]
[    0.172510] pnp 00:0d: [irq 4]
[    0.172601] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.172766] pnp 00:0e: [io  0x02f8-0x02ff]
[    0.172773] pnp 00:0e: [irq 3]
[    0.172862] pnp 00:0e: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.172871] pnp: PnP ACPI: found 15 devices
[    0.172873] ACPI: ACPI bus type pnp unregistered
[    0.173183] Switched to NOHz mode on CPU #0
[    0.173265] Switched to NOHz mode on CPU #1
[    0.209131] pci 0000:00:1c.3: BAR 8: assigned [mem 0xf0400000-0xf05fffff]
[    0.209139] pci 0000:00:1c.3: BAR 9: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.209145] pci 0000:00:1c.3: BAR 7: assigned [io  0x1000-0x1fff]
[    0.209151] pci 0000:00:1c.2: BAR 8: assigned [mem 0xf0800000-0xf09fffff]
[    0.209158] pci 0000:00:1c.2: BAR 9: assigned [mem 0xf0a00000-0xf0bfffff 64bit pref]
[    0.209163] pci 0000:00:1c.2: BAR 7: assigned [io  0x4000-0x4fff]
[    0.209170] pci 0000:00:1c.1: BAR 9: assigned [mem 0xf0c00000-0xf0dfffff 64bit pref]
[    0.209175] pci 0000:00:1c.1: BAR 7: assigned [io  0x5000-0x5fff]
[    0.209182] pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0e00000-0xf0ffffff]
[    0.209188] pci 0000:00:1c.0: BAR 9: assigned [mem 0xf1000000-0xf11fffff 64bit pref]
[    0.209194] pci 0000:00:1c.0: BAR 7: assigned [io  0x6000-0x6fff]
[    0.209198] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    0.209203] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.209209] pci 0000:00:1c.0:   bridge window [mem 0xf0e00000-0xf0ffffff]
[    0.209215] pci 0000:00:1c.0:   bridge window [mem 0xf1000000-0xf11fffff 64bit pref]
[    0.209223] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[    0.209227] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.209233] pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.209239] pci 0000:00:1c.1:   bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref]
[    0.209247] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[    0.209251] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.209257] pci 0000:00:1c.2:   bridge window [mem 0xf0800000-0xf09fffff]
[    0.209263] pci 0000:00:1c.2:   bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
[    0.209271] pci 0000:00:1c.3: PCI bridge to [bus 09-09]
[    0.209275] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.209281] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf05fffff]
[    0.209287] pci 0000:00:1c.3:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.209295] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
[    0.209298] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.209304] pci 0000:00:1e.0:   bridge window [mem 0xf0300000-0xf03fffff]
[    0.209309] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.209324] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.209337] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.209345] pci 0000:00:1c.0: setting latency timer to 64
[    0.209360] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.209366] pci 0000:00:1c.1: setting latency timer to 64
[    0.209374] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[    0.209385] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.209391] pci 0000:00:1c.2: setting latency timer to 64
[    0.209399] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[    0.209410] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.209417] pci 0000:00:1c.3: setting latency timer to 64
[    0.209425] pci 0000:00:1e.0: setting latency timer to 64
[    0.209431] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.209436] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.209441] pci_bus 0000:03: resource 0 [io  0x6000-0x6fff]
[    0.209444] pci_bus 0000:03: resource 1 [mem 0xf0e00000-0xf0ffffff]
[    0.209447] pci_bus 0000:03: resource 2 [mem 0xf1000000-0xf11fffff 64bit pref]
[    0.209451] pci_bus 0000:05: resource 0 [io  0x5000-0x5fff]
[    0.209453] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.209457] pci_bus 0000:05: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref]
[    0.209460] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    0.209463] pci_bus 0000:07: resource 1 [mem 0xf0800000-0xf09fffff]
[    0.209466] pci_bus 0000:07: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref]
[    0.209469] pci_bus 0000:09: resource 0 [io  0x1000-0x1fff]
[    0.209472] pci_bus 0000:09: resource 1 [mem 0xf0400000-0xf05fffff]
[    0.209475] pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.209479] pci_bus 0000:0b: resource 1 [mem 0xf0300000-0xf03fffff]
[    0.209483] pci_bus 0000:0b: resource 4 [io  0x0000-0xffff]
[    0.209488] pci_bus 0000:0b: resource 5 [mem 0x00000000-0xffffffff]
[    0.209514] NET: Registered protocol family 2
[    0.209553] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.209677] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.210182] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.210431] TCP: Hash tables configured (established 131072 bind 65536)
[    0.210434] TCP reno registered
[    0.210438] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.210447] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.210513] NET: Registered protocol family 1
[    0.210533] pci 0000:00:02.0: Boot video device
[    0.210654] PCI: CLS 32 bytes, default 64
[    0.210720] Simple Boot Flag at 0x69 set to 0x1
[    0.210959] microcode: CPU0 sig=0xf43, pf=0x10, revision=0x5
[    0.210974] microcode: CPU1 sig=0xf43, pf=0x10, revision=0x5
[    0.211010] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.211364] highmem bounce pool size: 64 pages
[    0.213442] VFS: Disk quotas dquot_6.5.2
[    0.213505] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.214328] NTFS driver 2.1.30 [Flags: R/W].
[    0.214478] msgmni has been set to 1710
[    0.214757] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.214762] io scheduler noop registered
[    0.214764] io scheduler deadline registered
[    0.214784] io scheduler cfq registered (default)
[    0.215074] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.215182] isapnp: Scanning for PnP cards...
[    0.571243] isapnp: No Plug & Play device found
[    0.597153] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.870123] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.186791] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.213402] Refined TSC clocksource calibration: 2992.577 MHz.
[    1.213409] Switching to clocksource tsc
[    1.357528] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.420686] 00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.463449] Real Time Clock Driver v1.12b
[    1.463679] Non-volatile memory driver v1.3
[    1.463795] intel_rng: FWH not detected
[    1.465065] brd: module loaded
[    1.465677] loop: module loaded
[    1.465920] ata_piix 0000:00:1f.2: version 2.13
[    1.465938] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.465943] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.616694] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.617040] scsi0 : ata_piix
[    1.617149] scsi1 : ata_piix
[    1.617822] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3800 irq 14
[    1.617827] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3808 irq 15
[    1.619218] Fixed MDIO Bus: probed
[    1.619232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.619266] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.619281] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.619285] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.619316] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.633360] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.637247] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.637267] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0004000
[    1.650014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.650064] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.650069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.650072] usb usb1: Product: EHCI Host Controller
[    1.650075] usb usb1: Manufacturer: Linux 2.6.39 ehci_hcd
[    1.650078] usb usb1: SerialNumber: 0000:00:1d.7
[    1.650225] hub 1-0:1.0: USB hub found
[    1.650231] hub 1-0:1.0: 8 ports detected
[    1.650362] 116x: driver isp116x-hcd, 03 Nov 2005
[    1.650377] driver isp1362-hcd, 2005-04-04
[    1.650389] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.650410] uhci_hcd: USB Universal Host Controller Interface driver
[    1.650440] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.650448] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.650453] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.650463] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.666697] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002400
[    1.666743] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.666748] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.666752] usb usb2: Product: UHCI Host Controller
[    1.666754] usb usb2: Manufacturer: Linux 2.6.39 uhci_hcd
[    1.666757] usb usb2: SerialNumber: 0000:00:1d.0
[    1.666877] hub 2-0:1.0: USB hub found
[    1.666883] hub 2-0:1.0: 2 ports detected
[    1.666999] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    1.667007] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.667012] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.667023] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.693372] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002800
[    1.693415] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.693421] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.693424] usb usb3: Product: UHCI Host Controller
[    1.693427] usb usb3: Manufacturer: Linux 2.6.39 uhci_hcd
[    1.693430] usb usb3: SerialNumber: 0000:00:1d.1
[    1.693548] hub 3-0:1.0: USB hub found
[    1.693554] hub 3-0:1.0: 2 ports detected
[    1.693659] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    1.693667] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.693671] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.693682] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.720040] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00002c00
[    1.720089] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.720094] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.720097] usb usb4: Product: UHCI Host Controller
[    1.720100] usb usb4: Manufacturer: Linux 2.6.39 uhci_hcd
[    1.720107] usb usb4: SerialNumber: 0000:00:1d.2
[    1.720223] hub 4-0:1.0: USB hub found
[    1.720229] hub 4-0:1.0: 2 ports detected
[    1.720335] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[    1.720343] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.720347] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.720357] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.746705] uhci_hcd 0000:00:1d.3: irq 20, io base 0x00003000
[    1.746748] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.746753] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.746756] usb usb5: Product: UHCI Host Controller
[    1.746759] usb usb5: Manufacturer: Linux 2.6.39 uhci_hcd
[    1.746762] usb usb5: SerialNumber: 0000:00:1d.3
[    1.746881] hub 5-0:1.0: USB hub found
[    1.746886] hub 5-0:1.0: 2 ports detected
[    1.747020] sl811: driver sl811-hcd, 19 May 2005
[    1.747035] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[    1.747116] usbcore: registered new interface driver uas
[    1.747119] Initializing USB Mass Storage driver...
[    1.747164] usbcore: registered new interface driver usb-storage
[    1.747166] USB Mass Storage support registered.
[    1.747184] usbcore: registered new interface driver ums-alauda
[    1.747201] usbcore: registered new interface driver ums-datafab
[    1.747218] usbcore: registered new interface driver ums_eneub6250
[    1.747235] usbcore: registered new interface driver ums-freecom
[    1.747253] usbcore: registered new interface driver ums-isd200
[    1.747270] usbcore: registered new interface driver ums-jumpshot
[    1.747291] usbcore: registered new interface driver ums-realtek
[    1.747308] usbcore: registered new interface driver ums-sddr09
[    1.747326] usbcore: registered new interface driver ums-sddr55
[    1.747344] usbcore: registered new interface driver ums-usbat
[    1.747365] usbcore: registered new interface driver ldusb
[    1.747443] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.750398] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.750405] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.750547] mousedev: PS/2 mouse device common for all mice
[    1.750669] md: raid0 personality registered for level 0
[    1.750714] EISA: Probing bus 0 at eisa.0
[    1.750721] Cannot allocate resource for EISA slot 1
[    1.750724] Cannot allocate resource for EISA slot 2
[    1.750726] Cannot allocate resource for EISA slot 3
[    1.750729] Cannot allocate resource for EISA slot 4
[    1.750732] Cannot allocate resource for EISA slot 5
[    1.750734] Cannot allocate resource for EISA slot 6
[    1.750744] EISA: Detected 0 cards.
[    1.750750] cpuidle: using governor ladder
[    1.750753] cpuidle: using governor menu
[    1.750994] usbcore: registered new interface driver usbhid
[    1.750997] usbhid: USB HID core driver
[    1.751015] Netfilter messages via NETLINK v0.30.
[    1.751050] TCP cubic registered
[    1.751054] NET: Registered protocol family 17
[    1.751062] Registering the dns_resolver key type
[    1.751080] Using IPI No-Shortcut mode
[    1.777102] ata2.00: ATAPI: _NEC DVD_RW ND-4550A, 1.85, max UDMA/33
[    1.777369] ata1.00: ATA-6: ST380013AS, 3.00, max UDMA/133
[    1.777374] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.790335] ata2.00: configured for UDMA/33
[    1.790420] ata1.00: configured for UDMA/133
[    1.790575] scsi 0:0:0:0: Direct-Access     ATA      ST380013AS       3.00 PQ: 0 ANSI: 5
[    1.790784] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.791013] sd 0:0:0:0: [sda] Write Protect is off
[    1.791019] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.791065] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.794608] scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-4550A  1.85 PQ: 0 ANSI: 5
[    1.796310] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.796315] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.796418] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.812188]  sda: sda1 sda2 sda3 sda4
[    1.812598] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.812621] md: Waiting for all devices to be available before autodetect
[    1.812625] md: If you don't use raid, use raid=noautodetect
[    1.812755] md: Autodetecting RAID arrays.
[    1.812759] md: Scanned 0 and added 0 devices.
[    1.812761] md: autorun ...
[    1.812763] md: ... autorun DONE.
[    1.847529] EXT3-fs (sda4): error: couldn't mount because of unsupported optional features (240)
[    1.870192] EXT2-fs (sda4): error: couldn't mount because of unsupported optional features (240)
[    1.909171] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    1.909184] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[    1.909227] Freeing unused kernel memory: 456k freed
[    2.063414] usb 1-2: new high speed USB device number 3 using ehci_hcd
[    2.203941] usb 1-2: New USB device found, idVendor=148f, idProduct=3070
[    2.203946] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.203950] usb 1-2: Product: 802.11 n WLAN
[    2.203953] usb 1-2: Manufacturer: Ralink
[    2.203956] usb 1-2: SerialNumber: 1.0
[    2.310016] usb 1-4: new high speed USB device number 4 using ehci_hcd
[    2.385019] EXT4-fs (sda4): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[    2.442191] usb 1-4: New USB device found, idVendor=059b, idProduct=0070
[    2.442197] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.442201] usb 1-4: Product: LDHD-UP3
[    2.442204] usb 1-4: Manufacturer: iomega
[    2.442207] usb 1-4: SerialNumber: 0000D3109828
[    2.450999] scsi2 : usb-storage 1-4:1.0
[    2.451110] usb-storage: device found at 4
[    2.451115] usb-storage: waiting for device to settle before scanning
[    2.676709] usb 2-1: new full speed USB device number 2 using uhci_hcd
[    2.850747] usb 2-1: New USB device found, idVendor=046d, idProduct=c52e
[    2.850755] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.850759] usb 2-1: Product: USB Receiver
[    2.850761] usb 2-1: Manufacturer: Logitech
[    2.870150] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input0
[    2.870170] generic-usb 0003:046D:C52E.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[    2.874316] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input1
[    2.874446] generic-usb 0003:046D:C52E.0002: input,hiddev0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[    3.000578] Floppy drive(s): fd0 is 1.44M
[    3.016965] FDC 0 is a post-1991 82077
[    3.255914] udevd (107): /proc/107/oom_adj is deprecated, please use /proc/107/oom_score_adj instead.
[    3.461990] scsi 2:0:0:0: Direct-Access     OEM      Ext Hard Disk    0000 PQ: 0 ANSI: 5
[    3.480868] scsi 2:0:0:1: CD-ROM            Virtual  CDROM                 PQ: 0 ANSI: 0
[    3.603920] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.604307] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.604543] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    3.698016] ACPI: acpi_idle registered with cpuidle
[    3.719820] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    3.719832] ACPI: Power Button [PWRB]
[    3.720075] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.720084] ACPI: Power Button [PWRF]
[    4.253395] Linux agpgart interface v0.103
[    4.508791] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.565182] leds_ss4200: no LED devices found
[    4.587539] leds_ss4200: no LED devices found
[    4.728340] tg3.c:v3.117 (January 25, 2011)
[    4.728365] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.728379] tg3 0000:05:00.0: setting latency timer to 64
[    4.780310] tg3 0000:05:00.0: eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:30:05:a7:20:d8
[    4.780321] tg3 0000:05:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    4.780330] tg3 0000:05:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    4.780337] tg3 0000:05:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    4.816820] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    4.968932] fuse init (API version 7.16)
[   12.772592] sd 2:0:0:0: [sdb] 488199446 4096-byte logical blocks: (1.99 TB/1.81 TiB)
[   12.826579] sd 2:0:0:0: [sdb] Write Protect is off
[   12.826588] sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00
[   12.826592] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   12.858090] sr1: scsi-1 drive
[   12.858271] sr 2:0:0:1: Attached scsi CD-ROM sr1
[   12.858478] sr 2:0:0:1: Attached scsi generic sg3 type 5
[   12.896840] sd 2:0:0:0: [sdb] 488199446 4096-byte logical blocks: (1.99 TB/1.81 TiB)
[   12.950960] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   12.951036] scsi: killing requests for dead queue
[   12.969855]  sdb: sdb1
[   13.000588] sd 2:0:0:0: [sdb] 488199446 4096-byte logical blocks: (1.99 TB/1.81 TiB)
[   13.000620] scsi: killing requests for dead queue
[   13.000640] usb-storage: device scan complete
[   13.023206] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   13.023214] sd 2:0:0:0: [sdb] Attached SCSI disk
[   13.038719] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   13.059345] aufs 2.1-standalone.tree-39-20110704
[   13.067981] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[   13.068166] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[   13.068922] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[   13.093676] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   13.100503] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[   13.154531] cfg80211: Calling CRDA to update world regulatory domain
[   13.516216] parport_pc 00:0c: reported by Plug and Play ACPI
[   13.516280] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   13.539895] rt61pci 0000:0b:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   13.719672] ppdev: user-space parallel port driver
[   14.025472] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[   14.066328] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.066730] Registered led device: rt61pci-phy0::radio
[   14.066766] Registered led device: rt61pci-phy0::assoc
[   14.113616] rtusb init --->
[   14.113911] === pAd = f84ae000, size = 464580 ===
[   14.113917] <-- RTMPAllocAdapterBlock, Status=0
[   14.126618] usbcore: registered new interface driver rt2870
[   14.317233] usbcore: registered new interface driver rt2800usb
[   14.419768] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   14.419847] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[   14.419888] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.484693] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[   16.660978] usb 1-2: firmware file rt3070.bin request failed (-2)
[   16.660986] NICLoadFirmware failed, Status[=0x00000001]
[   16.660993] rt28xx Initialized fail!
[   16.669106] usb 1-2: firmware file rt3070.bin request failed (-2)
[   16.669114] NICLoadFirmware failed, Status[=0x00000001]
[   16.669120] rt28xx Initialized fail!
[   17.842594] [drm] Initialized drm 1.1.0 20060810
[   17.988875] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.988886] i915 0000:00:02.0: setting latency timer to 64
[   18.019787] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   18.019794] [drm] Driver supports precise vblank timestamp query.
[   18.183730] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   18.184134] [drm] initialized overlay support
[   18.285656] fbcon: inteldrmfb (fb0) is primary device
[   18.285769] Console: switching to colour frame buffer device 80x30
[   18.285782] fb0: inteldrmfb frame buffer device
[   18.285786] drm: registered panic notifier
[   18.286042] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   23.401153] vattery-ibam[3541]: segfault at 0 ip b6eca82c sp bff3b24c error 4 in libc-2.11.1.so[b6e9a000+142000]
[   24.231656] freememapplet_t[3850]: segfault at 0 ip 08048fb9 sp bff7d350 error 6 in freememapplet_tray[8048000+2000]
[   25.436210] usb 1-2: firmware file rt3070.bin request failed (-2)
[   25.436217] NICLoadFirmware failed, Status[=0x00000001]
[   25.436222] rt28xx Initialized fail!
[   64.317716] usb 1-2: firmware file rt3070.bin request failed (-2)
[   64.317724] NICLoadFirmware failed, Status[=0x00000001]
[   64.317729] rt28xx Initialized fail!
[/code]
_________________
Don't poop it down... Pup it Up ! http://pupitup.org/
Back to top
View user's profile Send private message Visit poster's website 
pemasu


Joined: 08 Jul 2009
Posts: 5463
Location: Finland

PostPosted: Sun 28 Aug 2011, 16:30    Post subject:  

Eztuxer. It complains that the firmware rt3070.bin does not initialize your wireless chip and so the rt2870sta driver module does not load.
Anyway, you seems to need firmware which is not included in Polarpup.
If you have working wireless with some Puppy, you should check what firmware and and also what realtek driver it uses.
Use whatever method works. The firmware is not kernel version spesific but there is possibility that you need different driver also.
lspci -nnv and post the wireless rows it produces. We will get the device Id and revision number with that command.
Back to top
View user's profile Send private message 
eztuxer


Joined: 06 Nov 2008
Posts: 483
Location: Belgium

PostPosted: Sun 28 Aug 2011, 18:06    Post subject:  

Thanks pemasu,

It doesn't show up with lspci -nnv because it is an usb wlan card.

I know that it works with the rt2870sta in 525 which I'm using right now.
I need to unload the module that is automatically detected and loaded at start up, then blacklist it and load the rt2870sta module.
That's what I did with 525, and it works fine for months now.
But when I do this with any puplet with newer kernel it fails to bring up the interface.
I had the same problem with snow pup a while ago, and then with kernel 2.6.33.2 in 520 then 525 it worked perfect.

I give you the dmesg from this 525 version, (in next post) so you can compare the module handling between kernels.

_________________
Don't poop it down... Pup it Up ! http://pupitup.org/
Back to top
View user's profile Send private message Visit poster's website 
eztuxer


Joined: 06 Nov 2008
Posts: 483
Location: Belgium

PostPosted: Sun 28 Aug 2011, 18:26    Post subject:  

Code:
sh-4.1# dmesg
)
ACPI: FACS cf6edfc0 00040
ACPI: ASF! cf6ecbb9 00085 (v16 OEMID  OEMTBL   00050000 PTL  00000001)
ACPI: SSDT cf6ecc3e 0017C (v01 FSC    EISTCPU0 00050000  CSF 00000001)
ACPI: SSDT cf6ecdba 0017C (v01 FSC    EISTCPU1 00050000  CSF 00000001)
ACPI: MCFG cf6ecf36 00040 (v01 PTLTD    MCFG   00050000  LTP 00000000)
ACPI: APIC cf6ecf76 00062 (v01 FSC    ? APIC   00050000  CSF 00000000)
ACPI: BOOT cf6ecfd8 00028 (v01 PTLTD  $SBFTBL$ 00050000  LTP 00000001)
ACPI: Local APIC address 0xfee00000
2430MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00016000 - 0001cf00
(13 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0001000000 - 000144c744]    TEXT DATA BSS ==> [0001000000 - 000144c744]
  #3 [000144d000 - 0001453190]              BRK ==> [000144d000 - 0001453190]
  #4 [00000f75b0 - 0000100000]    BIOS reserved ==> [00000f75b0 - 0000100000]
  #5 [00000f75a0 - 00000f75b0]     MP-table mpf ==> [00000f75a0 - 00000f75b0]
  #6 [000009f800 - 000009fd70]    BIOS reserved ==> [000009f800 - 000009fd70]
  #7 [000009ff00 - 00000f75a0]    BIOS reserved ==> [000009ff00 - 00000f75a0]
  #8 [000009fd70 - 000009ff00]     MP-table mpc ==> [000009fd70 - 000009ff00]
  #9 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
  #10 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
  #11 [0000015000 - 0000016000]          PGTABLE ==> [0000015000 - 0000016000]
  #12 [0000016000 - 000001d000]          BOOTMAP ==> [0000016000 - 000001d000]
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x000cf6e0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000cf6e0
On node 0 totalpages: 849519
free_area_init_node: node 0, pgdat c13c1ac0, node_mem_map c1455200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 4862 pages used for memmap
  HighMem zone: 617444 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0xf008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @c3000000 s25816 r0 d23336 u2097152
pcpu-alloc: s25816 r0 d23336 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 842881
Kernel command line: root=/dev/sda1 ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:000cf6e0)
Memory: 3365136k/3398528k available (2614k kernel code, 31976k reserved, 1250k data, 328k init, 2489224k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff6a000 - 0xfffff000   ( 596 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc13c7000 - 0xc1419000   ( 328 kB)
      .data : 0xc128d936 - 0xc13c62e0   (1250 kB)
      .text : 0xc1000000 - 0xc128d936   (2614 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:384
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2992.876 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.75 BogoMIPS (lpj=11971504)
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
APIC calibration not consistent with PM-Timer: 97ms instead of 100ms
APIC delta adjusted to PM-Timer: 1246905 (1221271)
Booting Node   0, Processors  #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (11971.01 BogoMIPS).
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=11
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfedfffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfef00000-0xffafffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xffc00000-0xffefffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0xf0080000-0xf00fffff]
pci 0000:00:02.0: reg 14: [io  0x2000-0x2007]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xf0040000-0xf007ffff]
pci 0000:00:02.1: reg 10: [mem 0xf0100000-0xf017ffff]
pci 0000:00:1b.0: reg 10: [mem 0xf0000000-0xf0003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x2400-0x241f]
pci 0000:00:1d.1: reg 20: [io  0x2800-0x281f]
pci 0000:00:1d.2: reg 20: [io  0x2c00-0x2c1f]
pci 0000:00:1d.3: reg 20: [io  0x3000-0x301f]
pci 0000:00:1d.7: reg 10: [mem 0xf0004000-0xf00043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io  0xf000-0xf07f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0xf180-0xf1bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 00ff)
pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io  0x3800-0x380f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io  0x3400-0x341f]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:05:00.0: reg 10: [mem 0xf0200000-0xf020ffff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 05-05]
pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:1c.2: PCI bridge to [bus 07-07]
pci 0000:00:1c.3: PCI bridge to [bus 09-09]
pci 0000:0b:07.0: reg 10: [mem 0xf0300000-0xf0307fff]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0300000-0xf03fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXD._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *9 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 9 10 11) *5
ACPI: PCI Interrupt Link [LNKG] (IRQs 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 9 10 *11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: [io  0x0cb0-0x0cbb] has been reserved
system 00:03: [io  0x04d0-0x04d1] has been reserved
system 00:03: [io  0xf000-0xf07f] has been reserved
system 00:03: [io  0xf100-0xf10f] has been reserved
system 00:03: [io  0xf180-0xf1bf] has been reserved
system 00:03: [io  0x0800-0x087f] has been reserved
system 00:03: [io  0xf820-0xf82f] has been reserved
system 00:03: [io  0xfe00] has been reserved
system 00:03: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:03: [mem 0xfed13000-0xfed13fff] has been reserved
system 00:03: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:03: [mem 0xd0000000-0xdfffffff] has been reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0400000-0xf05fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.1: BAR 9: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
pci 0000:00:1c.2: BAR 8: assigned [mem 0xf0a00000-0xf0bfffff]
pci 0000:00:1c.2: BAR 9: assigned [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci 0000:00:1c.3: BAR 8: assigned [mem 0xf0e00000-0xf0ffffff]
pci 0000:00:1c.3: BAR 9: assigned [mem 0xf1000000-0xf11fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.1: BAR 7: assigned [io  0x4000-0x4fff]
pci 0000:00:1c.2: BAR 7: assigned [io  0x5000-0x5fff]
pci 0000:00:1c.3: BAR 7: assigned [io  0x6000-0x6fff]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf05fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 05-05]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:1c.1:   bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 07-07]
pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.2:   bridge window [mem 0xf0a00000-0xf0bfffff]
pci 0000:00:1c.2:   bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 09-09]
pci 0000:00:1c.3:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.3:   bridge window [mem 0xf0e00000-0xf0ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf1000000-0xf11fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: enabling device (0000 -> 0003)
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: enabling device (0000 -> 0003)
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf05fffff]
pci_bus 0000:03: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:05: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:07: resource 1 [mem 0xf0a00000-0xf0bfffff]
pci_bus 0000:07: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci_bus 0000:09: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:09: resource 1 [mem 0xf0e00000-0xf0ffffff]
pci_bus 0000:09: resource 2 [mem 0xf1000000-0xf11fffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0xf0300000-0xf03fffff]
pci_bus 0000:0b: resource 3 [io  0x0000-0xffff]
pci_bus 0000:0b: resource 4 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
Simple Boot Flag at 0x69 set to 0x1
highmem bounce pool size: 64 pages
NTFS driver 2.1.29 [Flags: R/W].
msgmni has been set to 1712
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
intel_rng: FWH not detected
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3808 irq 15
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ata2.00: ATAPI: _NEC DVD_RW ND-4550A, 1.85, max UDMA/33
ata1.00: ATA-6: ST380013AS, 3.00, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      ST380013AS       3.00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-4550A  1.85 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
 sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda1): recovery required on readonly filesystem
EXT3-fs (sda1): write access will be enabled during recovery
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): recovery complete
EXT3-fs (sda1): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 328k freed
EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda1): using internal journal
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0004000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
udevd version 124 started
usb 1-8: new high speed USB device using ehci_hcd and address 3
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
rtusb init --->
=== pAd = f81e2000, size = 463228 ===
 RTMPAllocAdapterBlock, Status=0
usbcore: registered new interface driver rt2870
parport_pc 00:0c: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945G Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00002c00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 20, io base 0x00003000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
fuse init (API version 7.13)
input: PC Speaker as /devices/platform/pcspkr/input/input2
leds_ss4200: no LED devices found
aufs 2-standalone.tree-33-20100329
usb 2-1: new full speed USB device using uhci_hcd and address 2
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
squashfs: version 4.0 (2009/01/31) Phillip Lougher
tg3.c:v3.106 (January 12, 2010)
tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:05:00.0: setting latency timer to 64
eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:30:05:a7:20:d8
eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: 00
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
rt61pci 0000:0b:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
generic-usb 0003:046D:C52E.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4
generic-usb 0003:046D:C52E.0002: input,hiddev96: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt61pci-phy0::radio
Registered led device: rt61pci-phy0::assoc
tg3 0000:05:00.0: PME# enabled
pcieport 0000:00:1c.1: wake-up capability enabled by ACPI
 RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1
MCS Set = 00 00 00 00 00
== rt28xx_init, Status=0
0x1300 = 00073200
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
rt61pci 0000:0b:07.0: firmware: requesting rt2561s.bin
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm] set up 7M of stolen space
[drm] initialized overlay support
Console: switching to colour frame buffer device 160x64
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
pcieport 0000:00:1c.1: wake-up capability disabled by ACPI
tg3 0000:05:00.0: PME# disabled
tg3 0000:05:00.0: BAR 0: set to [mem 0xf0200000-0xf020ffff 64bit] (PCI address [0xf0200000-0xf020ffff]
tg3 0000:05:00.0: PME# enabled
pcieport 0000:00:1c.1: wake-up capability enabled by ACPI
 RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
== rt28xx_init, Status=0
0x1300 = 00073200
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
pcieport 0000:00:1c.1: wake-up capability disabled by ACPI
tg3 0000:05:00.0: PME# disabled
tg3 0000:05:00.0: BAR 0: set to [mem 0xf0200000-0xf020ffff 64bit] (PCI address [0xf0200000-0xf020ffff]
tg3 0000:05:00.0: PME# enabled
pcieport 0000:00:1c.1: wake-up capability enabled by ACPI
 RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
== rt28xx_init, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1057
===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1091
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
 RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
== rt28xx_init, Status=0
0x1300 = 00073200
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
 RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
== rt28xx_init, Status=0
0x1300 = 00073200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
IOCTL::unknown IOCTL's cmd = 0x00008947
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
 RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
== rt28xx_init, Status=0
0x1300 = 000a4200
===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 480
===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 674
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
 RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
== rt28xx_init, Status=0
0x1300 = 000a4200
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
 RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
== rt28xx_init, Status=0
0x1300 = 000a4200
===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 568
===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 915
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
 RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
== rt28xx_init, Status=0
0x1300 = 000a4200
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
 RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
== rt28xx_init, Status=0
0x1300 = 000a4200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=9)
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=9)
IOCTL::unknown IOCTL's cmd = 0x00008947
ERROR! RTMPResumeMsduTransmission, R66CurrentValue=0...
0:3 LTL=0 , TL=0 L:3344
usb 1-7: new high speed USB device using ehci_hcd and address 4
Initializing USB Mass Storage driver...
scsi2 : usb-storage 1-7:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access     DaneElec Z Mate 16GB      PMAP PQ: 0 ANSI: 0 CCS
usb-storage: device scan complete
sd 2:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode
0:3 LTL=0 , TL=0 L:2700
0:3 LTL=0 , TL=0 L:4176
0:3 LTL=0 , TL=0 L:732
0:3 LTL=0 , TL=0 L:4128
0:3 LTL=0 , TL=0 L:4128
0:3 LTL=0 , TL=0 L:3356
0:3 LTL=0 , TL=0 L:4172
DeQueueRunning[0]= TRUE!
DeQueueRunning[0]= TRUE!
0:3 LTL=0 , TL=0 L:4164
0:3 LTL=0 , TL=0 L:4124
0:4 LTL=0 , TL=0 L:4124
0:3 LTL=0 , TL=0 L:3192
0:3 LTL=0 , TL=0 L:4160
0:3 LTL=0 , TL=0 L:4184
0:3 LTL=0 , TL=0 L:4172
0:3 LTL=0 , TL=0 L:4172
0:3 LTL=0 , TL=0 L:4124
0:4 LTL=0 , TL=0 L:4124
0:3 LTL=0 , TL=0 L:4156
0:3 LTL=0 , TL=0 L:4168
0:3 LTL=0 , TL=0 L:4192
0:3 LTL=0 , TL=0 L:4164
0:3 LTL=0 , TL=0 L:4104
0:4 LTL=0 , TL=0 L:4104
0:3 LTL=0 , TL=0 L:4228
0:3 LTL=0 , TL=0 L:4176
0:3 LTL=0 , TL=0 L:3756
0:3 LTL=0 , TL=0 L:3628
0:3 LTL=0 , TL=0 L:4168
0:4 LTL=0 , TL=0 L:4168
0:3 LTL=0 , TL=0 L:4208
0:3 LTL=0 , TL=0 L:1512
0:3 LTL=0 , TL=0 L:4184
0:3 LTL=0 , TL=0 L:4164
0:4 LTL=0 , TL=0 L:4164
0:5 LTL=0 , TL=0 L:4164
0:3 LTL=0 , TL=0 L:4180
0:3 LTL=0 , TL=0 L:2552
0:3 LTL=0 , TL=0 L:3340
0:3 LTL=0 , TL=0 L:4228
0:3 LTL=0 , TL=0 L:4176
0:3 LTL=0 , TL=0 L:1456
0:3 LTL=0 , TL=0 L:4228
0:3 LTL=0 , TL=0 L:4228
0:3 LTL=0 , TL=0 L:128
0:3 LTL=0 , TL=0 L:4228
0:4 LTL=0 , TL=0 L:4228
0:3 LTL=0 , TL=0 L:3624
0:3 LTL=0 , TL=0 L:4228
0:3 LTL=0 , TL=0 L:1528
0:3 LTL=0 , TL=0 L:1744
0:4 LTL=0 , TL=0 L:1744
0:3 LTL=0 , TL=0 L:4108
0:4 LTL=0 , TL=0 L:4108
0:3 LTL=0 , TL=0 L:4180
sh-4.1#

_________________
Don't poop it down... Pup it Up ! http://pupitup.org/
Back to top
View user's profile Send private message Visit poster's website 
pemasu


Joined: 08 Jul 2009
Posts: 5463
Location: Finland

PostPosted: Mon 29 Aug 2011, 11:14    Post subject:  

I couldnt find product id and rev number from dmesg post. I can see that firmware loads and driver loads ok in 525.
I still try to find out the identification of your usb wireless.
I quote Tempestuous now, which we need soon. Lol.

Quote:
As with all these "what driver do I need?" requests, it's impossible to know for sure until you reveal the exact device ID.
Run this command
Code:
cat /proc/bus/usb/devices

then report the "Vendor" and "ProdID" values for your wifi device.

Code:

cat /proc/bus/usb/devices
Back to top
View user's profile Send private message 
Béèm


Joined: 21 Nov 2006
Posts: 11782
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

PostPosted: Mon 29 Aug 2011, 18:22    Post subject: polarpup 004 keyboard belgium  

polarpup 004 keyboard Belgium
After install and altho I did select the be-latin1 keyboard, it stayed in qwerty.
I remember having such an issue and I think it was in one of the other 'cold' puppy's.
My graphics adapter is a radeon 7500 and the radeon driver was probed and used.

I then went to the X command prompt and the keyboard was in azerty.
I typed xorgwizard and configures for the vesa driver.

After restarting X the keyboard was in azerty.

If I recall well, in that other puppy, no solution had been found.

_________________
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
Back to top
View user's profile Send private message 
Béèm


Joined: 21 Nov 2006
Posts: 11782
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

PostPosted: Mon 29 Aug 2011, 18:25    Post subject: polarpup 004 rox strange display  

polarpup 004 rox strange display
When I edit/create a file, display in ROX is strange with boxes.
rox-size-polarpup-004.png
 Description   
 Filesize   175.91 KB
 Viewed   552 Time(s)

rox-size-polarpup-004.png


_________________
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
Back to top
View user's profile Send private message 
Béèm


Joined: 21 Nov 2006
Posts: 11782
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

PostPosted: Tue 30 Aug 2011, 03:47    Post subject: polarpup 004 and enlightenment  

polarpup 004 and enlightenment
I loaded the E17 sfs (made from the E17 pet).
It didn't seem I got enlightenment.

This morning I booted and my desktop was enlightenment.

Nice addition to polarpup.
E17-polarpup.png
 Description   
 Filesize   19.91 KB
 Viewed   499 Time(s)

E17-polarpup.png


_________________
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
Back to top
View user's profile Send private message 
marco07

Joined: 18 Jan 2011
Posts: 176
Location: Lincoln , NE, USA

PostPosted: Tue 30 Aug 2011, 08:02    Post subject:  

pemasu wrote:
You are welcome. Please, post again if you find something non working. I will reupload Polarpup-004 again quite soon with found bugs fixed...If I can....


pemasu:
I wonder if any thing could be done about this issue I just came across when surfing the web?
It seems since I have installed two gstreamer plugins (bad & ugly) which were not included in stock 004, the mplayer no longer functions. It opens up, then stops.Everything else is working great.
Thanks!
Back to top
View user's profile Send private message 
pemasu


Joined: 08 Jul 2009
Posts: 5463
Location: Finland

PostPosted: Tue 30 Aug 2011, 10:00    Post subject:  

Marco07. have you launched it in console to see error messages. Also /tmp/xerrs.log could show what went wrong.
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 20 of 34 [498 Posts]   Goto page: Previous 1, 2, 3, ..., 18, 19, 20, 21, 22, ..., 32, 33, 34 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Puppy Derivatives
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.4196s ][ Queries: 13 (0.0113s) ][ GZIP on ]