Puppy Linux Discussion Forum

nickdobrinich · Joined: 05 Apr 2007 Posts: 77 Location: Cleveland OH USA

@Tazoc,
Thank you for the fast reply.
Using gparted inside of the VM is pure genius.
I will try forthwith.
I already did the symlink once I found out I was filling up my LHP save file.
If I can get this to work I will try to post the VDI somewhere public to further the advance of LHP onto everyone's desktop.
Nick

nickdobrinich · Joined: 05 Apr 2007 Posts: 77 Location: Cleveland OH USA

EDIT: in swapping removable CD drives around, I used a ROM drive which of course cannot burn a CD.
This is what the error messages look like.
ID 10 T.
If someone could remove this post, I would be less embarrassed.

I don't often burn data CDs but I had a Windows data CD to burn tonight with long file names with spaces.
Pburn 3.3.0 failed repeatedly on several machines in both LHP 5.03g and 5.02g.
I was finally able to burn it on one of the PCs with an old Puppy 4.31 running Pburn 3.1.2
As an added note, I burn ISOs on this same PC with Burniso2cd all the time.

Here is the failed Pburn.log:

Pburn version 3.3.0

###################################################
COMMAND:
###################################################
mkisofs -f -iso-level 3 -D -R -J -joliet-long -V "pburn_project" -p root -publisher "Pburn" -o "/root/.pburn/Pburn.iso" -exclude-list /root/.pburn/tmp/exclude -graft-points -path-list=/root/.pburn/tmp/graft_points
cdrecord -multi -tao -v dev=sr0 driveropts=burnfree "/root/.pburn/Pburn.iso"

###################################################
OUTPUT:
###################################################
Warning: -follow-links does not always work correctly; be careful.
I: -input-charset not specified, using iso-8859-1 (detected in locale settings)
Using ROOM_CONTROLLER_RELEASE_N000.PD;1 for /mnt/sda7/Delta/Delta Controls/pdf/V3/Room Controller Release Notes_rev 1.2.pdf (Room Controller Release Notes_rev 1.1.pdf)
More of the same...
Using ROOM_CONTROLLER_RELEASE_N000.PD;1 for /mnt/sda7/Delta/pdf/V3/Room Controller Release Notes_rev 1.2.pdf (Room Controller Release Notes_rev 1.1.pdf)
2.27% done, estimate finish Mon May 16 23:29:42 2011
4.55% done, estimate finish Mon May 16 23:27:08 2011
More of the same...
97.62% done, estimate finish Mon May 16 23:24:30 2011
99.89% done, estimate finish Mon May 16 23:24:30 2011
Total translation table size: 0
Total rockridge attributes bytes: 240538
Total directory bytes: 716800
Path table size(bytes): 4924
Max brk space used 20e000
220245 extents written (430 MB)
scsidev: 'sr0'
devname: 'sr0'
scsibus: -2 target: -2 lun: -2
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
TOC Type: 3 = CD-ROM XA mode 2

jasmac · Joined: 03 Jun 2009 Posts: 62 Location: Canberra, Australia

Hey Taz,

Been a fair while since I have checked, you are still doing great work. I will be updating my usb once I get some time. This release sounds pretty sweet. Your LHP always travels with me and is never far away when I need it and is still working great. I have not been doing any new backgrounds, I have taken up photography and am trying to make something of it. I am on dA, feel free to grab anything that you like from it and if there is anything there that you like but I have not put up a suitable size just let me know and I will send you the full size so you can do what you want with it. Keep up the work mate much appreciated.

Cheers

Jason

http://jamcpics.deviantart.com/gallery/

tazoc · Posted: Fri 20 May 2011, 12:59 Post subject:

Hi Jason,
Very nice photography there--after a hard day of coding and debugging it was relaxing to sit back and browse your latest work. I especially liked Are you Eyeballing Me Boy and My Pooch. I'd like to see a color pic of your puppy and include both in a future release. Bee in Blue is a stunning display of color and detail.
Thanks for sharing these!
TazOC

jasmac · Joined: 03 Jun 2009 Posts: 62 Location: Canberra, Australia

Hey Taz,

Thanks, the one of my pooch is actually a b/w photo, unfortunately I don't have a colour one, well I don't think I took a colour one, I will have a look through and see. I have just put up another one of both my dogs that is in colour that you may also like.

Cheers

Jason

gcmartin · Joined: 14 Oct 2005 Posts: 2640 Location: Earth

Double post. how to delete?

gcmartin · Joined: 14 Oct 2005 Posts: 2640 Location: Earth

@TazOC

Live media Mariner start up with SAMBA SFS added to media (before boot), and I can see the LightHouse boot configuration manager pick up all the SFS files and load them during boot. But, unfortunately, once at desktop, the system does NOT seem to have SAMBA 'installed" when I get to desktop. Mariner is there; FF is there; but not SAMBA. I see the couple of stops before getting to desktop on 1st boot, but, don't know where to point the finger as to why SAMBA is not present and ready to work, when using this SFS method of starting a fresh system is used.

Note: SAMBA works PERFECTLY when I start without adding SAMBA SFS at boot selection and then use your desktop tool to add SAMBA to the system after desktop start and after adding update fixes using the same tool.

So, it appears that the PET is perfect, but something a little off when 1st booting with a Live media that has the SAMBA SFS added.

If its a startup procedural thing, I have not found proper path and could probably use a little guidance.

Hope this helps

Barburo · Joined: 14 Jun 2007 Posts: 275

Hi Taz,
I updated Firefox through the automatic upgrade to version 4 and it is much faster than the 3.x versions.
It made me wonder whether Chrome was worth a look so I included the .sfs file for Chrome and rebooted.
I seem to have the same result as HiDeHo - Chrome starts to load pages then crashes.
I tried the fix several times (deleting the default folder from .config) but it doesn't work for me.
Chrome tries to load a page - you can see it start to load - then the sad face and message that it failed.

The only pages I got to load properly were the Google web page and Google Calendar. It fails on the Gmail page and all others.
I am running .sfs files for KDE and Mariner, with C-F, Firefox,Java, LibreOffice and Xfce.
I successfully downloaded an old version from Slackware12.eu :
google-chrome-4.0.202.2-i386-1as.tgz
which the PPM intercepted and installed for me. It seemed to work OK, so I uninstalled it and tried again with the .sfs file.
Still crashes.
Any ideas?

tazoc · Posted: Sun 29 May 2011, 23:22 Post subject: Re: Chrome Browser

HiDeHo · Joined: 16 Mar 2011 Posts: 262

Hi i am building a puplet from 525 i just want to know what you did to give 40 sfs files to Lighthouse pup, and if its an easy to do. i am not into programming or html or things like that but am willing to give it a go

i have started a post here about it too http://www.murga-linux.com/puppy/viewtopic.php?p=532020#532020

tazoc · Posted: Wed 08 Jun 2011, 13:44 Post subject:

l2ulinux · Joined: 25 Jan 2011 Posts: 148 Location: Blountstown, Fl.

I have used your PUPPY Release for about six months and I wanted to say. THANKS FOR YOUR HARD WORK AND TIME SPEND TO DO THIS.

Operating System
Version
Kernel Linux 2.6.33.2 (i686)
Compiled #1 SMP Mon Apr 5 12:55:04 Local time zone must be set--see zic m
C Library GNU C Library version 2.11.1 (stable)
Default C Compiler Unknown
Current Session
Computer Name Mariner
User Name root (root)
Home Directory /root
Desktop Environment Unknown (Window Manager: JWM)
Misc
Uptime 3 hours, 59 minutes
Load Average 0.00, 0.00, 0.00

don570 · Joined: 10 Mar 2010 Posts: 2473 Location: Ontario

I was surprised to find that my version of Egg Recorder
works on Lighthouse 503g.
It has a beautiful interface on Lighthouse!!!

It's a simple audio recorder, meant to be a replacement for precord.

Try it out...

http://www.murga-linux.com/puppy/viewtopic.php?p=535213&sid=a5178a0fd53e3b16fffed19a5e830ddc

_______________________________________________

Jim1911 · Joined: 19 May 2008 Posts: 2353 Location: Texas, USA

Hi TazOC,

Bibletime 8.1 is a bugfix release that appears to have solved the problem of displaying all resources. If you get a chance please take a look at it. There may even be a 64 bit version available.

The screenshot is from Ubuntu 11.04, 64 bit version.

Cheers,
Jim

algyzas · Joined: 24 Nov 2008 Posts: 21

I don't like this thing. So complex, not so many people working on it, so bugs, bugs... Tried 5.03. First of all, Opera did not started at all:

bash-4.1$ opera: XSetLocaleModifiers failed with LC_CTYPE 'lt_LT'
opera: LC_CTYPE changed to 'POSIX'

<spot> ~

Yes, really POSIX, I saw this DIY Linux thing a lot. It is probably because I chosed non en_US locale, that's why this panic. But c'mon, not everybody is living in US. Then I tried package manager:

bash-4.1$ sudo su

# gslapt
Failed to open package_data
package_data: No such file or directory
Perhaps you want to run --update?
Failed to download: Couldn't resolve host name
Failed to download: Couldn't resolve host name
Failed to download: Couldn't resolve host name
Failed to download: Couldn't resolve host name
Failed to download: Couldn't resolve host name
Failed to download: Couldn't resolve host name
Failed to download: Couldn't resolve host name
<root> ~

It couldn't resolve host name. So first impressions are - browser is not working, package manager is not working also. Deleted.