clamav-0.97.3-i386.pet - 528

Antivirus, forensics, intrusion detection, cryptography, etc.
Message
Author
User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

New Upload Link

#21 Post by yorkiesnorkie »

*******
UPDATE
******

MARCH 19, 2011

The link to upload the pet has been moved to the first post.

Y.
Last edited by yorkiesnorkie on Sat 19 Mar 2011, 14:39, edited 1 time in total.
[url]http://www.busygamemaster.com[/url]

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

Docs

#22 Post by yorkiesnorkie »

*******
UPDATE
*******

MARCH 19, 2011

The doc man pages are built into the pet.
Last edited by yorkiesnorkie on Sat 19 Mar 2011, 14:45, edited 1 time in total.
[url]http://www.busygamemaster.com[/url]

User avatar
dalebednell
Posts: 120
Joined: Fri 12 Feb 2010, 09:44
Location: portugal
Contact:

clamav

#23 Post by dalebednell »

Hi yorkiesnorkie
Thanks for the pet of clamav i tried to update with freshclam but i get a message outdated clamav i tried one more time and got this message
# freshclam
ClamAV update process started at Mon Feb 28 19:32:04 2011
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.96.1 Recommended version: 0.97
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cld is up to date (version: 53, sigs: 846214, f-level: 53, builder: sven)
daily.cld is up to date (version: 12792, sigs: 60705, f-level: 60, builder: neo)
bytecode.cvd is up to date (version: 140, sigs: 40, f-level: 58, builder: edwin
What can i do to update this version. I did go to the site and read but unsure how to upgrade can you help plz Thanks!



Dale

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

ClamAV

#24 Post by yorkiesnorkie »

Hi Dalebednell,

It looks like they upgraded the version! I'll have to download the tar.gz file and re-compile the new version. There's some work involved so I'll post a new version when it's ready. Stay tuned!

Yorkiesnorkie
:)
[url]http://www.busygamemaster.com[/url]

User avatar
dalebednell
Posts: 120
Joined: Fri 12 Feb 2010, 09:44
Location: portugal
Contact:

clamav

#25 Post by dalebednell »

Hi yorkiesnorkie
Thanks for the this clam it works well great job look forward to the update.
Thanks again




Dale

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

Re: clamav

#26 Post by yorkiesnorkie »

dalebednell wrote:Hi yorkiesnorkie
Thanks for the this clam it works well great job look forward to the update.
Thanks again




Dale
Hi Dale,

I compiled the new version on the weekend, after jumping through a couple of hoops. :) I forgot what I did the last time but the good news is that it is done. I just need to run a couple of tests before I upload it.

I use Puppy 431 so the application is compiled for i386 against that release. I don't use Puppy 5.20.

The new Pet package will be 31 mb and it will have everything in it, including the documentation. I'm pre-configuring the freshclam.conf file, so that will work from the start, but I'm leaving most of the conf file customizations to the end users.

I'm also documenting the process in Abiword and I'll upload that file too so anyone can figure out how to compile it.

I'll probably upload in the next day or so after I've completed my tests, and I'll post the link here.

Yorkiesnorkie
:-)
[url]http://www.busygamemaster.com[/url]

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

Testing Completed

#27 Post by yorkiesnorkie »

Hi,

Just a little update. I've completed my testing on ClamAV 0.97, got my document on compiling ready, run freshclam, and a scan.

Based on that I'm going to pre-configure the freshclam.conf file but not the clamd.conf file.

I don't use the daemon feature myself, which makes me wonder if anyone here is using the server tool either. At the moment I've made a complete package but I could trim the fat so to speak. I might make a second smaller package.

Report on Testing:

During my tests, a clamscan of my Puppy Frugal install it picked up the eicar test file related to the fprot installation. As you may or may not know Puppy 43x comes with fprot and xfprot as an installable option from the menu. I've never been able to get the xfprot interface to work. However fprot will work from the command line. Finding this supposedly infected file gave me pause for a moment until I remembered what it was. so if you do a clamscan of your Puppy installation don't be surprised when ClamAV picks it up.

I also scanned a windows partition and picked up a trojan in "super.exe" that I didn't know about which I'll be sending in to the ClamAV folks later. Super is a windows application that converts video file formats.

Intentions:

I should have the 0.97 version of ClamAV uploaded sometime this weekend, and I'll post the link here. I'll be removing the link to 0.96 after that, and deleting it from where it was stored.

I'll also separately post my instructions on compiling, and a pre-configured freshclam.conf file for those of you who may want them.

I'm going to take a look at compiling the Klamav GUI tool after that. I run ClamAV from the command line but it might be nice to have a GUI tool.

Yorkie
:-)
[url]http://www.busygamemaster.com[/url]

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

New Pet for ClamAV 0.97 Available

#28 Post by yorkiesnorkie »

Hi!

Note that I've moved all the links to the new files in the first post. It's easier to maintain all the links in one spot!

The new clamav 0.97 pet is a full build. The freshclam.conf file is pre-configured so you can open rxvt and update it with "freshclam".

The freshclam.conf file is included in the pet but I'm enclosing it also as a separate link for reference.

Note that I did not configure clamd.conf. I do not start and run the daemon myself so I figure configuring it is best left to experts. I left it in the build in case some of you are using servers.

Lastly, I've included my tutorial which describes how to compile clamav and has an examples on how to update freshclam and use clamscan.

Suggestions welcomed.

Enjoy,

Yorkiesnorkie
[url]http://www.busygamemaster.com[/url]

User avatar
dalebednell
Posts: 120
Joined: Fri 12 Feb 2010, 09:44
Location: portugal
Contact:

clamav-0.97-i386.pet - For Puppy Linux 4.3.1

#29 Post by dalebednell »

Hi
well what can i say works a treat it's scanning now i notice you have for puppy linux 4.31 i use 5.1.1 and all is fine so far thanks again



Dale

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

#30 Post by yorkiesnorkie »

Hi Dale,

That's great, yes I'm running puppy 431 so that is what I compiled it in, but it's good to know that it works with the Puppy 5xx series.

Yorkie
:-)
[url]http://www.busygamemaster.com[/url]

User avatar
dalebednell
Posts: 120
Joined: Fri 12 Feb 2010, 09:44
Location: portugal
Contact:

clamav-0.97-i386.pet

#31 Post by dalebednell »

Hi yorkiesnorkie
just installed your clamav pet on puppy 525 and updated the virus database all fine for now i will run a scan on my windows partition at the week end and let you know the results then.



Thanks again
Dale

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

#32 Post by yorkiesnorkie »

Hi Dale,

Cool, I'm glad the pet is working for you. Just remember that ClamAV doesn't fix anything, it only detects and if you tell it to, removes files to quarantine. If you use the remove feature be careful.

Yorkie
:-)
[url]http://www.busygamemaster.com[/url]

User avatar
dalebednell
Posts: 120
Joined: Fri 12 Feb 2010, 09:44
Location: portugal
Contact:

clamav-0.97-i386.pet

#33 Post by dalebednell »

Hi yorkiesnorkie

That's ok i know it removed avg last time but i'm careful so no problem


Dale :lol:

gcmartin

Could not install

#34 Post by gcmartin »

Tried download and install to a latest PUP528 Lucid from Playdayz.

Failed. Ideas would be appreciated.

Thanks in advance
EDIT: Tried to download using Chrome Browser on several ocasions. In EACH CASE, the download is being terminated on the other end for some reason, just prior to completion. Thus, I'm getting incomplete downloads, too. Maybe you might know why???
SOLVED The problem has cleared???
Attachments
CLAM installation failure.png
CLAM installation failure
(13.84 KiB) Downloaded 5134 times

gcmartin

First Post in this thread - FreshClam

#35 Post by gcmartin »

Are you aware that FreshClam selection in your first post does NOT work?

Hope this helps

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

Re: Could not install

#36 Post by yorkiesnorkie »

gcmartin wrote:Tried download and install to a latest PUP528 Lucid from Playdayz.

Failed. Ideas would be appreciated.

Thanks in advance
EDIT: Tried to download using Chrome Browser on several ocasions. In EACH CASE, the download is being terminated on the other end for some reason, just prior to completion. Thus, I'm getting incomplete downloads, too. Maybe you might know why???
SOLVED The problem has cleared???
Your attempting to install the pet, which was built with Puppy Linux 431, in 528. The pet was not compiled for 528. So, I can't guarantee it'll work 100%.

I'm not sure about the other problems with Chrome. It may be the host where the pet is or it could be the browser. You would have to follow up with the 528 posts and see if there are any reported errors.

Y.
[url]http://www.busygamemaster.com[/url]

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

Re: First Post in this thread - FreshClam

#37 Post by yorkiesnorkie »

gcmartin wrote:Are you aware that FreshClam selection in your first post does NOT work?

Hope this helps
Since your running Puppy 528 I can't guarantee that the Pet compiled for 431 will work with your version. I do know that Freshclam did work when the pet was originally compiled and installed in Puppy Linux 431.

It may require a new version compiled for 528. If you feel really adventurous you can always try re-compiling the application yourself. I'm not running 528.

Y.
[url]http://www.busygamemaster.com[/url]

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

Don't Panic ClamAV 0,97.0

#38 Post by yorkiesnorkie »

The pet I made of ClamAV is currently version 0.97.0, therefore Freshclam will report that the ClamAv needs to be updated. Don't Panic! I just need to recompile the pet using the latest source.

Note that this pet currently installs on Puppy 527 without any difficulty. I installed the pet and ran Freshclam and it did update its DB.

Code: Select all

sh-4.1# freshclam
ClamAV update process started at Tue Dec 27 12:14:19 2011
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.97 Recommended version: 0.97.3
DON'T PANIC! Read http://www.clamav.net/support/faq
Downloading main-54.cdiff [100%]
main.cld updated (version: 54, sigs: 1044387, f-level: 60, builder: sven)
WARNING: getfile: daily-12639.cdiff not found on remote server (IP: 200.236.31.1)
WARNING: getpatch: Can't download daily-12639.cdiff from database.clamav.net
WARNING: getfile: daily-12639.cdiff not found on remote server (IP: 24.215.0.24)
WARNING: getpatch: Can't download daily-12639.cdiff from database.clamav.net
WARNING: getfile: daily-12639.cdiff not found on remote server (IP: 208.70.244.158)
WARNING: getpatch: Can't download daily-12639.cdiff from database.clamav.net
WARNING: Incremental update failed, trying to download daily.cvd
Downloading daily.cvd [100%]
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
daily.cvd updated (version: 14195, sigs: 54474, f-level: 63, builder: guitar)
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Current functionality level = 60, recommended = 63
DON'T PANIC! Read http://www.clamav.net/support/faq
Downloading bytecode.cvd [100%]
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
bytecode.cvd updated (version: 158, sigs: 38, f-level: 63, builder: edwin)
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Current functionality level = 60, recommended = 63
DON'T PANIC! Read http://www.clamav.net/support/faq
[LibClamAV] ******************************************************
[LibClamAV] ***      Virus database timestamp in the future!   ***
[LibClamAV] ***  Please check the timezone and clock settings  ***
[LibClamAV] ******************************************************
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
Database updated (1098899 signatures) from database.clamav.net (IP: 208.70.244.158)
sh-4.1#
[url]http://www.busygamemaster.com[/url]

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

Looking ahead...

#39 Post by yorkiesnorkie »

Hi gcmartin,

I installed the current pet of ClamAV 0.97.0 and it reports the build needs to be updated to 0.97.3. But, it does install, freshclam works etc., on Puppy 5.2.7. It reports that the build needs to be updated, but it works.

My current install is the 527 Ubuntu compatible build. If your going to use Slacko for example, it would have to be built for slackware on that version using the devx for that. Since you've got a bunch of builds going, which one do you use the most? I have no plans to make a bunch of builds. Hence the tutorial I posted for DIY.

My plan is to stick with the Ubuntu compatible builds, so for 528 for example I'd need to install a new frugal build, but I'd have to do some backup first.

Greg
[url]http://www.busygamemaster.com[/url]

User avatar
yorkiesnorkie
Posts: 504
Joined: Mon 04 Jun 2007, 13:11
Location: George's Island

New Pet

#40 Post by yorkiesnorkie »

A new pet of 0.97.3 has been created compiled under 528 for i686, see the first post.
[url]http://www.busygamemaster.com[/url]

Post Reply