spup-121.02 pre-alpha3 based on 13.37

Message

#21 Post by **ttuuxxx** » Tue 03 May 2011, 01:19

01micko wrote:just use the search box

I have that was the first thing I did

must be a www repo link, I don't mind searching manually
ttuuxxx

01micko · #22 Post by **01micko** » Tue 03 May 2011, 01:28

rcrsn51, I found Patriot's pet and printing is ok now, thanks.

ttuuxxx, I just checked, pasting those libs into PPM searchbox and they show up, they're in the main slackware repo, but don't show because they are building blocks. That category should still be there IMO, Barry enabled "all" for wary/quirky only, doesn't work with others as it's way too slow.

#23 Post by **ttuuxxx** » Tue 03 May 2011, 01:30

cool I have them all now

ttuuxxx

#24 Post by **ttuuxxx** » Tue 03 May 2011, 01:35

Xchat is in the wrong menu, it can be found under network, where it should be under Internet, maybe just change/update the .desktop
ttuuxxx

Lobster · #25 Post by **Lobster** » Tue 03 May 2011, 01:37

01micko wrote: Lobster, can you run the command in the first post on your radeon? Any puppy will give the same result.

I hope the enclosed pic is what you want

playdayz · #26 Post by **playdayz** » Tue 03 May 2011, 01:44

Right to the desktop.

VGA compatible controller : ATI Technologies Inc RV670PRO [Radeon HD 3850]

All of the radeon drivers loaded. Looks fine. We are supposed to wait for glx/dri?

That is not your (i.e Spup) Menu -> Setup -> Video Setup Wizard is it?

I love the Audio control to set the default audio card. That is very useful if you have more than one because very few programs allow you to say which audio card they should send the sound to--they just assume default..

01micko · #27 Post by **01micko** » Tue 03 May 2011, 01:53

Lobster.. yes that's the one

thanks

playdayz... I'll have to disable that video wizard, will use quickpet method eventually. Get mesa from PPM (slackware, works ok)
The sound wizard is kirk's, Barry has it in woof now by default.

#28 Post by **ttuuxxx** » Tue 03 May 2011, 02:16

Here's the latest Transmission with static libevent
I also added an item to mailcap and added it to rox mimes-types, so its fully configured to open torrents either when the browser ask you to open with? or save the torrent, and open it by clicking on it.
ttuuxxx

transmission-2.30b4-i486|transmission|2.30b4-i486||Internet|1012K||transmission-2.30b4-i486.pet||Download and share files over BitTorrent|slackware|13.37||

#29 Post by **ttuuxxx** » Tue 03 May 2011, 02:19

And if you want to add a static libevent to the devx, here's the static one I compiled. Its not needed to run transmission, only to compile it.
But its usefull for other apps.
ttuuxxx

libevent_DEV-2.0.11-stable-i486|libevent_DEV|2.0.11-stable-i486||BuildingBlock|1040K||libevent_DEV-2.0.11-stable-i486.pet||dep|slackware|13.37||

aarf · #30 Post by **aarf** » Tue 03 May 2011, 02:59

pupdail is failing.

--> The PPP daemon has died. (exit code = 127)

failed wvdail from spup120

[Dialer Defaults]
Modem = /dev/ttyACM0
#Modem = /dev/ttyACM1
Baud = 57600
Init1 =
Init2 = ATZ
Init3 = ATQ0V1E1S0=0&C1&D2+FCLASS=0
Carrier Check = no
Dial Command = ATDT

[Dialer isp1]
Phone = *99#
Username = MYUSERNAME
Password = MYPASSWORD
Auto Reconnect = yes

[Dialer isp1apn]
Init5 = AT+CGDCONT=1,"IP","internet"

[Dialer isp2]
Phone = MY2ISPPHONENUM
Username = MY2USERNAME
Password = MY2PASSWORD
Auto Reconnect = yes

[Dialer isp2apn]
Init5 = AT+CGDCONT=1,"IP",""

[Dialer pin]
Init1 = AT+CPIN=

[Dialer wireless]
#To force only 2G or 3G, uncomment the Init4 line and append 0 (2G) or 2 (3G), and substitute your operator's name for MYOPS.
#Init4 = AT+COPS=0,0,"MYOPS",
#Init6-Init9 lines are available for user purposes; the commented examples can be used as described:
#To force the 3G quality of service level, uncomment the Init6/Init7 line pair and set value two places each, for 384k/144k/64k, omitting the "k" (e.g., =1,4,64,384,64,384).
#To list all the APNs stored in the modem, uncomment the Init8 line; check the Connection status log for lines beginning with +CGDCONT:.
#To list the operator identifier stored in the modem, uncomment the Init9 line; check the Connection status log for a line beginning with +COPS:.
#Init6 = AT+CGEQMIN=1,4,64,384,64,384
#Init7 = AT+CGEQREQ=1,4,64,384,64,384
#Init8 = AT+CGDCONT?
#Init9 = AT+COPS?

connected in puppeee4.4rc2

[Dialer Defaults]
Modem = /dev/ttyACM1
#Modem = /dev/ttyACM2
Baud = 460800
Init1 =
Init2 = ATZ
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Carrier Check = no
Dial Command = ATDT

[Dialer isp1]
Phone = *99#
Username = MYUSERNAME
Password = MYPASSWORD
Auto Reconnect = yes

[Dialer isp1apn]
Init5 = AT+CGDCONT=1,"IP","internet"

[Dialer isp2]
Phone = MY2ISPPHONENUM
Username = MY2USERNAME
Password = MY2PASSWORD
Auto Reconnect = yes

[Dialer isp2apn]
Init5 = AT+CGDCONT=1,"IP",""

[Dialer pin]
Init1 = AT+CPIN=

[Dialer wireless]
#To force only 2G or 3G, uncomment the Init4 line and append 0 (2G) or 2 (3G), and substitute your operator's name for MYOPS.
#Init4 = AT+COPS=0,0,"MYOPS",
#Init6-Init9 lines are available for user purposes; the commented examples can be used as described:
#To force the 3G quality of service level, uncomment the Init6/Init7 line pair and set value two places each, for 384k/144k/64k, omitting the "k" (e.g., =1,4,64,384,64,384).
#To list all the APNs stored in the modem, uncomment the Init8 line; check the Connection status log for lines beginning with +CGDCONT:.
#To list the operator identifier stored in the modem, uncomment the Init9 line; check the Connection status log for a line beginning with +COPS:.
#Init6 = AT+CGEQMIN=1,4,64,384,64,384
#Init7 = AT+CGEQREQ=1,4,64,384,64,384

James C · #31 Post by **James C** » Tue 03 May 2011, 03:10

01micko wrote: Things to test

*gparted
*grub
*grub4dos
*full installs
*usb
*ntfs/windows partitions
*keyboard

I was attempting to test a full install of 120 but......... Gparted failed.
I deleted the existing partitions and swap but when trying to create new partitions the filesystem choices were greyed out.
Using a Lucid disc at the moment to partition the drive........successfully completed.

Back in a few, let's see if a full install with Grub works.

EDIT:

Grub did not work either. Clicking "simple" led instead to the "expert" menu which was stuck in a loop. Used Grub4dos and booted into the full install of 120.
No wallpaper, gray background with dreaded red/white triangles instead of icons.

EDIT 2:
Just to be certain I tried a full install again, same result.

#32 Post by **ttuuxxx** » Tue 03 May 2011, 03:35

Hi mick

Do you have a file list of what files/versions were installed on slackware13.37 , That would be very handy when compiling, so I could easily match the dep versions.
ttuuxxx

01micko · #33 Post by **01micko** » Tue 03 May 2011, 03:51

Hi ttuuxxx

If you look in /root/.packages you'll see Packages-slackware-13.37-official, plus the salix version and the spup version, plus there are some quirky libs that need upgrading. Ypu can cross reference with /root/.packages/woof-installed-packages.

Woof reads these files to build the distro and PPM reads them for the PPM.

Hope that's got what you need, should have

rcrsn51 · #34 Post by **rcrsn51** » Tue 03 May 2011, 04:11

The problems in spup-100 with the Samba client package have been resolved in spup-120. You can now connect to a Windows shared printer.

James C · #35 Post by **James C** » Tue 03 May 2011, 04:20

James C wrote:
01micko wrote: Things to test

*gparted
*grub
*grub4dos
*full installs
*usb
*ntfs/windows partitions
*keyboard
I was attempting to test a full install of 120 but......... Gparted failed.
I deleted the existing partitions and swap but when trying to create new partitions the filesystem choices were greyed out.
Using a Lucid disc at the moment to partition the drive........successfully completed.

Back in a few, let's see if a full install with Grub works.

EDIT:

Grub did not work either. Clicking "simple" led instead to the "expert" menu which was stuck in a loop. Used Grub4dos and booted into the full install of 120.
No wallpaper, gray background with dreaded red/white triangles instead of icons.

EDIT 2:
Just to be certain I tried a full install again, same result.

Just did a frugal install of 120 with the installer.....no problems.I even have wallpaper and icons this time.

Sound, internet and display all good.

EDIT:
Need to reset the time every reboot but the timezone stays correct.

01micko · #36 Post by **01micko** » Tue 03 May 2011, 04:27

Thanks rcrsn51... that was a fluke, but I'll take it!

~

seamonkey-2.0.13 and 2.0.14 will not compile

.. it's a known issue with the the later gcc... can't find a patch as yet.

Compiled seamonkey-2.1b3.. it's a huge 20M pet

... (the slack txz is over 18M).. and I chopped a little bit out of it. I'll have another go with more "--with-system-(package)" to see if I can get it smaller. but how much will seamonkey come down from 20M

will not be much I bet, probably not enough, so we may end up with a firefox distro, not a bad thing, just need to find small replacements for some things. Will recompile firefox too, at least that should be a respectable size.. .

James, thanks for that. If you want to save your full install, run gdk-pixbuf-query-loaders --update-cache. I can fix that one

#37 Post by **ttuuxxx** » Tue 03 May 2011, 04:31

here's epdfview with a few updated icons

#38 Post by **ttuuxxx** » Tue 03 May 2011, 04:55

Hi mick If I have sometime I'll look at Seamonkey. Also below is a fix for poppler dev files, just add it to the poppler dev files you have, without it, you can't compile epdfview.
ttuuxxx

Lobster · #39 Post by **Lobster** » Tue 03 May 2011, 05:02

Too small Seamonkey? Too old?
http://bkhome.org/blog/?viewDetailed=02238

bigpup · #40 Post by **bigpup** » Tue 03 May 2011, 06:12

Here is some static builds of Firefox and Seamonkey.
http://www.lamarelle.org/mo-zi-lla/mozilla.php#smf

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum

spup-121.02 pre-alpha3 based on 13.37

Re: spup-120 pre-alpha based on 13.37

Re: spup-120 pre-alpha based on 13.37