spup-100 April 2011
Re: libraries missing
exactly what i did though.. this is a frugal install01micko wrote:Where on earth did you get your firefox package?turf wrote:i installed firefox and dependencies shows
missing libs:
libmozalloc.so
libmozsqlite3.so
libxul.so
where can i get these libs and how can i add them?
If you go to the PPM (puppy package manager, menu>setup>) you'll see a button for the spup repo. Enable that, choose the Internet category and get Firefox, no dependency issues, posting from said now, and it's Firefox 4.
i guess its not missing after all but what are they for?
- Attachments
-
- firefoxdep.png
- (21.04 KiB) Downloaded 2241 times
@turf
reread the message
I spent some weeks trying to find packages that needed a couple of "missing libraries".
Eventually, I read the message extra carefully again and again, after about the 20th time, it clicked.
In actual fact it's telling you that there are a couple of extra libs in your puppy that are not in the lib path statement. I suspect that they are installed as you may need them if you turn on certain functions in the system or an application you have either by default or have installed in which case their startup scripts should add them if necessary. My take on it anyway!
a puppy quirk
regards
scsijon
reread the message
I spent some weeks trying to find packages that needed a couple of "missing libraries".
Eventually, I read the message extra carefully again and again, after about the 20th time, it clicked.
In actual fact it's telling you that there are a couple of extra libs in your puppy that are not in the lib path statement. I suspect that they are installed as you may need them if you turn on certain functions in the system or an application you have either by default or have installed in which case their startup scripts should add them if necessary. My take on it anyway!
a puppy quirk
regards
scsijon
- Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
As the issue was intermittently (sometimes hours without a problem) I didn't install the stay connected pet yet.rcrsn51 wrote:The original stay-connected is here. I'm a little surprised that it has gone from being a quick fix to a standard Puppy wifi repair tool.Béèm wrote:peebee, I forgot about that one.
Hopefully it'll work in spup being made for lucid as far as I see.
But for me it masks the underlying problem.
Here is my (limited) understanding of the issue. Some wireless routers periodically poll their clients to see if they are still active. Some clients, when idle, won't respond. So the connection is dropped. I don't know if this is a function of the client's wifi adapter driver or WEP/WPA or something else.
Up to now I had the issue some 10-15 times and in 2 cases even during a download.
I activated stay-connected now and will watch again during a similar period and report back.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Hi Mick,
I've finally gotten around to checking out spup-100. After over a month with no puppy, I was starting to have withdrawal symptoms. It's great, everything works fine on my hardware with both frugal and hd installations.
Thank you for all the hard work that you've put into it and keep sharing with us. I'm happy that you will probably be leading up the follow on 5.3 and am looking forward to helping test it.
Thanks again,
Jim
I've finally gotten around to checking out spup-100. After over a month with no puppy, I was starting to have withdrawal symptoms. It's great, everything works fine on my hardware with both frugal and hd installations.
Thank you for all the hard work that you've put into it and keep sharing with us. I'm happy that you will probably be leading up the follow on 5.3 and am looking forward to helping test it.
Thanks again,
Jim
ENE Card Reader Module for Slack Pup
I have made a pet package of the keucr module for the ENE Card Reader found on some Acer Aspire One models. I compiled the module on a frugal install of Spup-100 on my Acer Aspire One AOD255-2301.
I am making this pet available for testing. It works quite well on my Aspire One. I reformatted the hard drive and performed a clean install of Spup-100 after I successfully compiled the module and created the .pet package. I installed the package on the fresh install and it worked the charm.
I did not have to reboot after installation of this package. I did have to wait a patiently for a moment for the card to be detected. If for some reason your card is not detected please try rebooting.
Feedback will be appreciated. Thank you.
I am making this pet available for testing. It works quite well on my Aspire One. I reformatted the hard drive and performed a clean install of Spup-100 after I successfully compiled the module and created the .pet package. I installed the package on the fresh install and it worked the charm.
I did not have to reboot after installation of this package. I did have to wait a patiently for a moment for the card to be detected. If for some reason your card is not detected please try rebooting.
Feedback will be appreciated. Thank you.
- Attachments
-
- keucr_2.6.34.1-spup100.pet
- ENE Card Reader for Slack Pup compiled on an Acer Aspire One AOD255-2301 and spup-100.
- (29.21 KiB) Downloaded 641 times
keucr pet
Hi, dawnsboy, it worked after rebooting my netbook.
Thank you very much.
myke
Thank you very much.
myke
AA1 D255E-keucr slacko 5.3;luci;mijnpup; tw-os; with:Emacs,gawk,noteboxmismanager,treesheets, freeplane, libreoffice, tkoutline, Sigil, calibre, calendar. magic&Noteliner(wine), kamas (DOS)
- Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
spup100 strange partition issue
I have a USB stick partitioned like: in the picture.
However when I issue fdisk -l /dev/sdc I getStrange that I get some error indications.
I can use the USB stick without problem.
A problem in fdisk in spup?
However when I issue fdisk -l /dev/sdc I get
Code: Select all
# fdisk -l /dev/sdc
Disk /dev/sdc: 8015 MB, 8015314944 bytes
247 heads, 62 sectors/track, 1022 cylinders
Units = cylinders of 15314 * 512 = 7840768 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00044eaa
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 274 2096451 b W95 FAT32
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(0, 1, 1) logical=(0, 1, 2)
Partition 1 has different physical/logical endings:
phys=(260, 254, 63) logical=(273, 197, 29)
Partition 1 does not end on cylinder boundary.
/dev/sdc2 275 548 2097152 83 Linux
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(261, 53, 49) logical=(274, 5, 7)
Partition 2 has different physical/logical endings:
phys=(522, 75, 1) logical=(547, 224, 10)
Partition 2 does not end on cylinder boundary.
/dev/sdc3 548 1023 3632128 7 HPFS/NTFS
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(522, 75, 2) logical=(547, 224, 11)
Partition 3 has different physical/logical endings:
phys=(974, 120, 42) logical=(1022, 64, 36)
Partition 3 does not end on cylinder boundary.
#
I can use the USB stick without problem.
A problem in fdisk in spup?
- Attachments
-
- spup-gparted-sdc.png
- (76.91 KiB) Downloaded 1930 times
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
- Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
Well it didn't take that long to have my connection cut, so with stay-connected activated and in fact I was downloading. I redid the connection setup and could work until today, an hour and a half ago, when I got connection cuts. When redoing the setup could work for a couple of minutes.Béèm wrote:As the issue was intermittently (sometimes hours without a problem) I didn't install the stay connected pet yet.rcrsn51 wrote:The original stay-connected is here. I'm a little surprised that it has gone from being a quick fix to a standard Puppy wifi repair tool.Béèm wrote:peebee, I forgot about that one.
Hopefully it'll work in spup being made for lucid as far as I see.
But for me it masks the underlying problem.
Here is my (limited) understanding of the issue. Some wireless routers periodically poll their clients to see if they are still active. Some clients, when idle, won't respond. So the connection is dropped. I don't know if this is a function of the client's wifi adapter driver or WEP/WPA or something else.
Up to now I had the issue some 10-15 times and in 2 cases even during a download.
I activated stay-connected now and will watch again during a similar period and report back.
I repositioned a bit my access point and that seemed to work for a while, but the connection cuts started again. At a certain point I couldn't even setup anymore and did a reboot.
That worked a while, but I did get a cut again.
So I don't know what happens.
And don't know what tools I could use to diagnose further.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
geany print problem
sorry mick,
try this:
create (copy) a 3 or 4 page doc
goto print
goto page setup
change scale to less than 100% (I used 80)
goto preview
it's showing the data for a single page shrunk on that page rather than the data shrunk for the page with more data onpage therefore less pages used.
going back and printing it gets this same reaction too, same number of pages with data shrunk.
maybe a geany problem or the printing system, don't know which but it's a neusance. Or maybe i'm using the wrong settings?
regards
scsijon
try this:
create (copy) a 3 or 4 page doc
goto print
goto page setup
change scale to less than 100% (I used 80)
goto preview
it's showing the data for a single page shrunk on that page rather than the data shrunk for the page with more data onpage therefore less pages used.
going back and printing it gets this same reaction too, same number of pages with data shrunk.
maybe a geany problem or the printing system, don't know which but it's a neusance. Or maybe i'm using the wrong settings?
regards
scsijon
FF4 has it coveredpemasu wrote:Firefox can sometimes give you some trouble. But The Chosen One is real beast. Firefox is no match to it.
http://alanbecker.deviantart.com/art/An ... I-50891749
Spup Frugal HD and USB
Root forever!
Root forever!
Couple Tests
Hi Mick!
Finally got around to installing your new 100 version.
It's FAST for sure....
BROWSERS:
(1) Seamonky.... works fine
(2) Chromium-11.... works fine
(3) Iron 6-7-8.... will NOT work, none of them. Was thinking, Iron doesn't track your IP like all the others, could that be it? Sure has me baffled as Iron works in every other puppy I have!
Printer:
(1) Scanner works beautiful with xsane.
(2) Printer: Works but... you have to un-plug the power then re-plug it back in which is a total pain. It will not print from bootup. (HP Deskjet 1050 All-in-One J410 series)
That's all the problems I encountered so far, everything else seems fine that I used to date.
>>>---Indian------>
Finally got around to installing your new 100 version.
It's FAST for sure....
BROWSERS:
(1) Seamonky.... works fine
(2) Chromium-11.... works fine
(3) Iron 6-7-8.... will NOT work, none of them. Was thinking, Iron doesn't track your IP like all the others, could that be it? Sure has me baffled as Iron works in every other puppy I have!
Printer:
(1) Scanner works beautiful with xsane.
(2) Printer: Works but... you have to un-plug the power then re-plug it back in which is a total pain. It will not print from bootup. (HP Deskjet 1050 All-in-One J410 series)
That's all the problems I encountered so far, everything else seems fine that I used to date.
>>>---Indian------>
Re: Couple Tests
Strange behaviours with USB devices is a "feature" of many new Puppies.sszindian wrote:(2) Printer: Works but... you have to un-plug the power then re-plug it back in which is a total pain. It will not print from bootup. (HP Deskjet 1050 All-in-One J410 series)
Re: Couple Tests
Indian,sszindian wrote:Printer:
(1) Scanner works beautiful with xsane.
(2) Printer: Works but... you have to un-plug the power then re-plug it back in which is a total pain. It will not print from bootup. (HP Deskjet 1050 All-in-One J410 series)
That's all the problems I encountered so far, everything else seems fine that I used to date.
>>>---Indian------>
please check (as i'm on a different workshop at the moment) that you have both of the hp pets (hpijs, hplip) installed, either by woof (part of the default install) or by ppm (you), my hp1055 works without a problem with spup100.
I've still only found the one nusance level bug to date, everything else I normally use is ok.
scsijon
Hi guys
Sorry for lack of answers, been a bit busy, both life and puppy/linux
I'll get into some detail tomorrow with the bug reports.
At the moment I'm posting from the first L33T puppy (spup based on slackware-13.37 ). Of course there's about as many bugs as stars in the sky but it works and I'm online through wireless, no hassles. Boots direct to desktop too.
A note for MHHP, I found some repos.. checkout salix, you'll find PACKAGES.TXT with dep info and an extra repo for 13.37
Cheers!
Sorry for lack of answers, been a bit busy, both life and puppy/linux
I'll get into some detail tomorrow with the bug reports.
At the moment I'm posting from the first L33T puppy (spup based on slackware-13.37 ). Of course there's about as many bugs as stars in the sky but it works and I'm online through wireless, no hassles. Boots direct to desktop too.
A note for MHHP, I found some repos.. checkout salix, you'll find PACKAGES.TXT with dep info and an extra repo for 13.37
Cheers!
Puppy Linux Blog - contact me for access
- MinHundHettePerro
- Posts: 852
- Joined: Thu 05 Feb 2009, 22:22
- Location: SE
And , now you tell me about salix' making their own PACKAGES.TXT with deps .01micko wrote:A note for MHHP, I found some repos.. checkout salix, you'll find PACKAGES.TXT with dep info and an extra repo for 13.37
Cheers!
Didn't think of salix (and they actually released builds of late-pre-release 13.37 slack) and the other derivatives, so, I just installed slack-current a week prior to its release and built the PACKAGES.TXT with deps, using Stabellini's tool - took my, not to modern, computer some 30 hrs to complete (incidentally, obscurely announced here) - non-cunning feet walks twice the distance, or something like that .
Anyway, had two tries at woofing-up a pre-release-13.37spup, but tripped on the xorg hurdle .
Awaiting your xorg-hacks .
Cheers and ta for the salix tip, will come in handy / MHHP
[color=green]Celeron 2.8 GHz, 1 GB, i82845, many ptns, modes 12, 13
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
I also used stabellini's 'pra' and it took awhile on my reasonably fast box .. so I left it overnight and ended up with an 11M file (10.5M of it was whitespace ).MinHundHettePerro wrote:And , now you tell me about salix' making their own PACKAGES.TXT with deps .01micko wrote:A note for MHHP, I found some repos.. checkout salix, you'll find PACKAGES.TXT with dep info and an extra repo for 13.37
Cheers!
Didn't think of salix (and they actually released builds of late-pre-release 13.37 slack) and the other derivatives, so, I just installed slack-current a week prior to its release and built the PACKAGES.TXT with deps, using Stabellini's tool - took my, not to modern, computer some 30 hrs to complete (incidentally, obscurely announced here) - non-cunning feet walks twice the distance, or something like that .
Anyway, had two tries at woofing-up a pre-release-13.37spup, but tripped on the xorg hurdle .
Awaiting your xorg-hacks .
Cheers and ta for the salix tip, will come in handy / MHHP
Oh. I fixed the bug (well worked around) where there is a bunch of +PACKAGE entries for dependencies in processed puppy compliant file (Packages-slackware-13.37-official). I did see your files built from pra too . TFT
In 0setup, line 346
Code: Select all
--- DB_dependencies="`echo -n "$DB_ONELINE" | grep -o ' PACKAGE REQUIRED: .* PACKAGE ' | sed -e 's% PACKAGE %%' | cut -f 2-99 -d ' ' | sed -e 's% [^,]*%%g' | sed -e 's%,%,+%g' | sed -e 's/[^0-9a-zA-Z.+_=,-]//g'`" #100626
--- [ "$DB_dependencies" != "" ]&& DB_dependencies='+'"$DB_dependencies"
+++ DB_dependencies="`echo -n "$DB_ONELINE" | grep -o ' PACKAGE REQUIRED: .* PACKAGE ' | sed -e 's% PACKAGE %%' | cut -f 2-99 -d ' ' | sed -e 's% [^,]*%%g' -e 's%,%,+%g' -e 's/[^0-9a-zA-Z.+_=,-]//g'`" #100626 #110501 speed up sed
+++ [ "$DB_dependencies" != "" ]&& DB_dependencies='+'"$DB_dependencies"
+++ [ "$DB_dependencies" = "+PACKAGE" ]&& DB_dependencies=""
another fix for gdk-pixbuf in /etc/rc.d/rc.update line 74
Code: Select all
--- gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaders
+++ if [ -d /usr/lib/gdk-pixbuf-* ];then gdk-pixbuf-query-loaders --update-cache
+++ else
+++ gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaders
+++ fi
Now xorg is another kettle of fish.
On my first attempt I couldn't get a desktop, tried lots of things but nothing, so I went to the /var/log/Xorg.0.log and openned it with MP, lots of entries so I decided to mount a drive and copy it to a file (I'll attach it just for interest.)
It seems I was missing a crucial file called "evdev" for the keyboard, proving fatal to X, oh btw, from the prompt I just tried to run "X" (which points to Xorg anyways).
So I found evdev, part of a package called xkeyboard-config so I added that to the PKGS_SPECS_TABLE variable and away I went.. end result.. blackscreen! ... no recovery .
So then I tried something... just added the /etc/X11/xkb/rules/evdev file to the tree (extracted from that package).. hey presto! A desktop! So I need to add that to some "xorg_hack.pet".
Now, I got boot to desktop half going.. it works like Barry's in Quirky. Before starting the woof project you need to append :
DISTRO_XORG_AUTO='no'
to the DISTRO_SPECS file in the root of the woof tree.
Don't worry, you are asked later if you want (semi)automatic boot to desktop and it changes that variable to 'yes'. Still trying to look for a neat way to make it fully automatic ala playdayz.
Cheers!
- Attachments
-
- xorgfile.gz
- my error log from xorg
- (5.3 KiB) Downloaded 478 times
Puppy Linux Blog - contact me for access
usb modem
hello
i am trying spup 100 and its great.
i am using a usb modem.
when i enter the pgprs info it connects.
i was wondering if it will auto go to 3g or gprs, whatever signal is strongest?
is their a way to lock it in to 3g?
thank you
timremy
i am trying spup 100 and its great.
i am using a usb modem.
when i enter the pgprs info it connects.
i was wondering if it will auto go to 3g or gprs, whatever signal is strongest?
is their a way to lock it in to 3g?
thank you
timremy