Puplite 5.0

[sc0ttman]

Hi:

I found no references to dial up modems. Does Puplite include a dialer program ? Is there a driver for serial modems?

Err... I'm sooooo not an expert on dialup stuff.. I have not removed any network stuff EXCEPT Roaring Penguin - which is not in Puplite, as it required tcl/tk.

However, you can easily install tcl/tk and roaring penguin through the PPM in Puplite. Or download them direct from the puppy 4 pet packages ibiblio repo.. Link in the first post.

NOTE: You may not need to install tcl/tk at all, as Pupite 5.0 includes jimtcl - a tiny tcl interpreter, which may work.

As for serial modems, if it worked in Puppy 4, it will work here, if it doesn't work in Puppy 4, probably not here either.

Hope that helps Frank.. sorry I can't be more 'useful'.

UPDATE: If you get the k2.6.32.28 version, then anything that works in Wary 5.1 will work as well...

So for serial modems, check the Wary 5 or Puppy 4 compatibility!

[Frank Cox]

Hi Scottman:

That is all I needed to know, if you did not remove it the support for dialup in 4 is as good as it gets.
Thanks

[AndrewG]

Hi
I have a problem with pupsave
I use 400mhz wyse terminal. I've installed puplite on internal 256mb flash memory and created pupsave on external usb pendrive.
This pendrive has 2 partitions
first is vfat, second one is formatted to ext2

1. when booting from internal 256mb flash, pupsave is not loaded
Why???

2. when booting from usb pendrive, I'm able to load pupsave manually. There is a promt during loading
But I have problem during installing any pack. There is an error "... not enought room to uncompress...", like posted here
http://www.murga-linux.com/puppy/viewto ... 7f2716da44

do you have any fix for that ?
thanks in advance

[sc0ttman]

Hi
I have a problem with pupsave
I use 400mhz wyse terminal. I've installed puplite on internal 256mb flash memory and created pupsave on external usb pendrive.
This pendrive has 2 partitions
first is vfat, second one is formatted to ext2

1. when booting from internal 256mb flash, pupsave is not loaded
Why???

Is it kept in a location that matches the paths in your menu.lst?

You may need to check the boot options in your menu.lst, check the paths are correct, also the "pmedia=usb" (or similar) may be required.

What is the file name of the save file? (It should be "pup_save.2fs", or "pup_save.3fs")

Also, how did you install it? The recommended method is the Frugal Intaller, in the menu.

And how did you create the save file? Did you use the PupSaveConfig tool that loads automatically at first shutdown?

2. when booting from usb pendrive, I'm able to load pupsave manually. There is a promt during loading

This 'prompt' makes me think that you maybe have a non-standard name or location for your save file..

But I have problem during installing any pack. There is an error "... not enought room to uncompress...", like posted here
http://www.murga-linux.com/puppy/viewto ... 7f2716da44

do you have any fix for that ?
thanks in advance

I think this is because you do not have enough RAM, or the main SFS is on a partition that is too small...

Try creating a 'swap file' on your USB .... Go to "Menu->System->Swapfile Manager".. This might help, it acts like having more RAM

[AndrewG]

Thank you for quick reply, Scott..

When I install Frugal on internal 256MB it doesn't boot up.
There is just blinking cursor on black screen

This is menu.lst which do not work
title Pup 420 (sda1/lite)
find --set-root --ignore-floppies /lite/initrd.gz
kernel /lite/vmlinuz pmedia=ataflash psubdir=lite pfix=fsck
initrd /lite/initrd.gz

I also tried pmedia=atahd with no success

so, I did
Option2.
I installed through universal installer with the option Internal Flash drive
This is my working extlinux.conf
label puppy
kernel vmlinuz
append initrd=initrd.gz ide=nodma pmedia=ataflash nosmp

With this option, pupsave located on external usb pendrive doesn't work
Also, entire puppy is loading to RAM

Option3.
Boot from USB and use pupsave from the USB, but in this option I got an error during installation "not enough room to unpack.."

I always use the PupSaveConfig tool that loads automatically at first shutdown

What do u mena by this "a non-standard name or location for your save file.."
I use pup save config to create folder and file name with different names to recognize them later on

I have 256MB of RAM and 256MB on internal flash drive

Do you think swap on usb flash will help, coz it can destroy flash drive after some time

[sc0ttman]

Hi AndrewG,

I think a swap file may get around the issue, but yes it will shorten the life of your drive (maybe a lot)..

It seems as though your setup is fine, the boot options look OK...
Not sure what's going on, but after reading the other thread, and having a quick think, it does seem to be a lack of memory...

I would try a re-install with the Frugal Installer, and use a swap file, or go for a full HD install on the internal flash drive (if possible)...

But, as I say, it sounds like a limited memory issue...

And as a note, Puppy (nearly) always loads into RAM, without a save file.... especially frugal installs.

[sc0ttman]

Just a quick note to people with limited memory; Puplite uses a zdrv (a separate sfs file with all the drivers) and I included the "zdrv cutter", as well.

So, if you can boot without a save file, but cannot seem to use one, and you have limited memory, it may help to use the "zdrvcutr" tool to remove all the unneeded drivers from your "zdrv_420.sfs" file.

To do this, you type 'zdrvcutr' in the terminal, then when it finishes, replace your old zdrv with your new one (or rename the old one, so you still have it!)

WARNING: Be sure to have all your extra devices and drives plugged in and loaded, before running zdrvcutr, so you can use these devices with your new, smaller zdrv!

[grimoire]

Hi! scottman, Have you tested some portableapps in puplite 5.0? it seems none of it doesn't work. Do you have any idea how can I make it work?

[sc0ttman]

Hi! scottman, Have you tested some portableapps in puplite 5.0? it seems none of it doesn't work. Do you have any idea how can I make it work?

If you mean the stuff from http://portablelinuxapps.org/, then thhese packages are built for newer systems..

At the very least, you probably need to install the "Puppy 5 compatibility" pet in "Menu->Setup".
I would boot using the "pfix=ram" option, then try it...

(This pet is experimental!)

EDIT : after testing, I have no idea what is going on, especially as I never used the portableapps stuff... They all give info about mounting something in the terminal...

I'm guessing, as all the compatible systems listed are newer than Puppy 4, that they're not supported. But I may be wrong.

EDIT AGAIN:

Rename the downloaded packages, install the "puppy 5 compatibility" thing, restart X, and then try it... I got further after renaming the packages. EXAMPLE: I renamed the deadbeef file to simply 'deadbeef'.

Then I got the "GLIBC_2.7 not found" error, in the terminal, so the puppy 5 compatibility thing may fix it.

[sc0ttman]

Anyone using this, might like to try SJPPLOG, the jQuery PPOG, instead of the standard PPLOG included in Puplite.

SJPPLOG is here: http://murga-linux.com/puppy/viewtopic.php?t=65482

[nancy reagan]

Well atm the moment in your puplite 5, but cannot judge right now for Firedog sfs (wary thing) seems very heavy on my 128mb Toshiba. (Read at Woofy)

Besides did not yet use your zdrive cutter something.

Like all the little utilities, though most of them I don't understand being a low profile user.

Dunno how to handle adblocker etc.

Dunno what the little (tv ?) screen and or the (left right click pointer) on the bottom means ?

Anyway your topic is moved upward again for a sec or so.

[sc0ttman]

Well atm the moment in your puplite 5, but cannot judge right now for Firedog sfs (wary thing) seems very heavy on my 128mb Toshiba.

Go to Menu->Internet->Browser Installer.

You can choose another browser there, if you like. Opera 11 is available, and very fast once it loads up.

For beginners using very slow systems, I recommend FirePup.
If you want to experiment, also try Dillo or lynx, or elinks.

Besides did not yet use your zdrive cutter something.

It may help performance, but may not be suitable for beginners.
( the main problem is remembering to plug in and enable all your USB devices, etc, before running zdrvcutr)

Like all the little utilities, though most of them I don't understand being a low profile user.

Dunno how to handle adblocker etc.

Ad Blocker is easy, I will explain, as blocking ads makes your browsing even faster, as you said it's a bit slow.

So, go to Menu->Internet->Pup-Advert-Blocker. Then tick all 4 of the checkboxes and click 'Start'.
Then wait until a message pops up that says "finished" or "success" or something.

Done.

Dunno what the little (tv ?) screen and or the (left right click pointer) on the bottom means ?

Not sure what you are talking about here.... Sorry

If you mean the two screens shown to the right of the "Apps" button, then these are your desktops.
You have 2 desktops by default.
It is just a simple way of giving you more screen space - letting you use 2 separate desktops...

Anyway your topic is moved upward again for a sec or so.

Yep, good

[sc0ttman]

If you plug in different joypads or drawing tablets, etc, then you will want a script that checks for them and loads their drivers when X starts. I didn't include one by default. So, in case anyone wants it, below is the script to place in /root/Startup.

Code: Select all

#!/bin/sh

# load modules
insmod joydev

# load wacom tablets
depmod
modprobe wacom 

# find joypads
modprobe joydev
modprobe analog

# force feedback
modprobe usbhid
modprobe evdev

#gameport joypads
modprobe ns558

# serial joysticks
modprobe serport
inputattach -xxx /dev/tts/X &


[ -e /dev/js0  ] && echo "Joypad 1 found"
[ -e /dev/js1  ] && echo "Joypad 2 found"

#quit
exit

Just save the code above into a file called 'joystick-daemon' and make it executable.
You can make it executable by right clicking on it in ROX and choosing 'Properties', or by using

Code: Select all

chmod +x /root/Startup/joystick-daemon

in the terminal

Also, if you know of any other commands which should go in this file, please let me know.

[technosaurus]

arch has a pretty good list of small/light apps here:
https://wiki.archlinux.org/index.php/Li ... plications

does X need to be restarted/reconfigured after those kernel modules are loaded? I don't have any to test, just seems likely.[/url]

[sc0ttman]

arch has a pretty good list of small/light apps here:
https://wiki.archlinux.org/index.php/Li ... plications

does X need to be restarted/reconfigured after those kernel modules are loaded? I don't have any to test, just seems likely.[/url]

Thanks technosaurus... I'll have a good look at that..

About the joypad-daemon, usually it's enough to plug in the device before X starts, then the device will work once X loads... If you plug in AFTER X loads up, then yes, you need to restart X.

For example, I often plug in a gamepad before Puppy boots, and it works fine once the desktop loads up.. Then if I switch to a drawing tablet once booted, I restart X and am good to go.

[sc0ttman]

I had a look at the Arch links listed above...
Hmm, I tried to compile: sylpheed (2.6.0 and 3.10), pidgin light 2.5.4, cmus 2.3.4, deadbeef 0.4.4, potamus 0.12...
..all failed...

I need to upgrade (at least) cairo, and thus pixman, gtk, ffmpeg, python...
I was also told by potamus I need gtk+ renamed to gtk2..
I think ffmpeg-2008 and gtk+ 2.12 are definitely showing their age...

But cmus compiled and installed, but doesn't run correctly - no dirs or files are listed when it loads.
I might try going over a few older versions of potamus and pidgin..
But I am no expert at compiling, so it's probably a waste of time!!

[sc0ttman]

If anyone is using this, or Puppy 4, I have compiled and updated a few games, which work really well in Puplite...

Just download the SFS and libs (see below), and install as usual.
(In Puplite you can right click on an SFS file to install it)

Seven Kingdoms: http://www.murga-linux.com/puppy/viewtopic.php?t=66102

FreeCiv 2.2.5: http://www.murga-linux.com/puppy/viewtopic.php?t=66100

Eternal Lands 1.9.1: http://www.murga-linux.com/puppy/viewtopic.php?t=56810

AssaultCube 1.1.0.4: http://www.murga-linux.com/puppy/viewtopic.php?t=56551

[sc0ttman]

Here's a great online deathmatch tank shooter game thing, that works in Puplite...

It's called Zero Ballistics: http://murga-linux.com/puppy/viewtopic.php?t=66387

It needs a good graphics card, so it;s not really for older PCs, but it was just about playable on my 1ghz sempron, nvidia fx5200 agp, with lowered graphics settings.

[sc0ttman]

Also, while I have it in front of me, here is a new Pidgin (Instant Messenger) package, which works in Puplite :

Pidgin 2.7.2: http://puppy.b0x.me/software/packages/i ... 86-410.pet
( get it while you can.. I'll mirror later)

[sc0ttman]

A GREAT fighting game, works well in Puplite: Cartoon Fighter.