Puppy Linux Discussion Forum

rodin.s · Joined: 22 Sep 2010 Posts: 326 Location: Ukraine

One small thing with video_upgrade_wizard. I have two videocards: intel and savage. And the top message of video_upgrade_wizard is not correct.

maddox · Posted: Wed 16 Feb 2011, 20:53 Post subject:

Compaq EN series SFF 350Mhz 256 RAM o/b snd chip ESS1869 full-install snd module es18xx
As I'm away from the computer for about 10 days while visiting family, won't be able to test moving up sleep line.
I was hoping to post output from 'cat /tmp/pup_event_module_devpath_log*' but brought the wrong usb stick with me, sheesh.

Sorry about the confusion, thinking a bit more I should have posted it like this :
My /tmp/pup_event_module_devpath_log files do NOT contain an entry with MODULE=snd_.* (still don't comprehend how/when they are created)
and rc.services has a line that looks for MODULE=snd_.* in those files.
In my case SNDPATTERN turns up empty, thus : goodflag not 1 & file rc_d_rc_services_alsa_ok isn't created.
alsa start) relies on the existence of this file to do it's magic (that's why I split the nested if, not necessary).

As a temporary fix for my full-install, have now done this :
restored 10alsa to original state
added a 'touch /tmp/rc_d_rc_services_alsa_ok' in rc.services (make sure it's created on every boot of full-install)
... everything works as expected, pcm values stay at desired settings.

As for the kill retrovol, during testing I wasn't sure on how retrovol was working backgrounded,daemon & preferred to be sure there was no interference to asound.state on shutdown.
..there is no diff on my side whether killed or not, have removed the line.

James C · Joined: 26 Mar 2009 Posts: 4742 Location: Kentucky

Quick manual frugal install of Wary 504 on my main Linux box.Everything working on initial boot and no real problems yet.
Pretty good on resource usage too.

Terryphi · Posted: Thu 17 Feb 2011, 06:00 Post subject:

So far everything is working as expected for me on a frugal install.

I assume simplified filenames have been dropped. I hope the same applies to the final version. Wink

Kernel 2.6.32.28 is excellent and provides a basis for long term support. If Barry is committed to supporting 2.6.32.xx I think more people will feel inclined to produce browser updates and other pets and sfs for Wary. LTS is the way to go.

I already have a recent nightly build of Chromium 11 running happily on Wary.

Sylvander · Posted: Thu 17 Feb 2011, 07:43 Post subject:

Wary-504-k2.6.32.28.iso
md5sum checked as OK.
Burned the ISO image to CD-RW disk.
Copied the SFS file to sdc3 on Flash Drive [and also copy on internal HDD] to sit beside the Wary-500 pupsave file[s].
Booted the Wary-504 CD-RW disk.
2 Wary-500 pupsave files found; 1 on HDD, 1 on Flash Drive.
Used the pupsave on the Flash Drive.
Wary-504 updated the Wary-500 pupsave OK.

At desktop, the Puppy wasn't connected to the web.
Started the Puppy firewall.
Ran the classic "Internet Connection Wizard".
No network card seen.
i.e. eth0 not seen.
Unable to find a driver for NIC.
Unable to connect.

Wary-500 connects OK.
Just now finished copying the pupsave for Wary-500 from the internal HDD to the Flash Drive.
Will try that pupsave to see if any problems. [I'm back: No problems, working fine]

Hardware = circa 2003
Mobo = ASUS A7A266
Ethernet Controller = National Semiconductor Corporation DP83815

Sage · Joined: 04 Oct 2005 Posts: 4623 Location: GB

I reported the missing cursor inside the PPM when a message panel overlay is present. This is still a problem.
Otherwise everything seems to work, DHCP is on at boot, sound OK, etc.

Midori? Still an obvious choice for a compact distro. Has the advantage of no Java & Flash on default, so fast - ideal as the kick-off browser. Check it out in Fluppy. [Jemimah seems to have flash functioning, though.]

01micko · Joined: 11 Oct 2008 Posts: 7019 Location: qld

Ok.. on the old p3 copppermine 600, 128 RAM, acx wireless.

504 booted nicely, got my SB16 going ok then connected my acx TI card.. wouldn't work directly with sns/ndiswrapper so I tried Dougal's and still no go. Had to unload and then try sns again and then got online.

After a reboot the configuration didn't stick. had to jump through exactly the same hoops.

The following is the tail -n10 of dmesg:

2byte · Joined: 09 Oct 2006 Posts: 356

Jim1911 · Joined: 19 May 2008 Posts: 2353 Location: Texas, USA

Wary-5.0.4 updated save file fine from Wary-5.0.3. Everything appears to be working fine including all of the following except Bibletime:

Running bibletime in a console flashes the opening screen, then closes with this message, I did use ppm to reinstall dbus, however there is no change in the error message. Ideas?

zigbert · Joined: 29 Mar 2006 Posts: 5245 Location: Valåmoen, Norway

I have been looking at pctorrent. I started a rewrite to get a more up-to-date gui. But I couldn't get pctorrent to download anything. The gui seems to work ok, - it's ctorrent that fails for me. I tried both the ctorrent-command built by pctorrent and the example command from ctorrent -h

don570 · Joined: 10 Mar 2010 Posts: 2473 Location: Ontario

It makes sense to localize the screen capture program in Puppy,
so I did this using Zigbert's method.

I renamed mtpaintsnapshot to psnapshot and made a pet package.
psnapshot-1.3.pet

and here's the French,German and Spanish locals
psnapshot-NLS-1.3.pet

_____________________________________________________

Billtoo · Joined: 07 Apr 2009 Posts: 1497 Location: Ontario Canada

I'm running 504 live with a save file.
Wired network and sound were good at 1st bootup.
I've installed kernel_src-2.6.32.28-patched.sfs + wary_devx_504.sfs +
NVIDIA-Linux-x86-260.19.36.run

# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
46517 frames in 5.0 seconds = 9303.235 FPS
51828 frames in 5.0 seconds = 10365.434 FPS
51858 frames in 5.0 seconds = 10371.523 FPS
# report-video
VIDEO REPORT: Wary Puppy, version 504

Chip description:
oem: NVIDIA
product: G84 Board - p402h00 Chip Rev

Driver used by Xorg:
#card0driver

Video mode used by Xorg:
Resolution: Depth 24 Depth: "Display"

...the above also recorded in /tmp/report-video
#
OpenGL
Vendor NVIDIA Corporation
Renderer GeForce 8600 GT/PCI/SSE2
Version 3.3.0 NVIDIA 260.19.36
Direct Rendering Yes

504 is working well on this pc.

James C · Joined: 26 Mar 2009 Posts: 4742 Location: Kentucky

Did an upgrade of the frugal install on my old P3 test box from Wary 503 to 504. No problems.Everything is working as it should be. Smile

Sylvander · Posted: Fri 18 Feb 2011, 04:37 Post subject:

Wary-504-k2.6.32.28.iso

As suggested in a PPM, I installed dhcpcd-5.2.11-w-20110214.pet but it made no improvement; still cannot connect to the web. Sad

abushcrafter · Joined: 30 Oct 2009 Posts: 1447 Location: England

How stable is the in-development version of The Gimp in the repo?