Fluppy 013

For talk and support relating specifically to Puppy derivatives
Message
Author
User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

#381 Post by rjbrewer »

Sully;

My neighbor has a Lenovo s10e with bcm4312.
He runs Mac Snow Leopard on it.
JRBs' bcm4312v3 gives the option to use "wl" and it works fine on that machine.
When I tried Fluppy yesterday it wouldn't see any wireless
devices; and we had to reset Airport from the bios to get Leopard
to connect again.

It's all quite confusing. :)
Last edited by rjbrewer on Fri 10 Sep 2010, 17:25, edited 1 time in total.

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs

Brown Mouse
Posts: 564
Joined: Tue 09 Jun 2009, 21:06

#382 Post by Brown Mouse »

Stripe wrote:Hi all

Trying to configure vlc for Fluppy, no matter which version of the source code I try when I try to "make" it says that there are missing /vlc/ files (have the devx and kernel sfs installed) and have downloaded the full source code.

Could a pet from another puppy be returned to source and compiled from there? (as I want it to be compiled for Fluppy005 and not something else)

Any other ideas??

Stripe
Hi there Stripe

I managed to get 'vlc-0.8.6h-engv5-1.pet' working fine.
However it is dated.
Sorry I don't have a link for it.

Stripe
Posts: 658
Joined: Wed 23 Jun 2010, 05:18
Location: In a field. England

#383 Post by Stripe »

jemimah wrote:I was able to get the latest vlc to compile. I'll post an sfs when it's done processing.
Thank you very much Jemimah

Were you just using
# ./configure
# make
# new2dir make install
Or was I missing a suffix? (--???)
as configure would complete but an error was always returned on make.

Sorry but I am just trying to learn how to do things properly
Thanks again
Stripe

User avatar
jemimah
Posts: 4307
Joined: Wed 26 Aug 2009, 19:56
Location: Tampa, FL
Contact:

#384 Post by jemimah »

VLC is a difficult one to compile. It's quicker for me to just do it than to document how I did it. :( Plus I found some problems with the devX now that I need to fix for the next version.

It seems I've only got it working without the GUI. I have to build the latest Qt for that - so it could be a day or two actually.

User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

#385 Post by rjbrewer »

Brown Mouse wrote:
Stripe wrote:Hi all

Trying to configure vlc for Fluppy, no matter which version of the source code I try when I try to "make" it says that there are missing /vlc/ files (have the devx and kernel sfs installed) and have downloaded the full source code.

Could a pet from another puppy be returned to source and compiled from there? (as I want it to be compiled for Fluppy005 and not something else)

Any other ideas??

Stripe
Hi there Stripe

I managed to get 'vlc-0.8.6h-engv5-1.pet' working fine.
However it is dated.
Sorry I don't have a link for it.
Yes that vlc lite is a little dated, but it's only 1/3 the size of the
version in Lucids' Quickpet.
Works fine for me in Fluppy or any 4.xx Puppy.

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs

Stripe
Posts: 658
Joined: Wed 23 Jun 2010, 05:18
Location: In a field. England

#386 Post by Stripe »

jemimah wrote:VLC is a difficult one to compile. It's quicker for me to just do it than to document how I did it. :( Plus I found some problems with the devX now that I need to fix for the next version.

It seems I've only got it working without the GUI. I have to build the latest Qt for that - so it could be a day or two actually.
There is no rush, its just a great media player for low spec machines, (my 800mhz 256mb test/spare box runs great with it)
Thanks again
Stripe

User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

#387 Post by rjbrewer »

To further add to (or possibly explain?) the bcm 4312 problem I was
having.

The usbflash install I did was with "bootflash"; using either the cd or
the iso as source.
I've found that the flash install gives a "no wireless" warning on other
computers, in addition to the Lenovo with bcm4312.
It also fails to install any sound apps., alsa, retrovol......

I used "universal installer" for the flash install and everything seems
to be fine.
Wonder if I can talk my friend with the Lenovo into another
attempt. :lol: :lol:

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs

pupluser
Posts: 26
Joined: Sat 14 Aug 2010, 22:04

non fixed sound bug

#388 Post by pupluser »

i have tried the new fluppy 005 and you still didnt fix the sound bug that hapens in full installation that sound wont work in chrome or any other app it only works in gnome-mplayer

User avatar
maxpro4u
Posts: 293
Joined: Sat 19 Jun 2010, 18:20
Location: Rittman,Ohio,USA, In dog years,I'm dead
Contact:

#389 Post by maxpro4u »

Stripe wrote:Hi Maxpro4u

Try running in terminal:
"less /proc/asound/modules" (without the "")
This will list the available sound devices

Please let me know what it says

It might be recognising something else as a sound device

Let me know how you get on

Cheers
Stripe
I did the above and there were no entries at all.
Dell D610 1.7M w/1024mb
Testing Slacko and a few others
I'm Max Wachtel and I approve this message.
Registered Linux User #393236

User avatar
jemimah
Posts: 4307
Joined: Wed 26 Aug 2009, 19:56
Location: Tampa, FL
Contact:

#390 Post by jemimah »

Maxpro4u are you running Fluppy on the 233MHz P2 in your sig?

It would totally not surprise me if the 2.6.33 kernel is too new for that machine.

User avatar
maxpro4u
Posts: 293
Joined: Sat 19 Jun 2010, 18:20
Location: Rittman,Ohio,USA, In dog years,I'm dead
Contact:

#391 Post by maxpro4u »

jemimah wrote:Maxpro4u are you running Fluppy on the 233MHz P2 in your sig?

It would totally not surprise me if the 2.6.33 kernel is too new for that machine.
why yes, yes I am. 5.1.1 seems to run fine(which I am using at the moment). I have been trying different puppies for a while now to see which one runs the best.
Dell D610 1.7M w/1024mb
Testing Slacko and a few others
I'm Max Wachtel and I approve this message.
Registered Linux User #393236

GaRailroader
Posts: 33
Joined: Thu 17 Jun 2010, 01:14
Location: Atlanta, GA

Lenovo S10e

#392 Post by GaRailroader »

Jemimah/rjb:

I think we have a winner. I'd been making Fluppy 5 on USB using the bootflash technique. I took RJB's advice and did with Universal Installer and it recognized my wireless card right out of the box. I've not yet linked it to my network but I suspect I am golden. I've got to run now but thank you both very very much for all the help. I've got to travel for the next 4 weeks so having Fluppy on the Lenovo is going to be a real plus.

Patrick J

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#393 Post by edoc »

Will a "vfat" formatted 2g USB stick work to get Fluppy loaded Frugal on my Netbook, please?
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
jemimah
Posts: 4307
Joined: Wed 26 Aug 2009, 19:56
Location: Tampa, FL
Contact:

#394 Post by jemimah »

Yes it will.

There is detailed documentation here (applies to both fluppy and puppeee): http://puppeee.com/web/download/

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#395 Post by edoc »

EDIT: I was just on that install info site, thanks!

I have Puppy Lucid 5.1 (003) on this laptop.

Can I just use MENU - SETUP - BootFlash install Puppy to USB?

Then boot that USB on my Samsung NB30 and install it as Frugal?
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
jemimah
Posts: 4307
Joined: Wed 26 Aug 2009, 19:56
Location: Tampa, FL
Contact:

#396 Post by jemimah »

edoc wrote:EDIT: I was just on that install info site, thanks!

I have Puppy Lucid 5.1 (003) on this laptop.

Can I just use MENU - SETUP - BootFlash install Puppy to USB?

Then boot that USB on my Samsung NB30 and install it as Frugal?
Yes - bootflash should work fine - just make sure the zdrv (zp005332.sfs) gets copied to the usb stick.

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#397 Post by edoc »

jemimah wrote: Yes - bootflash should work fine - just make sure the zdrv (zp005332.sfs) gets copied to the usb stick.
It appears to have worked fine.

The zdrv was not copied but clicking on the Fluppy-005.iso to mount it allowed me to copy it over.

Do I really need the Fluppy devx right away, e.g. does it contain important drivers and apps, or may I add that later?
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

Roy
Posts: 451
Joined: Wed 31 Dec 2008, 18:31

#398 Post by Roy »

Jemimah,

Thanks for the grisbi pet but I'm having some difficulties on my end... Same netbook, same LiveCD, same external drive, etc... but I am only catching a short glimpse of the available wireless networks now (on first pfix=ram boot). Even though I am typing in the WPA/TKIP password correctly, pwireless comes back with a message that the password is wrong. Then ALL of the wireless access points simply disappear.

I tried creating a save file, blacklisting ssb and b43 (loading wl), saving and rebooting -- but to no avail. In short, I'm stuck at the moment.

The thing I really wanted to check on the grisbi program was whether or not it would easily import data from one's bank. The young adults I've met who are challenged by personal budgeting usually (but not always) lack the discipline it takes to manually input large pools of data. (Others suffer from previous mis-informed decisions or have been simply overcome with life events.) Anyway, I believe an easy import function would keep a lot of these folks from falling off the wagon, to use a figure of speech.

[EDIT: It does import data! Or rather it loads a CSV file that has been exported from the bank.}

One criticism I did read on the web was that "grisbi" does not by itself identify the program as anything to do with finance or budgeting -- and I think that criticism has some merit. I am about to download your .pet for transfer via a thumbdrive, but I hope it creates a menu entry that identifies it as a finance function.

[EDIT: I see that you did create a Business menu of "Personal Finance Manager". Thanks!]

As far as including it in the base .iso, that's entirely your call (and I really do understand size constraints). In my mind, an easily accessible .pet should be good enough.

-Roy

FINAL EDIT: I do see one problem with this program, after loading an exported CSV file, the program tells me "The following fields are missing or inconsistent: Payee, transaction amount" and I don't see any way to create that field or go forward from there. I can go back to the website for documentation, but if it's not obvious or intuitive.... is it really going to meet the need?
Last edited by Roy on Sat 11 Sep 2010, 04:00, edited 1 time in total.

User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

Re: Lenovo S10e

#399 Post by rjbrewer »

GaRailroader wrote:Jemimah/rjb:

I think we have a winner. I'd been making Fluppy 5 on USB using the bootflash technique. I took RJB's advice and did with Universal Installer and it recognized my wireless card right out of the box. I've not yet linked it to my network but I suspect I am golden. I've got to run now but thank you both very very much for all the help. I've got to travel for the next 4 weeks so having Fluppy on the Lenovo is going to be a real plus.

Patrick J
Hot Diggitty Dog!!!
Let us know if and how the connection is working when you get a chance. :)

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#400 Post by edoc »

It worked!

WPA worked to connect to my Netgear as well.

Question: Can I replace Google Chrome with Seamonkey?

I strongly dislike Google and am used to Seamonkey.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

Post Reply