Failed to load dri module

Booting, installing, newbie
Post Reply
Message
Author
PaulK
Posts: 7
Joined: Thu 30 Jul 2009, 15:09

Failed to load dri module

#1 Post by PaulK »

I apologize for my bad english.
I try to install ToutouLinux (v 4.1.2Retro) on an old PC (vendor IBM - graphic card Sis). With the live CD Xserver can'nt start. In the "Xorg.0.log" I have an error message :
  • (II) SIS(0): 2D acceleration enabled
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (WW) Warning, couldn't open module dri
    (II) UnloadModule: "dri"
    (EE) SIS: Failed to load module "dri" (module does not exist, 0)
    (EE) SIS(0): **************************************************
    (EE) SIS(0): ERROR:
    (EE) SIS(0): Failed to load dri module
    (EE) SIS(0): END OF MESSAGE
What have I to do ?
Many thanks for you help.

The complete Xorg.0.log is below.
  • _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
    _XSERVTransOpen: transport open failed for inet6/puppypc:0
    _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

    X Window System Version 1.3.0
    Release Date: 19 April 2007
    X Protocol Version 11, Revision 0, Release 1.3
    Build Operating System: UNKNOWN
    Current Operating System: Linux puppypc 2.6.21.7 #1 Sat Aug 30 18:33:20 GMT-8 2008 i686
    Build Date: 28 November 2007
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 30 11:02:22 2009
    (++) Using config file: "/tmp/xorg.conf.new"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (WW) The directory "/usr/X11R7/lib/X11/fonts/OTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/X11R7/lib/X11/fonts/100dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/X11R7/lib/X11/fonts/75dpi/" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/X11R7/lib/X11/fonts/misc/,
    /usr/X11R7/lib/X11/fonts/TTF/,
    /usr/X11R7/lib/X11/fonts/Type1/
    (**) RgbPath set to "/usr/X11R7/share/X11/rgb"
    (**) ModulePath set to "/usr/X11R7/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81d4520
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.2
    X.Org XInput driver : 0.7
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R7/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
    (--) using VT number 3

    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 10 class 06,00,00 hdr 80
    (II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
    (II) PCI: 00:01:0: chip 1039,0018 card 0000,0000 rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:01:1: chip 1039,0900 card 1014,01b2 rev 80 class 02,00,00 hdr 00
    (II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
    (II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
    (II) PCI: 00:01:4: chip 1039,7018 card 1014,01b6 rev 01 class 04,01,00 hdr 00
    (II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 01:00:0: chip 1039,6300 card 1014,01b3 rev 10 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xefc00000 - 0xefcfffff (0x100000) MX
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xdfa00000 - 0xefafffff (0x10100000) MX
    (--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter rev 16, Mem @ 0xe0000000/27, 0xefce0000/17, I/O @ 0xbc80/7
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
    (II) Active PCI resource ranges:
    [0] -1 0 0xffde0000 - 0xffde0fff (0x1000) MX[B]
    [1] -1 0 0xffdf0000 - 0xffdf0fff (0x1000) MX[B]
    [2] -1 0 0xffdd0000 - 0xffdd0fff (0x1000) MX[B]
    [3] -1 0 0xffdc0000 - 0xffdc0fff (0x1000) MX[B]
    [4] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
    [5] -1 0 0xefce0000 - 0xefcfffff (0x20000) MX[B](B)
    [6] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
    [7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [8] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [9] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [10] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
    [11] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
    [12] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
    [13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [14] -1 0 0x0000bc80 - 0x0000bcff (0x80) IX[B](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xffde0000 - 0xffde0fff (0x1000) MX[B]
    [1] -1 0 0xffdf0000 - 0xffdf0fff (0x1000) MX[B]
    [2] -1 0 0xffdd0000 - 0xffdd0fff (0x1000) MX[B]
    [3] -1 0 0xffdc0000 - 0xffdc0fff (0x1000) MX[B]
    [4] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
    [5] -1 0 0xefce0000 - 0xefcfffff (0x20000) MX[B](B)
    [6] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
    [7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [8] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [9] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [10] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
    [11] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
    [12] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
    [13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [14] -1 0 0x0000bc80 - 0x0000bcff (0x80) IX[B](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xffde0000 - 0xffde0fff (0x1000) MX[B]
    [5] -1 0 0xffdf0000 - 0xffdf0fff (0x1000) MX[B]
    [6] -1 0 0xffdd0000 - 0xffdd0fff (0x1000) MX[B]
    [7] -1 0 0xffdc0000 - 0xffdc0fff (0x1000) MX[B]
    [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
    [9] -1 0 0xefce0000 - 0xefcfffff (0x20000) MX[B](B)
    [10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
    [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [13] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [14] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [16] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
    [17] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
    [18] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
    [19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [20] -1 0 0x0000bc80 - 0x0000bcff (0x80) IX[B](B)
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R7/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R7/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "xtrap"
    (II) Loading /usr/X11R7/lib/xorg/modules/extensions//libxtrap.so
    (II) Module xtrap: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DEC-XTRAP
    (II) LoadModule: "freetype"
    (II) Loading /usr/X11R7/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.3.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R7/lib/xorg/modules/fonts//libtype1.so
    (II) Module type1: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Type1
    (II) LoadModule: "sis"
    (II) Loading /usr/X11R7/lib/xorg/modules/drivers//sis_drv.so
    (II) Module sis: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 0.7.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 1.2
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R7/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
    (II) LoadModule: "kbd"
    (II) Loading /usr/X11R7/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
    (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
    SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
    SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
    SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
    SIS340
    (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
    Volari V3XT/V5/V8/Duo (XG40)
    (II) Primary Device is: PCI 01:00:0
    (--) Chipset SIS630/730 found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xffde0000 - 0xffde0fff (0x1000) MX[B]
    [5] -1 0 0xffdf0000 - 0xffdf0fff (0x1000) MX[B]
    [6] -1 0 0xffdd0000 - 0xffdd0fff (0x1000) MX[B]
    [7] -1 0 0xffdc0000 - 0xffdc0fff (0x1000) MX[B]
    [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
    [9] -1 0 0xefce0000 - 0xefcfffff (0x20000) MX[B](B)
    [10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
    [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [13] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [14] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [16] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
    [17] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
    [18] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
    [19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [20] -1 0 0x0000bc80 - 0x0000bcff (0x80) IX[B](B)
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xffde0000 - 0xffde0fff (0x1000) MX[B]
    [5] -1 0 0xffdf0000 - 0xffdf0fff (0x1000) MX[B]
    [6] -1 0 0xffdd0000 - 0xffdd0fff (0x1000) MX[B]
    [7] -1 0 0xffdc0000 - 0xffdc0fff (0x1000) MX[B]
    [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
    [9] -1 0 0xefce0000 - 0xefcfffff (0x20000) MX[B](B)
    [10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
    [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
    [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
    [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [19] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
    [20] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
    [21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
    [22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [23] -1 0 0x0000bc80 - 0x0000bcff (0x80) IX[B](B)
    [24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
    [25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.3.0.0)
    (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
    (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
    (II) SIS(0): *** for documentation and updates.
    (--) SIS(0): sisfb not found
    (--) SIS(0): Relocated I/O registers at 0xBC80
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module already built-in
    (==) SIS(0): Depth 24, (==) framebuffer bpp 32
    (==) SIS(0): RGB weight 888
    (==) SIS(0): Default visual is TrueColor
    (--) SIS(0): Video BIOS version "1.01g " found (old SiS data layout)
    (==) SIS(0): Using XAA acceleration architecture
    (==) SIS(0): Using HW cursor
    (==) SIS(0): Color HW cursor is disabled
    (==) SIS(0): TurboQueue enabled
    (==) SIS(0): Hotkey display switching is disabled
    (II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
    (II) SIS(0): whether enabled or disabled. This is no driver bug.
    (==) SIS(0): SiSCtrl utility interface is disabled
    (II) SIS(0): For information on SiSCtrl, see
    http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
    (==) SIS(0): DRI enabled
    (II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
    (II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
    (--) SIS(0): Shared Memory Area is on DIMM0
    (--) SIS(0): DRAM type: SDR SDRAM
    (--) SIS(0): Memory clock: 133.634 MHz
    (--) SIS(0): (Adapter assumes MCLK being 133 Mhz)
    (--) SIS(0): DRAM bus width: 64 bit
    (--) SIS(0): Linear framebuffer at 0xE0000000
    (--) SIS(0): MMIO registers at 0xEFCE0000 (size 64K)
    (--) SIS(0): VideoRAM: 16384 KB
    (II) SIS(0): Using 8192K of framebuffer memory at offset 0K
    (--) SIS(0): Hardware supports two video overlays
    (--) SIS(0): Detected SiS301 video bridge (Charter/UMC-1, ID 1; Rev 0x0)
    (--) SIS(0): No CRT1/VGA detected
    (--) SIS(0): Detected LCD/plasma panel (1024x768, 3, non-exp., RGB24 [3204ff])
    (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) SIS(0): CRT1 gamma correction is enabled
    (II) SIS(0): CRT2 gamma correction is enabled
    (--) SIS(0): Memory bandwidth at 32 bpp is 267.268 MHz
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"(II) Module already built-in
    (--) SIS(0): CRT2 DDC probing failed
    (==) SIS(0): Min pixel clock is 10 MHz
    (--) SIS(0): Max pixel clock is 185 MHz
    (II) SIS(0): Replaced entire mode list with built-in modes
    (II) SIS(0): Correcting missing CRT2 monitor HSync range
    (II) SIS(0): Correcting missing CRT2 monitor VRefresh range
    (II) SIS(0): "Unknown reason" in the following list means that the mode
    (II) SIS(0): is not supported on the chipset/bridge/current output device.
    (II) SIS(0): Monitor0: Using hsync range of 30.00-80.00 kHz
    (II) SIS(0): Monitor0: Using vrefresh range of 59.00-61.00 Hz
    (II) SIS(0): Monitor0: Using vrefresh value of 71.00 Hz
    (WW) SIS(0): Unable to estimate virtual size
    (II) SIS(0): Clock range: 10.00 to 185.45 MHz
    (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    (II) SIS(0): Not using default mode "800x600" (hsync out of range)
    (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
    (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
    (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
    (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
    (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
    (II) SIS(0): Not using default mode "640x480" (hsync out of range)
    (II) SIS(0): Not using default mode "640x480" (hsync out of range)
    (II) SIS(0): Not using default mode "720x480" (unknown reason)
    (II) SIS(0): Not using default mode "720x576" (unknown reason)
    (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
    (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
    (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
    (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
    (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
    (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
    (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
    (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
    (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
    (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
    (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
    (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
    (II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    (II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    (II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    (II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
    (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
    (II) SIS(0): Not using default mode "1280x960" (unknown reason)
    (II) SIS(0): Not using default mode "1280x960" (unknown reason)
    (II) SIS(0): Not using default mode "1024x600" (unknown reason)
    (II) SIS(0): Not using default mode "1152x768" (unknown reason)
    (II) SIS(0): Not using default mode "800x480" (unknown reason)
    (II) SIS(0): Not using default mode "800x480" (unknown reason)
    (II) SIS(0): Not using default mode "800x480" (unknown reason)
    (II) SIS(0): Not using default mode "1024x576" (unknown reason)
    (II) SIS(0): Not using default mode "1024x576" (unknown reason)
    (II) SIS(0): Not using default mode "1024x576" (unknown reason)
    (II) SIS(0): Not using default mode "1280x720" (unknown reason)
    (II) SIS(0): Not using default mode "1280x720" (unknown reason)
    (II) SIS(0): Not using default mode "1280x720" (unknown reason)
    (II) SIS(0): Not using default mode "1152x864" (unknown reason)
    (II) SIS(0): Not using default mode "1152x864" (unknown reason)
    (II) SIS(0): Not using default mode "1152x864" (unknown reason)
    (II) SIS(0): Not using default mode "848x480" (unknown reason)
    (II) SIS(0): Not using default mode "848x480" (unknown reason)
    (II) SIS(0): Not using default mode "856x480" (unknown reason)
    (II) SIS(0): Not using default mode "856x480" (unknown reason)
    (II) SIS(0): Not using default mode "1360x768" (unknown reason)
    (II) SIS(0): Not using default mode "1280x768" (unknown reason)
    (II) SIS(0): Not using default mode "768x576" (unknown reason)
    (II) SIS(0): Not using default mode "1360x1024" (unknown reason)
    (--) SIS(0): Virtual size is 1024x768 (pitch 1024)
    (**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
    (**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
    (**) SIS(0): *Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz)
    (**) SIS(0): *Default mode "640x400" (640x400) (For CRT device: 25.1 MHz, 31.6 kHz, 71.6 Hz)
    (**) SIS(0): *Default mode "512x384" (512x384) (For CRT device: 32.6 MHz, 48.5 kHz, 60.1 Hz (D))
    (**) SIS(0): *Default mode "400x300" (400x300) (For CRT device: 20.0 MHz, 37.9 kHz, 60.3 Hz (D))
    (**) SIS(0): *Default mode "320x240" (320x240) (For CRT device: 12.5 MHz, 31.3 kHz, 60.7 Hz (D))
    (**) SIS(0): *Default mode "320x200" (320x200) (For CRT device: 12.5 MHz, 31.3 kHz, 70.9 Hz (D))
    (==) SIS(0): DPI set to (75, 75)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/X11R7/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/X11R7/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.2.0
    ABI class: X.Org Video Driver, version 1.2
    (II) SIS(0): 2D acceleration enabled
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (WW) Warning, couldn't open module dri
    (II) UnloadModule: "dri"
    (EE) SIS: Failed to load module "dri" (module does not exist, 0)
    (EE) SIS(0): **************************************************
    (EE) SIS(0): ERROR:
    (EE) SIS(0): Failed to load dri module
    (EE) SIS(0): END OF MESSAGE
    (EE) SIS(0): **************************************************
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xefce0000 - 0xefcfffff (0x20000) MX[B]
    [1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
    [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [6] -1 0 0xffde0000 - 0xffde0fff (0x1000) MX[B]
    [7] -1 0 0xffdf0000 - 0xffdf0fff (0x1000) MX[B]
    [8] -1 0 0xffdd0000 - 0xffdd0fff (0x1000) MX[B]
    [9] -1 0 0xffdc0000 - 0xffdc0fff (0x1000) MX[B]
    [10] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
    [11] -1 0 0xefce0000 - 0xefcfffff (0x20000) MX[B](B)
    [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
    [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
    [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
    [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
    [16] 0 0 0x0000bc80 - 0x0000bcff (0x80) IX[B]
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [21] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [22] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
    [23] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
    [24] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
    [25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [26] -1 0 0x0000bc80 - 0x0000bcff (0x80) IX[B](B)
    [27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/X11R7/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 1.2
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/X11R7/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
    (II) SIS(0): initializing int10
    (II) SIS(0): Primary V_BIOS segment is: 0xc000
    (II) SIS(0): VESA BIOS detected
    (II) SIS(0): VESA VBE Version 3.0
    (II) SIS(0): VESA VBE Total Mem: 16384 kB
    (II) SIS(0): VESA VBE OEM: SiS
    (II) SIS(0): VESA VBE OEM Software Rev: 1.0
    (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
    (II) SIS(0): VESA VBE OEM Product: 630
    (II) SIS(0): VESA VBE OEM Product Rev: 1.01g
    (==) SIS(0): Write-combining range (0xe0000000,0x1000000)
    (II) SIS(0): Setting standard mode 0x64
    (II) SIS(0): Framebuffer from (0,0) to (1023,2045)
    (II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Dashed Lines
    Offscreen Pixmaps
    Setting up tile and stipple cache:
    32 128x128 slots
    10 256x256 slots
    (--) SIS(0): CPU frequency 797.50Mhz
    (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
    (--) SIS(0): Checked libc memcpy()... 148.5 MiB/s
    (--) SIS(0): Checked built-in-1 memcpy()... 141.3 MiB/s
    (--) SIS(0): Checked built-in-2 memcpy()... 64.5 MiB/s
    (--) SIS(0): Checked MMX memcpy()... 169.6 MiB/s
    (--) SIS(0): Checked MMX2 memcpy()... 256.6 MiB/s
    (--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
    (--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
    (==) SIS(0): Backing store disabled
    (==) SIS(0): Silken mouse enabled
    (II) SIS(0): Using SiS300/315/330/340 series HW Xv
    (II) SIS(0): Direct rendering disabled
    (II) SIS(0): Initialized SISCTRL extension version 0.1
    (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (**) Option "Protocol" "auto"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: Core Pointer
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (**) Option "CoreKeyboard"
    (**) Keyboard0: Core Keyboard
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
    (--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (II) Mouse autoprobe: Disabling secondary wheel
    (II) SIS(0): Restoring by setting old mode 0x03
    FreeFontPath: FPE "/usr/X11R7/lib/X11/fonts/misc/" refcount is 2, should be 1; fixing.
Top
PaulK
Posts: 7
Joined: Thu 30 Jul 2009, 15:09

http://www.murga-linux.com/puppy/viewtopic.php?p=328168#3281

#2 Post by PaulK »

I tried to view the reply to the topic
"http://www.murga-linux.com/puppy/viewtopic.php?t=45083" by using the link
referenced below ("http://www.murga-linux.com/puppy/viewto ... 168#328168").
I had only the message : "The topic or post you requested does not exist. Click
here to return to the index".
So I can't view the reply made !
Thanks for your help.
Top
muggins
Posts: 6724
Joined: Fri 20 Jan 2006, 10:44
Location: hobart

#3 Post by muggins »

Have you installed xorg_xorg_full_dri-7.3.pet?
Top
User avatar
Patriot
Posts: 733
Joined: Thu 15 Jan 2009, 19:04

#4 Post by Patriot »

Hmmm .....

Yes, muggins is right ... You'll need the full xorg driver pet. Be warned, it's huge ..... needs about 100MB free space before installing, 54MB will be used up after installation.

Your xorg logs indicate sis630 which supports dri but don't expect blazing 3d with it.

Rgds
Top
Kal
Posts: 626
Joined: Thu 05 May 2005, 16:59
Location: California, High Desert

#5 Post by Kal »

I normally just put in xorg_xorg_dri-7.3-1.pet from ftp://ibiblio.org/pub/linux/distributio ... ackages-4/, I have had trouble with the full at times and it's smaller.

Kal
Top
PaulK
Posts: 7
Joined: Thu 30 Jul 2009, 15:09

#6 Post by PaulK »

Kal, Patriot, muggins,
Many thanks for help.
I downloaded puppylinux/pet_packages-4/xorg_xorg_dri-7.3-1.pet. But I don't know how to do : I work with the mode live CD, and the RAM is only 110 M. I never installed with ".pet" files (usually under Ubuntu it is ".deb" files). The Xserver does not work, and I don't know install with the command line !
Could you help me. I apologize for my bad english.
Top
muggins
Posts: 6724
Joined: Fri 20 Jan 2006, 10:44
Location: hobart

#7 Post by muggins »

Do you have a pup_save.2fs file? If yes, then just click, the downloaded .pet, to install it. Otherwise, if your running entirely from CD/DVD, then, unless you're running puppy multisession on the CD/DVD, the xorg .pet won't be saved anywhere.
Top
PaulK
Posts: 7
Joined: Thu 30 Jul 2009, 15:09

#8 Post by PaulK »

Thanks muggins,
I just used pup_save.2fs file yesterday for the first time, on a flash drive. But when I rebooted it didn't work correctly. I will try again the next time.
How do I do with the line command to install a ".pet", because I have no Xserver, no mouse and I cannot click !!!!!
Thank tou very much.
Top
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#9 Post by Béèm »

Maybe you could try xvesa first.
On the x prompt type xorgwizard and select xvesa.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Top
PaulK
Posts: 7
Joined: Thu 30 Jul 2009, 15:09

#10 Post by PaulK »

Hello Béèm,
I tried xvesa : in a few seconds it goes out and does'nt work.
I tried also to put 'sis_dri.so' of Thomas Winischlofer in my /usr/lib/xorg/modules/extensions whithout success...
I have to find and appropriate dri module, or install xorg_xorg_dri-7.3-1.pet,....but i don't know to make this install only whith the command. line.
Many thanks for your help.
Top
User avatar
Patriot
Posts: 733
Joined: Thu 15 Jan 2009, 19:04

#11 Post by Patriot »

Hmmm .....

Someone asks me to have a look at their machine just now. It has sis630 on it ... I'll give it a puppy test run and see how it goes ...

Rgds
Top
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#12 Post by Béèm »

PaulK wrote:Hello Béèm,
I tried xvesa : in a few seconds it goes out and does'nt work.
I tried also to put 'sis_dri.so' of Thomas Winischlofer in my /usr/lib/xorg/modules/extensions whithout success...
I have to find and appropriate dri module, or install xorg_xorg_dri-7.3-1.pet,....but i don't know to make this install only whith the command. line.
Many thanks for your help.
Sorry to hear about this.
I remember there have been discussions about installing a pet from the command line.
Maybe via the puppysearch in my sig and with a search on 'installing pet with cli' or 'installing pet from command line/prompt' you might find interesting information.

Good luck
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Top
PaulK
Posts: 7
Joined: Thu 30 Jul 2009, 15:09

#13 Post by PaulK »

Thanks Béèm for your idea.
I think the command is 'petget'

Code: Select all

# absolute path, ex: petget /root/xbubble-0.2.4.pet
# petget script will simply install it.
.
But I can't get help
petget -help
gave me : "/usr/sbin/petget : erreur d'entrée/sortie"
And the command didn't work for install xorg_xorg_dri-7.3-1.pet :(
Because I can't open a file ".pet", I am searching for the package xorg_xorg-7.3-1 in "tar.gz" to open it and search if I can use it ?

Thanks for your help.
Top
PaulK
Posts: 7
Joined: Thu 30 Jul 2009, 15:09

#14 Post by PaulK »

Hé Béèm and others,
I have downloaded the last version of puppy (4.2.1 - kernel 2.6.25 ) and it works well. :D
But i couldn't find why this one works and not Toutou-4.1.2Retro :?:
Thank for you helping me.
Top
User avatar
mikeb
Posts: 11297
Joined: Thu 23 Nov 2006, 13:56

#15 Post by mikeb »

I have downloaded the last version of puppy (4.2.1 - kernel 2.6.25 ) and it works well. Very Happy
But i couldn't find why this one works and not Toutou-4.1.2Retro Question
Thank for you helping me.
beacause there was an X server problem...could have been an blocking it from starting up or a bug in Toutou. Dri is not needed..the video driver was loading correctly. This is why xvesa did not work either.
Glad you found your own answer :)
mike
Top
Post Reply

Return to “Beginners Help ( Start Here)”