HPIJS 3.9.12
I also have "Can not get the ticket cache for root" problem
I am printing over a Wifi connection from Puppy 4.1 to a HP Deskjet 3920 connected to Windows XP Home SP3 using the generic postscript method described in http://www.puppylinux.org/wiki/how-tos/ ... ronwindows
AbiWord prints fine but Geany gives the "Can not get the ticket cache for root" error described by Hillside and the log on XP when remote printing a simple file called xxx reports what looks like a postscript formatting error??:
AbiWord prints fine but Geany gives the "Can not get the ticket cache for root" error described by Hillside and the log on XP when remote printing a simple file called xxx reports what looks like a postscript formatting error??:
Error: /undefined in xxx
Operand stack:
Execution stack:
%interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1905 1 3 %oparray_pop 1904 1 3 %oparray_pop 1888 1 3 %oparray_pop 1771 1 3 %oparray_pop --nostringval-- %errorexec_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval--
Dictionary stack:
--dict:1154/1684(ro)(G)-- --dict:0/20(G)-- --dict:70/200(L)--
Current allocation mode is local
Last OS error: No such file or directory
GPL Ghostscript 8.63: Unrecoverable error, exit code 1
HPIJS updated to 2.8.12
Is this OK under 4.2-Final?
Will this be made available for WOOF?
EDIT: Went ahead nd tried it - appears to load OK in 4.2-Final ... but CUPS still is unable to handle my HP OJ-4200 ... sadly, the MS XP version of windows handles the HP printer fine.
Is this OK under 4.2-Final?
Will this be made available for WOOF?
EDIT: Went ahead nd tried it - appears to load OK in 4.2-Final ... but CUPS still is unable to handle my HP OJ-4200 ... sadly, the MS XP version of windows handles the HP printer fine.
Last edited by edoc on Tue 31 Mar 2009, 22:05, edited 1 time in total.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
HP Deskjet F380 failed
Hello,
Wondered if anyone could help. I'm a newbie to puppy and am using Boxpup 4.1.3 which I like a lot. Unfortunately, CUPS printing doesn't seem to work.
Puppy is Boxpup 413
Installed PET package hpijs-2.8.12.pet
Printer is an HP DeskJet F380 all-in-one printer. It's connected via USB.
Symptoms: error message when trying to print via CUPS. Nothing appears on the printer.
In the CUPS browser I get this error:
HP_F380_USB_1 "/usr/lib/cups/filter/foomatic-rip-hplip failed"
Printer details are shown here as:
Description: HP Deskjet F300 series
Location: Local Printer
Printer Driver: HP Deskjet f300 Series Foomatic/hpijs, hpijs 2.8.12.26
Printer State: idle, accepting jobs, published.
Device URI: usb://HP/Deskjet%20F300%20series?serial=CN66UGK1KD04KH
Then I changed /usr/lib/cups/filter/foomatic-rip-hplip to switch debug on.
This creates a logfile in /tmp/foomtic-rip.log
I think that this is the error:
renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3600" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
Starting process 23424: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
foomatic-gswrapper: gs '-sstdout=%stderr' '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 3600' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1' '-dIjsUseOutputFD' '-sOutputFile=%stdout' '-'
Insecure dependency in exec while running setuid at /usr/bin/foomatic-gswrapper line 73.
Process 23424 ending: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
renderer return value: 9
renderer received signal: 9
I didn't want to post the entire log file as it's big, but can do it if required.
Anyone have any ideas on what I should do next?
Wondered if anyone could help. I'm a newbie to puppy and am using Boxpup 4.1.3 which I like a lot. Unfortunately, CUPS printing doesn't seem to work.
Puppy is Boxpup 413
Installed PET package hpijs-2.8.12.pet
Printer is an HP DeskJet F380 all-in-one printer. It's connected via USB.
Symptoms: error message when trying to print via CUPS. Nothing appears on the printer.
In the CUPS browser I get this error:
HP_F380_USB_1 "/usr/lib/cups/filter/foomatic-rip-hplip failed"
Printer details are shown here as:
Description: HP Deskjet F300 series
Location: Local Printer
Printer Driver: HP Deskjet f300 Series Foomatic/hpijs, hpijs 2.8.12.26
Printer State: idle, accepting jobs, published.
Device URI: usb://HP/Deskjet%20F300%20series?serial=CN66UGK1KD04KH
Then I changed /usr/lib/cups/filter/foomatic-rip-hplip to switch debug on.
This creates a logfile in /tmp/foomtic-rip.log
I think that this is the error:
renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3600" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
Starting process 23424: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
foomatic-gswrapper: gs '-sstdout=%stderr' '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 3600' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1' '-dIjsUseOutputFD' '-sOutputFile=%stdout' '-'
Insecure dependency in exec while running setuid at /usr/bin/foomatic-gswrapper line 73.
Process 23424 ending: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
renderer return value: 9
renderer received signal: 9
I didn't want to post the entire log file as it's big, but can do it if required.
Anyone have any ideas on what I should do next?
@rcrsn51,
thanks for the help. I changed the file and restarted cups - still get the error.
I then rebooted and tried again - same error.
The log file has this - wondered if the 'inappropriate ioctl' bit had any bearing on it. Sorry, managed to miss that line in my earlier post:
Closing renderer
renderer PID kid4=7582
renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3600" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
Starting process 7583: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
foomatic-gswrapper: gs '-sstdout=%stderr' '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 3600' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1' '-dIjsUseOutputFD' '-sOutputFile=%stdout' '-'
Insecure dependency in exec while running setuid at /usr/bin/foomatic-gswrapper line 73.
Process 7583 ending: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
renderer return value: 9
renderer received signal: 9
KID3 exited with status 1
Renderer exit stat: 1
tail process done writing data to STDOUT
Process dying with "The renderer command line returned an unrecognized error code 9.", exit stat: 1
error: Inappropriate ioctl for device (25)
Cleaning up ...
Killing process 7582 (KID4) with signal 15
Killing process 7582 (KID4) with signal 9
Closing foomatic-rip.
Renderer process finished
Process dying with "Error closing renderer", exit stat: 1
error: Bad file descriptor (9)
Cleaning up ...
Killing process 7581 (KID3) with signal 15
Killing process 7581 (KID3) with signal 9
thanks for the help. I changed the file and restarted cups - still get the error.
I then rebooted and tried again - same error.
The log file has this - wondered if the 'inappropriate ioctl' bit had any bearing on it. Sorry, managed to miss that line in my earlier post:
Closing renderer
renderer PID kid4=7582
renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3600" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
Starting process 7583: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
foomatic-gswrapper: gs '-sstdout=%stderr' '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 3600' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1' '-dIjsUseOutputFD' '-sOutputFile=%stdout' '-'
Insecure dependency in exec while running setuid at /usr/bin/foomatic-gswrapper line 73.
Process 7583 ending: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
renderer return value: 9
renderer received signal: 9
KID3 exited with status 1
Renderer exit stat: 1
tail process done writing data to STDOUT
Process dying with "The renderer command line returned an unrecognized error code 9.", exit stat: 1
error: Inappropriate ioctl for device (25)
Cleaning up ...
Killing process 7582 (KID4) with signal 15
Killing process 7582 (KID4) with signal 9
Closing foomatic-rip.
Renderer process finished
Process dying with "Error closing renderer", exit stat: 1
error: Bad file descriptor (9)
Cleaning up ...
Killing process 7581 (KID3) with signal 15
Killing process 7581 (KID3) with signal 9
Cartridges went bad in my old Deskjet3930, so picked up
an even older Deskjet3650 for a few dollars; works fine with
new driver.
With the first printer I deleted the 600+ extra drivers one by one;
this time saved the one I need and trashed the rest of the package.
Saves about 5mb of space.
thanks
an even older Deskjet3650 for a few dollars; works fine with
new driver.
With the first printer I deleted the 600+ extra drivers one by one;
this time saved the one I need and trashed the rest of the package.
Saves about 5mb of space.
thanks
Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs