Wine 1.1.30 + winetricks +color setter +goodies ...pet & sfs

Virtual machines, emulation, etc.
Post Reply
Message
Author
User avatar
exProphecy
Posts: 335
Joined: Mon 05 Nov 2007, 16:50
Location: Bay Area, California

#81 Post by exProphecy »

Hey I just installed wine-1.1.17-i486.pet and it says I'm missing some dependencies.
For wldap32.dll.so: libldap_r-2.4.so.2 & liblder-2.4.so.2
For wineesd.drv.so: libesd.so.0

Is this going to be a problem running 3D games?
Puppy 4.3.1 + Sansa Express MP3 Player + 10GB USB Flash Drive = My triple threat OS. :wink:
I consider myself a Turritopsis Nutricula.
[url]http://www.wellminded.com/puppy/pupsearch.html[/url]
[url]http://www.esnips.com/web/exprophecypets[/url]

User avatar
technosaurus
Posts: 4853
Joined: Mon 19 May 2008, 01:24
Location: Blue Springs, MO
Contact:

#82 Post by technosaurus »

not unless you use an exe that requires them ... they are "soft" dependencies, but they are small and available from the same location as wine... see links earlier in thread
Check out my [url=https://github.com/technosaurus]github repositories[/url]. I may eventually get around to updating my [url=http://bashismal.blogspot.com]blogspot[/url].

User avatar
exProphecy
Posts: 335
Joined: Mon 05 Nov 2007, 16:50
Location: Bay Area, California

#83 Post by exProphecy »

I'm trying to play a certain game called Ragnarok Online and I'm having some trouble enabling the use of my ATI Radeon x700. There's a separate program that is the configuration of the game. There's a dropdown menu that lets you choose the type of graphics you'd like to use and I don't see my ATI Radeon x700 in there. There's only D3D. I have recently installed MU's ATI Catalyst 8.12 with Xorg. So OpenGL is enabled. Do I have to enable opengl in Wine or something? I'm using Wine 1.1.17 on Puppy 4.1.2.
Puppy 4.3.1 + Sansa Express MP3 Player + 10GB USB Flash Drive = My triple threat OS. :wink:
I consider myself a Turritopsis Nutricula.
[url]http://www.wellminded.com/puppy/pupsearch.html[/url]
[url]http://www.esnips.com/web/exprophecypets[/url]

User avatar
MU
Posts: 13649
Joined: Wed 24 Aug 2005, 16:52
Location: Karlsruhe, Germany
Contact:

#84 Post by MU »

inside of a wine game, you must use "opengl" if that is available.
If not, you can try the Direct3d driver.
Wine is mapping those drivers to Puppys native opengl drivers (in your case those from Ati).

But Ati just has limited support in Wine.
If a game uses Direct3D pixel or vertex shaders (like Bioshock), you will see black areas, or a completely black screen.
This is one reason, why I installed XP again.
To play games in Wine, Nvidia cards are the first choice.
Some run fine though in Wine with Ati, Those that support OpenGL in Windows, like "Chronicles of Riddick".

For Ragnarok, you might find hints at:

http://www.winehq.org/search?cx=partner ... q=ragnarok

http://appdb.winehq.org/objectManager.p ... on&iId=701

http://appdb.winehq.org/objectManager.p ... &iId=12042

Mark
[url=http://murga-linux.com/puppy/viewtopic.php?p=173456#173456]my recommended links[/url]

User avatar
exProphecy
Posts: 335
Joined: Mon 05 Nov 2007, 16:50
Location: Bay Area, California

#85 Post by exProphecy »

But the problem is that I don't have the option of using the ATI Radeon x700 in the settings. Otherwise, I would choose it. How come it's not there when I've installed ATI Catalyst with Xorg? Unless, it's just another ATI bug blehh
Puppy 4.3.1 + Sansa Express MP3 Player + 10GB USB Flash Drive = My triple threat OS. :wink:
I consider myself a Turritopsis Nutricula.
[url]http://www.wellminded.com/puppy/pupsearch.html[/url]
[url]http://www.esnips.com/web/exprophecypets[/url]

User avatar
MU
Posts: 13649
Joined: Wed 24 Aug 2005, 16:52
Location: Karlsruhe, Germany
Contact:

#86 Post by MU »

no, you cannot use a ati driver from inside of your game.
If you can select a manufacturers driver in your Windows program, it will not work.
Because it would be a Windows-driver!

Wine supports only these 2 generic Windows drivers: Direct3D and OpenGL.
When you select one of these two in a Windows program, then internally the Linux driver will be used, with full accelleration, if it provides it.
As you have the Linux Ati driver installed, this one will be used by Wine and so also by your game.

And as I said: usually the OpenGL Windows driver works better, but not every game has OpenGL support. So if you have bad luck, only the less good Direct3D driver is available (for example in games, that have no option to select a driver).

I hope, I coulld explain it better now.
Mark
[url=http://murga-linux.com/puppy/viewtopic.php?p=173456#173456]my recommended links[/url]

panzerpuppy
Posts: 632
Joined: Tue 02 Oct 2007, 07:39

#87 Post by panzerpuppy »

1.1.19 is out.

User avatar
technosaurus
Posts: 4853
Joined: Mon 19 May 2008, 01:24
Location: Blue Springs, MO
Contact:

#88 Post by technosaurus »

Umm.. I uploaded 1.1.19 to puppylinux.asia/members/T/

went to change permissions but the connection timed out at about the same time and now I am getting
500 OOPS: cannot change directory:/mnt/w1011/d39/s12/b02d8349/www/puppylinux.asia/members/T/

I get a similar message when I try to go to puppylinux.asia/members/T/
Cannot read /mnt/w1011/d39/s12/b02d8349/www/puppylinux.asia/members/T/.htaccess

will PM eric to try to get it fixed
Check out my [url=https://github.com/technosaurus]github repositories[/url]. I may eventually get around to updating my [url=http://bashismal.blogspot.com]blogspot[/url].

Caneri
Posts: 1513
Joined: Tue 04 Sep 2007, 13:23
Location: Canada

#89 Post by Caneri »

Hey..I just happened to be on the forum...it's fixed.

LOL..I did that to myself before....and wondered how in the world I did it. I had the wrong area highlighted when I changed perms I guess.

Anyway it's good now...directories are 755 and files are 644.

Eric
Last edited by Caneri on Mon 13 Apr 2009, 01:20, edited 1 time in total.
[color=darkred][i]Be not afraid to grow slowly, only be afraid of standing still.[/i]
Chinese Proverb[/color]

User avatar
technosaurus
Posts: 4853
Joined: Mon 19 May 2008, 01:24
Location: Blue Springs, MO
Contact:

#90 Post by technosaurus »

Thanks Eric and thanks (I haven't even told anyone about the LITE webdesktop yet - shhhh it's a secret)

anyhow updated to 1.1.19
Winelite.pet (all dependencies from previous posts)
http://puppylinux.asia/members/T/486_pe ... 9-i486.pet

Winefull.sfs
http://puppylinux.asia/members/T/apps_s ... 86_420.sfs
Check out my [url=https://github.com/technosaurus]github repositories[/url]. I may eventually get around to updating my [url=http://bashismal.blogspot.com]blogspot[/url].

User avatar
vovchik
Posts: 1507
Joined: Tue 24 Oct 2006, 00:02
Location: Ukraine

#91 Post by vovchik »

Dear techosaurus,

I tried the 1.1.19 pet last night and it installed fine under 3.01. However, I noticed that there was no ALSA support. I didn't check all the previous posts, but this may be by design. In any case, I need ALSA, so I later went to winehq.org and downloaded the slackware version - 1.1.19, converted it to a pet and now have ALSA again.

With kind regards,
vovchik

User avatar
technosaurus
Posts: 4853
Joined: Mon 19 May 2008, 01:24
Location: Blue Springs, MO
Contact:

#92 Post by technosaurus »

@vovchik - that's really not good... I compiled this one with 4.2 and the 4.2 devx ... will recompile on 4.1.2 until I can figure out where the new ALSA DEV package is so I can rebuild the new devx... I was worried about this during development, but since the 1.1.18 version works in 4.2 then I will go back to compiling on gpup and the 4.1.2 devx (smp makes for much quicker compiles)
Check out my [url=https://github.com/technosaurus]github repositories[/url]. I may eventually get around to updating my [url=http://bashismal.blogspot.com]blogspot[/url].

User avatar
mikeb
Posts: 11297
Joined: Thu 23 Nov 2006, 13:56

#93 Post by mikeb »

Well 4.20 seems to be a mix of alsa 1.1.16 and 1.1.19 which might not help

mike

User avatar
synth
Posts: 209
Joined: Wed 18 Mar 2009, 17:51

#94 Post by synth »

The ALSA libs were updated to 1.1.19,but everything else is old:

* alsa-driver
* alsa-utils
* alsa-tools
* alsa-firmware
* alsa-plugins
* alsa-oss

User avatar
technosaurus
Posts: 4853
Joined: Mon 19 May 2008, 01:24
Location: Blue Springs, MO
Contact:

#95 Post by technosaurus »

OK back to using gpup 4.1.2 ... compiling now - here are the instructions in case anyone is interested

setup gpup with devx_412.sfs

install these pets (available via petget or @ puppylinux.asia/members/T/ - puppy:linux for user:password)
cups-1.1.23
esound-0.2.41-i486
esound_DEV-0.2.41-i486
jack-audio-connection-kit-0.116.1-i486
jack-audio-connection-kit_DEV-0.116.1-i486
libexif-0.6.16
libexif-gtk-0.3.5
libgphoto2-2.4.2
libgphoto2_DEV-2.4.2
openldap-2.4.13-i486
openldap_DEV-2.4.13-i486
sane-backends-1.0.19
xorg_xorg_full_dri-7.3
xorg_xorg_full_dri_DEV-7.3

download the wine-x.x.xx.tar.bz2 and extract it somewhere

open the wine-x.x.xx folder

hit the "`" button (usually under the ESC key) to open a terminal window there

type or copy the following code and paste it into the rxvt terminal (center mouse click or right and left at the same time)

Code: Select all

./configure --prefix=/usr --build=i486-t2-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --without-hal --without-gnutls --without-capi --disable-tests
after the configure has run just type:

Code: Select all

make depend
after that's done type

Code: Select all

make -j3
it will take a while to compile even with the -j3 option (only use on dual cpu... -j5 for quad)... when that is finished you need to make pets... I do this 2 different ways for lite and full

for winelite we would type (I usually end up making this as a pet)

Code: Select all

new2dir make install-lib
for winefull we would type (I usually end up making this as a sfs)

Code: Select all

new2dir make install
I always choose to split it into a main package and DEV, DOC and NLS...(option 3) they can be recombined later

it will ask for dependencies - there are so many and since some packages aren't in the repo I don't bother with this part

after that is done its time to build our pet

for wine-lite, rename the wine-x.x.xx-486 folder to winelite-x.x.xx-486 and copy my pre-prepared fileset of goodies to the folder - (I will post a tarball of it) ... then from a terminal in its parent directory type:

Code: Select all

dir2pet winelite-x.x.xx-486
NOTE if you insert my fileset there is no need to create a menu entry

then I install winelite which will automatically run winecfg and create the /root/.wine directory which I will later copy into the sfs folder

for the winefull-x.x.xx-486.sfs I use "new2dir make install" vs "new2dir make install-lib" This "installs" additional wine development tools that aren't necessary to run programs but are good for compiling win32 exes
... this is why I also put the wine_DEV-x.x.xx folder and contents into the wine-x.x.xx-486
... I also copy the same "winegoodies" as in the winelite version
... then to save users from having to download dependencies, I convert the dependencies first to tgz and then extract them so I can include those contents as follows

Code: Select all

pet2tgz some_package.pet
click on the tar.gz to open it, extract the contents and copy them to the wine-x.x.xx-486 folder (I have all of them pre-copied to 1 folder already to make it faster)
last but not least I copy the /root/.wine folder that was created when I installed winelite to wine-x.x.xx-486/root/.wine (ensure that you set up sound, press apply and test it during the wine-lite install)
... Now all that is left is building the winefull-x.x.xx-486_412.sfs

Code: Select all

dir2sfs winefull-x.x.xx-486
Attachments
winegoodies.tar.gz
here are my goodies containing winetools, menu entries, mime types, install script and portableapps autostart to tray (assuming it is installed to /mnt/home)
(38.79 KiB) Downloaded 1270 times
Check out my [url=https://github.com/technosaurus]github repositories[/url]. I may eventually get around to updating my [url=http://bashismal.blogspot.com]blogspot[/url].

User avatar
technosaurus
Posts: 4853
Joined: Mon 19 May 2008, 01:24
Location: Blue Springs, MO
Contact:

#96 Post by technosaurus »

Check out my [url=https://github.com/technosaurus]github repositories[/url]. I may eventually get around to updating my [url=http://bashismal.blogspot.com]blogspot[/url].

panzerpuppy
Posts: 632
Joined: Tue 02 Oct 2007, 07:39

#97 Post by panzerpuppy »

Wine 1.1.20 is out.

User avatar
mikeb
Posts: 11297
Joined: Thu 23 Nov 2006, 13:56

#98 Post by mikeb »

Wine 1.1.20 is out.
hey why not update every 5 wine releses...get it down to once a month :D

mike

User avatar
technosaurus
Posts: 4853
Joined: Mon 19 May 2008, 01:24
Location: Blue Springs, MO
Contact:

#99 Post by technosaurus »

if you read my earlier post, you can see what a pain it was to maintain this package manually. Now all I have to do is run a script I wrote to maintain my packages for me.

src2all wine-X.X.XX.tar.bz2 wine.cfg Wine
(Note there is a corresponding gui called pcompile - for when I don't feel like typing - tested on 15 packages so far - worked on all but py packages which are on my todo list)

wine-X.X.XX.tar.bz2=source package
wine.cfg = file containing the ./configure options
Wine = the directory containing the full tree of all of my extra goodies

the pet is available here
http://www.murga-linux.com/puppy/viewtopic.php?t=41758

I will upload the 1.1.20 pet tonight.
Check out my [url=https://github.com/technosaurus]github repositories[/url]. I may eventually get around to updating my [url=http://bashismal.blogspot.com]blogspot[/url].

User avatar
mikeb
Posts: 11297
Joined: Thu 23 Nov 2006, 13:56

#100 Post by mikeb »

Now all I have to do is run a script I wrote to maintain my packages for me.
I noticed you had been a buzy bee... 8)

mike

Post Reply