Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Wed 27 Aug 2014, 07:06
All times are UTC - 4
 Forum index » Advanced Topics » Cutting edge
Slaxer_Pup 4.12 solid and stable non woof build
Moderators: Flash, Ian, JohnMurga
Post_new_topic   Reply_to_topic View_previous_topic :: View_next_topic
Page 3 of 32 Posts_count   Goto page: Previous 1, 2, 3, 4, 5, ..., 30, 31, 32 Next
Author Message
01micko


Joined: 11 Oct 2008
Posts: 7794
Location: qld

PostPosted: Fri 17 Apr 2009, 18:28    Post_subject:  

Hey big_bass

As you may know, I'm champing at the bit to try your creation. I wish I had have been awake to try out your first upload, but que sera, sera.

Looking forward to the next.

Thanks in anticipation.

_________________
Woof Mailing List | keep the faith Cool |
Back to top
View user's profile Send_private_message Visit_website 
big_bass

Joined: 13 Aug 2007
Posts: 1747

PostPosted: Sat 18 Apr 2009, 09:59    Post_subject:  

Sit Heal Speak

Thank you for testing and reporting what happened
and I am sorry that you had the extra trouble
of setting up your box again
the good thing is you know how to set up again quickly

when I first just read what you wrote
about your MBR not being detected
I was shocked and coulndn't
figure out how that could be possible
using a any live CD

so..after much needed sleep and finishing the 512 ISO
I imagined in my mind going through the steps you took
then I "saw" what happened

1.)everything worked correctly as a live CD
without the G force video card

2.)when you removed or installed the card after that
everything went crazy

so..what happened is when you changed the video cards
your computers CMOS went into the default mode
and your drives werent detected anymore thus your
error messages no MBR detected because it
coundnt locate a bootable drive

Did you ever watch an old TV program with a detective
named Columbo (he had a white bird) he always
scratched his head as he was walking to the door
then lifted his index finger paused then asked the big question
nobody was ready for

Am I correct?

I am shrinking a 200 GB drive
so I cant reboot this box for testing yet
but I built the new ISO on the live CD
I have 2GB of RAM to play with
so for a brutal test gparted takes 3days to shrink a 200GB
drive and during that time you can't power off
so I have been surfing the web making posts building the iso
squashing the filing system all while shrinking the drive
and leaving the computer running for three days

so I am doing some heavy testing Very Happy
hasn't froze and boy I hope it doesn't
while shrinking this drive

big_bass

_________________
debian wheezy ,linux mint, slackware I use them all and they all have good points
Mint would be best for general users though
Back to top
View user's profile Send_private_message 
Sit Heel Speak


Joined: 30 Mar 2006
Posts: 2595
Location: downwind

PostPosted: Sat 18 Apr 2009, 14:42    Post_subject:  

I think you are conflating your TV detectives. The one with the white parrot was Baretta. Columbo was the one in the trenchcoat, who would hold his cigar to his forehead when the crucial question occurred to him.

As for the sequence of events, you have the right picture in mind.

I'll have to carefully look at the xorg log and the Slack init sequence. I won't have time to do it this week. My hunch is that the GeForce is being detected, and then there is a little squirt of i2c initialization code being sent to it, video mode perhaps. However, the Slack detection is not billeting the GeForce, which is a PCI card, in the correct place in the PCI devices list. Therefore, the initialization code is being written to the PCI device which Slack thinks is the GeForce, but it is actually the mbr of the disk with the bootloader on it. This initialization code is overwriting the grub bootloader in the mbr. Luckily, the partition table is not being overwritten.

This glitch probably won't affect any systems but those rare old ones which, like mine, carry both onboard PCI video and an add-in PCI video card.
Back to top
View user's profile Send_private_message 
big_bass

Joined: 13 Aug 2007
Posts: 1747

PostPosted: Sat 18 Apr 2009, 19:52    Post_subject:  

Slaxer_Pup-412.iso.md5.txt
d0668f33bc5a2c25c59df8230f152e6a Slaxer_Pup-412.iso

85MB lzm compressed
http://puppylinux.asia/tpp/big_bass/Slaxer_pup%20ISO/Slaxer_Pup-412.iso


Code:

puppy
linux



mans best friend is
puppy pfix=ram

added click mount .lzm Slax modules
so you can modify any of those package modules offered
as a plus


slackware kernel info
and some kernel modules were already loaded in the kernel
and marked errors but that was taken care of
and were false alarms

the sfs is much smaller due to squashfs lzm compression
built in



-----------------------------Tips from MU------------------------------


A general solution is to use Puppys ability to place files in a subfolder.
In grub, I start around 20 different versions of Puppy like this:

Code:

  title Puppy 412
  root (hd0,0)
  kernel /puppy412/vmlinuz acpi=force pmedia=idehd pdev1=sda1 psubdir=puppy412
  initrd /puppy412/initrd.gz

  title Puppy 410smp (aufs)
  root (hd0,0)
  kernel /puppy410smp/vmlinuz acpi=force pmedia=idehd pdev1=sda1 psubdir=puppy410
  initrd /puppy410smp/initrd.gz


So each Puppy is in an own folder.
This avoids the confusion with several pup_412.sfs or pup_save.2fs.

Mark
---------------------------------end--------------------------------------------

_________________
debian wheezy ,linux mint, slackware I use them all and they all have good points
Mint would be best for general users though
Back to top
View user's profile Send_private_message 
vanchutr

Joined: 05 Aug 2006
Posts: 427

PostPosted: Sat 18 Apr 2009, 22:11    Post_subject:  

It's a nice, fast slaxer pup. Thank you big_bass
slaxer find and auto load all modules needed (with my comp)
This is the the /var/log/Xorg.0.log (the first time)
Code:

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux puppypc 2.6.27.7 #1 SMP Mon Nov 24 13:32:01 Local time zone must be set--see zic  i686
Build Date: 28 November 2007
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 19 07:27:01 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to:
   /usr/X11R7/lib/X11/fonts/misc/,
   /usr/X11R7/lib/X11/fonts/Type1/,
   /usr/X11R7/lib/X11/fonts/TTF/
(**) RgbPath set to "/usr/X11R7/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R7/lib/xorg/modules"
(**) Option "RandR" "on"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4520
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.3
   X.Org Video Driver: 1.2
   X.Org XInput driver : 0.7
   X.Org Server Extension : 0.3
   X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R7/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.0
   ABI class: X.Org Video Driver, version 1.2
(--) using VT number 3

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,7910 card 1458,5000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 1002,7913 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:12:0: chip 1002,4380 card 1458,b002 rev 00 class 01,06,01 hdr 00
(II) PCI: 00:13:0: chip 1002,4387 card 1458,5004 rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4388 card 1458,5004 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4389 card 1458,5004 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:3: chip 1002,438a card 1458,5004 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:4: chip 1002,438b card 1458,5004 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:5: chip 1002,4386 card 1458,5004 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4385 card 1458,4385 rev 14 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,438c card 1458,5002 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:2: chip 1002,4383 card 1458,a002 rev 00 class 04,03,00 hdr 00
(II) PCI: 00:14:3: chip 1002,438d card 1458,5001 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4384 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,01df card 0000,0000 rev a1 class 03,00,00 hdr 00
(II) PCI: 02:0f:0: chip 10ec,8167 card 1458,e000 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   [0] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
   [0] -1   0   0x0000e000 - 0x0000efff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
   [0] -1   0   0xfa000000 - 0xfcffffff (0x3000000) MX[B]
(II) Bus 1 prefetchable memory range:
   [0] -1   0   0xd0000000 - 0xdfffffff (0x10000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:20:4), (0,2,2), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 2 I/O range:
   [0] -1   0   0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
   [0] -1   0   0xfdf00000 - 0xfdffffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
   [0] -1   0   0xfde00000 - 0xfdefffff (0x100000) MX[B]
(--) PCI:*(1:0:0) nVidia Corporation GeForce 7300 GS rev 161, Mem @ 0xfa000000/24, 0xd0000000/28, 0xfb000000/24
(II) Addressable bus resource ranges are
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
   [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
   [0] -1   0   0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
   [1] -1   0   0xfe024000 - 0xfe027fff (0x4000) MX[B]
   [2] -1   0   0xfe029000 - 0xfe0290ff (0x100) MX[B]
   [3] -1   0   0xfe02a000 - 0xfe02afff (0x1000) MX[B]
   [4] -1   0   0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
   [5] -1   0   0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
   [6] -1   0   0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
   [7] -1   0   0xfe02e000 - 0xfe02efff (0x1000) MX[B]
   [8] -1   0   0xfe02f000 - 0xfe02f3ff (0x400) MX[B]
   [9] -1   0   0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
   [10] -1   0   0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
   [11] -1   0   0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
   [12] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [13] -1   0   0x0000f900 - 0x0000f90f (0x10) IX[B]
   [14] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [15] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [16] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [17] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [18] -1   0   0x00000b00 - 0x00000b0f (0x10) IX[B]
   [19] -1   0   0x0000fb00 - 0x0000fb0f (0x10) IX[B]
   [20] -1   0   0x0000fc00 - 0x0000fc03 (0x4) IX[B]
   [21] -1   0   0x0000fd00 - 0x0000fd07 (0x8) IX[B]
   [22] -1   0   0x0000fe00 - 0x0000fe03 (0x4) IX[B]
   [23] -1   0   0x0000ff00 - 0x0000ff07 (0x8) IX[B]
(II) Active PCI resource ranges after removing overlaps:
   [0] -1   0   0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
   [1] -1   0   0xfe024000 - 0xfe027fff (0x4000) MX[B]
   [2] -1   0   0xfe029000 - 0xfe0290ff (0x100) MX[B]
   [3] -1   0   0xfe02a000 - 0xfe02afff (0x1000) MX[B]
   [4] -1   0   0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
   [5] -1   0   0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
   [6] -1   0   0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
   [7] -1   0   0xfe02e000 - 0xfe02efff (0x1000) MX[B]
   [8] -1   0   0xfe02f000 - 0xfe02f3ff (0x400) MX[B]
   [9] -1   0   0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
   [10] -1   0   0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
   [11] -1   0   0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
   [12] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [13] -1   0   0x0000f900 - 0x0000f90f (0x10) IX[B]
   [14] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [15] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [16] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [17] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [18] -1   0   0x00000b00 - 0x00000b0f (0x10) IX[B]
   [19] -1   0   0x0000fb00 - 0x0000fb0f (0x10) IX[B]
   [20] -1   0   0x0000fc00 - 0x0000fc03 (0x4) IX[B]
   [21] -1   0   0x0000fd00 - 0x0000fd07 (0x8) IX[B]
   [22] -1   0   0x0000fe00 - 0x0000fe03 (0x4) IX[B]
   [23] -1   0   0x0000ff00 - 0x0000ff07 (0x8) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
   [5] -1   0   0xfe024000 - 0xfe027fff (0x4000) MX[B]
   [6] -1   0   0xfe029000 - 0xfe0290ff (0x100) MX[B]
   [7] -1   0   0xfe02a000 - 0xfe02afff (0x1000) MX[B]
   [8] -1   0   0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
   [9] -1   0   0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
   [10] -1   0   0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
   [11] -1   0   0xfe02e000 - 0xfe02efff (0x1000) MX[B]
   [12] -1   0   0xfe02f000 - 0xfe02f3ff (0x400) MX[B]
   [13] -1   0   0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
   [14] -1   0   0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
   [15] -1   0   0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
   [16] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [17] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [18] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [19] -1   0   0x0000f900 - 0x0000f90f (0x10) IX[B]
   [20] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [21] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [22] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [23] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [24] -1   0   0x00000b00 - 0x00000b0f (0x10) IX[B]
   [25] -1   0   0x0000fb00 - 0x0000fb0f (0x10) IX[B]
   [26] -1   0   0x0000fc00 - 0x0000fc03 (0x4) IX[B]
   [27] -1   0   0x0000fd00 - 0x0000fd07 (0x8) IX[B]
   [28] -1   0   0x0000fe00 - 0x0000fe03 (0x4) IX[B]
   [29] -1   0   0x0000ff00 - 0x0000ff07 (0x8) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R7/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.2
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/X11R7/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
   compiled for 1.3.0, module version = 2.1.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(WW) Warning, couldn't open module glx
(II) UnloadModule: "glx"
(EE) Failed to load module "glx" (module does not exist, 0)
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "nv"
(II) Loading /usr/X11R7/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 2.1.5
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/X11R7/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.2.3
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/X11R7/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.2.2
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.7
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
   Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
   Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
   GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
   GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
   Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
   GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
   GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
   GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
   GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
   GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
   GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
   Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
   GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
   GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
   GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
   Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
   GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
   Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
   GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
   GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
   GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
   GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
   GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
   GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
   Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
   GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
   GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
   GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
   GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
   GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
   Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
   GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
   GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
   GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
   GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
   Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
   GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
   GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
   GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
   Quadro FX 540, GeForce 6200, GeForce 6500,
   GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
   GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
   GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 6800,
   GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200,
   GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
   GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
   GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
   GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
   GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
   GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
   GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
   GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
   Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
   GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
   GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
   Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
   Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
   GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
   GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
   GeForce 8600 GT, GeForce 8400 GS, GeForce 8600M GT, GeForce 8700M GT,
   Quadro FX 370, Quadro NVS 320M, Quadro FX 570M, Quadro FX 1600M,
   Quadro FX 570, Quadro FX 1700, GeForce 8500 GT, GeForce 8400 GS,
   GeForce 8300 GS, GeForce 8600M GS, GeForce 8400M GT,
   GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
   Quadro NVS 135M, Quadro FX 360M, Quadro NVS 290
(II) Primary Device is: PCI 01:00:0
(--) Chipset GeForce 7300 GS found
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
   [5] -1   0   0xfe024000 - 0xfe027fff (0x4000) MX[B]
   [6] -1   0   0xfe029000 - 0xfe0290ff (0x100) MX[B]
   [7] -1   0   0xfe02a000 - 0xfe02afff (0x1000) MX[B]
   [8] -1   0   0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
   [9] -1   0   0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
   [10] -1   0   0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
   [11] -1   0   0xfe02e000 - 0xfe02efff (0x1000) MX[B]
   [12] -1   0   0xfe02f000 - 0xfe02f3ff (0x400) MX[B]
   [13] -1   0   0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
   [14] -1   0   0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
   [15] -1   0   0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
   [16] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [17] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [18] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [19] -1   0   0x0000f900 - 0x0000f90f (0x10) IX[B]
   [20] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [21] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [22] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [23] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [24] -1   0   0x00000b00 - 0x00000b0f (0x10) IX[B]
   [25] -1   0   0x0000fb00 - 0x0000fb0f (0x10) IX[B]
   [26] -1   0   0x0000fc00 - 0x0000fc03 (0x4) IX[B]
   [27] -1   0   0x0000fd00 - 0x0000fd07 (0x8) IX[B]
   [28] -1   0   0x0000fe00 - 0x0000fe03 (0x4) IX[B]
   [29] -1   0   0x0000ff00 - 0x0000ff07 (0x8) IX[B]
(II) resource ranges after probing:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
   [5] -1   0   0xfe024000 - 0xfe027fff (0x4000) MX[B]
   [6] -1   0   0xfe029000 - 0xfe0290ff (0x100) MX[B]
   [7] -1   0   0xfe02a000 - 0xfe02afff (0x1000) MX[B]
   [8] -1   0   0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
   [9] -1   0   0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
   [10] -1   0   0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
   [11] -1   0   0xfe02e000 - 0xfe02efff (0x1000) MX[B]
   [12] -1   0   0xfe02f000 - 0xfe02f3ff (0x400) MX[B]
   [13] -1   0   0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
   [14] -1   0   0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
   [15] -1   0   0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
   [16] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [17] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [18] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [19] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [20] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [21] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [22] -1   0   0x0000f900 - 0x0000f90f (0x10) IX[B]
   [23] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [24] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [25] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [26] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [27] -1   0   0x00000b00 - 0x00000b0f (0x10) IX[B]
   [28] -1   0   0x0000fb00 - 0x0000fb0f (0x10) IX[B]
   [29] -1   0   0x0000fc00 - 0x0000fc03 (0x4) IX[B]
   [30] -1   0   0x0000fd00 - 0x0000fd07 (0x8) IX[B]
   [31] -1   0   0x0000fe00 - 0x0000fe03 (0x4) IX[B]
   [32] -1   0   0x0000ff00 - 0x0000ff07 (0x8) IX[B]
   [33] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [34] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R7/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.0
   ABI class: X.Org Video Driver, version 1.2
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce 7300 GS"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R7/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 0.1.0
   ABI class: X.Org Video Driver, version 1.2
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xD0000000
(--) NV(0): MMIO registers at 0xFA000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0):   ...found one
(II) NV(0): Probing for analog device on output B...
(--) NV(0):   ...can't find one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0):   ... none found
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: SAM  Model: 272  Serial#: 1346711863
(II) NV(0): Year: 2007  Week: 20
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) NV(0): Sync:  Separate  Composite  SyncOnGreen
(II) NV(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.650 redY: 0.330   greenX: 0.300 greenY: 0.600
(II) NV(0): blueX: 0.150 blueY: 0.080   whiteX: 0.312 whiteY: 0.329
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): 1152x870@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) NV(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) NV(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Ranges: V min: 56  V max: 75 Hz, H min: 30  H max: 81 kHz, PixClock max 140 MHz
(II) NV(0): Monitor name: SyncMaster
(II) NV(0): Serial No: HMCP502877
(II) NV(0): EDID (in hex):
(II) NV(0):    00ffffffffffff004c2d720237314550
(II) NV(0):    141101030e221b782aaea1a6544c9926
(II) NV(0):    145054bfef8081808140714f01010101
(II) NV(0):    010101010101302a009851002a403070
(II) NV(0):    1300520e1100001e000000fd00384b1e
(II) NV(0):    510e000a202020202020000000fc0053
(II) NV(0):    796e634d61737465720a2020000000ff
(II) NV(0):    00484d43503530323837370a2020008d
(--) NV(0): CRTC 0 appears to have a CRT attached
(II) NV(0): Using CRT on CRTC 0
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(II) NV(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(II) NV(0): Modeline "640x480"   30.24  640 704 768 864  480 483 486 525 -hsync -vsync
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(II) NV(0): Modeline "720x400"   28.32  720 738 846 900  400 412 414 449 -hsync +vsync
(II) NV(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync
(II) NV(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(II) NV(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(II) NV(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(II) NV(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(II) NV(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
(II) NV(0): Modeline "1280x1024"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
(II) NV(0): Modeline "1280x960"  101.25  1280 1360 1488 1696  960 963 967 996 -hsync +vsync
(II) NV(0): Modeline "1152x864"  104.00  1152 1224 1344 1536  864 867 871 905 -hsync +vsync
(II) NV(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(--) NV(0): VideoRAM: 65536 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): Monitor0: Using hsync range of 30.00-81.00 kHz
(II) NV(0): Monitor0: Using vrefresh range of 56.00-71.00 Hz
(II) NV(0): Clock range:  12.00 to 400.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (vrefresh out of range)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (vrefresh out of range)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (vrefresh out of range)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) NV(0): Not using default mode "640x512" (vrefresh out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (mode clock too high)
(II) NV(0): Not using default mode "1600x1200" (mode clock too high)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "832x624" (vrefresh out of range)
(II) NV(0): Not using default mode "416x312" (vrefresh out of range)
(II) NV(0): Not using default mode "1152x768" (vrefresh out of range)
(II) NV(0): Not using default mode "576x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) NV(0): Not using default mode "700x525" (vrefresh out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using driver mode "640x480" (vrefresh out of range)
(II) NV(0): Not using driver mode "640x480" (vrefresh out of range)
(II) NV(0): Not using driver mode "1280x1024" (vrefresh out of range)
(II) NV(0): Not using driver mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using driver mode "832x624" (vrefresh out of range)
(II) NV(0): Not using driver mode "800x600" (vrefresh out of range)
(II) NV(0): Not using driver mode "800x600" (vrefresh out of range)
(II) NV(0): Not using driver mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using driver mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using driver mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using driver mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using driver mode "1280x960" (width too large for virtual size)
(II) NV(0): Not using default mode "1280x960" (width too large for virtual size)
(--) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) NV(0):  Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NV(0):  Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0):  Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) NV(0):  Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) NV(0): Modeline "800x600"   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync
(**) NV(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0):  Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "800x600"   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync
(**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) NV(0):  Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "700x525"   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x512"   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync
(**) NV(0):  Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
(II) NV(0): Modeline "640x480"   30.24  640 704 768 864  480 483 486 525 -hsync -vsync
(**) NV(0):  Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0):  Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480"   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0):  Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) NV(0): Modeline "720x400"   28.32  720 738 846 900  400 412 414 449 -hsync +vsync
(**) NV(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384"   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240"   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) NV(0): Display dimensions: (340, 270) mm
(**) NV(0): DPI set to (76, 72)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R7/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R7/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.2.0
   ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] 0   0   0xfb000000 - 0xfbffffff (0x1000000) MX[B]
   [1] 0   0   0xd0000000 - 0xdfffffff (0x10000000) MX[B]
   [2] 0   0   0xfa000000 - 0xfaffffff (0x1000000) MX[B]
   [3] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [4] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [5] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [6] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [7] -1   0   0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
   [8] -1   0   0xfe024000 - 0xfe027fff (0x4000) MX[B]
   [9] -1   0   0xfe029000 - 0xfe0290ff (0x100) MX[B]
   [10] -1   0   0xfe02a000 - 0xfe02afff (0x1000) MX[B]
   [11] -1   0   0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
   [12] -1   0   0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
   [13] -1   0   0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
   [14] -1   0   0xfe02e000 - 0xfe02efff (0x1000) MX[B]
   [15] -1   0   0xfe02f000 - 0xfe02f3ff (0x400) MX[B]
   [16] -1   0   0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
   [17] -1   0   0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
   [18] -1   0   0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
   [19] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
   [20] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
   [21] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
   [22] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [23] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [24] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [25] -1   0   0x0000f900 - 0x0000f90f (0x10) IX[B]
   [26] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [27] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [28] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [29] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [30] -1   0   0x00000b00 - 0x00000b0f (0x10) IX[B]
   [31] -1   0   0x0000fb00 - 0x0000fb0f (0x10) IX[B]
   [32] -1   0   0x0000fc00 - 0x0000fc03 (0x4) IX[B]
   [33] -1   0   0x0000fd00 - 0x0000fd07 (0x8) IX[B]
   [34] -1   0   0x0000fe00 - 0x0000fe03 (0x4) IX[B]
   [35] -1   0   0x0000ff00 - 0x0000ff07 (0x8) IX[B]
   [36] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
   [37] 0   0   0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xd0000000,0x4000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Indirect CPU to Screen color expansion
   Solid Lines
   Scanline Image Writes
   Offscreen Pixmaps
   Setting up tile and stipple cache:
      32 128x128 slots
      32 256x256 slots
      16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(WW) NV(0): Option "PreferredMode" is not used
(**) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc102"
(**) Keyboard0: XkbModel: "pc102"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
Back to top
View user's profile Send_private_message 
big_bass

Joined: 13 Aug 2007
Posts: 1747

PostPosted: Sat 18 Apr 2009, 23:06    Post_subject:  

vanchutr

thanks for posting


shows you more of what got loaded
Code:
 leafpad /tmp/bootkernel.log



thanks for testing


big_bass

_________________
debian wheezy ,linux mint, slackware I use them all and they all have good points
Mint would be best for general users though
Back to top
View user's profile Send_private_message 
vanchutr

Joined: 05 Aug 2006
Posts: 427

PostPosted: Sun 19 Apr 2009, 00:28    Post_subject:  

This is bootkernel.log
Code:

terrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x220-0x225 has been reserved
system 00:01: ioport range 0x290-0x294 has been reserved
system 00:02: ioport range 0x4100-0x411f has been reserved
system 00:02: ioport range 0x228-0x22f has been reserved
system 00:02: ioport range 0x40b-0x40b has been reserved
system 00:02: ioport range 0x4d6-0x4d6 has been reserved
system 00:02: ioport range 0xc00-0xc01 has been reserved
system 00:02: ioport range 0xc14-0xc14 has been reserved
system 00:02: ioport range 0xc50-0xc52 has been reserved
system 00:02: ioport range 0xc6c-0xc6d has been reserved
system 00:02: ioport range 0xc6f-0xc6f has been reserved
system 00:02: ioport range 0xcd0-0xcd1 has been reserved
system 00:02: ioport range 0xcd2-0xcd3 has been reserved
system 00:02: ioport range 0xcd4-0xcdf has been reserved
system 00:02: ioport range 0x4000-0x40fe has been reserved
system 00:02: ioport range 0x4210-0x4217 has been reserved
system 00:02: ioport range 0xb00-0xb1f could not be reserved
system 00:02: ioport range 0x238-0x23f has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0d: iomem range 0xcf000-0xcffff has been reserved
system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
system 00:0d: iomem range 0x7fee0000-0x7fefffff could not be reserved
system 00:0d: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x100000-0x7fedffff could not be reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0d: iomem range 0xfff80000-0xfffeffff could not be reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0:   IO window: 0xe000-0xefff
pci 0000:00:02.0:   MEM window: 0xfa000000-0xfcffffff
pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
pci 0000:00:14.4:   IO window: 0xd000-0xdfff
pci 0000:00:14.4:   MEM window: 0xfdf00000-0xfdffffff
pci 0000:00:14.4:   PREFETCH window: 0x000000fde00000-0x000000fdefffff
pci 0000:00:02.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [e000, efff]
bus: 01 index 1 mmio: [fa000000, fcffffff]
bus: 01 index 2 mmio: [d0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [d000, dfff]
bus: 02 index 1 mmio: [fdf00000, fdffffff]
bus: 02 index 2 mmio: [fde00000, fdefffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 1215k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
OCFS2 Node Manager 1.5.0
GFS2 (built Nov 24 2008 13:28:05) installed
msgmni has been set to 1739
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
processor ACPI0007:00: registered as cooling_device0
processor ACPI0007:01: registered as cooling_device1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
pci 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf900-0xf907
Probing IDE interface ide0...
hda: Maxtor 6L040P0, ATA DISK drive
hdb: SONY DVD RW DRU-830A, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: drive side 80-wire cable detection failed, limiting max speed to UDMA33
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: Host Protected Area detected.
   current capacity is 80041151 sectors (40981 MB)
   native  capacity is 80043264 sectors (40982 MB)
hda: Host Protected Area disabled.
hda: 80043264 sectors (40982 MB) w/8192KiB Cache, CHS=65535/16/63
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 1.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k7
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Copyright(c) 2004-2008 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
   with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
usbmon: debugfs is not available
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 4-1: new low speed USB device using ohci_hcd and address 2
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usb 4-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
input: AT Translated Set 2 keyboard as /class/input/input2
raid6: int32x1    787 MB/s
raid6: int32x2    839 MB/s
raid6: int32x4    803 MB/s
raid6: int32x8    578 MB/s
raid6: mmxx1     1705 MB/s
raid6: mmxx2     3083 MB/s
raid6: sse1x1    1729 MB/s
raid6: sse1x2    2909 MB/s
raid6: sse2x1    2851 MB/s
raid6: sse2x2    3918 MB/s
raid6: using algorithm sse2x2 (3918 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usbcore: registered new interface driver hiddev
input: Mitsumi Optical Wheel Mouse (USB) as /class/input/input3
input: USB HID v1.10 Mouse [Mitsumi Optical Wheel Mouse (USB)] on usb-0000:00:13.2-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Starting balanced_irq
Using IPI No-Shortcut mode
Freeing unused kernel memory: 392k freed
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
aufs 20081117
fuse init (API version 7.9)
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
aufs test_add:432:mount[2176]: uid/gid/perm /pup_ro2 0/0/0777, 0/0/01777
udevd version 124 started
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Linux agpgart interface v0.103
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
input: PC Speaker as /class/input/input4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:0f.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
eth0: RTL8169sc/8110sc at 0xf8dfe000, 00:1a:4d:73:31:2f, XID 18000000 IRQ 23
nvidiafb 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidiafb: Device ID: 10de01df
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog not found
Adding 506484k swap on /dev/hda10.  Priority:-1 extents:1 across:506484k
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
nvidiafb: MTRR set to ON
fbcon: NV1d (fb0) is primary device
Console: switching to colour frame buffer device 160x64
nvidiafb: PCI nVidia NV1d framebuffer (64MB @ 0xD0000000)
r8169: eth0: link up
hdb: UDMA/33 mode selected
lp0: using parport0 (interrupt-driven).
lp0: console ready

Slaxer Pup: Auto sound detect. Easy hook to Internet (via DSL). I will test with wireless.
Test SlaxerPup in 3 hour - no pain, fast, load sfs, mount sfs file of other sfs file made by other Puppy
Back to top
View user's profile Send_private_message 
pakt


Joined: 04 Jun 2005
Posts: 1089
Location: Sweden

PostPosted: Sun 19 Apr 2009, 12:25    Post_subject:  

Just saw this thread (I don't read the forum as much as I would like Sad ). Great initiative big_bass! This is exactly the kind of Puppy I want as my working version, ie, SMP support, Slackware 12.2 compatibility and updates while retaining as much as possible of Barry's original Puppy.

Here's my first report.

Self-assembled box with:
- Motherboard: Gigabyte GA-73PVM-S2H
- Processor: Intel Core2 Duo CPU E8200 @ 2.66GHz
- Memory: 1937MB (118MB used)
- OS: Slackware 12.2.0 (err... Slaxer_Pup-4.12 that is Wink)
- Graphics adapter: nVidia GeForce 7100 - on motherboard
- Display resolution: 1600x1200 pixels (NOTE: panel native resolution 1680x1050)
- Audio Adapter: HDA-Intel - HDA NVidia (Realtek ALC889A)
- Network: Realtek RTL8211B - on motherboard (module=forcedeth)
- Keyboard & mouse both USB
- IDE Disks: TSSTcorp CDDVDW SH-S202J
- SCSI Disks: ATA SAMSUNG HD502IJ
- Misc:
Generic USB SD Reader
Generic USB CF Reader
Generic USB SM Reader
Generic USB MS Reader

Xorg works but chooses the 'vesa' driver giving the wrong resolution (1600x1200 instead of 1680x1050 that I chose). Need the nVidia driver...

Network and sound work without problem.

Created pup_save file and rebooted (using GRUB) - Xorg, network and sound work as before.

I have more hardware and will try to send you further test results.

Will you be providing a devx sfs for compiling the odd driver, etc?


BTW, here's ddcprobe:
# ddcprobe
vbe: VESA 3.0 detected.
oem: NVIDIA
vendor: Build 071004.1
product: MCP73 - mcp73-80 Chip Rev
memory: 131072kb
mode: 640x400x256
mode: 640x480x256
mode: 800x600x16
mode: 800x600x256
mode: 1024x768x16
mode: 1024x768x256
mode: 1280x1024x16
mode: 1280x1024x256
mode: 320x200x64k
mode: 320x200x16m
mode: 640x480x64k
mode: 640x480x16m
mode: 800x600x64k
mode: 800x600x16m
mode: 1024x768x64k
mode: 1024x768x16m
mode: 1280x1024x64k
mode: 1280x1024x16m
edid:
edidfail
#

_________________
Testing Puppy since v0.9.2 - my desktop OS since v1.0.7
Running SlaxerPup-4.12 - Puppy with a Slackware 12.2 heart Cool
Back to top
View user's profile Send_private_message 
big_bass

Joined: 13 Aug 2007
Posts: 1747

PostPosted: Sun 19 Apr 2009, 15:22    Post_subject:  

Hey pakt

very glad to see your back posting

and I was so lucky to have you post here
thanks for testing
and reporting your results

as for the devx
what you could do also is
compile on any slackware 12.2 smp kernel
if you need something
or download one

that allows for much more flexibility


yeah I need to modify a devx too


big_bass
Back to top
View user's profile Send_private_message 
doctorgig

Joined: 19 Apr 2009
Posts: 14

PostPosted: Sun 19 Apr 2009, 20:03    Post_subject: Well done! Big_Bass  

I have tried both your version of slaxer on my P4 micron laptop, with broadcom and Prism_USB.. wireless, Now I have about 15 different flavors of puppy's running on an external HD so I believe I am a good judge, and without doubt slaxer is the fastest. All the apps just work, that is awesome.
Just about all the hardware that I tried except for the prism2_usb adapter (that did work out of all other versions of puppy). worked perfectly. I am going too try to base a pupplet on it.

2 Questions ;

1) You mention LZM compatability, does that mean we can use mo duals from slax?? AND if so how do we do it exactly?

2) Is there any way to incorporate the new packege manager from woof, that would be just "cream on the cake"

Again, Well done....
Back to top
View user's profile Send_private_message 
big_bass

Joined: 13 Aug 2007
Posts: 1747

PostPosted: Sun 19 Apr 2009, 21:59    Post_subject: Re: Well done! Big_Bass  

doctorgig wrote:
I have tried both your version of slaxer on my P4 micron laptop, with broadcom and Prism_USB.. wireless, Now I have about 15 different flavors of puppy's running on an external HD so I believe I am a good judge, and without doubt slaxer is the fastest. All the apps just work, that is awesome.
Just about all the hardware that I tried except for the prism2_usb adapter (that did work out of all other versions of puppy). worked perfectly. I am going too try to base a pupplet on it.

2 Questions ;

1) You mention LZM compatability, does that mean we can use mo duals from slax?? AND if so how do we do it exactly?

2) Is there any way to incorporate the new packege manager from woof, that would be just "cream on the cake"

Again, Well done....



Welcome to puppy doctorgig

thanks for testing and reporting

use the second iso I did some fixes you need
everyone should use the latest iso

yes, the prism2 wasnt added in Confused

ok about slax modules

I added in the important under the hood tools and added in the mounting script
but you need to add one line of code to set it up

right click on any *.lzm
its says Set Run action

add this
Code:
filemnt "$1"


now you can click mount it
then click again to unmount it

poke around inside and if it all looks good
you could just rename it from whatever.lzm to whatever.sfs
the the same as puppy handles a sfs at boot manager


dont try anything that needs KDE ok Very Happy
or you hack away and make it a pet also Cool

as far as the woof package manager
there are a few workarounds to get the simular result


anyway I have a few surprises in the plans

big_bass
use a lzm from slax.png
 Description   
 Filesize   52.93 KB
 Viewed   1558 Time(s)

use a lzm from slax.png

Back to top
View user's profile Send_private_message 
doctorgig

Joined: 19 Apr 2009
Posts: 14

PostPosted: Sun 19 Apr 2009, 22:32    Post_subject: WOW  

THANKS for the detailed and complete response.

This is starting to get VERY interesting! my mind begins to boggle with the possibilities, I have the ability to test stuff across multiple;e platforms and configs, Over the next bit of time I will try to boot it on a number of customer computers so that you have a larger test basis..

Ok just tried it on a Compaq EVO P4 laptop, worked fine found everything.

HMMM just found something, when I started using slaxer I could not get it to work other then off the CD. any install gave me a .sfs error of could not find pupfile, even though it was there.
Using the "pupdirirectory" line fixed that for my frugal install on my hardrive, Life was good!
I just tried to setup a frugal install on a flash drive using the same config line, BUT for some reason No joy, says can not find pupfile, wierd........ Slaxer is actually SO good that If I must run it from a HD only, O_well but I would like to run from a USB flash drive like other pups, any ideas?
Back to top
View user's profile Send_private_message 
big_bass

Joined: 13 Aug 2007
Posts: 1747

PostPosted: Mon 20 Apr 2009, 20:59    Post_subject:  

doctorgig



I am working on the USB problem since I like to boot using USB also
I checked it out a bit last night and discovered that the USB is detected during boot so thats good news

I need to check the install script and see why the USB wasnt listed there
I'll keep you posted

but the way I built the sfs it will allow any boot lilo or grub as long as you point to it correctly

the kernel is loading the USB correctly which is a plus

big_bass

_________________
debian wheezy ,linux mint, slackware I use them all and they all have good points
Mint would be best for general users though
Back to top
View user's profile Send_private_message 
technosaurus


Joined: 18 May 2008
Posts: 4340

PostPosted: Mon 20 Apr 2009, 23:11    Post_subject:  

I haven't checked,but it sounds like maybe the kernel modules built in to initrd.gz may be missing???
_________________
Web Programming - Pet Packaging 100 & 101
Back to top
View user's profile Send_private_message 
Roy

Joined: 31 Dec 2008
Posts: 442

PostPosted: Mon 20 Apr 2009, 23:17    Post_subject: Slaxer_Pup 4.12 back in action!!  

big_bass,

I have been following this thread a bit and am curious enough to download your work for a try... will report back in another post with my results, if successful.

Two issues present themselves while just looking at this, though. The first is that I must be able to use this off of a USB memory stick (which you are already working on). The second issue is that I don't see 1024x600 screen resolution listed as even being an available option in pakt's #ddcprobe listed above. I know that Puppy 4.x.x was the first official release that would properly display on my 1024x600 netbook with Xvesa (or, using the Generic driver in Xorg).

Will report back later this week....

-Roy
Back to top
View user's profile Send_private_message 
Display_posts:   Sort by:   
Page 3 of 32 Posts_count   Goto page: Previous 1, 2, 3, 4, 5, ..., 30, 31, 32 Next
Post_new_topic   Reply_to_topic View_previous_topic :: View_next_topic
 Forum index » Advanced Topics » Cutting edge
Jump to:  

Rules_post_cannot
Rules_reply_cannot
Rules_edit_cannot
Rules_delete_cannot
Rules_vote_cannot
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.3567s ][ Queries: 13 (0.0083s) ][ GZIP on ]