Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Fri 18 Apr 2014, 04:37
All times are UTC - 4
 Forum index » Advanced Topics » Additional Software (PETs, n' stuff) » Drivers
Extra drivers for Puppy 4.1 with 2.6.25.16 kernel
Post new topic   Reply to topic View previous topic :: View next topic
Page 8 of 17 [249 Posts]   Goto page: Previous 1, 2, 3, ..., 6, 7, 8, 9, 10, ..., 15, 16, 17 Next
Author Message
tempestuous

Joined: 10 Jun 2005
Posts: 5139
Location: Australia

PostPosted: Tue 10 Feb 2009, 05:34    Post subject:  

Do you mean the patched version of the standard driver (rtl8187-test-k2.6.25.16.pet)?
It has been widely reported as problematic.

If so, just move on to the proprietary driver - r8187-B-FEB09-k2.6.25.16.pet, posted earlier in this thread -
http://www.murga-linux.com/puppy/viewtopic.php?p=252339#252339
There's no guarantee that this driver will work, but I can't imagine it would do any harm.
Back to top
View user's profile Send private message 
mikeb


Joined: 23 Nov 2006
Posts: 7170

PostPosted: Wed 11 Feb 2009, 12:06    Post subject:  

HP 2133 notebook (and others) need alsa 1.1.7 or newer for the headphone jack to work correctly...ie cut the speakers off.

Just a little but annoying niggle .... help or compiling guidence appreciated.

I posted elswhere but perhaps this thread is more appropriate.

regards

mike
Back to top
View user's profile Send private message 
tempestuous

Joined: 10 Jun 2005
Posts: 5139
Location: Australia

PostPosted: Sun 15 Feb 2009, 00:39    Post subject:  

EDIT Feb 18 2009:
Development wifi drivers for aircrack-ng removed. See later post for better aircrack-ng-compatible drivers.

Last edited by tempestuous on Wed 18 Feb 2009, 06:46; edited 1 time in total
Back to top
View user's profile Send private message 
caka

Joined: 07 Dec 2006
Posts: 202

PostPosted: Sun 15 Feb 2009, 18:32    Post subject:  

BE CAREFULL

I installed that pet package and now my system didn't boot. I have Puppy installed in the HD and i suposse that when i uninstalled the wify pet package other files was deleted and now the PC don't boot.

tempestuous i uninstall the pet package because after reeboot the PC if i wrote "iwconfig" Puppy didn't detect any interface wify. I copy & paste some comands and you can see that didn't load the modules of my two wify cards conected to the PC (ipw4965 & ralinkUSB rt73):
Quote:

iwconfig
lo no wireless extensions.

eth0 no wireless extensions.


Quote:

# lsmod
Module Size Used by
parport_pc 32068 0
lp 12580 0
parport 35656 2 parport_pc,lp
snd_pcm_oss 40992 0
snd_seq_dummy 3844 0
snd_seq_oss 31360 0
snd_seq_midi_event 7168 1 snd_seq_oss
snd_seq 47952 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8204 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_mixer_oss 16640 1 snd_pcm_oss
usbhid 29696 0
fan 5508 0
rfkill 7188 0
input_polldev 5000 0
crc_itu_t 2176 0
tifm_sd 11144 0
squashfs 46856 0
unionfs 73572 0
fuse 48284 0
sdhci 17288 0
mmc_block 12676 0
nls_iso8859_1 4096 0
nls_cp437 5760 0
serio_raw 6788 0
iwlcore 78336 0
tifm_7xx1 7296 0
ohci1394 31792 0
led_class 4612 1 iwlcore
mac80211 155548 1 iwlcore
mmc_core 46868 3 tifm_sd,sdhci,mmc_block
pcspkr 2944 0
cfg80211 27144 2 iwlcore,mac80211
tifm_core 9748 2 tifm_sd,tifm_7xx1
ieee1394 89272 1 ohci1394
yenta_socket 26252 1
rsrc_nonstatic 12928 1 yenta_socket
i2c_i801 10000 0
tg3 114692 0
i2c_core 24592 1 i2c_i801
snd_hda_intel 333204 0
snd_pcm 73736 2 snd_pcm_oss,snd_hda_intel
snd_timer 22276 2 snd_seq,snd_pcm
snd 52772 8 snd_pcm_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer
soundcore 7520 1 snd
snd_page_alloc 10376 2 snd_hda_intel,snd_pcm
uhci_hcd 23820 0
ehci_hcd 33932 0
usbcore 136560 4 usbhid,uhci_hcd,ehci_hcd
intel_agp 26812 1
agpgart 33584 1 intel_agp
wmi 7720 0
video 19472 0
battery 12932 0
output 3840 1 video
container 4736 0
evdev 11776 0
thermal 18716 0
button 8080 0
ac 5892 0
processor 32816 2 thermal


And the more interesting, if i try to upload the wify driver for my rt73 see this:
Quote:

# modprobe rt73usb
WARNING: Error inserting rt2x00lib (/lib/modules/2.6.25.16/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting rt2x00usb (/lib/modules/2.6.25.16/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting rt73usb (/lib/modules/2.6.25.16/kernel/drivers/net/wireless/rt2x00/rt73usb.ko): Unknown symbol in module, or unknown parameter (see dmesg)
#


I forgot to type "dmesg" or other comands but if you tell me something i could help you.

Now i am going to try to reconfigure my Puppy installed in the HD for boot it.

I hope you can made another better package with the wify drivers patched.

Regards caka
Back to top
View user's profile Send private message 
caka

Joined: 07 Dec 2006
Posts: 202

PostPosted: Sun 15 Feb 2009, 19:02    Post subject:  

Quote:
Now i am going to try to reconfigure my Puppy installed in the HD for boot it.


I arrenge Puppy and now i can boot from the HD again. tempestous when i uninstalled your package i think that the file /etc/rc.d/rc.sysinit is modifiqued and Puppy don't boot.

Be carefull, I copy the file /etc/rc.d/rc.sysinit from the Live-Cd to my hark disk and now i can boot Puppy. And now i can see the interfaces for my two wify drivers but your package wirth the drivers patched don't work in my Puppy 4.1.2

Regards caka...
Back to top
View user's profile Send private message 
tempestuous

Joined: 10 Jun 2005
Posts: 5139
Location: Australia

PostPosted: Mon 16 Feb 2009, 06:58    Post subject:  

Do your testing with a live CD, not full HD install. Boot to the Puppy 4.1.2 CD, install the new wifi modules, reboot and create a pupsave file.
After the reboot, try to load the new Intel wifi driver -
Code:
modprobe iwlagn swcrypto50=1

and run this command to see if an interface has been created -
Code:
ifconfig -a

If no succes, run "dmesg" to look for clues.

But these new wifi drivers may be too cutting-edge. I will look at patching the standard Puppy wifi modules shortly.
Back to top
View user's profile Send private message 
caka

Joined: 07 Dec 2006
Posts: 202

PostPosted: Mon 16 Feb 2009, 16:29    Post subject:  

Thanks tempestuous for your job. I will be waiting for that you patch the standard Puppy wifi modules shortly. Laughing

I made the test with a live-cd installing the file pupsave and the result is the same that in Puppy installed in the HD. I copy & paste the comands and you can see that the wify drivers aren't loaded correctly. I remember you that i have two cards conected to the pc: ralink usb rt 73 & ipw4965 and booth drivers were installed correctly before install the pet package, but after that this is the result:

Quote:

# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.


Quote:

# modprobe iwlagn swcrypto50=1
FATAL: Error inserting iwlagn (/lib/modules/2.6.25.16/kernel/drivers/net/wireless/iwlwifi/iwlagn.ko): Unknown symbol in module, or unknown parameter (see dmesg)

Quote:

# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1D:72:E3:89:08
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:16

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Quote:

# dmesg
ort at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 256k freed
Yenta: CardBus bridge found at 0000:0f:06.0 [1025:011f]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:0f:06.0, mfunc 0x01aa1b22, devctl 0x64
Yenta: ISA IRQ mask 0x0cf8, PCI irq 22
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#0f) from #10 to #13
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
cs: IO port probe 0x5000-0x5fff: clean.
pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc7ffffff
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04711/0xa04000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
squashfs: version 3.3 (2007/10/31) Phillip Lougher
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
usb 6-1: new high speed USB device using ehci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
hub 6-0:1.0: unable to enumerate USB device on port 2
usb 7-1: new high speed USB device using ehci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
hub 7-0:1.0: unable to enumerate USB device on port 5
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
aufs 20080825
fuse init (API version 7.9)
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: KYE Genius USB Wheel Mouse as /devices/pci0000:00/0000:00:1d.2/usb5/5-1/5-1:1.0/input/input2
input: USB HID v1.00 Mouse [KYE Genius USB Wheel Mouse] on usb-0000:00:1d.2-1
ACPI Error (psargs-0355): [\_PR_.CPU0.CSTX] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q2F] (Node f782334c), AE_NOT_FOUND
EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ISO 9660 Extensions: RRIP_1991A
EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
udevd version 124 started
ACPI: AC Adapter [ADP1] (on-line)
ACPI: SSDT BF6D1A0E, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT BF6D136A, 061F (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
Marking TSC unstable due to: TSC halts in idle.
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button (CM) [SLPB]
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (58 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (58 C)
Clocksource tsc unstable (delta = -89802048 ns)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: WMI: Mapper loaded
ACPI: device:05 is registered as cooling_device1
Linux agpgart interface v0.103
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
tg3.c:v3.91 (April 18, 2008)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
cfg80211: no version for "struct_module" found: kernel tainted.
eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:72:e3:89:08
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
iwlagn: Unknown symbol iwl4965_agn_cfg
input: PC Speaker as /devices/platform/pcspkr/input/input7
ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:0f:06.1[A] -> GSI 22 (level, low) -> IRQ 22
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8]
sdhci: SDHCI controller found at 0000:0f:06.3 [104c:803c] (rev 0)
ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22
mmc0: SDHCI at 0xfc206800 irq 22 PIO
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb6/6-1/6-1:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r238)
rt2x00lib: disagrees about version of symbol ieee80211_register_hw
rt2x00lib: Unknown symbol ieee80211_register_hw
rt2x00lib: disagrees about version of symbol ieee80211_tx_status_irqsafe
rt2x00lib: Unknown symbol ieee80211_tx_status_irqsafe
rt2x00lib: disagrees about version of symbol ieee80211_ctstoself_get
rt2x00lib: Unknown symbol ieee80211_ctstoself_get
rt2x00lib: Unknown symbol ieee80211_start_queues
rt2x00lib: disagrees about version of symbol ieee80211_stop_queue
rt2x00lib: Unknown symbol ieee80211_stop_queue
rt2x00lib: disagrees about version of symbol ieee80211_stop_queues
rt2x00lib: Unknown symbol ieee80211_stop_queues
rt2x00lib: disagrees about version of symbol ieee80211_unregister_hw
rt2x00lib: Unknown symbol ieee80211_unregister_hw
rt2x00lib: disagrees about version of symbol ieee80211_rts_get
rt2x00lib: Unknown symbol ieee80211_rts_get
rt2x00lib: disagrees about version of symbol ieee80211_beacon_get
rt2x00lib: Unknown symbol ieee80211_beacon_get
rt2x00lib: Unknown symbol ieee80211_register_hwmode
rt2x00lib: disagrees about version of symbol ieee80211_rx_irqsafe
rt2x00lib: Unknown symbol ieee80211_rx_irqsafe
rt2x00usb: Unknown symbol rt2x00lib_suspend
rt2x00usb: Unknown symbol rt2x00lib_probe_dev
rt2x00usb: disagrees about version of symbol ieee80211_free_hw
rt2x00usb: Unknown symbol ieee80211_free_hw
rt2x00usb: disagrees about version of symbol ieee80211_alloc_hw
rt2x00usb: Unknown symbol ieee80211_alloc_hw
rt2x00usb: disagrees about version of symbol ieee80211_wake_queue
rt2x00usb: Unknown symbol ieee80211_wake_queue
rt2x00usb: Unknown symbol rt2x00lib_rxdone
rt2x00usb: Unknown symbol rt2x00lib_remove_dev
rt2x00usb: Unknown symbol rt2x00lib_txdone
rt2x00usb: Unknown symbol rt2x00lib_write_tx_desc
rt2x00usb: Unknown symbol rt2x00lib_resume
rt73usb: Unknown symbol rt2x00mac_add_interface
rt73usb: Unknown symbol rt2x00mac_get_stats
rt73usb: Unknown symbol rt2x00usb_init_rxentry
rt73usb: Unknown symbol rt2x00usb_disable_radio
rt73usb: Unknown symbol rt2x00usb_init_txentry
rt73usb: Unknown symbol rt2x00usb_vendor_request_buff
rt73usb: Unknown symbol rt2x00lib_get_ring
rt73usb: Unknown symbol rt2x00usb_write_tx_data
rt73usb: Unknown symbol rt2x00mac_config_interface
rt73usb: Unknown symbol rt2x00mac_remove_interface
rt73usb: Unknown symbol rt2x00usb_vendor_request
rt73usb: Unknown symbol rt2x00usb_probe
rt73usb: Unknown symbol rt2x00mac_config
rt73usb: Unknown symbol rt2x00lib_write_tx_desc
rt73usb: Unknown symbol rt2x00usb_suspend
rt73usb: Unknown symbol rt2x00mac_conf_tx
rt73usb: Unknown symbol rt2x00mac_start
rt73usb: Unknown symbol rt2x00mac_stop
rt73usb: Unknown symbol rt2x00usb_disconnect
rt73usb: Unknown symbol rt2x00mac_tx
rt73usb: Unknown symbol rt2x00usb_vendor_req_buff_lock
rt73usb: Unknown symbol rt2x00mac_get_tx_stats
rt73usb: Unknown symbol rt2x00usb_resume
rt73usb: Unknown symbol rt2x00usb_uninitialize
rt73usb: Unknown symbol rt2x00usb_initialize
rt73usb: Unknown symbol rt2x00mac_bss_info_changed
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001d72ffffe38908]
rt2x00lib: disagrees about version of symbol ieee80211_register_hw
rt2x00lib: Unknown symbol ieee80211_register_hw
rt2x00lib: disagrees about version of symbol ieee80211_tx_status_irqsafe
rt2x00lib: Unknown symbol ieee80211_tx_status_irqsafe
rt2x00lib: disagrees about version of symbol ieee80211_ctstoself_get
rt2x00lib: Unknown symbol ieee80211_ctstoself_get
rt2x00lib: Unknown symbol ieee80211_start_queues
rt2x00lib: disagrees about version of symbol ieee80211_stop_queue
rt2x00lib: Unknown symbol ieee80211_stop_queue
rt2x00lib: disagrees about version of symbol ieee80211_stop_queues
rt2x00lib: Unknown symbol ieee80211_stop_queues
rt2x00lib: disagrees about version of symbol ieee80211_unregister_hw
rt2x00lib: Unknown symbol ieee80211_unregister_hw
rt2x00lib: disagrees about version of symbol ieee80211_rts_get
rt2x00lib: Unknown symbol ieee80211_rts_get
rt2x00lib: disagrees about version of symbol ieee80211_beacon_get
rt2x00lib: Unknown symbol ieee80211_beacon_get
rt2x00lib: Unknown symbol ieee80211_register_hwmode
rt2x00lib: disagrees about version of symbol ieee80211_rx_irqsafe
rt2x00lib: Unknown symbol ieee80211_rx_irqsafe
rt2x00usb: Unknown symbol rt2x00lib_suspend
rt2x00usb: Unknown symbol rt2x00lib_probe_dev
rt2x00usb: disagrees about version of symbol ieee80211_free_hw
rt2x00usb: Unknown symbol ieee80211_free_hw
rt2x00usb: disagrees about version of symbol ieee80211_alloc_hw
rt2x00usb: Unknown symbol ieee80211_alloc_hw
rt2x00usb: disagrees about version of symbol ieee80211_wake_queue
rt2x00usb: Unknown symbol ieee80211_wake_queue
rt2x00usb: Unknown symbol rt2x00lib_rxdone
rt2x00usb: Unknown symbol rt2x00lib_remove_dev
rt2x00usb: Unknown symbol rt2x00lib_txdone
rt2x00usb: Unknown symbol rt2x00lib_write_tx_desc
rt2x00usb: Unknown symbol rt2x00lib_resume
rt73usb: Unknown symbol rt2x00mac_add_interface
rt73usb: Unknown symbol rt2x00mac_get_stats
rt73usb: Unknown symbol rt2x00usb_init_rxentry
rt73usb: Unknown symbol rt2x00usb_disable_radio
rt73usb: Unknown symbol rt2x00usb_init_txentry
rt73usb: Unknown symbol rt2x00usb_vendor_request_buff
rt73usb: Unknown symbol rt2x00lib_get_ring
rt73usb: Unknown symbol rt2x00usb_write_tx_data
rt73usb: Unknown symbol rt2x00mac_config_interface
rt73usb: Unknown symbol rt2x00mac_remove_interface
rt73usb: Unknown symbol rt2x00usb_vendor_request
rt73usb: Unknown symbol rt2x00usb_probe
rt73usb: Unknown symbol rt2x00mac_config
rt73usb: Unknown symbol rt2x00lib_write_tx_desc
rt73usb: Unknown symbol rt2x00usb_suspend
rt73usb: Unknown symbol rt2x00mac_conf_tx
rt73usb: Unknown symbol rt2x00mac_start
rt73usb: Unknown symbol rt2x00mac_stop
rt73usb: Unknown symbol rt2x00usb_disconnect
rt73usb: Unknown symbol rt2x00mac_tx
rt73usb: Unknown symbol rt2x00usb_vendor_req_buff_lock
rt73usb: Unknown symbol rt2x00mac_get_tx_stats
rt73usb: Unknown symbol rt2x00usb_resume
rt73usb: Unknown symbol rt2x00usb_uninitialize
rt73usb: Unknown symbol rt2x00usb_initialize
rt73usb: Unknown symbol rt2x00mac_bss_info_changed
mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
lp: driver loaded but no devices found
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xa00-0xaff: clean.
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
iwlagn: Unknown symbol iwl4965_agn_cfg
Back to top
View user's profile Send private message 
tempestuous

Joined: 10 Jun 2005
Posts: 5139
Location: Australia

PostPosted: Wed 18 Feb 2009, 07:00    Post subject:  

Here is the wifi injection/cracking utility, Aircrack-ng, plus several updated wifi drivers patched for use with aircrack-ng.
Not all wifi drivers are compatible with Aircrack-ng. From the list here
http://aircrack-ng.org/doku.php?id=install_drivers
I managed to patch the following wifi drivers in Puppy 4.1.x's 2.6.25.16 kernel.
- prism2_usb
- hostap (Prism2/2.5/3 PCI & Cardbus)
- iwl3945 & iwl4965 (Intel)
- zd1211rw (Zydas)

UPDATE July 1 2009:
Added the special variant of the ath_pci (MADWiFi) driver for the ASUS Eee.
Also updated the zd1211rw driver with a patch to support the TP-LINK WN322/422G.

After installing any of these wifi drivers, reboot.
The setup of these drivers for use with aircrack-ng is explained at the link provided above.

UPDATE:
Apparently aircrack-ng requires the "iw" utility plus "libnl" library, available later in this thread -
http://www.murga-linux.com/puppy/viewtopic.php?p=292066#292066
madwifi-hal-r4031-aircrack-k2.6.25.16.pet
Description  for Puppy 4.1.x
pet

 Download 
Filename  madwifi-hal-r4031-aircrack-k2.6.25.16.pet 
Filesize  404.59 KB 
Downloaded  1348 Time(s) 
zd1211rw-aircrack-k2.6.25.16.pet
Description  for Puppy 4.1.x
pet

 Download 
Filename  zd1211rw-aircrack-k2.6.25.16.pet 
Filesize  108.5 KB 
Downloaded  1108 Time(s) 
hostap-aircrack-k2.6.25.16.pet
Description  for Puppy 4.1.x
pet

 Download 
Filename  hostap-aircrack-k2.6.25.16.pet 
Filesize  424.24 KB 
Downloaded  1047 Time(s) 
iwl3945-iwl4965-aircrack-k2.6.25.16.pet
Description  for Puppy 4.1.x
pet

 Download 
Filename  iwl3945-iwl4965-aircrack-k2.6.25.16.pet 
Filesize  309.04 KB 
Downloaded  1957 Time(s) 
prism2_usb-0.2.9-aircrack-k2.6.25.16.pet
Description  for Puppy 4.1.x
pet

 Download 
Filename  prism2_usb-0.2.9-aircrack-k2.6.25.16.pet 
Filesize  286.14 KB 
Downloaded  994 Time(s) 
aircrack-ng-1.0-rc2.pet
Description 
pet

 Download 
Filename  aircrack-ng-1.0-rc2.pet 
Filesize  477.45 KB 
Downloaded  1567 Time(s) 

Last edited by tempestuous on Wed 01 Jul 2009, 07:08; edited 2 times in total
Back to top
View user's profile Send private message 
tempestuous

Joined: 10 Jun 2005
Posts: 5139
Location: Australia

PostPosted: Sat 21 Feb 2009, 00:06    Post subject:  

The D-Link DWL-520 rev.E1 (PCI) and DWL-650 rev.P (Cardbus) wifi devices contain the Prism3-SSF chipset, supported by the hostap_pci and hostap_cs drivers in Puppy, but these "SSF" versions also require external firmware. Puppy contains this firmware, but the unique firmware loading process involved cannot be achieved automatically by Puppy 4.1.x's pupevent mechanism.

So here is a script: /usr/local/bin/prism3-ssf-load-firmware.sh
which will load the firmware, and change the interface from the default "master" mode to "managed" mode.
This script needs to be run just after the hostap module is loaded, before the network settings take effect. A good way of achieving this is to add a configuration line to /etc/modprobe.conf which will automatically run the script each time the hostap module is loaded.

Updated instructions October 2010:
After installing this dotpet, open /etc/modprobe.conf in Geany, and add this line for the DWL-520 rev.E1 (PCI)
Code:
install hostap_pci /sbin/modprobe --ignore-install hostap_pci ; /usr/local/bin/prism3-ssf-load-firmware.sh

or for the DWL-650 rev.P (Cardbus)
Code:
install hostap_cs /sbin/modprobe --ignore-install hostap_cs ; /usr/local/bin/prism3-ssf-load-firmware.sh
prism3-ssf-load-firmware.pet
Description  for Puppy 3.x and 4.x
pet

 Download 
Filename  prism3-ssf-load-firmware.pet 
Filesize  680 Bytes 
Downloaded  1026 Time(s) 

Last edited by tempestuous on Tue 26 Oct 2010, 09:45; edited 3 times in total
Back to top
View user's profile Send private message 
disturbed

Joined: 18 Feb 2009
Posts: 9

PostPosted: Sat 21 Feb 2009, 23:45    Post subject:  

tempestuous wrote:
For the ASUS Eee 900A / 901 / 1000 / 1000H / 1000XPH / 1002HA:
Ethernet is supported out-of-the-box by the new Atheros atl1e module.
Wifi is supported out-of-the-box by the new Ralink rt2860sta module.

UPDATE Oct 11 2008 - Eee microphone
The mic in the Eee is problematic. With older versions of the ALSA audio driver it was necessary to load the snd-hda-intel driver with extra parameters. This was achieved by adding either of these lines to /etc/modprobe.conf
Code:
options snd-hda-intel model=3stack-dig

or
Code:
options snd-hda-intel model=auto

But with Puppy 4.1's version of ALSA (ver 1.0.16rc2) a modified snd-hda-intel audio driver is necessary, using a patch from here -
http://forum.eeeuser.com/viewtopic.php?pid=298419#p298419
It should add "mic boost" support as well.
Attached is the modified Eee audio driver for Puppy 4.1
After installing this dotpet, reboot.



THANK YOU! My sound now works! It did before, then all the sudden it quit. I am starting feel the need to stop using windows all together! I just need to get my bluetooth, mic and webcam working! It all works in Windows. And my battery life is incredibly awesome with PuppY! (it pretty good with xp, but awesome with puppy)

_________________
EEE PC 901 20GB SSD Linux Model with XP installed. Currently running Puppy Linux 4.1.2 from SD Card. Wireless and Resolution works GREAT!
Back to top
View user's profile Send private message 
VoodooChile

Joined: 22 Feb 2009
Posts: 2

PostPosted: Sun 22 Feb 2009, 12:19    Post subject:  

Back to top
View user's profile Send private message 
firak

Joined: 14 Apr 2008
Posts: 174

PostPosted: Wed 25 Feb 2009, 02:44    Post subject:  THE BEST FOR EEE701
Subject description: THAKS tempestuos
 

Thaks tempstuos and puppy 4.1 developer.
is it the best for me on eee 701.
amazing fast an copelte of softweare,
also tue lignt insaller of tmxxine is useffoll.
actualy it saved for me a lot of time, finding thepuppy softeweare .
The harvare of 701 works ok
y only insall madwifi-hal-0.10.5.6-r3861-k2.6.25.16.pet for the wifi.
actualy i prefer opera worwser, and in 4.1 there is an updeted version,

What in Unbuctu are still tryng to do, try to optimize for netbook is already dune form you -puppy friends!

- yust movedfrom theamzinng puppee301 to puppy 4.1 on eepc
Back to top
View user's profile Send private message 
aquilai

Joined: 14 Dec 2008
Posts: 6

PostPosted: Wed 25 Feb 2009, 12:11    Post subject: hso module for GPRS modem  

Hi guys,

Just giving some feedback on the hso package, I was previously using the method of connection given by wescht , which was working with an e220 modem but was unreliable...didn't work every time, I am running puppy 4.1.1. I switched to the hso package and cannot get it to work I am running hso_connect.sh and after trying to connect a couple of times to my provider in this case vodafone.es it bails saying it did not get an IP address from the provider. Interestingly (read frustratingly!!) now the old method of connecting (via the wvdial script) no longer works either.

I strange quirk I noticed with the wvdial method is that when it had trouble connecting if i plugged it into my ubuntu box and connected there, then swapped it back into puppy it worked first time.

Any ideas??
Back to top
View user's profile Send private message 
tempestuous

Joined: 10 Jun 2005
Posts: 5139
Location: Australia

PostPosted: Thu 26 Feb 2009, 05:36    Post subject:  

aquilai, the Huawei E220 is not compatible with the hso module.
It's compatible with the "option" module.

EDIT:
The E220 wireless modem is known by several different USB device id's.
If yours is 12d1:1003, then it will be recognised by the "option" module and should work automatically.

But if you have some other USB device ID, then you will need to use the old-fashioned method of loading the "usbserial" module with the correct USB ID's specified, as explained by forum member wescht here -
http://www.murga-linux.com/puppy/viewtopic.php?p=102973#102973

Last edited by tempestuous on Sun 15 Mar 2009, 00:17; edited 1 time in total
Back to top
View user's profile Send private message 
Schism


Joined: 12 Dec 2008
Posts: 78

PostPosted: Mon 02 Mar 2009, 19:40    Post subject: Atheros AR242 ? wifi works
Subject description: Finally Windoze free!
 

I download the madwifi-hal-r3942-aircrack-k2.6.25.16.pet and on the reboot I had wi-fi connection labeled ath0. All these years of watching Puppy and I'm finally free of Windoze, though it is still a good game system. I have had a copy of Puppy since the release of the 2.15 CE release. The first release that gave me a wi-fi connect was WOW's pupplet. I then acquired Exton LXDE which also gave me a connection. Now I have Flexxpup 1.5.5 (stripped XFCE) and I'm happy.

P.S. I would love to help with puppy. I'm currently working on my Associate in Computer Applied Science, with 5 classes left. I'm unemployed and a single parent and would love to give some time.

P.S. my daughter loves Edupup, she's a puppy fan too, and she is six.
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 8 of 17 [249 Posts]   Goto page: Previous 1, 2, 3, ..., 6, 7, 8, 9, 10, ..., 15, 16, 17 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Additional Software (PETs, n' stuff) » Drivers
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1450s ][ Queries: 13 (0.0130s) ][ GZIP on ]