ffmpeg-svn-r14332
ffmpeg-svn-r14332
This was compiled in Puppy 4 and may not work in other Puppies.
ffmpeg website:
http://ffmpeg.mplayerhq.hu/
I compiled it like this:
--prefix=/usr --cpu=i486 --enable-shared --enable-small --enable-liba52 --enable-gpl --enable-libmp3lame --enable-libvorbis --enable-postproc --enable-swscale --enable-pthreads --disable-debug --enable-libfaac --enable-libfaad
ffmpeg dotpet:
http://www.savefile.com/files/1681213
Here's the source package for this version of ffmpeg
http://www.savefile.com/files/1681243
If you want to use ffplay you'll need SDL installed. I made a dotpet at:
http://www.murga-linux.com/puppy/viewtopic.php?p=166473
The dev files are below.
Also the dependants of faac & faad are posted below.
ffmpeg website:
http://ffmpeg.mplayerhq.hu/
I compiled it like this:
--prefix=/usr --cpu=i486 --enable-shared --enable-small --enable-liba52 --enable-gpl --enable-libmp3lame --enable-libvorbis --enable-postproc --enable-swscale --enable-pthreads --disable-debug --enable-libfaac --enable-libfaad
ffmpeg dotpet:
http://www.savefile.com/files/1681213
Here's the source package for this version of ffmpeg
http://www.savefile.com/files/1681243
If you want to use ffplay you'll need SDL installed. I made a dotpet at:
http://www.murga-linux.com/puppy/viewtopic.php?p=166473
The dev files are below.
Also the dependants of faac & faad are posted below.
- Attachments
-
- faad2-2.6.pet
- (175.15 KiB) Downloaded 960 times
-
- faac-1.26.pet
- (50.15 KiB) Downloaded 874 times
-
- ffmpeg_dev-svn-r14332.pet
- (54.67 KiB) Downloaded 970 times
Last edited by plinej on Tue 22 Jul 2008, 03:21, edited 2 times in total.
Re: ffmpeg-r11518-2008-01-12
Hey plinejplinej wrote:This was compiled in Puppy 4 and may not work in other Puppies.
ffmpeg website:
http://ffmpeg.mplayerhq.hu/
I compiled it like this:
--prefix=/usr --enable-shared --enable-gpl --enable-pp --enable-swscaler --enable-pthreads --enable-x11grab --enable-liba52 --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libvorbis --disable-debug --enable-zlib --enable-small --arch=i486
ffmpeg dotpet:
http://myfreefilehosting.com/f/35c88a644d_1.57MB
If the above link doesn't work you can download it from my yahoo briefcase at:
http://tinyurl.com/3cyy8a
If you want to use ffplay you'll need SDL installed. I made a dotpet at:
http://www.murga-linux.com/puppy/viewtopic.php?p=166473
The dev files are below.
I compiled the latest ffmpeg and I was wondering about your ffmpeg it has headers but no libs
and my question is did you do this so you could compile VLC?
looking at an error you get when compiling VLC made me think about the way you set this up
my compile then converted to pet gave me the libs also 12MB as a pet
I compiled shared using puppy 3.01 and added a few more important libs
I have it installed on my machine and I will run some tests on it before I upload
the reason I am doing this is for Mplayer
on my 3.01 machine trying to have it updated to the latest
any testers ?
any need ?
anybody?
big_bass
I'm not sure what you mean. The dev files are posted to the forum but the other packages are links since they exceed the limits of this forum.
I'll post the dev files for faac & faad below.
I'll post the dev files for faac & faad below.
- Attachments
-
- faad2_dev-2.6.pet
- (48.47 KiB) Downloaded 612 times
-
- faac_dev-1.26.pet
- (2.24 KiB) Downloaded 641 times
Last edited by plinej on Tue 22 Jul 2008, 03:23, edited 1 time in total.
my error I downloaded only the dev pet I just downloaded your other and all is fineplinej wrote:I'm not sure what you mean. The dev files are posted to the forum but the other packages are links since they exceed the limits of this forum.
I did not plan to install yours since it was for version 4 and I needed version 3.01 but I did want to see if the compile was like mine .. well I used some different libs and my configure options are not the same but after such a long time of crunching out code I needed something to compare to
sorry for the false alarm
all your work looks fine now that I have all of it
good job!
big_bass
@plinej
I had a bash at compileinj ffmpeg and includeing xvid and x264 in it , from the source on this page, it didnt quite compilej.
I have Kdenlive running in Puppy 403 and cant encode to xvid or x264. Xvid and x264 are installed on my drive, but I dont know if they have to be inside ffmpeg or ffmpeg compilej for them latches onto them when needed. Can you build me a big fat ffmpeg with everything possible in it. For instance, the 'nlive team made some howto's demos in a .ogg format and 'nlive itself cant even play them, the fatter the better. Aung
I had a bash at compileinj ffmpeg and includeing xvid and x264 in it , from the source on this page, it didnt quite compilej.
I have Kdenlive running in Puppy 403 and cant encode to xvid or x264. Xvid and x264 are installed on my drive, but I dont know if they have to be inside ffmpeg or ffmpeg compilej for them latches onto them when needed. Can you build me a big fat ffmpeg with everything possible in it. For instance, the 'nlive team made some howto's demos in a .ogg format and 'nlive itself cant even play them, the fatter the better. Aung
- Attachments
-
- ffmpeg.png
- (12.73 KiB) Downloaded 3118 times
@ Aung, give this version a try:
http://www.savefile.com/files/1960174
You'll need these installed too:
http://www.savefile.com/files/1960174
You'll need these installed too:
Last edited by plinej on Sat 10 Jan 2009, 19:32, edited 1 time in total.
Here are the dev files for the version posted right above this message.
- Attachments
-
- xvidcore_dev-1.1.3.pet
- (9.27 KiB) Downloaded 640 times
-
- yasm_dev-0.7.1.pet
- (54.16 KiB) Downloaded 666 times
and finally, the ffmpeg dev files for the version posted 2 messages above.
- Attachments
-
- ffmpeg-xvid_dev-svn-r14332.pet
- (54.68 KiB) Downloaded 658 times
PlineJ & co.
I have installed this pet package and all other required files. Everything seems to work great (from a terminal). It took quite a bit of digging a tinkering to figure out the best way to do all of the conversions I needed to do. Now I have determined to do my video conversions on my webserver. My webhost already has ffmpeg installed and available at /usr/bin/ffmpeg. Before I try it on my webhost I wanted to try it on my localhost. I have written a php script to see if i can convert video formats using a PHP script. I think I am only an inch away from success, but can't quite cross the finish line.
Here is the test script:
I call the script by including the $f variable in the url like so:
http://localhost/www/conversion1.php?f=testVideo
I actaully get a file name testVideo.flv in the ClientFiles/flv/ directory, but the file size is 0kb. The same command typed directly into the terminal works flawlessly, but as soon as I uses PHP exec() I get 0kb.
I was wondering if anyone on the forum could tell me if I am not executing the command from PHP correctly or if I am need to recompile ffmpeg with a different configuration. Alternatively is there a way to read error messages from ffmpeg when executed from PHP. I have googled for several hours trying to figure this one out to no avail. Surely there is a tutorial for this somewhere.
I have installed this pet package and all other required files. Everything seems to work great (from a terminal). It took quite a bit of digging a tinkering to figure out the best way to do all of the conversions I needed to do. Now I have determined to do my video conversions on my webserver. My webhost already has ffmpeg installed and available at /usr/bin/ffmpeg. Before I try it on my webhost I wanted to try it on my localhost. I have written a php script to see if i can convert video formats using a PHP script. I think I am only an inch away from success, but can't quite cross the finish line.
Here is the test script:
Code: Select all
<?php
echo '<html><head><title>Conversion test 1</title></head><body><p>Video conversion using ffmpeg..</p>';
// input files dirname has to exist
$inputVideoPath = "ClientFiles/mov/".$f.".mov";
// output files dirname has to exist
$outputVideoPath = "ClientFiles/flv/".$f.".flv";
// path to ffmpeg
$ffmpegPath = "/usr/bin/ffmpeg";
// sampling rate (valid values are 11025, 22050, 44100)
$audSampleRate = 25050;
// bit rate of audio (valid values are 16,32,64)
$audBitRate = 64;
// Frame Width
$frameWidth = 640;
// Frame Height
$frameHeight = 480;
exec("ffmpeg -i " . $inputVideoPath . " -ar " . $audSampleRate . " -ab " . $audBitRate . " -f flv -s " . $frameWidth . "x" . $frameHeight . " " . $outputVideoPath);
echo 'Converting : '.$inputVideoPath.'<br />to<br />'.$outputVideoPath;
echo '</body></html>';
http://localhost/www/conversion1.php?f=testVideo
I actaully get a file name testVideo.flv in the ClientFiles/flv/ directory, but the file size is 0kb. The same command typed directly into the terminal works flawlessly, but as soon as I uses PHP exec() I get 0kb.
I was wondering if anyone on the forum could tell me if I am not executing the command from PHP correctly or if I am need to recompile ffmpeg with a different configuration. Alternatively is there a way to read error messages from ffmpeg when executed from PHP. I have googled for several hours trying to figure this one out to no avail. Surely there is a tutorial for this somewhere.
Is it possible for someone to compile this with the libamr codec so I can covert the 3gp videos from my cell phone? Any takers?
I can provide the PHP script I am working on if anyone is interested. I can also set it up as an extremely lightweight and flexible GUI to run on a localhost. Of course you would have to set up your own webserver, though there are a number of options as .pet packages or sfs modules, as well as xampp for Linux.
I can provide the PHP script I am working on if anyone is interested. I can also set it up as an extremely lightweight and flexible GUI to run on a localhost. Of course you would have to set up your own webserver, though there are a number of options as .pet packages or sfs modules, as well as xampp for Linux.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
MPlayer/Mencoder with libamr support is herecan8v wrote:Is it possible for someone to compile this with the libamr codec so I can covert the 3gp videos from my cell phone?
http://www.murga-linux.com/puppy/viewtopic.php?t=26511
Plinej, just checking in, xvid and x264 work a treat in Kino, but alas I did a Humpty Dumpty with kdenlive. 4.03 was not seeing my flash drive and /usr/share/applications would crash X when clicked so I decided to up to 4.04. Cant put Humpty back togeather again. I have never done a pudd, pbackup or pmirror and choose pudd, it looked the best option. I remember choosing not to fill the whole partition and set off but I cant remember what triggered me to halt pudd, I saw something amiss, but it was too late, you guessed it, pudd had already nuked all the miss-mash of rpms amd debs I built kdenlive with (even used a .pet for libfam and SDL). Pudd needs a big FAT warning that it is going to nuke that partition first. For more than a year I have been trying to install kdenlive so for the past couple of weeks I have been trying it with debs only plus kdelibs, and qt, like it says so below. I choose debs, Debian has the best librarys's set out and depends, makes the other's look like a dogs breakfast.
by Aung on Sat Jun 09, 2007 5:46 am
Is it possible to use Kdenlive without KDE installed.
What in KDE is needed to use Kdenlive? Is it possible to build Kdenlive with just the dependents - modules that Kdenlive needs. I am using Puppy Linux with JWM window manager and Rox file manager. If KDE is fully needed, what are the minumun requirements. Aung
by j-b-m on Sun Jun 10, 2007 6:19 pm
Basically, for the KDE part you should only need kdelibs, kdelibs-devel, qt and qt-devel packages. regards jbm
Alas not quite the Full Humpty, something missing, cant load a raw dv clip from kino, some sort of 'malformed URL' message. Putting the project on hold untill someone builds an amd64 kernel. Back to using kino. Aung
by Aung on Sat Jun 09, 2007 5:46 am
Is it possible to use Kdenlive without KDE installed.
What in KDE is needed to use Kdenlive? Is it possible to build Kdenlive with just the dependents - modules that Kdenlive needs. I am using Puppy Linux with JWM window manager and Rox file manager. If KDE is fully needed, what are the minumun requirements. Aung
by j-b-m on Sun Jun 10, 2007 6:19 pm
Basically, for the KDE part you should only need kdelibs, kdelibs-devel, qt and qt-devel packages. regards jbm
Alas not quite the Full Humpty, something missing, cant load a raw dv clip from kino, some sort of 'malformed URL' message. Putting the project on hold untill someone builds an amd64 kernel. Back to using kino. Aung
plinej, thanks for compiling ffmpeg.
I was hoping to download the "fat" version you made for Aung -- you listed the download url here:
http://www.savefile.com/files/1690407
but the link is dead.
Do you have it hosted elsewhere, and what is the filename?
Thanks!
I was hoping to download the "fat" version you made for Aung -- you listed the download url here:
http://www.savefile.com/files/1690407
but the link is dead.
Do you have it hosted elsewhere, and what is the filename?
Thanks!