Nvidia drivers for Puppy 3.0

Stuff that has yet to be sorted into a category.
Message
Author
vampire666
Posts: 29
Joined: Thu 15 Nov 2007, 19:33

#21 Post by vampire666 »

Hehehe.. :D
I'll try, but I can't promise anything. Oh well...I could change my drinking regime and start drinking....bloody marys. :lol: (I guess it's another addiction).

User avatar
DC
Posts: 360
Joined: Sun 30 Apr 2006, 15:07
Location: Maidenhead, England

#22 Post by DC »

Hi All,
new card problem,
Had a nvidia Geforce2 MX 440 which I had running ok with the nvidia drivers. Now have updated to a nividia 6600GT.
Upon rebooting xorgwizard came up I selected my normal settings. Then nothing. Rebooting it says loading settings from xorg.conf for about 20 seconds then fails back to command promt.
I've tried lots of combinations of editing / deleting / copying from a new installation but still the same. I want to get this installation working again as its my main work one.

So can anybody tell me how to get back to default graphics or which files to delete to force a start again.

DC
P.S. xvesa does not work either

User avatar
stevenbinion
Posts: 179
Joined: Fri 24 Aug 2007, 14:29
Location: Pittsburgh, PA - United States
Contact:

#23 Post by stevenbinion »

Thank you for these drivers. Not having them didn't effect Puppy too much, but this has made all the difference in the world for using Cedega.

User avatar
HairyWill
Posts: 2928
Joined: Fri 26 May 2006, 23:29
Location: Southampton, UK

#24 Post by HairyWill »

NVIDIA-964301-k2.6.21.7.pet works for my NVidia GeForce 5200 FX [PCI ID 10DE:0322] thank you
I think I choose not to have it update my xorg.conf
I got dumped at the prompt
xwin
bzflag seems nice and quick with all the shinies turned on

I'm now trying to play flightgear I think I'm going to need a lot of practice
Will
contribute: [url=http://www.puppylinux.org]community website[/url], [url=http://tinyurl.com/6c3nm6]screenshots[/url], [url=http://tinyurl.com/6j2gbz]puplets[/url], [url=http://tinyurl.com/57gykn]wiki[/url], [url=http://tinyurl.com/5dgr83]rss[/url]

Mojogoober
Posts: 1
Joined: Thu 03 Jan 2008, 06:00

#25 Post by Mojogoober »

Tried installing nvidia-100.14.11.pet on a HP laptop, running 3.01...

Didn't work...got this in the log:

Using: nvidia-installer ncurses user interface
-> License accepted by command line option.
-> No precompiled kernel interface was found to match your kernel; this means
that the installer will need to compile a new kernel interface.
ERROR: Unable to find the development tool `cc` in your path; please make sure
that you have the package 'gcc' installed. If gcc is installed on your
system, then please check that `cc` is in your PATH.

Thought gcc is part of the package?? so any ideas?

TIA

User avatar
cb88
Posts: 1165
Joined: Mon 29 Jan 2007, 03:12
Location: USA
Contact:

#26 Post by cb88 »

the drivers in the .pet are precompiled so something is wrong... you should not be getting that message unless you were actually trying to rebuild the drivers from source
Taking Puppy Linux to the limit of perfection. meanwhile try "puppy pfix=duct_tape" kernel parem eater.
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30

bakunin
Posts: 1
Joined: Tue 15 Jan 2008, 19:57

#27 Post by bakunin »

I'm having another problem with the drivers. I've got this old riva tnt2 on an old amdk6.

The drivers( NVIDIA-718601-k2 ) install ok, but when i try to restart the xserver, I get the nvidia logo, and when the wm (jwm) starts loading up, x freezes. I'm still able to move the mouse on the screen but that's about it. Nothing actualy loads up, not even the pinboard, just about half of the taskbar, without the tray. I can't exit x, or do anything because the keyboard and mouse clicks aren't working.

This happens only when I use the nvidia drivers. Right now i am using the nv drivers, xorgwizard reverts the "driver" in conf to these.

djringjr
Posts: 157
Joined: Sun 14 Jan 2007, 21:08

@ cb88 - Your Nvidia pet was fabulous - best I've ever used!

#28 Post by djringjr »

@ cb88 - Your Nvidia pet was fabulous - best I've ever used!

Flawless! Excellent! No problems! Elegant!

Did I say it was good?

Thanks so so so much!

David

b_linux
Posts: 11
Joined: Wed 15 Aug 2007, 01:15

Thanks!

#29 Post by b_linux »

Thank you for your work! I have used this to get my GeForce 8600GT up an running! Easy install!

I just downloaded Google Earth and it runs beautifully with these drivers.

Thanks!

User avatar
Paul-B
Posts: 44
Joined: Sat 05 May 2007, 03:37
Location: Cambridge - United Kingdom

#30 Post by Paul-B »

And what of new drivers for Dingo, any news on that?

Paul-B
[color=red]Puppy Rig:[/color] 2ghz Pentium 4 Skt423 CPU - Intel D850GB Motherboard - 1gb (4x256MB) Samsung PC800 RAM - WinFast GeForce 4 Ti4600 128MB GPU - Creative SB Live! Soundcard - Samsung 730MW 17" Widescreen LCD Monitor - 350w Antec SmartPower PSU

User avatar
sketchman
Posts: 294
Joined: Thu 01 Jun 2006, 17:20
Location: West Virginia, USA

#31 Post by sketchman »

Paul-B wrote:And what of new drivers for Dingo, any news on that?

Paul-B
I'm by no means an expert, but don't 3.x and 4.x puppies use the same kernel? I think that means they can use the same driver package.

I have this current .pet running my 4.0 puppy and it DOES work for me. No more refresh lines in my movies anymore.
"In a world that exists without walls and fences, who needs Windows and Gates?"

lawrencelkl
Posts: 2
Joined: Wed 04 Jun 2008, 13:18

where to download a driver for puppy 4.0

#32 Post by lawrencelkl »

Hi people,

I am completely new to linux so please bear with me.
I just recently installed puppy 4 and then installed openFOAM, the open source cfd program.
when i launch the paraFoam (paraview) , a viewing postprocessing tool to view the results, i get msg in the console window

Xlib:mixing "GLX" extension in display "0.0"

is this the problem with display driver? honestly i dont know what display card i have but it is a acer travelmate 270.

please kindly help me with a instruction on wher to download and how to install the or perhaps before al lthis, how to determine my display card type.

your help is very very much appreciated.

thanks

Lawrence

ricesteam
Posts: 13
Joined: Wed 04 Jun 2008, 20:38

#33 Post by ricesteam »

Hi,

I'm new to puppy. I have a GeForce 6600 and downloaded the nvidia-100-xx files. I installed it using the pup installer.

I tried following further instructions, but I can't find "install_nvidia"

When I restarted xwin, I noticed Nvidia X Server Settings installed, but when I checked my Display settings, I noticed my OpenGL config is still unknown.

What am I missing?

Thanks

User avatar
stevenbinion
Posts: 179
Joined: Fri 24 Aug 2007, 14:29
Location: Pittsburgh, PA - United States
Contact:

#34 Post by stevenbinion »

ricesteam wrote:Hi,

I'm new to puppy. I have a GeForce 6600 and downloaded the nvidia-100-xx files. I installed it using the pup installer.

I tried following further instructions, but I can't find "install_nvidia"

When I restarted xwin, I noticed Nvidia X Server Settings installed, but when I checked my Display settings, I noticed my OpenGL config is still unknown.

What am I missing?

Thanks
Xorg DRI drivers. which version of Puppy are you using?
[b][[url=http://www.tekwolf.net]Home of Wolf Pup Linux[/url]][/b]

ricesteam
Posts: 13
Joined: Wed 04 Jun 2008, 20:38

#35 Post by ricesteam »

I think I got it working. I installed the xorg-dri packages from the package installer. I'm using Puppy 4.00.

lawrencelkl
Posts: 2
Joined: Wed 04 Jun 2008, 13:18

puppy 4 with sis

#36 Post by lawrencelkl »

hi, i think i have a Sis M650 on my laptop and i have puppy 4.0. i cannot launch paraview and it keep saying the Xlib: extension "GLX" is missing. any helps please?

Thanks

Lawrence

User avatar
cb88
Posts: 1165
Joined: Mon 29 Jan 2007, 03:12
Location: USA
Contact:

#37 Post by cb88 »

well this is kinda old news but I didn't make any nvidia dotpup or pet ... it was most likely gray wow mu or tempestuous
Taking Puppy Linux to the limit of perfection. meanwhile try "puppy pfix=duct_tape" kernel parem eater.
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30

User avatar
arfon
Posts: 22
Joined: Sun 17 Aug 2008, 10:04
Location: North Wales, UK
Contact:

Perfect for GeForce 8400M GS

#38 Post by arfon »

@ gray

Brilliant nvidia drivers. I was struggling to get xorg working with anything other than a generic driver on the HurtMePlenty puppy. Then I discovered your pet which worked perfectly, and now I can use the external monitor as well.

My Laptop is a Sony VAIO VGN-SZ71MN/B with NVIDIA GeForce 8400M GS in case anyone else has similar model. The pet I used was: NVIDIA-100.14.19-k2.6.21.7.pet

Thanks very much, I'm off to game land now. :D

Arfon
(North Wales)

PS: I found it useful to start with Xvesa then
install pet - Exit X - run xorgwizard - restart X

reggiesbutchershop
Posts: 1
Joined: Thu 09 Jul 2009, 11:12

nvidia on puppy 4.2.1

#39 Post by reggiesbutchershop »

Hi, I am new to puppy. I have puppy linux on a dell latitude d520. So far everything has worked very well and I am very happy with it. However, dual monitors are necessary for my work. When I start xorg the monitors are mirrored. I have looked at what other people's suggestions and tried to install nvidia and enable the "twin view" option. When I install nvidia, i exit out of x and go into xorgwizard. The xorgwizard recognizes two different screens (it asks for the resolution for each) but when x starts (i type xwin) it goes back to the original xorg.conf file.

At the moment, I run puppy from a USB, which may be the problem. I have tried all the different versions of nvidia.pet that are available and none seem to work. Does anyone know how I can install nvidia? Any help is greatly appreciated.

qinchuan12345
Posts: 2
Joined: Fri 31 Jul 2009, 01:38

I can not install nvidia driver(Geforce 6100)

#40 Post by qinchuan12345 »

Hi,any one pleas:
I can not let nvidia Geforce 6100 work with any of the driver list above.
My computer:
cpu: AMD 2800+
mainboard:T6100 with on board nvidia Geforce 6100(c51 GPU)
memry:ddr 1G+512M
os:puppy 4.2(k2.6.21.7)

I have test all the driver above,and test other nvidia driver for puppy,after install,I reboot the computer,the sys can not start the xorg,but the Xseg is ok.I check the err file log,It show me "can not load the nvidia dirver kernel".So,is the version of puppy(k2.6.21.7) can not use these driver?The other version I hav'nt test.
plese help me.Forgive my bad English.

thank a lot!!

Post Reply