Sound ES18xx auf Armada 1700 Puppy3.01

Post Reply
Message
Author
aborg
Posts: 4
Joined: Mon 31 Mar 2008, 08:21
Location: Jena

Sound ES18xx auf Armada 1700 Puppy3.01

#1 Post by aborg »

Hallo

Ich bin neu bei Linux.
Teste deshalb verschiedene Distries auf meinen Notebook (Armada 1700, 300MHz, 288MB, 40GB).
Einzig Muppy-Puppy ist wirklich performant.

Muppy gefällt mir besser wegen der umfangreicheren Software und der anpassbaren lustigen Oberfläche (ICEWM).
Muppy 008 hat meinen PCMCIA RT2500 Wlan Adapter nicht erkannt.
Upgrade auf Puppy 3.01, jetzt geht's, aber dafür wieder in ENglish.

Meine Soudkarte erkannte bisher nur KANOTIX (ist zu langsam).
Habe unter Muppy-Puppy3.01 Alsaconf mit ES18xx laufen lassen. ->kein Sounddevice?!

Ich könnte mir die IRQ und DMA vom Computer-Setup besorgen.
Kann ich damit was anfangen?
Eventuell alsa.conf editieren?

Danke für Muppy-Puppy,
Andreas

User avatar
cat
Posts: 52
Joined: Wed 09 Apr 2008, 12:23
Location: out of place

#2 Post by cat »

Hi Andreas,
ich hab zwar 'n Armada 1500 mit Puppy, aber bei mir hat's so funktioniert:
On the bootup screen I used the bootcode 'puppy pnpbios=off', cause ALSA obviously had some trouble with this (it said something like that in the 'dmesg' I looked in when it didn't work)

After bootup I set up the soundcard manually using modprobe in the console. After fiddling around with the parameters, my final setup looks like this:
'modprobe snd_es18xx isapnp=0 port=0x220 mpu_port=0x330 dma1=1 dma2=1 irq=5 fm_port=0x388'
Der Einfachheit halber mal in Englisch, hoffe das ist OK.
Evtl. musst Du 'n bisschen rumprobieren, sollte aber eigentlich gehen.

Viel Erfolg!

aborg
Posts: 4
Joined: Mon 31 Mar 2008, 08:21
Location: Jena

#3 Post by aborg »

danke Cat,

hab leider keinen Schimmer, wo man das Plug and Play-Bios mit "puppy pnpbios=off" ausschaltet.
Als boot-Option steht es nicht zur Verfügung, wenn ich mit 'c' in die Eingabeaufforderung komme nimmt er's auch nicht ???

Tschüss,
Andreas

User avatar
cat
Posts: 52
Joined: Wed 09 Apr 2008, 12:23
Location: out of place

#4 Post by cat »

Kommt drauf an, wie Du Puppy laufen lässt. Wenn Du's als Live-Version von CD startest, kannst Du einfach beim Boot-screen (wo die anderen Beispiele für Boot-Optionen stehen)

puppy pnpbios=off

eingeben, auch wenn's da nicht als Option angeboten wird.
Wenn Du's als Frugal-Installation laufen hast, kannst Du diesen Befehl in der menu.lst datei deines Bootloaders hinter die Kernel-Zeile schreiben. Hab hier 'ne etwas andere Konfiguration als gewöhnlich, aber eigentlich müsstest Du diese Datei im Verzeichnis /boot/grub/ finden, wenn Du grub benutzt.

Hoffe ich hab Dir weitergeholfen. Nicht aufgeben, irgendwie klappts schon :)

Post Reply