WebCam for 3.01 That Works?
Yes, ChurchPup.
I have to hit the hay here but will read and follow your next suggestions in the morning.
Sure appreciate the help!
I have to hit the hay here but will read and follow your next suggestions in the morning.
Sure appreciate the help!
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
ok, should sleep, too soon
Keep us informed about your results
Important:
as you will shutdown Puppy now, for your tests tomorrow, do not forget to run Muppywebcam again, as it loads the required Kernelmodules.
After that, type:
gmplayer tv:// -tv driver=v4l2:width=352:height=288:device=/dev/video0
Have a good night, Mark
Keep us informed about your results
Important:
as you will shutdown Puppy now, for your tests tomorrow, do not forget to run Muppywebcam again, as it loads the required Kernelmodules.
After that, type:
gmplayer tv:// -tv driver=v4l2:width=352:height=288:device=/dev/video0
Have a good night, Mark
[url=http://murga-linux.com/puppy/viewtopic.php?p=173456#173456]my recommended links[/url]
Code: Select all
# Muppywebcam
ERROR: Module gspca does not exist in /proc/modules
ERROR: Module sn9c102 does not exist in /proc/modules
ERROR: Module v4l2_common is in use by videodev
ERROR: Module sn9c102 does not exist in /proc/modules
MPlayer 1.0pre8-3.3.4 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Pentium(R) M processor 1500MHz (Family: 6, Model: 9, Stepp ing: 5)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Xlib: extension "XFree86-VidModeExtension" missing on display ":0.0".
Xlib: extension "XFree86-VidModeExtension" missing on display ":0.0".
Playing tv://.
Selected driver: v4l
name: Video 4 Linux input
author: Alex Beregszaszi
comment: under development
=================================================================
WARNING: YOU ARE USING V4L DEMUXER WITH V4L2 DRIVERS!!!
As the V4L1 compatibility layer is broken, this may not work.
If you encounter any problems, use driver=v4l2 instead.
Bugreports on driver=v4l with v4l2 drivers will be ignored.
=================================================================
Selected device: Philips SPC 900NC webcam
Capabilites: capture
Device type: 1
Supported sizes: 160x120 => 640x480
Inputs: 1
0: Webcam: (tuner:0, norm:pal)
Using input 'Webcam'
Selected input hasn't got a tuner!
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 352 x 288 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [x11] 352x288 => 352x288 Planar YV12
SwScaler: using unscaled Planar YV12 -> BGRA special converter
Selected video codec: [rawyv12] vfm: raw (RAW YV12)
==========================================================================
Audio: no sound
Starting playback...
ioctl mcapture failed: Numerical result out of range
ioctl mcapture failed: Numerical result out of range
ioctl mcapture failed: Numerical result out of range
V: 0.0 1/ 1 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.0 2/ 2 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.1 3/ 3 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.1 4/ 4 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.2 5/ 5 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.2 6/ 6 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.2 7/ 7 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.3 8/ 8 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.3 9/ 9 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.4 10/ 10 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.4 11/ 11 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.4 12/ 12 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.5 13/ 13 ??% ??% ??,?% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.5 14/ 14 0% 19% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.6 15/ 15 0% 18% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.6 16/ 16 0% 18% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.6 17/ 17 0% 17% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.7 18/ 18 0% 18% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.7 19/ 19 0% 18% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.8 20/ 20 0% 18% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.8 21/ 21 0% 17% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.8 22/ 22 0% 17% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.9 23/ 23 0% 17% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 0.9 24/ 24 0% 17% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 1.0 25/ 25 0% 17% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 1.0 26/ 26 0% 17% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 1.0 27/ 27 0% 17% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 1.1 28/ 28 0% 17% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
V: 1.1 29/ 29 0% 17% 0.0% 0 0
ioctl mcapture failed: Numerical result out of range
MJP: returning!
Exiting... (Quit)
# This is xawtv-3.95, running on Linux/i686 (2.6.21.7)
Xlib: extension "XVideo" missing on display ":0.0".
Xlib: extension "XVideo" missing on display ":0.0".
WARNING: Your X-Server has no DGA support.
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
Warning: Cannot convert string "7x13bold" to type FontStruct
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to typ e FontStruct
Xlib: extension "GLX" missing on display ":0.0".
ioctl: VIDIOC_S_FMT(type=VIDEO_CAPTURE;fmt.pix.width=384;fmt.pix.height=288;fmt. pix.pixelformat=0x32315559 [YU12];fmt.pix.field=ANY;fmt.pix.bytesperline=0;fmt.p ix.sizeimage=0;fmt.pix.colorspace=unknown;fmt.pix.priv=0): Numerical result out of range
ioctl: VIDIOC_S_FMT(type=VIDEO_CAPTURE;fmt.pix.width=384;fmt.pix.height=288;fmt. pix.pixelformat=0x32315559 [YU12];fmt.pix.field=ANY;fmt.pix.bytesperline=0;fmt.p ix.sizeimage=0;fmt.pix.colorspace=unknown;fmt.pix.priv=0): Numerical result out of range
no way to get: 384x288 32 bit TrueColor (LE: bgr-)
#
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
After this I get no errors but I do get a window with an all-green display.
Code: Select all
# gmplayer tv:// driver=v4l2:width=352:height=288:device=/dev/video0
MPlayer 1.0pre8-3.3.4 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Pentium(R) M processor 1500MHz (Family: 6, Model: 9, Stepp
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Xlib: extension "XFree86-VidModeExtension" missing on display ":0.0".
Xlib: extension "XFree86-VidModeExtension" missing on display ":0.0".
Playing tv://.
Selected driver: dummy
name: NULL-TV
author: alex
Selected input hasn't got a tuner!
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 320 x 200 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [x11] 320x200 => 320x200 Planar YV12
SwScaler: using unscaled Planar YV12 -> BGRA special converter
Selected video codec: [rawyv12] vfm: raw (RAW YV12)
==========================================================================
Audio: no sound
Starting playback...
V: 1.0 29037/29037 ??% ??% ??,?% 0 0
Playing tv://.
Selected driver: dummy
name: NULL-TV
author: alex
Selected input hasn't got a tuner!
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 320 x 200 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [x11] 320x200 => 320x200 Planar YV12
Selected video codec: [rawyv12] vfm: raw (RAW YV12)
==========================================================================
Audio: no sound
Starting playback...
V: 1.0 1779/1779 ??% ??% ??,?% 0 0
Exiting... (Quit)
#
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
you forgot the -tv
To avoid typos, you can select this line with the mouse, and paste it in the consolewindow with a MIDDLE-click:
Mark
To avoid typos, you can select this line with the mouse, and paste it in the consolewindow with a MIDDLE-click:
Code: Select all
gmplayer tv:// -tv driver=v4l2:width=352:height=288:device=/dev/video0
[url=http://murga-linux.com/puppy/viewtopic.php?p=173456#173456]my recommended links[/url]
I rushed again so as to not keep you waiting ... should have had that cup of coffee first!
I also didn't know about the middle mouse click trick, that is very handy!
I also didn't know about the middle mouse click trick, that is very handy!
Code: Select all
# gmplayer tv:// -tv driver=v4l2:width=352:height=288:device=/dev/video0
MPlayer 1.0pre8-3.3.4 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Pentium(R) M processor 1500MHz (Family: 6, Model: 9, Stepping: 5)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Xlib: extension "XFree86-VidModeExtension" missing on display ":0.0".
Xlib: extension "XFree86-VidModeExtension" missing on display ":0.0".
Playing tv://.
No such driver: v4l2
Exiting... (Quit)
#
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
this tells us, that still Mplayer 1.0.8 is active.
Did you install the new one already?
If yes, please look, if you maybe have it twice now:
/usr/bin/gmplayer
and
/usr/local/bin/gmplayer
If yes, then delete
/usr/bin/gmplayer
That must be the old one then.
Mark
Did you install the new one already?
If yes, please look, if you maybe have it twice now:
/usr/bin/gmplayer
and
/usr/local/bin/gmplayer
If yes, then delete
/usr/bin/gmplayer
That must be the old one then.
Mark
[url=http://murga-linux.com/puppy/viewtopic.php?p=173456#173456]my recommended links[/url]
I think that that step in the process was forgotten last night - I meant to ask again about it.
You speculated that the Puppy301-based ChurchPup may have installed the old version of MPlayer ... but I don't know how to best uninstall it cleanly since PupGet doesn't see it.
You speculated that the Puppy301-based ChurchPup may have installed the old version of MPlayer ... but I don't know how to best uninstall it cleanly since PupGet doesn't see it.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
OK, I installed the specified new MPlayer over the top of the existing one.
I ran the gmplayer command and it failed so I re-ran Muppywebcam and then the gmplayer command ... see results below.
Note: I did not reboot the computer so there may be old MPlayer junk in the buffers so I will now reboot and try this all again. Will advise as to those results momentarily.
I ran the gmplayer command and it failed so I re-ran Muppywebcam and then the gmplayer command ... see results below.
Note: I did not reboot the computer so there may be old MPlayer junk in the buffers so I will now reboot and try this all again. Will advise as to those results momentarily.
Code: Select all
# Muppywebcam
ERROR: Module sn9c102 does not exist in /proc/modules
ERROR: Module v4l2_common is in use by videodev
ERROR: Module sn9c102 does not exist in /proc/modules
MPlayer 1.0rc1-3.4.4 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Pentium(R) M processor 1500MHz (Family: 6, Model: 9, Stepping: 5)
SSE2 supported but disabled
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing tv://.
Cache fill: 0.00% (0 bytes)
TV file format detected.
Selected driver: v4l
name: Video 4 Linux input
author: Alex Beregszaszi
comment: under development
=================================================================
WARNING: YOU ARE USING V4L DEMUXER WITH V4L2 DRIVERS!!!
As the V4L1 compatibility layer is broken, this may not work.
If you encounter any problems, use driver=v4l2 instead.
Bugreports on driver=v4l with v4l2 drivers will be ignored.
=================================================================
Selected device: Philips SPC 900NC webcam
Capabilites: capture
Device type: 1
Supported sizes: 160x120 => 640x480
Inputs: 1
0: Webcam: (tuner:0, norm:pal)
Using input 'Webcam'
Selected input hasn't got a tuner!
Xlib: extension "XVideo" missing on display ":0.0".
Sorry, Xv not supported by this X11 version/driver
******** Try with -vo x11 or -vo sdl *********
Error opening/initializing the selected video_out (-vo) device.
MPlayer interrupted by signal 11 in module: free_demuxer
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
This is xawtv-3.95, running on Linux/i686 (2.6.21.7)
# Xlib: extension "XVideo" missing on display ":0.0".
Xlib: extension "XVideo" missing on display ":0.0".
WARNING: Your X-Server has no DGA support.
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
Warning: Cannot convert string "7x13bold" to type FontStruct
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
Xlib: extension "GLX" missing on display ":0.0".
ioctl: VIDIOC_S_FMT(type=VIDEO_CAPTURE;fmt.pix.width=384;fmt.pix.height=288;fmt.pix.pixelformat=0x32315559 [YU12];fmt.pix.field=ANY;fmt.pix.bytesperline=0;fmt.pix.sizeimage=0;fmt.pix.colorspace=unknown;fmt.pix.priv=0): Numerical result out of range
ioctl: VIDIOC_S_FMT(type=VIDEO_CAPTURE;fmt.pix.width=384;fmt.pix.height=288;fmt.pix.pixelformat=0x32315559 [YU12];fmt.pix.field=ANY;fmt.pix.bytesperline=0;fmt.pix.sizeimage=0;fmt.pix.colorspace=unknown;fmt.pix.priv=0): Numerical result out of range
no way to get: 384x288 32 bit TrueColor (LE: bgr-)
# gmplayer tv:// -tv driver=v4l2:width=352:height=288:device=/dev/video0
MPlayer 1.0rc1-3.4.4 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Pentium(R) M processor 1500MHz (Family: 6, Model: 9, Stepping: 5)
SSE2 supported but disabled
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing tv://.
Cache fill: 0.00% (0 bytes)
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
comment: first try, more to come ;-)
Selected device: Philips SPC 900NC webcam
Capabilites: video capture read/write streaming
supported norms: 0 = webcam;
inputs: 0 = usb;
Current input: 0
Current format: YUV420
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set width failed: Numerical result out of range
v4l2: ioctl set height failed: Numerical result out of range
Selected input hasn't got a tuner!
v4l2: ioctl set mute failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
FPS not specified in the header or invalid, use the -fps option.
No stream found.
v4l2: ioctl set mute failed: Invalid argument
v4l2: 0 frames successfully processed, 0 frames dropped.
Exiting... (Quit)
#
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Note: I had rebooted prior to this.
Code: Select all
# gmplayer
MPlayer 1.0rc1-3.4.4 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Pentium(R) M processor 1500MHz (Family: 6, Model: 9, Stepping: 5)
SSE2 supported but disabled
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Exiting... (Quit)
# Muppywebcam
ERROR: Module sn9c102 does not exist in /proc/modules
ERROR: Module v4l2_common is in use by videodev
ERROR: Module sn9c102 does not exist in /proc/modules
MPlayer 1.0rc1-3.4.4 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Pentium(R) M processor 1500MHz (Family: 6, Model: 9, Stepping: 5)
SSE2 supported but disabled
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing tv://.
Cache fill: 0.00% (0 bytes)
TV file format detected.
Selected driver: v4l
name: Video 4 Linux input
author: Alex Beregszaszi
comment: under development
=================================================================
WARNING: YOU ARE USING V4L DEMUXER WITH V4L2 DRIVERS!!!
As the V4L1 compatibility layer is broken, this may not work.
If you encounter any problems, use driver=v4l2 instead.
Bugreports on driver=v4l with v4l2 drivers will be ignored.
=================================================================
Selected device: Philips SPC 900NC webcam
Capabilites: capture
Device type: 1
Supported sizes: 160x120 => 640x480
Inputs: 1
0: Webcam: (tuner:0, norm:pal)
Using input 'Webcam'
Selected input hasn't got a tuner!
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 352 x 288 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [x11] 352x288 => 352x288 Planar YV12
SwScaler: using unscaled yuv420p -> rgb32 special converter
Selected video codec: [rawyv12] vfm: raw (RAW YV12)
==========================================================================
Audio: no sound
Starting playback...
ioctl mcapture failed: Numerical result out of range
ioctl mcapture failed: Numerical result out of range
ioctl mcapture failed: Numerical result out of range
V: 0.0 1/ 1 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.0 2/ 2 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.1 3/ 3 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.1 4/ 4 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.2 5/ 5 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.2 6/ 6 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.2 7/ 7 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.3 8/ 8 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.3 9/ 9 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.4 10/ 10 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.4 11/ 11 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.4 12/ 12 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.5 13/ 13 ??% ??% ??,?% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.5 14/ 14 0% 8% 0.0% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.6 15/ 15 0% 7% 0.0% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.6 16/ 16 0% 8% 0.0% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.6 17/ 17 0% 8% 0.0% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.7 18/ 18 0% 8% 0.0% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.7 19/ 19 0% 8% 0.0% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.8 20/ 20 0% 8% 0.0% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.8 21/ 21 0% 8% 0.0% 0 0 0%
ioctl mcapture failed: Numerical result out of range
V: 0.8 22/ 22 0% 8% 0.0% 0 0 0%
ioctl mcapture failed: Numerical result out of range
MJP: returning!
Exiting... (Quit)
This is xawtv-3.95, running on Linux/i686 (2.6.21.7)
# Xlib: extension "XVideo" missing on display ":0.0".
Xlib: extension "XVideo" missing on display ":0.0".
WARNING: Your X-Server has no DGA support.
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
Warning: Cannot convert string "7x13bold" to type FontStruct
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to typ e FontStruct
Xlib: extension "GLX" missing on display ":0.0".
ioctl: VIDIOC_S_FMT(type=VIDEO_CAPTURE;fmt.pix.width=384;fmt.pix.height=288;fmt. pix.pixelformat=0x32315559 [YU12];fmt.pix.field=ANY;fmt.pix.bytesperline=0;fmt.p ix.sizeimage=0;fmt.pix.colorspace=unknown;fmt.pix.priv=0): Numerical result out of range
ioctl: VIDIOC_S_FMT(type=VIDEO_CAPTURE;fmt.pix.width=384;fmt.pix.height=288;fmt. pix.pixelformat=0x32315559 [YU12];fmt.pix.field=ANY;fmt.pix.bytesperline=0;fmt.p ix.sizeimage=0;fmt.pix.colorspace=unknown;fmt.pix.priv=0): Numerical result out of range
no way to get: 384x288 32 bit TrueColor (LE: bgr-)
# gmplayer tv:// -tv driver=v4l2:width=352:height=288:device=/dev/video0
MPlayer 1.0rc1-3.4.4 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Pentium(R) M processor 1500MHz (Family: 6, Model: 9, Stepping: 5)
SSE2 supported but disabled
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing tv://.
Cache fill: 0.00% (0 bytes)
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
comment: first try, more to come ;-)
Selected device: Philips SPC 900NC webcam
Capabilites: video capture read/write streaming
supported norms: 0 = webcam;
inputs: 0 = usb;
Current input: 0
Current format: YUV420
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set width failed: Numerical result out of range
v4l2: ioctl set height failed: Numerical result out of range
Selected input hasn't got a tuner!
v4l2: ioctl set mute failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
FPS not specified in the header or invalid, use the -fps option.
No stream found.
v4l2: ioctl set mute failed: Invalid argument
v4l2: 0 frames successfully processed, 0 frames dropped.
Exiting... (Quit)
#
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
This doesn't exist.MU wrote:this tells us, that still Mplayer 1.0.8 is active.
Did you install the new one already?
If yes, please look, if you maybe have it twice now:
/usr/bin/gmplayer
This is there.MU wrote: and
/usr/local/bin/gmplayer
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Is it possible to cleanly and completely uninstall MPlayer and then reinstall?
Perhaps there is a corrupted file which installing over the top does not replace?
Sure hate to stall yet again on another feature when so close!
Perhaps there is a corrupted file which installing over the top does not replace?
Sure hate to stall yet again on another feature when so close!
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
I think a re-installation will not help.
Hm, maybe one other issue, please try:
And also:
Mark
Hm, maybe one other issue, please try:
Code: Select all
gmplayer tv:// -tv driver=v4l:width=160:height=120:device=/dev/video0
Code: Select all
gmplayer tv:// -tv driver=v4l2:width=160:height=120:device=/dev/video0
[url=http://murga-linux.com/puppy/viewtopic.php?p=173456#173456]my recommended links[/url]
THIS ONE WORKED!!!!!MU wrote:I think a re-installation will not help.
Hm, maybe one other issue, please try:
Code: Select all
gmplayer tv:// -tv driver=v4l:width=160:height=120:device=/dev/video0
This one didn't.MU wrote: And also:MarkCode: Select all
gmplayer tv:// -tv driver=v4l2:width=160:height=120:device=/dev/video0
This is terrific news ... now I just have to figure out how to stream the video to someone via videoconferencing and how to capture a snapshot to send.
Thanks! doc
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Oh, there was an error pop-up that just had a series of "=============" but no text.
Clicking on OK made it go away and had no negative impact on the webcam.
Clicking on OK made it go away and had no negative impact on the webcam.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
I have no idea, why this is.Oh, there was an error pop-up that just had a series of "=============" but no text.
I don't get that here.
Please install Muppywebcam again (over the old one, no need to uninstall first):
http://murga-linux.com/puppy/viewtopic. ... ch&id=8941
I added a dialog, where you can choose the resolution for gmplayer.
Your camera also should work with 640x480.
I also added a startup-script for X.
Im very happy it woorks nowThis is terrific news ... now I just have to figure out how to stream the video to someone via videoconferencing and how to capture a snapshot to send.
For videoconferencing, skype should work.
Please read this thread:
http://murga-linux.com/puppy/viewtopic.php?t=27889
WhoD writes:
This currently requires, that you run Muppywebcam before skype, as it loads all Kernel-modules for you.Open Skype, open Main Menu and select Options>Video Devices. Your Logitech Quickcam should be shown as the available device. Click the Test button, but make sure you have sufficient light or the output will look pretty dark.
To avoid this, you can do this:
edit the file /root/.xinitrc
Add as second line (after the line "#!/bin/sh") this line:
Code: Select all
/usr/local/Muppywebcam-Puppy301/Muppywebcam-nogui &
Mark
[url=http://murga-linux.com/puppy/viewtopic.php?p=173456#173456]my recommended links[/url]