Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Mon 22 Dec 2014, 09:43
All times are UTC - 4
 Forum index » Advanced Topics » Hardware
Identifying the chipset in your wireless card.
Moderators: Flash, Ian, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 1 [4 Posts]  
Author Message
kirk

Joined: 11 Nov 2005
Posts: 1437
Location: florida

PostPosted: Wed 16 Aug 2006, 15:24    Post subject:  Identifying the chipset in your wireless card.  

To use a linux driver with your wireless card, the first step is to find out what chipset it uses. Go to the linked page below and choose the manufacturer of your wireless card, then click show. After you find the chipset of your card, you can search the form for a driver or compile one your self.

http://linux-wless.passys.nl/
Back to top
View user's profile Send private message 
kelewax


Joined: 04 Nov 2005
Posts: 41
Location: Nigeria

PostPosted: Wed 16 Aug 2006, 15:54    Post subject:  

Hi,
Thanks for this post. It's really very useful.

_________________
Which of the favours of your Lord can you deny?
Back to top
View user's profile Send private message 
yorkiesnorkie


Joined: 04 Jun 2007
Posts: 505
Location: George's Island

PostPosted: Mon 18 Feb 2008, 14:22    Post subject: card identification in the console  

For a pcmcia cards you can get information on the chip by opening the console and typing "cardctl ident " at the command prompt, then press enter. This will help identify the correct driver to load in Puppy's connection wizard. e.g.

Code:

 # cardctl ident
Socket 0:
  no product info available
Socket 1:
  product info: "Realtek", "Rtl8139"
  manfid: 0x0000, 0x024c
  function: 6 (network)


Pay attention to the line which has "manfid: 0x0000, 0x024c' on it as you can use this string to search the net find the chip should the line with the product info be incorrect. My pcmcia card identified the chip as "Rtl8139" which was not actually correct. I had help from Tempestuous who pointed out this discrepancy and identified the correct driver to use. I needed to use the "r8180" driver listed in the wireless wizard to get a working connection.

Yorkiesnorkie
Back to top
View user's profile Send private message 
MrWho

Joined: 20 Mar 2008
Posts: 6
Location: Coimbra, Portugal

PostPosted: Thu 20 Mar 2008, 08:57    Post subject:  

I suspect that table could be wrong sometimes, because many times the manufacturer changes the specs but maintain the same model number.

I'll give you my example: I have an Allied Telesyn WCL007 wifi card. According to that site, it should use the hostap driver, but in fact the only driver I could get it to work with was the bcm43xx (which puppy in fact autodetects).

Unfortunately I can't physically check the chip on the card since it has a big metal box covering almost everything.

Just my two cents...
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 1 of 1 [4 Posts]  
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Hardware
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.0491s ][ Queries: 12 (0.0046s) ][ GZIP on ]