Puppy 3.01 final bugs reports here

Please post any bugs you have found
Message
Author
User avatar
Pizzasgood
Posts: 6183
Joined: Wed 04 May 2005, 20:28
Location: Knoxville, TN, USA

#141 Post by Pizzasgood »

It sound like Puppy wasn't loading into ram, or else was but only left a very small amount for using.
[size=75]Between depriving a man of one hour from his life and depriving him of his life there exists only a difference of degree. --Muad'Dib[/size]
[img]http://www.browserloadofcoolness.com/sig.png[/img]

User avatar
Flash
Official Dog Handler
Posts: 13071
Joined: Wed 04 May 2005, 16:04
Location: Arizona USA

#142 Post by Flash »

I just realized that the HTML composer window is missing from SeaMonkey in 3.01. When I click on the "html" desktop icon a little window pops up saying
Please open Composer from Window menu of currently running Mozilla
but I can't find the composer anywhere in SeaMonkey.

It was there in previous Puppys. What gives?

User avatar
WhoDo
Posts: 4428
Joined: Wed 12 Jul 2006, 01:58
Location: Lake Macquarie NSW Australia

#143 Post by WhoDo »

Flash wrote:I just realized that the HTML composer window is missing from SeaMonkey in 3.01. When I click on the "html" desktop icon a little window pops up saying
Please open Composer from Window menu of currently running Mozilla
but I can't find the composer anywhere in SeaMonkey.

It was there in previous Puppys. What gives?
Which version of Seamonkey? One of them was badly flawed.

I'm using Seamonkey 1.1.7 in Puppy 3.01 and it works fine. See Window>Composer or press Ctrl+4 and it should pop up.

Hope that helps.
[i]Actions speak louder than words ... and they usually work when words don't![/i]
SIP:whodo@proxy01.sipphone.com; whodo@realsip.com

User avatar
Flash
Official Dog Handler
Posts: 13071
Joined: Wed 04 May 2005, 16:04
Location: Arizona USA

#144 Post by Flash »

WhoDo wrote:
Flash wrote:I just realized that the HTML composer window is missing from SeaMonkey in 3.01. When I click on the "html" desktop icon a little window pops up saying
Please open Composer from Window menu of currently running Mozilla
but I can't find the composer anywhere in SeaMonkey.
Which version of Seamonkey? One of them was badly flawed.

I'm using Seamonkey 1.1.7 in Puppy 3.01 and it works fine. See Window>Composer or press Ctrl+4 and it should pop up.
In SeaMonkey's Help > About it says SeaMonkey 1.1.2. There's no Composer in the drop-down menu under Window, only Navigator, and Ctrl+4 does nothing. Hm, I downloaded Puppy 3.01. /etc/puppyversion says 301. What happened? :?
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=69321][color=blue]Puppy Help 101 - an interactive tutorial for Lupu 5.25[/color][/url]

User avatar
WhoDo
Posts: 4428
Joined: Wed 12 Jul 2006, 01:58
Location: Lake Macquarie NSW Australia

#145 Post by WhoDo »

Flash wrote:In SeaMonkey's Help > About it says SeaMonkey 1.1.2. There's no Composer in the drop-down menu under Window, only Navigator, and Ctrl+4 does nothing. Hm, I downloaded Puppy 3.01. /etc/puppyversion says 301. What happened? :?
Yep. That's the flawed version that came with Puppy 3.01 so you'll need to upgrade. It's easy though. Just go to the Seamonkey Project page and download the full installer. It's a one-click GUI install that I've found relatively painless.

Hope that helps, and if BarryK does decide to put out a bug-fix version 3.02, I also hope he includes the Seamonkey update.

Cheers
[i]Actions speak louder than words ... and they usually work when words don't![/i]
SIP:whodo@proxy01.sipphone.com; whodo@realsip.com

User avatar
Flash
Official Dog Handler
Posts: 13071
Joined: Wed 04 May 2005, 16:04
Location: Arizona USA

#146 Post by Flash »

Thanks. :D

User avatar
Flash
Official Dog Handler
Posts: 13071
Joined: Wed 04 May 2005, 16:04
Location: Arizona USA

#147 Post by Flash »

Ok, I downloaded the latest SeaMonkey and tried it out. It seems to open faster than the version that came with 3.01, and I generally like it, but I didn't save it because of a few problems I'd like to clear up first.

1) How do I install it so that clicking on the desktop "browse" icon starts the new version? I can only start it by typing ./seamonkey in an rxvt window. I guess what I'm asking is, is it possible to replace the old version, and how do I do that?

2) How do I install Flash? Nearly every website I open causes a window to pop up telling me I need to install (the latest version of) Flash. I tried installing the tar.gz download, but it didn't work.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=69321][color=blue]Puppy Help 101 - an interactive tutorial for Lupu 5.25[/color][/url]

User avatar
MU
Posts: 13649
Joined: Wed 24 Aug 2005, 16:52
Location: Karlsruhe, Germany
Contact:

#148 Post by MU »

http://dotpups.de/dotpups/Internet/Flash7.pup
and
http://dotpups.de/puppy3/dotpups/Internet/Flash9.pup

They have a menu-entry to choose 7 or 9 (9 might be unstable on some sites, but others require it).

Mark

User avatar
WhoDo
Posts: 4428
Joined: Wed 12 Jul 2006, 01:58
Location: Lake Macquarie NSW Australia

#149 Post by WhoDo »

Flash wrote:1) How do I install it so that clicking on the desktop "browse" icon starts the new version? I can only start it by typing ./seamonkey in an rxvt window. I guess what I'm asking is, is it possible to replace the old version, and how do I do that?
Open /usr/local/bin/defaultbrowser file and edit as follows:

Code: Select all

#!/bin/sh
exec /usr/local/seamonkey/seamonkey "$@"
Seamonkey-1.1.7 is placed in a slightly different location than version 1.1.2 and earlier. Seamonkey-1.1.5/6/7 all update to the same directory now. Earlier versions used to create a separate directory including the version number, which made it hard to upgrade over the top rather than just adding another version.

Hope that helps

PS I've had no problems with Flash 9 and Java in Seamonkey-1.1.7 either.
[i]Actions speak louder than words ... and they usually work when words don't![/i]
SIP:whodo@proxy01.sipphone.com; whodo@realsip.com

yaknowwat
Posts: 11
Joined: Sun 27 Jan 2008, 04:02

#150 Post by yaknowwat »

Xorg Wizard that comes with puppy seems to not finish making the Xorg.conf file and that is why it doesn't have out of the box Multi Monitor support.

What it doesn't do is a detection on the second monitor, it declares it is there in one part but does not attempt to do a scan on the next monitor to generate the information and also it doesnt put a second screen section.

User avatar
Pizzasgood
Posts: 6183
Joined: Wed 04 May 2005, 20:28
Location: Knoxville, TN, USA

#151 Post by Pizzasgood »

Actually, if I remember right it's the parsing that's the problem. The xorgwizard runs Xorg -configure to generate an xorg.conf file, which Puppy then hacks apart based on what you choose in the wizard. I don't remember for sure, but I think when I ran that by hand and analyzed its output (/root/xorg.conf.new) it did have the extra screen section. I'd check it, but you can't run that command while X is going and I have important stuff running right now so restarting X isn't an option.

Anyways, if I'm right then Puppy puts in the serverlayout section without really looking at it, but only grabs a single monitor section. To fix it would probably be pretty simple. Just have it check the serverlayout section to see if there are multiple screens, then modify it a little to handle extra screens (don't just limit to two either, count the number in serverlayout).
[size=75]Between depriving a man of one hour from his life and depriving him of his life there exists only a difference of degree. --Muad'Dib[/size]
[img]http://www.browserloadofcoolness.com/sig.png[/img]

User avatar
RobertB
Posts: 145
Joined: Tue 03 Jan 2006, 01:06
Location: Big D
Contact:

#152 Post by RobertB »

Back to an old issue that doesn't seem to be resolved... after adding memory to my PC, the problem I was having with applications not coming up seemed to go away. But just now, the system froze up (as old boxes sometimes do), requiring a hard shutdown. When I brought Puppy back up, it was back to the bad times -- over a minute for Opera to come up. This time I thought to run Top, and it showed that Opera was never using more than 8.5% of CPU.

But that's enough for me -- I'm going to do a 2.17 frugal install, and see what I can learn about copying files from one installation to another. And I think I'll pay more attention to the suggestion that a frugal install is more flexible than a full HD install, like I've currently got.

maddox
Posts: 454
Joined: Fri 28 Sep 2007, 20:37
Location: sometimes in France

Pet memory management

#153 Post by maddox »

I've had probs decompressing pet's, no room left to decompress..
you have xxx blocks left and the pet needs xxxx blocks to decompress install..
There's enough displayed room left, seemingly,
but the ram has reached it's pre-determined safe limit
and Flushing the RAM, pup-save, has it's unionfs limits.

I know there are patches to (fix) that issue, but it doesn't cure it.
What about putting in the real file-size in the pet, as a variable
so the pet, petget manager could check if it could decompress and install ?
.

User avatar
Dingo
Posts: 1437
Joined: Tue 11 Dec 2007, 17:48
Location: somewhere at the end of rainbow...
Contact:

#154 Post by Dingo »

as written here

I have looked a very strange behaviour with upload. many times, uploading on youtube, connection is lost and i must reboot to have a new working connection and, finally, i must reboot again and turning on windows for upload to youtube

these problems affects all browser i have tried: seamonkey, firefox, opera, elinks, netsurf and dillo. may be a puppy problem?
replace .co.cc with .info to get access to stuff I posted in forum
dropbox 2GB free
OpenOffice for Puppy Linux

Wolf Pup
Posts: 637
Joined: Fri 28 Apr 2006, 01:37

#155 Post by Wolf Pup »

If anyone is having problems with X hanging on boot and then droping to a command line, try this:

Code: Select all

# Fix X hanging on some boots
/bin/rm /tmp/.X*-lock >> /tmp/xerrs.log 2>&1
it should be added to:
/usr/X11R7/bin/xwin

Code: Select all

[ -z $DISPLAY ] || exit #v2.11 from GuestToo.
echo "This script will run X windows for you..."

# Fix X hanging on some boots
/bin/rm /tmp/.X*-lock >> /tmp/xerrs.log 2>&1
save then reboot.
[img]http://img230.imageshack.us/img230/8595/ubd6467dp2.png[/img]
[url=http://www.tinyurl.com/54tu74]Visit The Repository[/url] - Helpful and hard-to-find treats for Puppy 3.
[url=http://www.tinyurl.com/c5a68f]Click Here for Puppy Support Chat, + Helpful Links.[/url]

r__hughes
Posts: 359
Joined: Thu 13 Apr 2006, 04:14
Location: Montreal, Canada

<SOLVED> Freememory box Help gives http error

#156 Post by r__hughes »

In my pup301 everything seems to work fine except this -

clicking on the blue freememory box at the bottom-right of desktop gives 3 choices

The 2nd & 3rd options (partview & KP0) work fine but the first (Help) doesnt - it brings up a Netsurf error - unable to display this 'http' page the /usr/share/doc/freememapplet.htm should apparently be accessed as

Code: Select all

file:///usr/share/doc/freememapplet.htm
- not as a http

Anybody else have this problem?

Anybody know of a quickfix for changing the /usr/sbin/freememapplet binary file to fix this (via a hexeditor) or failing this some kind of tricky indirect linking?
-----------------------------------------
edited 25FEB08
SOLVED - see trapster below
I changed my /usr/local/bin/defaulthtmlviewer" to this:
#!/bin/sh
exec netsurf "file://$@"
Last edited by r__hughes on Mon 25 Feb 2008, 22:14, edited 1 time in total.
--- quad booting Slacko57NPAE, Slacko56NPAE, Slacko55PAE (with OO4, devx, Gimp) & WXP on DELL Dimension 2400 PC & DELL Latitude 630 Laptop using grub.
---USB-Flash booting same on Samsung N110 WXP Netbook and Lenovo q100 WXP netPC.

User avatar
Dingo
Posts: 1437
Joined: Tue 11 Dec 2007, 17:48
Location: somewhere at the end of rainbow...
Contact:

#157 Post by Dingo »

Occasionally, from time to time, it happens when I open a program (eg gftp) leaves me a message no space left on device. I then replaced the file pup_save with a backup and can immediately resume using puppy, but this thing is boring. why this happens? I'm puppy 3.01. The 3.02 will correct these problems?
replace .co.cc with .info to get access to stuff I posted in forum
dropbox 2GB free
OpenOffice for Puppy Linux

User avatar
trapster
Posts: 2117
Joined: Mon 28 Nov 2005, 23:14
Location: Maine, USA
Contact:

#158 Post by trapster »

The 2nd & 3rd options (partview & KP0) work fine but the first (Help) doesnt - it brings up a Netsurf error - unable to display this 'http' page the /usr/share/doc/freememapplet.htm should apparently be accessed as
Code:
file:///usr/share/doc/freememapplet.htm
- not as a http

Anybody else have this problem?
I changed my /usr/local/bin/defaulthtmlviewer" to this:

Code: Select all

#!/bin/sh
exec netsurf "file://$@"
trapster
Maine, USA

Asus eeepc 1005HA PU1X-BK
Frugal install: Slacko
Currently using full install: DebianDog

r__hughes
Posts: 359
Joined: Thu 13 Apr 2006, 04:14
Location: Montreal, Canada

#159 Post by r__hughes »

Thank you Trapster your suggestion
I changed my /usr/local/bin/defaulthtmlviewer" to this:

Code: Select all

#!/bin/sh
exec netsurf "file://$@"
solved the problem - much obliged :)
--- quad booting Slacko57NPAE, Slacko56NPAE, Slacko55PAE (with OO4, devx, Gimp) & WXP on DELL Dimension 2400 PC & DELL Latitude 630 Laptop using grub.
---USB-Flash booting same on Samsung N110 WXP Netbook and Lenovo q100 WXP netPC.

User avatar
crabbypup
Posts: 91
Joined: Sun 20 Jan 2008, 21:49
Location: toronto canada

#160 Post by crabbypup »

hey, does anyone want to do a full bugfix for 3.01? and possibly post the iso? it would be very helpful. thanks. (i found that 3.01 had alot of bugs, so i have moved to TEENpup)
my avatar is what happens when you run windoze.

Post Reply