Extras for Puppy 2.12 - 2.16
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Extras for Puppy 2.12 - 2.16
Most drivers attached to this thread were updated in June 2009 and shifted to a new thread:
"Extra drivers for Puppy 2 with 2.6.18.1 kernel"
http://www.murga-linux.com/puppy/viewtopic.php?t=43653
"Extra drivers for Puppy 2 with 2.6.18.1 kernel"
http://www.murga-linux.com/puppy/viewtopic.php?t=43653
Last edited by tempestuous on Tue 16 Jun 2009, 14:35, edited 1 time in total.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Removed.
See "Extra drivers for Puppy 2 with 2.6.18.1 kernel"
http://www.murga-linux.com/puppy/viewtopic.php?t=43653
See "Extra drivers for Puppy 2 with 2.6.18.1 kernel"
http://www.murga-linux.com/puppy/viewtopic.php?t=43653
Last edited by tempestuous on Tue 16 Jun 2009, 13:59, edited 2 times in total.
I have been using Puppy 2.14R 1.01 with my ASUS EeePc. Thank you to pakt, Dougal and Tempestuous. Puppy 2.14R 1.01 works well with the EeePc, One needs to use Xorg video driver. I have tried the MadWiFi pet and it does work. I was able to connect to home wireless networking using WPA2 encryption with the Network wizard. I will test the wire Ethernet module that Tempestuous just posted and report on it.
Thanks again for the your efforts. Happy holidays to you!
Thanks again for the your efforts. Happy holidays to you!
Enjoy life, Just Greg
Live Well, Laugh Often, Love Much
Live Well, Laugh Often, Love Much
I installed and test the atl2 kernel module that Tempestuous posted. It works. After using the Puppy package manager to install the package, one has to reboot the machine. The driver is not recognized by the Network Wizard. One has to use in console (RXVT) "modprobe atl2" to install the module. Network wizard will then have connection eth0 and can set it up for proper operation.
Enjoy life, Just Greg
Live Well, Laugh Often, Love Much
Live Well, Laugh Often, Love Much
- Dougal
- Posts: 2502
- Joined: Wed 19 Oct 2005, 13:06
- Location: Hell more grotesque than any medieval woodcut
The network-wizard uses a fixed list of network drivers (/etc/networkdrivers or something).JustGreg wrote:I installed and test the atl2 kernel module that Tempestuous posted. It works. After using the Puppy package manager to install the package, one has to reboot the machine. The driver is not recognized by the Network Wizard.
What's the ugliest part of your body?
Some say your nose
Some say your toes
But I think it's your mind
Some say your nose
Some say your toes
But I think it's your mind
Thanks Dougal for the information. The file is networkmodules located in /etc directory. I have modified the file by adding a line for the atl2 module. I have a gzip archive of the file. Hopefully, it will upload. To use it, just unzip it in a directory other than /etc. Rename the existing networkmodules to networkmodules.org and then copy the new networkmodules to the /etc directory. I did test the modification on my EeePc and it worked. I hope this helps.
- Attachments
-
- networkmodules.gz
- (2.07 KiB) Downloaded 1369 times
Enjoy life, Just Greg
Live Well, Laugh Often, Love Much
Live Well, Laugh Often, Love Much
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Removed.
See "Extra drivers for Puppy 2 with 2.6.18.1 kernel"
http://www.murga-linux.com/puppy/viewtopic.php?t=43653
See "Extra drivers for Puppy 2 with 2.6.18.1 kernel"
http://www.murga-linux.com/puppy/viewtopic.php?t=43653
Last edited by tempestuous on Tue 16 Jun 2009, 14:04, edited 1 time in total.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Regarding the modem in the ASUS Eee, apparently it's a plug-in unit; a Conexant RD02-D110. Most Eee's are not supplied with this unit, and I have read that once installed, there is a bios upgrade necessary to enable it.
I downloaded ASUS's driver package for this modem, but the package overwrites the ALSA snd-hda-intel and snd-hda-codec modules, which might result in AUDIO problems.
Send me a PM if you want to try this modem driver.
I downloaded ASUS's driver package for this modem, but the package overwrites the ALSA snd-hda-intel and snd-hda-codec modules, which might result in AUDIO problems.
Send me a PM if you want to try this modem driver.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Here is the "nozomi" driver for certain models of GlobeTrotter GPRS/EDGE/UMTS/HSDPA wireless modems.
Refer to the compatibility list here http://www.pharscape.org/
This package installs the necessary device nodes; /dev/noz...
After installing this dotpet, load the module
Refer to the compatibility list here http://www.pharscape.org/
This package installs the necessary device nodes; /dev/noz...
After installing this dotpet, load the module
Code: Select all
modprobe nozomi
- Attachments
-
- nozomi-2.21alpha-k2.6.18.1.pet
- for Puppy 2.12-2.16
- (10.1 KiB) Downloaded 1121 times
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Removed.
See "Extra drivers for Puppy 2 with 2.6.18.1 kernel"
http://www.murga-linux.com/puppy/viewtopic.php?t=43653
See "Extra drivers for Puppy 2 with 2.6.18.1 kernel"
http://www.murga-linux.com/puppy/viewtopic.php?t=43653
Last edited by tempestuous on Tue 16 Jun 2009, 14:04, edited 1 time in total.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Here is the aha152x_cs module for Adaptec 152x PCMCIA SCSI interface cards, plus associated SCSI cdrom modules.
- Attachments
-
- aha152x_cs-k2.6.18.1.pet
- For Puppy2.12-2.16 and Puppy3-retro
- (73.39 KiB) Downloaded 1009 times