Nvidia drivers for Puppy 3.0

Stuff that has yet to be sorted into a category.
Message
Author
User avatar
gray
Posts: 316
Joined: Fri 23 Feb 2007, 22:42
Location: Adelaide - South Australia

Nvidia drivers for Puppy 3.0

#1 Post by gray »

For the new kernel (2.6.21.7) of Puppy 3.0 I have put together the set of three driver packages for nvidia cards.

nvidia-7186.pet for ancient nvidia graphics cards (riva TNT to Geforce 1).

nvidia-9643.pet for most nvidia cards (officially Gf2 to Gf4 but have tested on Gf7 OK).

nvidia-100.14.19.pet for latest cards (Gf5 to Gf8).

All available at http://download.tuxfamily.org/nop/

The pet packages install modified nvidia pkg1.run files to /tmp.
After this is complete drop out of X [ ctrl alt backspace ] and at the prompt enter install_nvidia and accept the defaults.
Then run xorgwizard and test the required resolution and finally run xwin.

raffy
Posts: 4798
Joined: Wed 25 May 2005, 12:20
Location: Manila

very useful

#2 Post by raffy »

This will be very useful for graphics-intensive play or work. Thanks, gray.

User avatar
cb88
Posts: 1165
Joined: Mon 29 Jan 2007, 03:12
Location: USA
Contact:

#3 Post by cb88 »

@ gray wow had already compiled the 9xxx driver for 3.00 and it had a nice postinstall script that you might like to take a look at: http://murga-linux.com/puppy/viewtopic.php?t=22204
Taking Puppy Linux to the limit of perfection. meanwhile try "puppy pfix=duct_tape" kernel parem eater.
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30

moncha
Posts: 24
Joined: Fri 14 Sep 2007, 16:06

#4 Post by moncha »

Thanks for the drivers. I've come to count on your drivers for every new puppy release. 8)

flagman
Posts: 21
Joined: Tue 28 Aug 2007, 00:35
Location: Flagstaff, AZ

Driver problem encountered with Geforce 6200LE

#5 Post by flagman »

Just a warning to those running a Geforce 6200LE video card, as I've had the same problem with this card and Nvidia drivers under Ubuntu.

After a successful driver install and reboot, video disappears except under Xorg (no video after CTRL+1 or 2). The card's output is profoundly affected as the monitor instantly goes into the sleep mode.

I reported this to Ubuntu as a possible bug. It was bumped to Nvidia as a suspected driver problem.

The solution under Ubuntu Feisty is to pass the kernel option "vga=771" (other values may also work) via grub . I've tried to do this under Puppy 3.0 but it's not worked - I boot from flash and the process appears different than with Ubuntu.

BTW, if anyone can advise as to how one adds or changes kernel boot options on a flash Puppy install, I'd appreciate hearing more.

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#6 Post by Lobster »

:? I tried (I also had ezpup installed) and got completely stuffed up.

Basically I was stuck with xorgwizard and Vesa, trying to change and tweak settings and get xorg working.

Nada. Nothing. Had to abandon ship - luckily I run from CD and just reverted to one of my other saved save files when rebooting

How are others getting on?

I tried (must have been the previous nvidia .pet with Linux Tmxxine Prism (also uses Ezpup) and that was fine . . .
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
sketchman
Posts: 294
Joined: Thu 01 Jun 2006, 17:20
Location: West Virginia, USA

#7 Post by sketchman »

Thanks again.

Got the 100.14.19 running my 8600. One weird problem, though. In puppy 2.17 I got upwards of 50fps with 3d demo in 3dcc. Now, I'm only getting 25 tops. Is that the driver's fault?
"In a world that exists without walls and fences, who needs Windows and Gates?"

User avatar
gray
Posts: 316
Joined: Fri 23 Feb 2007, 22:42
Location: Adelaide - South Australia

Nvidia Drivers

#8 Post by gray »

sketchman: I suspect the reason for the slow frame rate is that the driver has not installed correctly. I think there is something amiss with the nvidia installer :cry: .

At first the driver seems to install and work OK, but then when you save puppy and reboot (frugal install) there can be problems. I consistently get "invalid ELF header" error in xerrors.log and have been trying to figure out what is wrong :? .

Instead of using a custom nvidia pkg file and nvidia installer method I have gone back to just packaging up all the driver files into a pet package - as wow did for his 9643 pet. I have even pinched his pinstall.sh script (thanks for pointing that out cb88 :) )

So now there are 3 new nvidia driver pet packages at the tuxfamily download site above, hopefully these work OK.

NVIDIA-100.14.19-k2.6.21.7.pet
NVIDIA-964301-k2.6.21.7.pet
NVIDIA-718601-k2.6.21.7.pet

User avatar
sketchman
Posts: 294
Joined: Thu 01 Jun 2006, 17:20
Location: West Virginia, USA

#9 Post by sketchman »

Thank you, very much.

Getting 50's again.

:D Time for TORCS.
"In a world that exists without walls and fences, who needs Windows and Gates?"

User avatar
ecomoney
Posts: 2178
Joined: Fri 25 Nov 2005, 07:00
Location: Lincolnshire, England
Contact:

Creative GB0010

#10 Post by ecomoney »

Hi, I have tried this on my Creative Technology 3D Blaster Annihilator2 (32 MB) AGP Graphic Card, which from some research is a rebranded NVIDIA GeForce2 GTS using the NVIDIA-964301-k2.6.21.7.pet file.

First off I was pleased to see a graphical installation wizard (I didint have to exit X to the command line to install...always nice to see!). unfortunately after reinstall I couldnt restart x. Typing xorgwizard and setting up xorg didint work either, so at the moment Im using xvesa. Ive got a fresh 3.01 pup save file. I tried deleting /etc/X11/xorg.conf on making a copy of it from /etc/X11/xorg.conf.bak but xorg still wouldnt restart.

This card would be a good candidate for puppyfication as it doesnt have an XP driver. Is it compatible with the nvidia drivers?
Puppy Linux's [url=http://www.murga-linux.com/puppy/viewtopic.php?p=296352#296352]Mission[/url]

Sorry, my server is down atm!

User avatar
cb88
Posts: 1165
Joined: Mon 29 Jan 2007, 03:12
Location: USA
Contact:

#11 Post by cb88 »

@eco did you try running nvidia-xconfig?

i have had that problem too I think that your card is compatible there is just something else wrong maybe the diver didn't install correctly not really sure

but my card does indeed work with that driver I have the geforce2 400mx
Taking Puppy Linux to the limit of perfection. meanwhile try "puppy pfix=duct_tape" kernel parem eater.
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30

User avatar
gray
Posts: 316
Joined: Fri 23 Feb 2007, 22:42
Location: Adelaide - South Australia

GF2 GTS

#12 Post by gray »

The GF2 GTS is an old card - maybe the 7186 drivers will work better (but start with a fresh pupsave file).

User avatar
cb88
Posts: 1165
Joined: Mon 29 Jan 2007, 03:12
Location: USA
Contact:

#13 Post by cb88 »

http://www.nvidia.com/page/geforce2.html

geforce2 gts is a higher performance card than the 400mx and is about twice as powerfull(just by looking at factory specs not real life)

in fact he may need to use the latest diver since the gts has shaders making it a more modern card.... http://www.nvidia.com/page/geforce2.html

strangely nvidia directs you to the 9xxx driver for the 400mx and the 7xxx driver for the gts which is a higher end card (but more rare so maybe support is not as good?)

I don't think that either card is "oficially" supported anymore...since they arn't on the supported cards list
Taking Puppy Linux to the limit of perfection. meanwhile try "puppy pfix=duct_tape" kernel parem eater.
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30

User avatar
ecomoney
Posts: 2178
Joined: Fri 25 Nov 2005, 07:00
Location: Lincolnshire, England
Contact:

Correct

#14 Post by ecomoney »

The driver I needed was the older one that is, NVIDIA-718601-k2.6.21.7.pet . I have got the nvidia splash screen when I restarted x, doing some tests....
Puppy Linux's [url=http://www.murga-linux.com/puppy/viewtopic.php?p=296352#296352]Mission[/url]

Sorry, my server is down atm!

vampire666
Posts: 29
Joined: Thu 15 Nov 2007, 19:33

#15 Post by vampire666 »

Hi.
I'm a complete n00b of linux so please guys don't be harsh on me. :)

I have successfully installed puppy 3.01 on hard drive.
I have the screen image de-centered and doing some researches I came up to this thread.

Puppy is installed on a Celeron Mendocino 488Mhz, 128MB ram and Geforce2 MX 440.

I was wondering if installing these drivers (nvidia-9643.pet) would be a wise thing to do. Will it fix my de-centered image problem? Will I have a boots in performances? Will I risk to screw up things?

Thanks in advance.

P.S. If someone would be so kind to tell me how to install these drivers (or point me somewhere else) It would be great.

P.S.2. Puppy rules. Never dreamed to use my old computer again.

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#16 Post by Lobster »

I was wondering if installing these drivers (nvidia-9643.pet) would be a wise thing to do.
Very wise
Will it fix my de-centered image problem?
Yes

Will I have a boost in performances?
Probably not noticeable unless playing 3D games . . .

Will I risk to screw up things?
Yes. Always . . . but the beauty of Puppy is being able to screw up and boot up again - that is run from CD afresh

use wNOP aka Wobbly NOP
http://puppylinux.org/wikka/PuppyNOP
- that is cutting edge but your card is supported . . . :)
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

vampire666
Posts: 29
Joined: Thu 15 Nov 2007, 19:33

#17 Post by vampire666 »

Thanks a lot for your reply. :)

Wow, I just gave a look to Puppy NOP (with the link you gave me) and wow...very interesting.
Very nice graphics (it has implemented even compiz fusion!) and nice additions/changes.
I was just wondering if all those things will negatively affect my old system...the whole meaning of puppy was to give my old PC a new life, if I start using enhanced graphics it will use more ram and cpu I suppose. :wink: Am I wrong?

User avatar
cb88
Posts: 1165
Joined: Mon 29 Jan 2007, 03:12
Location: USA
Contact:

#18 Post by cb88 »

Installing 3d drivers will improve proformance for most any system... however you system might be too slow to run compiz... your graphics card is ok but your processor may be a little on the slow side...

you could try it out for kicks though... if it works please up load a video :-)
Taking Puppy Linux to the limit of perfection. meanwhile try "puppy pfix=duct_tape" kernel parem eater.
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30

vampire666
Posts: 29
Joined: Thu 15 Nov 2007, 19:33

#19 Post by vampire666 »

Since I have a backup image of the whole puppy partition (made with Acronis True Image ---> on windows partition)...I could try that for the comunity. :wink:
I hope that I can do it this weekend. :)

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#20 Post by Lobster »

Also try and cut down on the blood drinking vampire666 . . .
:oops:
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

Post Reply