Puppy Linux Discussion Forum

nic2109 · Last edited by nic2109 on Sat 20 Oct 2007, 08:13; edited 1 time in total

I have had three different problems with USB flash drive installations, but I'm not sure whether they are different problems or different symptoms of a single problem.

1) Puppy 3.0 final installed on a 1Gb flash drive with a 256Mb heavy encryption save file. Couldn't install EZpup-3.0 - too little space to expand the archive.

I tried to expand the save file by an additional 512Mb, but then Puppy wouldn't boot.

Re-installed into second setup.

2) Puppy 3.0 final installed on 1Gb flash drive as an HD install using the whole drive.

Same problem - insufficient space to expand EZpup-3.0 .PET archive.

Installed into third setup: a 2Gb flash drive with a 512 Mb save-file with heavy encryption.

Same problem. Tried to expand the save file by an additional 512Mb and re-boot.

3) Puppy 3.0 final on 2Gb flash drive with heavy encryption save file and a queued request to expand the save-file at next re-boot.

Re-booted OK but ignored the expand request. Still won't install EZpup-3.0.

Sad

SOLVED

=====

I don't actually know WHY it worked when previous methods didn't, but installation via MU's PSI application (aka "Puppy Software Installer") worked perfectly.

Also; it appears that not expanding encrypted save files is a feature not a bug! I read somewhere that Barry plans to change that, so it may appear in 3.02 or 3.1.

gray · Posted: Fri 12 Oct 2007, 06:12 Post subject: gxine

Just a quickie : gxine wont play ogg files - demuxer not found.

replaced the dmx file with one from 2.17 & it works -obviously the version in Puppy 3.0 is f****d.

RickyVaio · Joined: 12 May 2007 Posts: 37

Regarding my /bin/sh:can't access tty;job control turned off problems, I fixed it specifying the partition grub had to work on in ALL lines in menu.lst

My entry now looks like this:

wuwei · Joined: 15 Sep 2007 Posts: 773 Location: de

When running Puppy 3.00 as a LiveCD I continue to find these problems, even after the PPPOE-fix. (My internet connects through a DSL modem, no router)
Roaring Penguin starts and connects, but Firefox doesn't get access to the internet, neither does Thunderbird.
Same problem occurs in Firehydrant and TMXprism3BETA.
TMXprism3 doesn't even start Thunderbird, neither from the menu, nor a changed desktop icon, nor the console. Also why does TMX use the old mut again? The new one in 2.17 was much more pleasant to look at.

None of this occured in any version of 2.17 I have tested, not Puppy, not TMX, NOP, etc.
Could you please address these issues? Guess this is the 3rd time I have posted this.
Otherwise I am very pleased with Puppy, the 2.17 versions that is. You are doing an excellent job.

barker · Joined: 10 Jun 2006 Posts: 4

seems to have been a problem with this particular usb pendrive (although it worked with previous versions). Using a USB pendrive with only 1 partition solved the problem.

ecomoney · Posted: Sun 14 Oct 2007, 02:41 Post subject: Pfix = Ram

Just a quick polish, when booting from the cd "puppy pfix=ram" to boot into memory and ignore any save files, the loading screen still says "searching for save files".

cb88 · Joined: 28 Jan 2007 Posts: 1169 Location: USA

if you restart jwm while the menu is being rewriten (as when a dotpup is being installed) jwm gets really messed up

willhunt · Joined: 05 Oct 2005 Posts: 495

somehow I broke my new puppy Sad

anyone know if this is a 3.0 problem
or something I've done?
here is the error I get
# kp
couldn't load file "/usr/lib/tcl8.5/gnocl-0.9.91/gnocl.so": /usr/lib/libgtk-x11-2.0.so.0: undefined symbol: cairo_pdf_surface_create
while executing
"load /usr/lib/tcl8.5/gnocl-0.9.91/gnocl.so"
("package ifneeded Gnocl 0.9.91" script)
invoked from within
"package require Gnocl"
(file "/usr/sbin/kp" line 16)
#

/usr/lib/tcl8.5/gnocl-0.9.91/gnocl.so is there and there is no .wh. files
???

Leon · Joined: 22 Jun 2005 Posts: 220 Location: Slovenia

ecomoney · Posted: Mon 15 Oct 2007, 03:25 Post subject: No validation on pup_file choose

There is no validation when choosing the pup_save.2fs file at bootup, entering a numberd choice not on the list causes puppy to load into RAM. Should there be validation at this point? What would happen if the user booted into ram and then at shutdown chose the same name for a pup_file? Would this cause data to be overwritten or would the write fail and the session be lost?

edoc · Posted: Tue 16 Oct 2007, 21:27 Post subject:

I tried one of the solutions for 3.00 Frugal on my laptop with W2K and it trashed the
w2K boot if not the install.

GatorDog · Joined: 12 Sep 2006 Posts: 136

luck_gh0st · Joined: 11 Jul 2007 Posts: 28

same here === couldn't load file "/usr/lib/tcl8.5/gnocl-0.9.91/gnocl.so

Pvolume nor kp work but if I play a song in Gxine , the sound does work....
alsamixer works too.....

[/img]

luck_gh0st · Joined: 11 Jul 2007 Posts: 28

Oooooo k I've been racking my brains all night on this, and I found a cheap , dirty way to fix the above problem....
Simply put your Puppy 300 CD in and in the menu's setup tab use the puppy universal installer, do a Full install, and Upgrade, and when it asks about installing grub, just cancel.
now pmixer and the process killer are back!
I wonder what happened? something that I did notice was that everyone with this prob had used the EZpup, but it could just be coincidence.
Puppy is STILL the best!

alienjeff · Joined: 08 Jul 2006 Posts: 2290 Location: Winsted, CT - USA

Please resize screenshots. Sheesh.